9W7920 TRANSMISSION GP-PART 3 OF 3 TYPE 2 PART OF 9W3329 TRANSMISSION AR 436 BACKHOE LOADER

9W-7920: TRANSMISSION GP

9W7920 TRANSMISSION GP-PART 3 OF 3
TYPE 2
PART OF 9W3329 TRANSMISSION AR

Parts for your 436 BACKHOE LOADER:

Pos.	Part No	Qty	Parts name
1.	8T-1580	[2]	CUP
2.	8T-1581	[2]	CONE
3.	7T-2646 B	[1]	SHIM .100CM(.039IN)THK
4.	8T-2193	[1]	SEAL-LIP TYPE
5.	8E-2043	[1]	YOKE AS
6.	9W-5462	[1]	GEAR (4TH)
7.	6Y-2326	[1]	RING
8.	7T-3022	[2]	SLEEVE
9.	7T-3016	[1]	SYNCHRONIZER GP
10.	6T-9163 B	[1]	SHIM .0599CM(.024IN)THK
	6T-9164 B	[1]	SHIM .0178CM(.007IN)THK
	6T-9165 B	[1]	SHIM .0076CM(.003IN)THK
	6T-9166 B	[1]	SHIM .0051CM(.002IN)THK
11.	7T-2645	[1]	SPACER
12.	9W-5463	[1]	GEAR (3RD)
13.	7T-2647	[1]	SHAFT (OUTPUT)
14.	6T-9162	[1]	GEAR (35 TEETH)
15.	7T-3021	[1]	SYNCHRONIZER GP
16.	6Y-2936	[1]	SPACER
17.	6T-9160	[1]	GEAR (43 TEETH)
18.	6V-8500	[2]	BEARING
19.	7T-3017	[1]	SPACER
20.	7T-3018	[1]	SLEEVE
21.	9S-4191	[2]	PLUG-O-RING
22.	3J-1907	[2]	SEAL
23.	6Y-1341	[2]	SPRING
24.	014-5645	[4]	BALL
25.	7T-3102	[1]	ROD (UPPER)
26.	7T-3249	[4]	SCREW
27.	7T-3103	[2]	LUG
28.	7T-3101	[1]	FORK (UPPER)
29.	6V-8836 M	[2]	BOLT
30.	7T-3105	[1]	PLATE
31.	7T-3099	[1]	FORK (LOWER)
32.	7T-3100	[1]	ROD (LOWER)

			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE :
	6Y-1174		KIT-BEARING
	6Y-1175		KIT-CLUTCH PACK
	6Y-1176		KIT-WASHER
	6Y-1177		KIT-SNAP RING
	6Y-1178		KIT-SEAL
	B		USE AS REQUIRED
	M		METRIC PART

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 1 OF 4
TYPE 1. 4-WHEEL DRIVE
6Y7468-PAGE 104, 6Y3864-PAGE 105.01
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6T-9201	[1]	CLIP
2.	7T-3111	[1]	COVER
3.	6V-5217 M	[3]	BOLT (M8X1.25X20MM)
4.	7T-3108	[1]	SEAT
5.	6T-9209	[1]	GASKET
6.	7T-3107	[1]	LEVER
7.	7T-3109	[1]	PIN
8.	6Y-2007	[1]	SEAT
9.	6Y-2008	[1]	SEAL
10.	7T-3049	[1]	PLUG
11.	9W-5454	[1]	BOLT
12.	6V-8149 M	[1]	NUT (M12X1.75 THD)
13.	7T-3116	[1]	COVER
14.	6T-9200	[1]	GASKET
15.	6V-3822 M	[11]	BOLT (M10X1.50X35MM)
16.	5B-9628	[2]	WASHER
17.	6V-1819 M	[2]	BOLT (M10X1.50X100MM)
18.	6V-5842 M	[15]	BOLT (M10X1.50X40MM)
19.	6Y-1897	[1]	CASE-TMSN-REAR
20.	6T-9171	[1]	GASKET
21.	6Y-1896	[2]	PLUG AS-DRAIN
22.	3G-6927	[1]	ADAPTER
23.	6E-0924	[1]	FILTER-OIL
24.	4B-9786	[1]	BALL
25.	6Y-2036	[1]	SPRING
26.	7T-3174 B	[1]	GASKET .25MM(.010IN)THK
	7T-3175 B	[1]	GASKET .50MM(.020IN)THK
27.	6Y-2038	[1]	GUIDE-SPRING
28.	7T-3051	[1]	PLUG
29.	6V-8836 M	[4]	BOLT
30.	7T-3113	[1]	COVER
31.	9W-8109	[1]	HOUSING-CONVERTER
32.	9P-9150 C	[4]	WASHER
33.	6V-3918 M	[4]	BOLT (M8X1.25X50MM)
34.	6Y-3864 Y	[1]	PUMP GP-HYDRAULIC
35.	8T-9592	[1]	SEAL-LIP TYPE
36.	7X-4741	[1]	SEAL
37.	6V-8197 M	[8]	BOLT (M12X1.75X40MM)
38.	6V-5215 M	[3]	BOLT (M8X1.25X16MM)
39.	6Y-2004	[1]	COVER
40.	2M-9780	[1]	SEAL-O-RING (19.18MM ID)
41.	7T-2651	[1]	STRAINER
42.	6T-9202	[2]	PLUG
43.	9W-5458	[1]	TUBE AS
	9W-5456	[4]	WASHER
	9W-5457	[2]	FITTING
44.	9S-4191	[2]	PLUG-O-RING (9/16 X 18 THD)
45.	7T-3119	[1]	HOUSING
46.	6T-9197	[1]	GASKET
47.	6T-9184	[1]	GASKET
48.	8E-1593	[1]	CASE AS-FRONT
49.	7F-0880	[1]	GASKET-COPPER
50.	067-6044 C	[1]	PLUG
51.	6Y-0056	[1]	BALL
52.	7T-3129	[1]	SPRING
53.	3J-1907	[5]	SEAL (11.89MM ID)
54.	7T-3128	[1]	GUIDE
55.	8C-5492	[1]	SWITCH AS (NEUTRAL START)
56.	9B-7233	[2]	LOCKWASHER (4.27MM ID)
57.	6V-8376	[2]	SCREW-MACHINE (8-32X.25IN)
58.	7T-3130	[1]	PIN
59.	9W-5455	[1]	ADAPTER-VALVE
60.	6V-5218 M	[2]	BOLT (M8X1.25X35MM)
61.	6Y-7468 CY	[1]	VALVE GP-PRESSURE COMPENSATOR
62.	6V-5221 M	[4]	BOLT (M8X1.25X80MM)
63.	6V-0852	[1]	CAP-DUST
64.	6V-3965	[1]	NIPPLE AS
65.	7T-3251	[1]	BREATHER
66.	7T-3253	[4]	DOWEL
67.	7T-2649	[1]	PIPE AS
68.	9W-5460	[1]	RING
69.	4F-7952	[1]	SEAL-O-RING (37.7MM ID)
70.	6Y-2037	[1]	BODY-VALVE
71.	9M-7959	[1]	CLAMP
72.	6Y-2035	[1]	GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 2 OF 4
TYPE 1. 4-WHEEL DRIVE
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-1223 J	[2]	DISC-THRUST
2.	7T-8493 J	[2]	WASHER
3.	005-0469	[2]	CUP-ROLLER BEARING
4.	005-0471	[2]	CONE-BEARING
5.	7T-3034	[1]	SHIM 1.02MM(.04IN)THK
6.	6Y-1192	[4]	RING-SEAL
7.	6T-9142 B	[1]	SHIM .051MM(.002IN)THK
	6T-9143 B	[1]	SHIM .038MM(.002IN)THK
	6T-9144 B	[1]	SHIM .005MM(.0002IN)THK
	6T-9145 B	[1]	SHIM .180MM(.007IN)THK
	6T-9146 B	[1]	SHIM .127MM(.005IN)THK
	6T-9147 B	[1]	SHIM .076MM(.003IN)THK
8.	6Y-2006	[1]	GEAR AS-REVERSE
9.	7T-3036 J	[2]	WASHER
10.	8T-2151 L	[2]	RING
11.	6Y-1254 L	[2]	RETAINER
12.	274-4553 L	[14]	PLATE
13.	6Y-7929 L	[12]	DISC-FRICTION
14.	8T-2150 L	[2]	RING
15.	7T-3122 L	[2]	SPRING AS
16.	7T-3173 L	[2]	PISTON
17.	6T-9196 L	[2]	SEAL
18.	6T-9195	[2]	SEAL
19.	7T-3120	[1]	SHAFT AS (INPUT)
20.	7T-3035	[4]	PIN
21.	6Y-2005	[1]	GEAR AS-FORWARD
22.	7T-1514	[1]	NUT
23.	6H-0659	[1]	WASHER
24.	9W-5461	[1]	GEAR (REVERSE IDLER)
25.	6V-4636	[2]	CUP
26.	6V-4635	[2]	CONE
27.	7T-3045	[1]	SHIM 2.0MM(.079IN)THK
28.	7T-3040 B	[1]	SHIM .559MM(.022IN)THK
	7T-3041 B	[1]	SHIM .178MM(.007IN)THK
	7T-3042 B	[1]	SHIM .076MM(.003IN)THK
	7T-3043 B	[1]	SHIM .51MM(.020IN)THK
29.	7T-3044	[1]	SPACER
30.	7T-3046	[1]	GEAR (27 TEETH)
31.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
32.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
33.	8T-1580	[2]	CUP
34.	8T-1581	[2]	CONE
35.	9W-5464	[1]	GEAR (COUNTERSHAFT)
36.	6T-9167	[1]	GEAR (38 TEETH)
37.	6V-8501	[4]	BEARING
			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE
	6Y-1175 L	[1]	KIT-CLUTCH PACK
	6Y-1176 J	[1]	KIT-WASHER
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PARTS MARKED J
	L		KIT MARKED L SERVICES PARTS MARKED L

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 3 OF 4
TYPE 1. 4-WHEEL DRIVE
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1580	[2]	CUP
2.	8T-1581	[2]	CONE
3.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
4.	8T-2193	[1]	SEAL-LIP TYPE
5.	8E-2043	[1]	YOKE AS
6.	9W-5462	[1]	GEAR (4TH)
7.	6Y-2326	[1]	RING
8.	7T-3022	[2]	SLEEVE
9.	7T-3016	[1]	SYNCHRONIZER GP
10.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
	6T-9164 B	[1]	SHIM .178MM(.007IN)THK
	6T-9165 B	[1]	SHIM .076MM(.003IN)THK
	6T-9166 B	[1]	SHIM .051MM(.002IN)THK
11.	7T-2645	[1]	SPACER
12.	9W-5463	[1]	GEAR (3RD)
13.	7T-2647	[1]	SHAFT (OUTPUT)
14.	6T-9162	[1]	GEAR (35 TEETH)
15.	7T-3021	[1]	SYNCHRONIZER GP
16.	6T-9159	[1]	GEAR (37 TEETH)
17.	6T-9160	[1]	GEAR (43 TEETH)
18.	6V-8500	[2]	BEARING
19.	7T-3017	[1]	SPACER
20.	7T-3018	[1]	SLEEVE
21.	9S-4191	[2]	PLUG-O-RING
22.	3J-1907	[2]	SEAL
23.	6Y-1341	[2]	SPRING
24.	014-5645	[4]	BALL
25.	7T-3102	[1]	ROD
26.	7T-3249	[4]	SCREW
27.	7T-3103	[2]	LUG
28.	7T-3101	[1]	FORK
29.	6V-8836 M	[2]	BOLT
30.	7T-3105	[1]	PLATE
31.	7T-3099	[1]	FORK
32.	7T-3100	[1]	ROD
	B		USE AS REQUIRED
	M		METRIC PART

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 4 OF 4
TYPE 1. 4-WHEEL DRIVE
6T9519-PAGE 105
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4139 M	[1]	BOLT
2.	7T-3196	[1]	LOCK
3.	7T-3195	[1]	WASHER
4.	5P-8066	[1]	SEAL-O-RING
5.	7T-3194	[1]	YOKE
6.	8T-6716	[1]	SEAL-O-RING
7.	7T-3193	[2]	RING
8.	7T-3192	[1]	SLEEVE
9.	002-0754	[2]	CUP-ROLLER BEARING
10.	7T-3170	[1]	SHAFT AS
11.	9W-1741	[1]	PIN
12.	6T-9195	[2]	SEAL
13.	7T-3172	[1]	CYLINDER
14.	6T-9196	[1]	SEAL
15.	9W-5459	[1]	PISTON
16.	7T-3122 L	[1]	SPRING AS
17.	7T-3176	[1]	HUB
18.	6Y-7957	[7]	DISC-FRICTION
19.	7T-3177	[1]	DISC AS-CLUTCH
20.	7T-3178	[2]	WASHER
21.	7T-3179	[1]	SLEEVE
22.	7T-6655	[2]	BEARING
23.	6Y-2597	[1]	GEAR & DRUM AS (36 T)
24.	9N-4378 C	[1]	DISC-THRUST
25.	9W-1737	[1]	SPACER
26.	9W-2003	[1]	LOCKWASHER
27.	9W-3341	[1]	LOCKNUT
28.	7T-3183 B	[1]	SHIM .051MM(.002IN)THK
	7T-3184 B	[1]	SHIM .076MM(.003IN)THK
	7T-3185 B	[1]	SHIM .127MM(.005IN)THK
	7T-3186 B	[1]	SHIM .178MM(.007IN)THK
	7T-3187 B	[1]	SHIM .381MM(.015IN)THK
	7T-3188 B	[1]	SHIM .508MM(.020IN)THK
29.	9W-1734	[1]	SPACER
30.	6V-8499	[2]	CONE
31.	6T-9194	[6]	PLATE
32.	6V-7731 M	[4]	BOLT
33.	6Y-1142	[1]	ADAPTER AS
34.	8T-2193	[1]	SEAL-LIP TYPE
35.	6Y-1896	[1]	PLUG AS-DRAIN
36.	6Y-2003	[1]	CASE-TRANSFER
37.	7T-3253	[2]	DOWEL
38.	9W-1733	[1]	SEAT
39.	2D-6642	[1]	BALL
40.	9N-1747	[1]	SPRING
41.	7T-3615	[1]	GASKET
42.	7T-3191	[1]	COVER
43.	6V-6317 M	[4]	BOLT
44.	6V-5842 M	[4]	BOLT
45.	8T-5436 M	[4]	BOLT
46.	6T-9519 Y	[1]	SOLENOID AS
47.	9W-3340	[2]	SEAL-O-RING
48.	9S-4191	[1]	PLUG-O-RING
49.	3J-1907	[1]	SEAL
50.	7T-1552	[1]	SPOOL
51.	7T-2674	[1]	SPRING
52.	2M-9780	[1]	SEAL-O-RING
53.	7T-3620	[1]	PLUG
54.	9W-5450	[1]	SEAT-SPRING








			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE
	6Y-1174	[1]	KIT-BEARING
	6Y-1175 L	[1]	KIT-CLUTCH PACK
	6Y-1176 J	[1]	KIT-WASHER
	6Y-1177	[1]	KIT-SNAP RING
	6Y-1178	[1]	KIT-SEAL
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PARTS MARKED J
	L		KIT MARKED L SERVICES PARTS MARKED L
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 1 OF 4
TYPE 2. 4-WHEEL DRIVE
6Y7468-PAGE 104, 6Y3864-PAGE 105.01
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5V-9155	[1]	CLAMP-HOSE
2.	7T-3111	[1]	COVER
3.	6V-5217 M	[3]	BOLT (M8X1.25X20MM)
4.	7T-3108	[1]	SEAT
5.	6T-9209	[1]	GASKET
6.	7T-3107	[1]	LEVER
7.	7T-3109	[1]	PIN
8.	6Y-2007	[1]	SEAT
9.	6Y-2008	[1]	SEAL
10.	7T-3049	[1]	PLUG
11.	9W-5454	[1]	BOLT
12.	6V-8149 M	[1]	NUT (M12X1.75 THD)
13.	7T-3116	[1]	COVER
14.	6T-9200	[1]	GASKET
15.	6V-3822 M	[11]	BOLT (M10X1.50X35MM)
16.	5B-9628	[2]	WASHER
17.	6V-1819 M	[2]	BOLT (M10X1.50X100MM)
18.	6V-5842 M	[15]	BOLT (M10X1.50X40MM)
19.	6Y-1897	[1]	CASE-REAR TRANSMISSION
20.	6T-9171	[1]	GASKET
21.	6Y-1896	[1]	PLUG AS-DRAIN
22.	3G-6927	[1]	ADAPTER
23.	119-4740	[1]	FILTER-OIL
24.	4B-9786	[1]	BALL
25.	6Y-2036	[1]	SPRING
26.	7T-3174 B	[1]	GASKET (.25MM(.010IN)THK)
	7T-3175 B	[1]	GASKET (.50MM(.020IN)THK)
27.	6Y-2038	[1]	SPRING-GUIDE
28.	7T-3051	[1]	PLUG
29.	6V-8836 M	[4]	BOLT
30.	7T-3113	[1]	COVER
31.	9W-8109	[1]	HOUSING-CONVERTER
32.	9P-9150 C	[4]	WASHER
33.	6V-3918 M	[4]	BOLT (M8X1.25X50MM)
34.	6Y-3864 Y	[1]	PUMP GP-TRANSMISSION
35.	8T-9592	[1]	SEAL-LIP
36.	7X-4741	[1]	SEAL
37.	6V-8197 M	[8]	BOLT (M12X1.75X40MM)
38.	6V-5215 M	[3]	BOLT (M8X1.25X16MM)
39.	106-9861	[1]	PLATE-COVER
40.	2M-9780	[1]	SEAL-O-RING (19.18MM ID)
41.	7T-2651	[1]	STRAINER
42.	6T-9202	[2]	PLUG
43.	9W-5458	[1]	TUBE AS
	9W-5456	[4]	WASHER
	9W-5457	[2]	FITTING
44.	9S-4191	[2]	PLUG-O-RING (9/16 X 18 THD)
45.	7T-3119	[1]	HOUSING
46.	4F-7952	[1]	SEAL-O-RING (37.7MM ID)
47.	6T-9184	[1]	GASKET
48.	8E-1593	[1]	CASE AS-FRONT
49.	6Y-2035	[2]	GASKET
50.	9S-4191 C	[1]	PLUG-O-RING
51.	6Y-0056	[1]	BALL
52.	7T-3129	[1]	SPRING
53.	3J-1907	[5]	SEAL-O-RING (11.89MM ID)
54.	7T-3128	[1]	GUIDE
55.	8C-5492	[1]	SWITCH AS-BALL (NEUTRAL START)
56.	9B-7233	[2]	LOCKWASHER (4.27MM ID)
57.	6V-8376	[2]	SCREW-MACHINE (8-32X.25IN)
58.	7T-3130	[1]	PIN
59.	9W-5455	[1]	ADAPTER-VALVE
60.	6V-5218 M	[2]	BOLT (M8X1.25X35MM)
61.	6Y-7468 CY	[1]	VALVE GP-PRESSURE COMPENSATOR
62.	6V-5221 M	[4]	BOLT (M8X1.25X80MM)
63.	9M-7959	[1]	CLAMP
64.	6Y-2037	[1]	BODY-VALVE
65.	7T-3251	[1]	BREATHER
66.	7T-3253	[4]	DOWEL
67.	7T-2649	[1]	PIPE AS
68.	9W-5460	[1]	RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 2 OF 4
TYPE 2. 4-WHEEL DRIVE
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-1223 J	[2]	DISC-THRUST
2.	7T-8493 J	[2]	WASHER
3.	005-0469	[2]	CUP-ROLLER BEARING
4.	005-0471	[2]	CONE-BEARING
5.	7T-3034	[1]	SHIM 1.02MM(.04IN)THK
6.	6Y-1192	[4]	RING-SEAL
7.	6T-9142 B	[1]	SHIM .051MM(.002IN)THK
	6T-9143 B	[1]	SHIM .038MM(.002IN)THK
	6T-9144 B	[1]	SHIM .005MM(.0002IN)THK
	6T-9145 B	[1]	SHIM .180MM(.007IN)THK
	6T-9146 B	[1]	SHIM .127MM(.005IN)THK
	6T-9147 B	[1]	SHIM .076MM(.003IN)THK
8.	7T-3038 C	[1]	GEAR (20 T) (REVERSE)
9.	7T-3036 J	[2]	WASHER
10.	8T-2151 L	[2]	RING
11.	6Y-1254 L	[2]	RETAINER
12.	274-4553 L	[14]	PLATE
13.	6Y-7929 L	[12]	DISC-FRICTION
14.	8T-2150 L	[2]	RING
15.	7T-3122 L	[2]	SPRING AS
16.	7T-3173 L	[2]	PISTON
17.	6T-9196 L	[2]	SEAL
18.	8C-3078 C	[2]	SEAL-O-RING
19.	6Y-7466 C	[1]	SHAFT AS-INPUT
20.	7T-3035	[4]	PIN
21.	7T-3039 C	[1]	GEAR (20 T)
22.	7T-1514	[1]	NUT
23.	6H-0659	[1]	WASHER
24.	9W-5461	[1]	GEAR (REVERSE IDLER)
25.	6V-4636	[2]	CUP
26.	6V-4635	[2]	CONE
27.	7T-3045	[1]	SHIM 2.0MM(.079IN)THK
28.	7T-3040 B	[1]	SHIM .559MM(.022IN)THK
	7T-3041 B	[1]	SHIM .178MM(.007IN)THK
	7T-3042 B	[1]	SHIM .076MM(.003IN)THK
	7T-3043 B	[1]	SHIM .51MM(.020IN)THK
29.	7T-3044	[1]	SPACER
30.	7T-3046	[1]	GEAR (27 TEETH)
31.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
32.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
33.	8T-1580	[2]	CUP
34.	8T-1581	[2]	CONE
35.	9W-5464	[1]	GEAR (COUNTERSHAFT)
36.	6T-9167	[1]	GEAR (38 TEETH)
37.	6V-8501 C	[4]	BEARING
			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE
	6Y-1175 L	[1]	KIT-CLUTCH PACK
	6Y-1176 J	[1]	KIT-WASHER
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PARTS MARKED J
	L		KIT MARKED L SERVICES PARTS MARKED L

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 3 OF 4
TYPE 2. 4-WHEEL DRIVE
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1580	[2]	CUP
2.	8T-1581	[2]	CONE
3.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
4.	8T-2193	[1]	SEAL-LIP TYPE
5.	8E-2043	[1]	YOKE AS
6.	9W-5462	[1]	GEAR (4TH)
7.	6Y-2326	[1]	RING
8.	7T-3022	[2]	SLEEVE
9.	7T-3016	[1]	SYNCHRONIZER GP
10.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
	6T-9164 B	[1]	SHIM .178MM(.007IN)THK
	6T-9165 B	[1]	SHIM .076MM(.003IN)THK
	6T-9166 B	[1]	SHIM .051MM(.002IN)THK
11.	7T-2645	[1]	SPACER
12.	9W-5463	[1]	GEAR (3RD)
13.	7T-2647	[1]	SHAFT (OUTPUT)
14.	6T-9162	[1]	GEAR (35 TEETH)
15.	7T-3021	[1]	SYNCHRONIZER GP
16.	6T-9159	[1]	GEAR (37 TEETH)
17.	6T-9160	[1]	GEAR (43 TEETH)
18.	6V-8500	[2]	BEARING
19.	7T-3017	[1]	SPACER
20.	7T-3018	[1]	SLEEVE
21.	9S-4191	[2]	PLUG-O-RING
22.	3J-1907	[2]	SEAL
23.	6Y-1341	[2]	SPRING
24.	014-5645	[4]	BALL
25.	7T-3102	[1]	ROD
26.	7T-3249	[4]	SCREW
27.	7T-3103	[2]	LUG
28.	7T-3101	[1]	FORK
29.	6V-8836 M	[2]	BOLT
30.	7T-3105	[1]	PLATE
31.	7T-3099	[1]	FORK
32.	7T-3100	[1]	ROD
	B		USE AS REQUIRED
	M		METRIC PART

6Y-2598: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

6Y2598 TRANSMISSION GP-DIRECT DRIVE-PART 4 OF 4
TYPE 2. 4-WHEEL DRIVE
6T9519-PAGE 105
PART OF 9R5605 DRIVE-FRONT WHEEL
AN ATTACHMENT

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4139 M	[1]	BOLT
2.	7T-3196	[1]	LOCK
3.	7T-3195	[1]	WASHER
4.	5P-8066	[1]	SEAL-O-RING
5.	7T-3194	[1]	YOKE
6.	8T-6716	[1]	SEAL-O-RING
7.	9U-8886 C	[2]	RING-SEAL
8.	7T-3192	[1]	SLEEVE
9.	002-0754	[2]	CUP-ROLLER BEARING
10.	7T-3170	[1]	SHAFT AS
11.	9W-1741	[1]	PIN
12.	8C-3078 C	[2]	SEAL-O-RING
13.	7T-3172	[1]	CYLINDER
14.	6T-9196	[1]	SEAL
15.	9W-5459	[1]	PISTON
16.	7T-3122 L	[1]	SPRING AS
17.	7T-3176	[1]	HUB
18.	6Y-7957	[7]	DISC-FRICTION
19.	7T-3177	[1]	DISC AS-CLUTCH
20.	7T-3178	[2]	WASHER
21.	7T-3179	[1]	SLEEVE
22.	7T-6655	[2]	BEARING
23.	6Y-2597	[1]	GEAR & DRUM AS (36 T)
24.	9U-9392 C	[1]	DISC-THRUST
25.	9W-1737	[1]	SPACER
26.	9W-2003	[1]	LOCKWASHER
27.	9W-3341	[1]	LOCKNUT
28.	7T-3183 B	[1]	SHIM .051MM(.002IN)THK
	7T-3184 B	[1]	SHIM .076MM(.003IN)THK
	7T-3185 B	[1]	SHIM .127MM(.005IN)THK
	7T-3186 B	[1]	SHIM .178MM(.007IN)THK
	7T-3187 B	[1]	SHIM .381MM(.015IN)THK
	7T-3188 B	[1]	SHIM .508MM(.020IN)THK
29.	9W-1734	[1]	SPACER
30.	6V-8499	[2]	CONE
31.	6T-9194	[6]	PLATE
32.	6V-7731 M	[4]	BOLT
33.	6Y-1142	[1]	ADAPTER AS
34.	8T-2193	[1]	SEAL-LIP TYPE
35.	6Y-1896	[1]	PLUG AS-DRAIN
36.	6Y-2003	[1]	CASE-TRANSFER
37.	7T-3253	[2]	DOWEL
38.	7T-2674	[1]	SPRING
39.	2M-9780	[1]	SEAL-O-RING
40.	7T-3620	[1]	PLUG
41.	7T-3615	[1]	GASKET
42.	7T-3191	[1]	COVER
43.	6V-6317 M	[4]	BOLT
44.	6V-5842 M	[4]	BOLT
45.	8T-5436 M	[4]	BOLT
46.	6T-9519 Y	[1]	SOLENOID AS
47.	9W-3340	[2]	SEAL-O-RING
48.	9S-4191	[1]	PLUG-O-RING
49.	3J-1907	[1]	SEAL-O-RING
50.	7T-1552	[1]	SPOOL








			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE
	6Y-1174	[1]	KIT-BEARING
	6Y-1175 L	[1]	KIT-CLUTCH PACK
	6Y-1176 J	[1]	KIT-WASHER
	6Y-1177	[1]	KIT-SNAP RING
	6Y-1178	[1]	KIT-SEAL
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PARTS MARKED J
	L		KIT MARKED L SERVICES PARTS MARKED L
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

6Y-7468: VALVE GP-PRESSURE COMPENSATOR

VALVE GP-PRESSURE COMPENSATOR

6Y7468 VALVE GP-TRANSMISSION CONTROL
6T9519-PAGE 105
PART OF 6Y2598, 9W7920 TRANSMISSION

Parts for your 436 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8210 M	[1]	BOLT (M8X1.25X16MM)
2.	7T-2683	[1]	LEVER
3.	6V-8236	[1]	PIN-SPRING
4.	7T-2684	[1]	STOP
5.	7T-6183	[1]	PLUG
6.	6Y-3211	[1]	BODY AS-VALVE
7.	4B-9880	[1]	BALL
8.	6Y-4762	[1]	SPRING
9.	7T-2671	[1]	WASHER
10.	7T-2672	[1]	PLUG
11.	6T-9519 Y	[1]	SOLENOID AS
12.	7T-2679	[1]	VALVE
13.	7T-2676	[1]	SPRING (INNER)
14.	7T-2677	[1]	SPRING (OUTER)
15.	9W-2990	[1]	PISTON
16.	6T-9188	[1]	GASKET
17.	7T-2675	[1]	BODY
18.	6T-9187	[1]	GASKET
19.	9W-2989	[1]	COVER AS
20.	8T-2922 M	[3]	BOLT-SOCKET HEAD
21.	006-6803	[1]	BALL
22.	7T-2674	[1]	SPRING
23.	6V-5326	[1]	SEAL-O-RING (23.47MM ID)
24.	2Y-6120	[1]	WASHER
25.	7T-2673 M	[1]	SCREW-GUIDE
26.	6T-9189	[1]	GASKET
27.	115-2464	[1]	VALVE AS
28.	7T-5261	[1]	CLIP
29.	9S-4191	[1]	PLUG-O-RING (9/16 X 18 THD)
30.	3J-1907	[1]	SEAL-O-RING (11.89MM ID)
31.	9W-5451	[1]	TUBE AS
32.	7T-2669	[2]	WASHER
33.	7T-2681	[1]	SPRING
34.	9W-2988	[1]	SPOOL
35.	9W-2991	[2]	PLUG
36.	9W-5457	[2]	FITTING
37.	6Y-7465	[1]	VALVE
38.	6Y-5262	[1]	PIN-ROLL
39.	9W-5456	[4]	WASHER
40.	8E-9322	[1]	SPRING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

TRANSMISSION GP

Specifications

Introduction
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Torque Converter<BR> 3T9608 / 8E0735
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Transmission Shift Lever Adjustment
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Transmission<BR> 9W7920
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Systems Operation

Systems Operation
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Testing and Adjusting

Testing And Adjusting
416, 426, 428, 436, 438 & SERIES II BACKHOE LOADERS TRANSMIS

Bench Test Procedures

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Disassembly and Assembly

Engine, Torque Converter, Transmission
BACKHOE LOADER ENGINE

Transmission Control Valve Adapter
BACKHOE LOADERS POWER TRAIN

Transmission
BACKHOE LOADERS POWER TRAIN

Torque Converter
BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter, Transmission
BACKHOE LOADERS POWER TRAIN

Service Magazine

Tool Available For Aligning Torque Converter With Flywheel{0719,3101}
1988/06/06

New Thrust Discs Used In Transmission And Transfer Drive Groups{3060,3260}
1989/12/25

New Torque Converter Assembly Used In Transmission Arrangement{3101}
1990/01/29

New Shaft Assembly Provides Lubrication For Transmission Bearing{3063}
1990/04/16

New Yoke Assembly Used In Direct Drive Transmission Group{3060}
1990/05/14

New Torque On Reverse Idler Nut{3061}
1991/10/07

Parts Breakdown Of Transmission Rebuild Kits{3050}
1991/10/28

Correction to Specifications, SENR3131 for the End Play of the Idler Shaft {3060}
2000/07/31

Correction to the Transmission Assembly Procedure for Disassembly and Assembly Manual, SENR3133 {3150}
2000/08/28

New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 436 :

Truck sale:

6,400

Caterpillar MULTIPURPOSE.BUCKETS.414.THROUGH.436.PRE.F. MODELS, bucket, Construction
- bucket
MILTON CAT

2,000

Caterpillar FK94360W, telehandler, Construction

2,000

Caterpillar FK94360W, telehandler, Construction
- telehandler
FOLEY EQUIPMENT CO ATTACHMENTS

28.000

Caterpillar 436, baggerlader, Bau-Und Bergbauausrüstung

25,000

Caterpillar 436II, Construction
- backhoe loader
NMC