AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9U9495 TRANSMISSION GP-PART 1 OF 3 TYPE 1 9U9496-PAGE 129, 6Y3864-PAGE 131 PART OF 6I8196 TRANSMISSION AR 428B


POWER TRAIN
TRANSMISSION GP

BACKHOE LOADER 428B BACKHOE LOADER 7EJ
 428B BACKHOE LOADER 7EJ00001-05999 (MACHINE) POWERED BY 3054 DIESEL ENGINE SEBP1982 428B 7EJ   (1992)

POWER TRAIN

TRANSMISSION GP
8E-0735 TORQUE CONVERTER AS
MOUNTING GP-TRANSMISSION
9W-8111 MOUNTING GP-TRANSMISSION
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
 

#SEBP19820140
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 1 OF 3
TYPE 1
9U9496-PAGE 129, 6Y3864-PAGE 131
PART OF 6I8196 TRANSMISSION AR
c534863 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9201 [1] CLIP  
2. 7T-3111 [1] COVER  
3. 6V-5217 M [3] BOLT  
4. 7T-3108 [1] SEAT  
5. 6T-9209 [1] GASKET  
6. 7T-3107 [1] LEVER  
7. 7T-3109 [1] PIN  
8. 6Y-2007 [1] SEAT  
9. 6Y-2008 [1] SEAL  
10. 7T-3049 [1] PLUG  
11. 9W-5454 [1] BOLT  
12. 7T-8494 [1] COVER  
13. 7T-3116 [1] COVER  
14. 6T-9200 [1] GASKET  
15. 6V-3822 M [11] BOLT  
16. 5B-9628 [2] WASHER  
17. 6V-7981 M [2] BOLT  
18. 6V-5842 M [15] BOLT  
19. 6Y-1897 [1] CASE-TMSN-REAR  
20. 6T-9171 [1] GASKET  
21. 6Y-1896 [2] PLUG AS-DRAIN  
22. 3G-6927 [1] ADAPTER  
23. 6E-0924 [1] FILTER-OIL  
24. 6V-5218 M [2] BOLT  
25. 9M-7959 [1] CLAMP  
26. 7T-8536 [1] GASKET  
27. 4F-7952 [1] SEAL-O-RING  
28. 7T-3051 [1] PLUG  
29. 9W-5460 [1] RING  
30. 7T-2649 [1] PIPE AS  
31. 9W-8109 [1] HOUSING-CONVERTER  
32. 9P-9150 [4] WASHER  
33. 6V-3918 M [4] BOLT  
34. 6Y-3864 Y [1] PUMP GP-HYDRAULIC  
35. 8T-9592 [1] SEAL-LIP TYPE  
36. 7X-4741 [1] SEAL  
37. 6V-8197 M [8] BOLT  
38. 6V-5215 M [3] BOLT  
39. 6Y-2004 [1] COVER  
40. 7T-3253 [4] DOWEL  
41. 7T-2651 [1] STRAINER  
42. 6T-9202 [2] PLUG  
43. 7T-3251 [1] BREATHER  
44. 9S-4191 [3] PLUG-O-RING  
45. 7T-3119 [1] HOUSING  
46. 6T-9197 [1] GASKET  
47. 6T-9184 [1] GASKET  
48. 8E-1593 [1] CASE AS-FRONT  
49. 6V-8149 M [1] NUT  
50. 6Y-4429 [1] PLUG  
51. 4B-9782 [1] BALL  
52. 7T-3129 [1] SPRING  
53. 3J-1907 [5] SEAL  
54. 7T-3128 [1] GUIDE  
55. 7T-3113 [1] COVER  
56. 6V-8836 M [4] BOLT  
   
   
57. 6V-5221 M [4] BOLT  
58. 9U-9496 Y [1] VALVE GP-CONTROL  
59. 9W-7904 [1] ADAPTER-VALVE  
60. 6V-4248 M [8] BOLT  
61. 8C-5492 [1] SWITCH AS (NEUTRAL ST)  
62. 9B-7233 [2] LOCKWASHER  
63. 6V-8376 [2] SCREW-MACHINE  
64. 7T-3130 [1] PIN  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19820141
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 2 OF 3
TYPE 1
PART OF 6I8196 TRANSMISSION AR
c534865 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1223 [2] DISC-THRUST  
2. 7T-8493 [2] WASHER  
3. 005-0469 [2] CUP-ROLLER BEARING  
4. 005-0471 [2] CONE-BEARING  
5. 7T-3034 B [1] SHIM .100CM(.0394IN)THK  
6. 6Y-1192 [4] RING-SEAL  
7. 6T-9142 B [1] SHIM .0508CM(.020IN)THK  
  6T-9143 B [1] SHIM .0381CM(.015IN)THK  
  6T-9144 B [1] SHIM .00508CM(.002IN)THK  
  6T-9145 B [1] SHIM .01778CM(.007IN)THK  
  6T-9146 B [1] SHIM .0127CM(.005IN)THK  
  6T-9147 B [1] SHIM .00762CM(.003IN)THK  
8. 7T-3038 [1] GEAR (20 T) (REVERSE)  
9. 7T-3036 [2] WASHER  
10. 8T-2151 [2] RING  
11. 6Y-1254 [2] RETAINER  
12. 6T-9194 [14] PLATE  
13. 6Y-7929 [12] DISC-FRICTION  
14. 8T-2150 [2] RING  
15. 7T-3122 [2] SPRING AS  
16. 7T-3173 [2] PISTON  
17. 6T-9196 [2] SEAL  
18. 8C-3078 [2] SEAL-O-RING  
19. 6Y-7466 [1] SHAFT AS-INPUT  
20. 7T-3035 [4] PIN  
21. 7T-3039 [1] GEAR (20 T)  
22. 7T-1514 [1] NUT  
23. 6H-0659 [1] WASHER  
24. 9W-5461 [1] GEAR (REVERSE IDLER)  
25. 6V-4636 [2] CUP  
26. 6V-4635 [2] CONE  
27. 7T-3045 B [1] SHIM .200CM(.079IN)THK  
28. 7T-3040 B [1] SHIM .0559CM(.022IN)THK  
  7T-3041 B [1] SHIM .0178CM(.007IN)THK  
  7T-3042 B [1] SHIM .0076CM(.003IN)THK  
  7T-3043 B [1] SHIM .0051CM(.002IN)THK  
29. 7T-3044 [1] SPACER  
30. 7T-3046 [1] GEAR (27 TEETH)  
31. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
32. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
33. 8T-1580 [2] CUP  
34. 8T-1581 [2] CONE  
35. 9W-5464 [1] GEAR (COUNTERSHAFT)  
36. 6T-9167 [1] GEAR (38 TEETH)  
37. 6V-8501 [4] BEARING  
  B   USE AS REQUIRED
 

#SEBP19820142
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 3 OF 3
TYPE 1
PART OF 6I8196 TRANSMISSION AR
c534867 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1580 [2] CUP  
2. 8T-1581 [2] CONE  
3. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
4. 8T-2193 [1] SEAL-LIP TYPE  
5. 8E-2043 [1] YOKE AS  
6. 9W-5462 [1] GEAR (4TH)  
7. 6Y-2326 [1] RING  
8. 7T-3022 [2] SLEEVE  
9. 7T-3016 [1] SYNCHRONIZER GP  
10. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
  6T-9164 B [1] SHIM .0178CM(.007IN)THK  
  6T-9165 B [1] SHIM .0076CM(.003IN)THK  
  6T-9166 B [1] SHIM .0051CM(.002IN)THK  
11. 7T-2645 [1] SPACER  
12. 9W-5463 [1] GEAR (3RD)  
13. 7T-2647 [1] SHAFT (OUTPUT)  
14. 6T-9162 [1] GEAR (35 TEETH)  
15. 7T-3021 [1] SYNCHRONIZER GP  
16. 6Y-2936 [1] SPACER  
17. 6T-9160 [1] GEAR (43 TEETH)  
18. 6V-8500 [2] BEARING  
19. 7T-3017 [1] SPACER  
20. 7T-3018 [1] SLEEVE  
21. 9S-4191 [2] PLUG-O-RING  
22. 3J-1907 [2] SEAL  
23. 6Y-1341 [2] SPRING  
24. 014-5645 [4] BALL  
25. 7T-3102 [1] ROD (UPPER)  
26. 7T-3249 [4] SCREW  
27. 7T-3103 [2] LUG  
28. 7T-3101 [1] FORK (UPPER)  
29. 6V-8836 M [2] BOLT  
30. 7T-3105 [1] PLATE  
31. 7T-3099 [1] FORK (LOWER)  
32. 7T-3100 [1] ROD (LOWER)  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE :
  6Y-1174 KIT-BEARING  
  6Y-1175 KIT-CLUTCH PACK  
  6Y-1176 KIT-WASHER  
  6Y-1177 KIT-SNAP RING  
  6Y-1178 KIT-SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19820143
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 1 OF 3
TYPE 2
1096401-PAGE 129.01, 6Y3864-PAGE 131
PART OF 6I8196 TRANSMISSION AR
c597883 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9201 [1] CLIP  
2. 7T-3111 [1] COVER  
3. 6V-5217 M [3] BOLT (M8X1.25X20MM)  
4. 7T-3108 [1] SEAT  
5. 6T-9209 [1] GASKET  
6. 7T-3107 [1] LEVER  
7. 7T-3109 [1] PIN  
8. 6Y-2007 [1] SEAT  
9. 6Y-2008 [1] SEAL  
10. 7T-3049 [1] PLUG  
11. 9W-5454 [1] BOLT  
12. 7T-8494 [1] COVER  
13. 7T-3116 [1] COVER  
14. 6T-9200 [1] GASKET  
15. 6V-3822 M [11] BOLT (M10X1.50X35MM)  
16. 5B-9628 [2] WASHER  
17. 6V-7981 M [2] BOLT (M10X1.50X70MM)  
18. 6V-5842 M [15] BOLT (M10X1.50X40MM)  
19. 6Y-1897 [1] CASE-REAR TRANSMISSION  
20. 6T-9171 [1] GASKET  
21. 6Y-1896 C [1] PLUG AS-DRAIN  
22. 3G-6927 [1] ADAPTER  
23. 119-4740 [1] FILTER-OIL  
24. 6V-4248 M [8] BOLT (M10X1.50X25MM)  
25. 9M-7959 [1] CLAMP  
26. 7T-8536 [1] GASKET  
27. 4F-7952 [1] SEAL-O-RING  
28. 7T-3051 [1] PLUG  
29. 9W-5460 [1] RING  
30. 7T-2649 [1] PIPE AS  
31. 9W-8109 [1] HOUSING-CONVERTER  
32. 9P-9150 [4] WASHER  
33. 6V-3918 M [4] BOLT  
34. 6Y-3864 Y [1] PUMP GP-HYDRAULIC  
35. 8T-9592 [1] SEAL-LIP  
36. 7X-4741 [1] SEAL  
37. 6V-8197 M [8] BOLT  
38. 6V-5215 M [3] BOLT  
39. 106-9861 C [1] PLATE-COVER  
40. 7T-3253 [4] DOWEL  
41. 7T-2651 [1] STRAINER  
42. 6T-9202 [2] PLUG  
43. 7T-3251 [1] BREATHER  
44. 9S-4191 [3] PLUG-O-RING  
45. 7T-3119 [1] HOUSING  
46. 6T-9197 [1] GASKET  
47. 106-9860 C [1] GASKET-CONTROL  
48. 8E-1593 [1] CASE AS-FRONT  
49. 6V-8149 M [1] NUT  
50. 6Y-4429 [1] PLUG  
51. 109-6401 YC [1] VALVE GP-CONTROL  
52. 6V-8836 M [4] BOLT  
53. 3J-1907 C [3] SEAL-O-RING  
54. 7T-3113 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19820144
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 2 OF 3
PART OF 6I8196 TRANSMISSION AR
c534865 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1223 [2] DISC-THRUST  
2. 7T-8493 [2] WASHER  
3. 005-0469 [2] CUP-ROLLER BEARING  
4. 005-0471 [2] CONE-BEARING  
5. 7T-3034 B [1] SHIM .100CM(.0394IN)THK  
6. 6Y-1192 [4] RING-SEAL  
7. 6T-9142 B [1] SHIM .0508CM(.020IN)THK  
  6T-9143 B [1] SHIM .0381CM(.015IN)THK  
  6T-9144 B [1] SHIM .00508CM(.002IN)THK  
  6T-9145 B [1] SHIM .01778CM(.007IN)THK  
  6T-9146 B [1] SHIM .0127CM(.005IN)THK  
  6T-9147 B [1] SHIM .00762CM(.003IN)THK  
8. 7T-3038 [1] GEAR (20 T) (REVERSE)  
9. 7T-3036 [2] WASHER  
10. 8T-2151 [2] RING  
11. 6Y-1254 [2] RETAINER  
12. 6T-9194 [14] PLATE  
13. 6Y-7929 [12] DISC-FRICTION  
14. 8T-2150 [2] RING  
15. 7T-3122 [2] SPRING AS  
16. 7T-3173 [2] PISTON  
17. 6T-9196 [2] SEAL  
18. 8C-3078 [2] SEAL-O-RING  
19. 6Y-7466 [1] SHAFT AS-INPUT  
20. 7T-3035 [4] PIN  
21. 7T-3039 [1] GEAR (20 T)  
22. 7T-1514 [1] NUT  
23. 6H-0659 [1] WASHER  
24. 9W-5461 [1] GEAR (REVERSE IDLER)  
25. 6V-4636 [2] CUP  
26. 6V-4635 [2] CONE  
27. 7T-3045 B [1] SHIM .200CM(.079IN)THK  
28. 7T-3040 B [1] SHIM .0559CM(.022IN)THK  
  7T-3041 B [1] SHIM .0178CM(.007IN)THK  
  7T-3042 B [1] SHIM .0076CM(.003IN)THK  
  7T-3043 B [1] SHIM .0051CM(.002IN)THK  
29. 7T-3044 [1] SPACER  
30. 7T-3046 [1] GEAR (27 TEETH)  
31. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
32. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
33. 8T-1580 [2] CUP  
34. 8T-1581 [2] CONE  
35. 9W-5464 [1] GEAR (COUNTERSHAFT)  
36. 6T-9167 [1] GEAR (38 TEETH)  
37. 6V-8501 [4] BEARING  
  B   USE AS REQUIRED
 

#SEBP19820145
 

9U-9495: TRANSMISSION GP

9U9495 TRANSMISSION GP-PART 3 OF 3
PART OF 6I8196 TRANSMISSION AR
c534867 SEBP1982
9U9495 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1580 [2] CUP  
2. 8T-1581 [2] CONE  
3. 7T-2646 B [1] SHIM .100CM(.039IN)THK  
4. 8T-2193 [1] SEAL-LIP TYPE  
5. 8E-2043 [1] YOKE AS  
6. 9W-5462 [1] GEAR (4TH)  
7. 6Y-2326 [1] RING  
8. 7T-3022 [2] SLEEVE  
9. 7T-3016 [1] SYNCHRONIZER GP  
10. 6T-9163 B [1] SHIM .0599CM(.024IN)THK  
  6T-9164 B [1] SHIM .0178CM(.007IN)THK  
  6T-9165 B [1] SHIM .0076CM(.003IN)THK  
  6T-9166 B [1] SHIM .0051CM(.002IN)THK  
11. 7T-2645 [1] SPACER  
12. 9W-5463 [1] GEAR (3RD)  
13. 7T-2647 [1] SHAFT (OUTPUT)  
14. 6T-9162 [1] GEAR (35 TEETH)  
15. 7T-3021 [1] SYNCHRONIZER GP  
16. 6Y-2936 [1] SPACER  
17. 6T-9160 [1] GEAR (43 TEETH)  
18. 6V-8500 [2] BEARING  
19. 7T-3017 [1] SPACER  
20. 7T-3018 [1] SLEEVE  
21. 9S-4191 [2] PLUG-O-RING  
22. 3J-1907 [2] SEAL  
23. 6Y-1341 [2] SPRING  
24. 014-5645 [4] BALL  
25. 7T-3102 [1] ROD (UPPER)  
26. 7T-3249 [4] SCREW  
27. 7T-3103 [2] LUG  
28. 7T-3101 [1] FORK (UPPER)  
29. 6V-8836 M [2] BOLT  
30. 7T-3105 [1] PLATE  
31. 7T-3099 [1] FORK (LOWER)  
32. 7T-3100 [1] ROD (LOWER)  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE :
  6Y-1174 KIT-BEARING  
  6Y-1175 KIT-CLUTCH PACK  
  6Y-1176 KIT-WASHER  
  6Y-1177 KIT-SNAP RING  
  6Y-1178 KIT-SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19820146
 

8E-7681: TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 1 OF 4
TYPE 1
9U9496-PAGE 129, 6Y3864-PAGE 131
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT
c535372 SEBP1982
8E7681 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9201 [1] CLIP  
2. 7T-3111 [1] COVER  
3. 6V-5217 M [3] BOLT  
4. 7T-3108 [1] SEAT  
5. 6T-9209 [1] GASKET  
6. 7T-3107 [1] LEVER  
7. 7T-3109 [1] PIN  
8. 6Y-2007 [1] SEAT  
9. 6Y-2008 [1] SEAL  
10. 7T-3049 [1] PLUG  
11. 9W-5454 [1] BOLT  
12. 6V-8149 M [1] NUT  
13. 7T-3116 [1] COVER  
14. 6T-9200 [1] GASKET  
15. 6V-3822 M [11] BOLT  
16. 5B-9628 [2] WASHER  
17. 6V-7981 M [2] BOLT  
18. 6V-5842 M [15] BOLT  
19. 6Y-1897 [1] CASE-TMSN-REAR  
20. 6T-9171 [1] GASKET  
21. 6Y-1896 [2] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
22. 3G-6927 [1] ADAPTER  
23. 6E-0924 [1] FILTER-OIL  
24. 9W-5460 [1] RING  
25. 4F-7952 [1] SEAL-O-RING  
26. 7T-3174 B [1] GASKET .25MM(.010IN)THK  
  7T-3175 B [1] GASKET .50MM(.020IN)THK  
27. 9M-7959 [1] CLAMP  
28. 7T-3051 [1] PLUG  
29. 6V-8836 M [4] BOLT  
30. 7T-3113 [1] COVER  
31. 9W-8109 [1] HOUSING-CONVERTER  
32. 9P-9150 [4] WASHER  
33. 6V-3918 M [4] BOLT  
34. 6Y-3864 Y [1] PUMP GP-HYDRAULIC  
35. 8T-9592 [1] SEAL-LIP TYPE  
36. 7X-4741 [1] SEAL  
37. 6V-8197 M [8] BOLT  
38. 6V-5215 M [3] BOLT  
39. 6Y-2004 [1] COVER  
40. 7T-3251 [1] BREATHER  
41. 7T-2651 [1] STRAINER  
42. 6T-9202 [2] PLUG  
43. 9W-5458 [1] TUBE AS  
  9W-5456 [4] WASHER  
  9W-5457 [2] FITTING  
44. 9S-4191 [3] PLUG-O-RING  
45. 7T-3119 [1] HOUSING  
46. 6T-9197 [1] GASKET  
47. 6T-9184 [1] GASKET  
48. 8E-1593 [1] CASE AS-FRONT  
49. 7T-2649 [1] PIPE AS  
50. 7T-3253 [4] DOWEL  
51. 4B-9782 [1] BALL  
52. 7T-3129 [1] SPRING  
53. 3J-1907 [5] SEAL  
54. 7T-3128 [1] GUIDE  
55. 8C-5492 [1] SWITCH AS (NEUTRAL START)  
56. 9B-7233 [2] LOCKWASHER  
57. 6V-8376 [2] SCREW-MACHINE  
58. 7T-3130 [1] PIN  
59. 9W-5455 [1] ADAPTER-VALVE  
60. 6V-5218 M [2] BOLT  
61. 9U-9496 Y [1] VALVE GP-CONTROL  
62. 6V-5221 M [4] BOLT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP19820147
 

8E-7681: TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 2 OF 4
TYPE 1
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT
c535373 SEBP1982
8E7681 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-0897 J [2] DISC-THRUST  
2. 7T-8493 J [2] WASHER  
3. 005-0469 [2] CUP-ROLLER BEARING  
4. 005-0471 [2] CONE-BEARING  
5. 7T-3034 [1] SHIM 1.02MM(.04IN)THK  
6. 6Y-1192 [4] RING-SEAL  
7. 6T-9142 B [1] SHIM .051MM(.002IN)THK  
  6T-9143 B [1] SHIM .038MM(.002IN)THK  
  6T-9144 B [1] SHIM .005MM(.0002IN)THK  
  6T-9145 B [1] SHIM .180MM(.007IN)THK  
  6T-9146 B [1] SHIM .127MM(.005IN)THK  
  6T-9147 B [1] SHIM .076MM(.003IN)THK  
8. 7T-3038 [1] GEAR (20 T) (REVERSE)  
9. 7T-3036 J [2] WASHER  
10. 8T-2151 [2] RING  
11. 6Y-1254 [2] RETAINER  
12. 6T-9194 [14] PLATE  
13. 6Y-7929 [12] DISC-FRICTION  
14. 8T-2150 [2] RING  
15. 7T-3122 [2] SPRING AS  
16. 7T-3173 [2] PISTON  
17. 6T-9196 [2] SEAL  
18. 8C-3078 [2] SEAL-O-RING  
19. 6Y-7466 [1] SHAFT AS-INPUT  
20. 7T-3035 [4] PIN  
21. 7T-3039 [1] GEAR (20 T)  
22. 7T-1514 [1] NUT  
23. 6H-0659 [1] WASHER  
24. 9W-5461 [1] GEAR (REVERSE IDLER)  
25. 6V-4636 [2] CUP  
26. 6V-4635 [2] CONE  
27. 7T-3045 [1] SHIM 2.0MM(.079IN)THK  
28. 7T-3040 B [1] SHIM .559MM(.022IN)THK  
  7T-3041 B [1] SHIM .178MM(.007IN)THK  
  7T-3042 B [1] SHIM .076MM(.003IN)THK  
  7T-3043 B [1] SHIM .51MM(.020IN)THK  
29. 7T-3044 [1] SPACER  
30. 7T-3046 [1] GEAR (27 TEETH)  
31. 7T-2646 [1] SHIM 1.02MM(.040IN)THK  
32. 6T-9163 B [1] SHIM .599MM(.024IN)THK  
  6T-9164 B [1] SHIM .178MM(.007IN)THK  
  6T-9165 B [1] SHIM .076MM(.003IN)THK  
  6T-9166 B [1] SHIM .051MM(.002IN)THK  
33. 8T-1580 [2] CUP  
34. 8T-1581 [2] CONE  
35. 9W-5464 [1] GEAR (COUNTERSHAFT)  
36. 6T-9167 [1] GEAR (38 TEETH)  
37. 6V-8501 [4] BEARING  
  B   USE AS REQUIRED
 

#SEBP19820148
 

8E-7681: TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 3 OF 4
TYPE 1
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT
c517155 SEBP1982
8E7681 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1580 [2] CUP  
2. 8T-1581 [2] CONE  
3. 7T-2646 [1] SHIM 1.02MM(.040IN)THK  
4. 8T-2193 [1] SEAL-LIP TYPE  
5. 8E-2043 [1] YOKE AS  
6. 9W-5462 [1] GEAR (4TH)  
7. 6Y-2326 [1] RING  
8. 7T-3022 [2] SLEEVE  
9. 7T-3016 [1] SYNCHRONIZER GP  
10. 6T-9163 B [1] SHIM .599MM(.024IN)THK  
  6T-9164 B [1] SHIM .178MM(.007IN)THK  
  6T-9165 B [1] SHIM .076MM(.003IN)THK  
  6T-9166 B [1] SHIM .051MM(.002IN)THK  
11. 7T-2645 [1] SPACER  
12. 9W-5463 [1] GEAR (3RD)  
13. 7T-2647 [1] SHAFT (OUTPUT)  
14. 6T-9162 [1] GEAR (35 TEETH)  
15. 7T-3021 [1] SYNCHRONIZER GP  
16. 6T-9159 [1] GEAR (37 TEETH)  
17. 6T-9160 [1] GEAR (43 TEETH)  
18. 6V-8500 [2] BEARING  
19. 7T-3017 [1] SPACER  
20. 7T-3018 [1] SLEEVE  
21. 9S-4191 [2] PLUG-O-RING  
22. 3J-1907 [2] SEAL  
23. 6Y-1341 [2] SPRING  
24. 014-5645 [4] BALL  
25. 7T-3102 [1] ROD  
26. 7T-3249 [4] SCREW  
27. 7T-3103 [2] LUG  
28. 7T-3101 [1] FORK  
29. 6V-8836 M [2] BOLT  
30. 7T-3105 [1] PLATE  
31. 7T-3099 [1] FORK  
32. 7T-3100 [1] ROD  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19820149
 

8E-7681: TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 4 OF 4
TYPE 1
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT
c549664 SEBP1982
8E7681 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [1] BOLT  
2. 7T-3196 [1] LOCK  
3. 7T-3195 [1] WASHER  
4. 5P-8066 [1] SEAL-O-RING  
5. 7T-3194 [1] YOKE  
6. 8T-6716 [1] SEAL-O-RING  
7. 9U-8886 [2] RING-SEAL  
8. 7T-3192 [1] SLEEVE  
9. 002-0754 [2] CUP-ROLLER BEARING  
10. 7T-3170 [1] SHAFT AS  
11. 9W-1741 [1] PIN  
12. 8C-3078 [2] SEAL-O-RING  
13. 7T-3172 [1] CYLINDER  
14. 6T-9196 [1] SEAL  
15. 9W-5459 [1] PISTON  
16. 7T-3122 [1] SPRING AS  
17. 7T-3176 [1] HUB  
18. 6Y-7957 [8] DISC-FRICTION  
19. 7T-1552 [1] SPOOL  
20. 7T-3178 [2] WASHER  
21. 7T-3179 [1] SLEEVE  
22. 7T-6655 [2] BEARING  
23. 6I-8027 [1] GEAR & DRUM AS  
24. 9U-9392 [1] DISC-THRUST  
25. 9W-1737 [1] SPACER  
26. 9W-2003 [1] LOCKWASHER  
27. 9W-3341 [1] LOCKNUT  
28. 7T-3183 B [1] SHIM .051MM(.002IN)THK  
  7T-3184 B [1] SHIM .076MM(.003IN)THK  
  7T-3185 B [1] SHIM .127MM(.005IN)THK  
  7T-3186 B [1] SHIM .178MM(.007IN)THK  
  7T-3187 B [1] SHIM .381MM(.015IN)THK  
  7T-3188 B [1] SHIM .508MM(.020IN)THK  
29. 9W-1734 [1] SPACER  
30. 6V-8499 [2] CONE  
31. 6T-9194 [7] PLATE  
32. 6V-7731 M [4] BOLT  
33. 6Y-1142 [1] ADAPTER AS  
34. 8T-2193 [1] SEAL-LIP TYPE  
35. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
36. 6Y-2003 [1] CASE-TRANSFER  
37. 7T-3253 [2] DOWEL  
38. 7T-2674 [1] SPRING  
39. 2M-9780 [1] SEAL-O-RING  
40. 7T-3620 [1] PLUG  
41. 7T-3615 [1] GASKET  
42. 7T-3191 [1] COVER  
43. 6V-6317 M [4] BOLT  
44. 6V-5842 M [4] BOLT  
45. 8T-5436 M [4] BOLT  
46. 3E-7507 [1] SOLENOID-TRANSMISSION  
47. 8T-8729 [2] PIN-CONNECTOR  
48. 3E-3363 [1] RECEPTACLE AS  
49. 3E-3365 [1] WEDGE  
   
50. 2M-9780 [1] SEAL-O-RING  
51. 9W-3340 [2] SEAL-O-RING  
52. 9S-4191 [1] PLUG-O-RING  
53. 3J-1907 [1] SEAL-O-RING  
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  6Y-1174 [1] KIT-BEARING  
  6Y-1175 [1] KIT-CLUTCH PACK  
  6Y-1178 [1] KIT-SEAL  
  6Y-1177 [1] KIT-SNAP RING  
  6Y-1176 J [1] KIT-WASHER  
    (INCLUDES PARTS
    MARKED "J")
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Service Letter-NACD
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Technical Information Bulletin
Transmission Oil Filter Failures
Transmission Oil Filter Failures
Specifications
Torque Converter<BR> 8E-0735
416B, 426B, 428B, 436B, & 438B BACKHOE LOADER TRANSMISSION
Transmission<BR> 9W-7920, 8E-7681, 9U-9495
416B, 426B, 428B, 436B, & 438B BACKHOE LOADER TRANSMISSION
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Service Letter-Asia
Systems Operation
Systems Operation
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Testing and Adjusting
Testing And Adjusting
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Control Valve
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN
Transmission Control Valve Adapter
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN
Transmission And Torque Converter
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN
Transmission
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN
Engine, Torque Converter And Transmission
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN
Engine, Torque Converter And Transmission
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE
Front Engine Support
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE
Engine Rear Supports
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE
Service Magazine
Transmission Control Valve Changes On Backhoe Loaders {3150,3152}
1994/01/31
New Transmission Oil Filter With Improved Seal Area{3164}
1994/10/10
Improved Power Train Oil Filler Group Prevents Leakage {5070}
1996/09/02
New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 428B :

MOUNTING GP-TRANSMISSION
9W-8111 MOUNTING GP-TRANSMISSION
DRIVE GP-FLEXIBLE COUPLING
9W-1355 DRIVE GP-FLEXIBLE COUPLING
8E-0735 TORQUE CONVERTER AS
9R-8650 DRIVE AR-ALL WHEEL
6I-8196 TRANSMISSION AR
ALTERNATOR GP-CHARGING
3E-7295 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING*R
105-2812 ALTERNATOR GP-CHARGING*R
MOUNTING GP-ALTERNATOR
4P-3711 MOUNTING GP-ALTERNATOR
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP
9U-9495 TRANSMISSION GP
TRANSMISSION GP-DIRECT DRIVE
8E-7681 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
8E-7681 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
8E-7681 TRANSMISSION GP-DIRECT DRIVE

Truck sale:

 
On Request 
Caterpillar 428B, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
France
 
20,525 USD 
Caterpillar 428B, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
France
1993 CAT 428B
Call 
1993 CAT 428B

axx locations
CAT 428B
Call 
CAT 428B

Smeets & Zonen
Peer, BELGIUM, Belgium
1995 CAT 428B
 
1995 CAT 428B

Aurteneche
Nanclares De La Oca, ALAVA, Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.