8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 1 OF 4 TYPE 2 1096402-PAGE 129.03, 6Y3864-PAGE 131 PART OF 9R8650 DRIVE AR-AWD AN ATTACHMENT 428B

8E-7681: TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 1 OF 4
TYPE 2
1096402-PAGE 129.03, 6Y3864-PAGE 131
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6T-9201	[1]	CLIP
2.	7T-3111	[1]	COVER
3.	6V-5217 M	[3]	BOLT (M8X1.25X20MM)
4.	7T-3108	[1]	SEAT
5.	6T-9209	[1]	GASKET
6.	7T-3107	[1]	LEVER
7.	7T-3109	[1]	PIN
8.	6Y-2007	[1]	SEAT
9.	6Y-2008	[1]	SEAL
10.	7T-3049	[1]	PLUG
11.	9W-5454	[1]	BOLT
12.	6V-8149 M	[1]	NUT (M12X1.75 THD)
13.	7T-3116	[1]	COVER
14.	6T-9200	[1]	GASKET
15.	6V-3822 M	[11]	BOLT (M10X1.50X35MM)
16.	5B-9628	[2]	WASHER
17.	6V-1819 CM	[2]	BOLT (M10X1.50X100MM)
18.	6V-5842 M	[15]	BOLT (M10X1.50X40MM)
19.	6Y-1897	[1]	CASE-REAR TRANSMISSION
20.	6T-9171	[1]	GASKET
21.	6Y-1896 C	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
22.	3G-6927	[1]	ADAPTER
23.	119-4740	[1]	FILTER-OIL
24.	9W-5460	[1]	RING
25.	4F-7952	[1]	SEAL-O-RING
26.	7T-3174 B	[1]	GASKET .25MM(.010IN)THK
	7T-3175 B	[1]	GASKET .50MM(.020IN)THK
27.	9M-7959	[1]	CLAMP
28.	7T-3051	[1]	PLUG
29.	6V-8836 M	[4]	BOLT
30.	7T-3113	[1]	COVER
31.	9W-8109	[1]	HOUSING-CONVERTER
32.	9P-9150	[4]	WASHER
33.	6V-3918 M	[4]	BOLT (M8X1.25X50MM)
34.	6Y-3864 Y	[1]	PUMP GP-HYDRAULIC
35.	8T-9592	[1]	SEAL-LIP
36.	7X-4741	[1]	SEAL
37.	6V-8197 M	[8]	BOLT (M12X1.75X40MM)
38.	6V-5215 M	[3]	BOLT (M8X1.25X16MM)
39.	106-9861 C	[1]	PLATE-COVER
40.	7T-3251	[1]	BREATHER
41.	7T-2651	[1]	STRAINER
42.	6T-9202	[2]	PLUG
43.	9W-5458	[1]	TUBE AS
	9W-5456	[4]	WASHER
	9W-5457	[2]	FITTING
44.	9S-4191	[3]	PLUG-O-RING
45.	7T-3119	[1]	HOUSING
46.	6T-9197	[1]	GASKET
47.	106-9860 C	[1]	GASKET-CONTROL
48.	8E-1593	[1]	CASE AS-FRONT
49.	7T-2649	[1]	PIPE AS
50.	7T-3253	[4]	DOWEL
51.	6Y-2038 C	[1]	SPRING-GUIDE
52.	6Y-2037 C	[1]	BODY-VALVE
53.	3J-1907	[3]	SEAL-O-RING
54.	6Y-2035 C	[1]	GASKET
55.	4B-9786 C	[1]	BALL
56.	2M-9780 C	[1]	SEAL-O-RING
57.	109-6402 YC	[1]	VALVE GP-CONTROL
58.	6Y-2036	[1]	SPRING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

8E-7681: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 2 OF 4
TYPE 2
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7G-0897 J	[2]	DISC-THRUST
2.	7T-8493 J	[2]	WASHER
3.	005-0469	[2]	CUP-ROLLER BEARING
4.	005-0471	[2]	CONE-BEARING
5.	7T-3034	[1]	SHIM 1.02MM(.04IN)THK
6.	6Y-1192	[4]	RING-SEAL
7.	6T-9142 B	[1]	SHIM .051MM(.002IN)THK
	6T-9143 B	[1]	SHIM .038MM(.002IN)THK
	6T-9144 B	[1]	SHIM .005MM(.0002IN)THK
	6T-9145 B	[1]	SHIM .180MM(.007IN)THK
	6T-9146 B	[1]	SHIM .127MM(.005IN)THK
	6T-9147 B	[1]	SHIM .076MM(.003IN)THK
8.	7T-3038	[1]	GEAR (20 T) (REVERSE)
9.	7T-3036 J	[2]	WASHER
10.	8T-2151	[2]	RING
11.	6Y-1254	[2]	RETAINER
12.	6T-9194	[14]	PLATE
13.	6Y-7929	[12]	DISC-FRICTION
14.	8T-2150	[2]	RING
15.	7T-3122	[2]	SPRING AS
16.	7T-3173	[2]	PISTON
17.	6T-9196	[2]	SEAL
18.	8C-3078	[2]	SEAL-O-RING
19.	6Y-7466	[1]	SHAFT AS-INPUT
20.	7T-3035	[4]	PIN
21.	7T-3039	[1]	GEAR (20 T)
22.	7T-1514	[1]	NUT
23.	6H-0659	[1]	WASHER
24.	9W-5461	[1]	GEAR (REVERSE IDLER)
25.	6V-4636	[2]	CUP
26.	6V-4635	[2]	CONE
27.	7T-3045	[1]	SHIM 2.0MM(.079IN)THK
28.	7T-3040 B	[1]	SHIM .559MM(.022IN)THK
	7T-3041 B	[1]	SHIM .178MM(.007IN)THK
	7T-3042 B	[1]	SHIM .076MM(.003IN)THK
	7T-3043 B	[1]	SHIM .51MM(.020IN)THK
29.	7T-3044	[1]	SPACER
30.	7T-3046	[1]	GEAR (27 TEETH)
31.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
32.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
	6T-9164 B	[1]	SHIM .178MM(.007IN)THK
	6T-9165 B	[1]	SHIM .076MM(.003IN)THK
	6T-9166 B	[1]	SHIM .051MM(.002IN)THK
33.	8T-1580	[2]	CUP
34.	8T-1581	[2]	CONE
35.	9W-5464	[1]	GEAR (COUNTERSHAFT)
36.	6T-9167	[1]	GEAR (38 TEETH)
37.	6V-8501	[4]	BEARING
	B		USE AS REQUIRED

8E-7681: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 3 OF 4
TYPE 2
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1580	[2]	CUP
2.	8T-1581	[2]	CONE
3.	7T-2646	[1]	SHIM 1.02MM(.040IN)THK
4.	8T-2193	[1]	SEAL-LIP TYPE
5.	8E-2043	[1]	YOKE AS
6.	9W-5462	[1]	GEAR (4TH)
7.	6Y-2326	[1]	RING
8.	7T-3022	[2]	SLEEVE
9.	7T-3016	[1]	SYNCHRONIZER GP
10.	6T-9163 B	[1]	SHIM .599MM(.024IN)THK
	6T-9164 B	[1]	SHIM .178MM(.007IN)THK
	6T-9165 B	[1]	SHIM .076MM(.003IN)THK
	6T-9166 B	[1]	SHIM .051MM(.002IN)THK
11.	7T-2645	[1]	SPACER
12.	9W-5463	[1]	GEAR (3RD)
13.	7T-2647	[1]	SHAFT (OUTPUT)
14.	6T-9162	[1]	GEAR (35 TEETH)
15.	7T-3021	[1]	SYNCHRONIZER GP
16.	6T-9159	[1]	GEAR (37 TEETH)
17.	6T-9160	[1]	GEAR (43 TEETH)
18.	6V-8500	[2]	BEARING
19.	7T-3017	[1]	SPACER
20.	7T-3018	[1]	SLEEVE
21.	9S-4191	[2]	PLUG-O-RING
22.	3J-1907	[2]	SEAL
23.	6Y-1341	[2]	SPRING
24.	014-5645	[4]	BALL
25.	7T-3102	[1]	ROD
26.	7T-3249	[4]	SCREW
27.	7T-3103	[2]	LUG
28.	7T-3101	[1]	FORK
29.	6V-8836 M	[2]	BOLT
30.	7T-3105	[1]	PLATE
31.	7T-3099	[1]	FORK
32.	7T-3100	[1]	ROD
	B		USE AS REQUIRED
	M		METRIC PART

8E-7681: TRANSMISSION GP-DIRECT DRIVE

TRANSMISSION GP-DIRECT DRIVE

8E7681 TRANSMISSION GP-DIRECT DRIVE-PART 4 OF 4
TYPE 2
PART OF 9R8650 DRIVE AR-AWD
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4139 M	[1]	BOLT
2.	7T-3196	[1]	LOCK
3.	7T-3195	[1]	WASHER
4.	5P-8066	[1]	SEAL-O-RING
5.	7T-3194	[1]	YOKE
6.	8T-6716	[1]	SEAL-O-RING
7.	9U-8886	[2]	RING-SEAL
8.	7T-3192	[1]	SLEEVE
9.	002-0754	[2]	CUP-ROLLER BEARING
10.	7T-3170	[1]	SHAFT AS
11.	9W-1741	[1]	PIN
12.	8C-3078	[2]	SEAL-O-RING
13.	7T-3172	[1]	CYLINDER
14.	6T-9196	[1]	SEAL
15.	9W-5459	[1]	PISTON
16.	7T-3122	[1]	SPRING AS
17.	7T-3176	[1]	HUB
18.	6Y-7957	[8]	DISC-FRICTION
19.	7T-1552	[1]	SPOOL
20.	7T-3178	[2]	WASHER
21.	7T-3179	[1]	SLEEVE
22.	7T-6655	[2]	BEARING
23.	6I-8027	[1]	GEAR & DRUM AS
24.	9U-9392	[1]	DISC-THRUST
25.	9W-1737	[1]	SPACER
26.	9W-2003	[1]	LOCKWASHER
27.	9W-3341	[1]	LOCKNUT
28.	7T-3183 B	[1]	SHIM .051MM(.002IN)THK
	7T-3184 B	[1]	SHIM .076MM(.003IN)THK
	7T-3185 B	[1]	SHIM .127MM(.005IN)THK
	7T-3186 B	[1]	SHIM .178MM(.007IN)THK
	7T-3187 B	[1]	SHIM .381MM(.015IN)THK
	7T-3188 B	[1]	SHIM .508MM(.020IN)THK
29.	9W-1734	[1]	SPACER
30.	6V-8499	[2]	CONE
31.	6T-9194	[7]	PLATE
32.	6V-7731 M	[4]	BOLT
33.	6Y-1142	[1]	ADAPTER AS
34.	8T-2193	[1]	SEAL-LIP TYPE
35.	6Y-1896	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
36.	6Y-2003	[1]	CASE-TRANSFER
37.	7T-3253	[2]	DOWEL
38.	7T-2674	[1]	SPRING
39.	2M-9780	[1]	SEAL-O-RING
40.	7T-3620	[1]	PLUG
41.	7T-3615	[1]	GASKET
42.	7T-3191	[1]	COVER
43.	6V-6317 M	[4]	BOLT
44.	6V-5842 M	[4]	BOLT
45.	8T-5436 M	[4]	BOLT
46.	3E-7507	[1]	SOLENOID-TRANSMISSION
47.	8T-8729	[2]	PIN-CONNECTOR
48.	3E-3363	[1]	RECEPTACLE AS
49.	3E-3365	[1]	WEDGE

50.	2M-9780	[1]	SEAL-O-RING
51.	9W-3340	[2]	SEAL-O-RING
52.	9S-4191	[1]	PLUG-O-RING
53.	3J-1907	[1]	SEAL-O-RING
			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE:
	6Y-1174	[1]	KIT-BEARING
	6Y-1175	[1]	KIT-CLUTCH PACK
	6Y-1178	[1]	KIT-SEAL
	6Y-1177	[1]	KIT-SNAP RING
	6Y-1176 J	[1]	KIT-WASHER
			(INCLUDES PARTS
			MARKED "J")
	B		USE AS REQUIRED
	M		METRIC PART

6Y-7468: VALVE GP-PRESSURE COMPENSATOR

VALVE GP-PRESSURE COMPENSATOR

6Y7468 VALVE GP-PRESSURE COMPENSATOR
6T9519-PAGE 130
PART OF 9U9495 TRANSMISSION & 8E7681 TRANSMISSION-DIRECT DRIVE

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8210 M	[1]	BOLT (M8X1.25X16MM)
2.	7T-2683	[1]	LEVER
3.	6V-8236	[1]	PIN-SPRING
4.	7T-2684	[1]	STOP
5.	7T-6183	[1]	PLUG
6.	6Y-3211	[1]	BODY AS-VALVE
7.	4B-9880	[1]	BALL
8.	6Y-4762	[1]	SPRING
9.	7T-2671	[1]	WASHER
10.	7T-2672	[1]	PLUG
11.	6T-9519 Y	[1]	SOLENOID AS
12.	7T-2679	[1]	VALVE
13.	7T-2676	[1]	SPRING (INNER)
14.	7T-2677	[1]	SPRING (OUTER)
15.	9W-2990	[1]	PISTON
16.	6T-9188	[1]	GASKET
17.	7T-2675	[1]	BODY
18.	6T-9187	[1]	GASKET
19.	9W-2989	[1]	COVER AS
20.	8T-2922 M	[3]	BOLT-SOCKET HEAD
21.	006-6803	[1]	BALL
22.	7T-2674	[1]	SPRING
23.	6V-5326	[1]	SEAL-O-RING (23.47MM ID)
24.	2Y-6120	[1]	WASHER
25.	7T-2673 M	[1]	SCREW-GUIDE
26.	6T-9189	[1]	GASKET
27.	115-2464	[1]	VALVE AS
28.	7T-5261	[1]	CLIP
29.	9S-4191	[1]	PLUG-O-RING (9/16 X 18 THD)
30.	3J-1907	[1]	SEAL-O-RING (11.89MM ID)
31.	9W-5451	[1]	TUBE AS
32.	7T-2669	[2]	WASHER
33.	7T-2681	[1]	SPRING
34.	9W-2988	[1]	SPOOL
35.	9W-2991	[2]	PLUG
36.	9W-5457	[2]	FITTING
37.	6Y-7465	[1]	VALVE
38.	6Y-5262	[1]	PIN-ROLL
39.	9W-5456	[4]	WASHER
40.	8E-9322	[1]	SPRING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

9U-9496: VALVE GP-CONTROL

VALVE GP-CONTROL

9U9496 VALVE GP-CONTROL
PART OF 8E7681 TRANSMISSION AR & 9U9495 TRANSMISSION
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5215 M	[1]	BOLT (M8X1.25X16MM)
2.	7T-2683	[1]	LEVER
3.	6V-8236	[1]	PIN-SPRING
4.	7T-2684	[1]	STOP
5.	7T-6183	[1]	PLUG
6.	6Y-3211	[1]	BODY AS-VALVE
7.	4B-9880	[1]	BALL
8.	6Y-4762	[1]	SPRING
9.	7T-2671	[1]	WASHER
10.	7T-2672	[1]	PLUG
11.	3E-7507	[1]	SOLENOID-TRANSMISSION
12.	8T-8729	[2]	PIN-CONNECTOR
13.	3E-3363	[1]	RECEPTACLE AS
14.	3E-3365	[1]	WEDGE
15.	2M-9780	[1]	SEAL-O-RING
16.	6T-9188	[1]	GASKET
17.	7T-2675	[1]	BODY
18.	6T-9187	[1]	GASKET
19.	9W-2989	[1]	COVER AS
20.	8T-2922 M	[3]	BOLT-SOCKET HEAD
21.	006-6803	[1]	BALL
22.	7T-2674	[1]	SPRING
23.	6V-5326	[1]	SEAL-O-RING
24.	2Y-6120	[1]	WASHER
25.	7T-2673 M	[1]	SCREW-GUIDE
26.	6T-9189	[1]	GASKET
27.	6Y-7464	[1]	VALVE AS
28.	7T-5261	[1]	CLIP
29.	9S-4191	[1]	PLUG-O-RING (9/16 X 18 THD)
30.	3J-1907	[1]	SEAL-O-RING (11.89MM ID)
31.	9W-5451	[1]	TUBE AS
32.	7T-2669	[2]	WASHER
33.	7T-2681	[1]	SPRING
34.	9W-2988	[1]	SPOOL
35.	9W-2991	[2]	PLUG
36.	9W-5457	[2]	FITTING
37.	6Y-7465	[1]	VALVE
38.	6Y-5262	[1]	PIN-ROLL
39.	9W-5456	[4]	WASHER
40.	8E-9322	[1]	SPRING
41.	7T-2679	[1]	VALVE
42.	7T-2676	[1]	SPRING (INNER)
43.	7T-2677	[1]	SPRING (OUTER)
44.	9W-2990	[1]	PISTON
	M		METRIC PART

109-6401: VALVE GP-TRANSMISSION CONTROL

VALVE GP-TRANSMISSION CONTROL

1096401 VALVE GP-CONTROL
PART OF 9U9495 TRANSMISSION

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-9856	[1]	VALVE-SELECTOR
2.	7T-5261	[1]	CLIP
3.	7T-2676	[1]	SPRING
4.	3J-1907	[4]	SEAL-O-RING (11.89MM ID)
5.	4B-9880	[4]	BALL
6.	7T-2684	[1]	STOP
7.	6V-5326	[1]	SEAL-O-RING
8.	6V-8236	[1]	PIN-SPRING
9.	6V-5215 M	[1]	BOLT (M8X1.25X16MM)
10.	7T-2683	[1]	LEVER
11.	6Y-4762	[1]	SPRING
12.	106-7989	[1]	PLUG-SPOOL
13.	2M-9780	[2]	SEAL-O-RING (19.18MM ID)
14.	109-6403	[1]	PLUG
15.	7T-2677	[1]	SPRING
16.	7T-2679	[1]	VALVE
17.	7T-2681	[1]	SPRING
18.	9S-4191	[2]	PLUG-O-RING (9/16-18THD)
19.	111-1717	[1]	SPOOL-FLOW DIVIDER
20.	4B-9782	[1]	BALL
21.	7T-3129	[1]	SPRING
22.	7T-3128	[1]	GUIDE
23.	8E-9322	[1]	SPRING
24.	116-3151	[1]	SPOOL-DUMP
25.	2Y-6120	[1]	WASHER
26.	8C-5748 M	[4]	BOLT
27.	6Y-5262	[1]	PIN-ROLL
28.	5P-8347 M	[2]	BOLT (M8X1.25X70MM)
29.	7T-2673 M	[1]	SCREW-GUIDE
30.	8C-5492	[1]	SWITCH AS (BALL)
31.	6V-8376	[2]	SCREW-MACHINE (8-32X.25 IN)
32.	9B-7233	[2]	LOCKWASHER (NO.8)
33.	3E-7507	[1]	SOLENOID-TRANSMISSION
34.	2M-9780	[1]	SEAL-O-RING (19.18MM ID)
35.	8T-8729	[2]	PIN-CONNECTOR
36.	102-8802	[1]	KIT-RECEPTACLE
37.	3E-3365	[1]	WEDGE
	M		METRIC PART

109-6402: VALVE GP-TRANSMISSION CONTROL

VALVE GP-TRANSMISSION CONTROL

1096402 VALVE GP-CONTROL
PART OF 8E7681 TRANSMISSION-DIRCT DRIVE
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-9856	[1]	VALVE-SELECTOR
2.	7T-5261	[1]	CLIP
3.	7T-2676	[1]	SPRING
4.	3J-1907	[4]	SEAL-O-RING (11.89MM ID)
5.	4B-9880	[4]	BALL
6.	7T-2684	[1]	STOP
7.	6V-5326	[1]	SEAL-O-RING
8.	6V-8236	[1]	PIN-SPRING
9.	6V-5215 M	[1]	BOLT (M8X1.25X16MM)
10.	7T-2683	[1]	LEVER
11.	6Y-4762	[1]	SPRING
12.	106-7989	[1]	PLUG-SPOOL
13.	2M-9780	[2]	SEAL-O-RING (19.18MM ID)
14.	109-6403	[1]	PLUG
15.	7T-2677	[1]	SPRING
16.	7T-2679	[1]	VALVE
17.	7T-2681	[1]	SPRING
18.	9S-4191	[2]	PLUG-O-RING (9/16-18THD)
19.	111-1717	[1]	SPOOL-FLOW DIVIDER
20.	4B-9782	[1]	BALL
21.	7T-3129	[1]	SPRING
22.	7T-3128	[1]	GUIDE
23.	8E-9322	[1]	SPRING
24.	116-3151	[1]	SPOOL-DUMP
25.	2Y-6120	[1]	WASHER
26.	8C-5748 M	[4]	BOLT
27.	6Y-5262	[1]	PIN-ROLL
28.	5P-8347 M	[2]	BOLT (M8X1.25X70MM)
29.	7T-2673 M	[1]	SCREW-GUIDE
30.	8C-5492	[1]	SWITCH AS
31.	6V-8376	[2]	SCREW-MACHINE (8-32X.25 IN)
32.	9B-7233	[2]	LOCKWASHER (NO.8)
33.	3E-7507	[1]	SOLENOID-TRANSMISSION
34.	2M-9780	[1]	SEAL-O-RING (19.18MM ID)
35.	8T-8729	[2]	PIN-CONNECTOR
36.	102-8802	[1]	KIT-RECEPTACLE
37.	3E-3365	[1]	WEDGE
	M		METRIC PART

6T-9519: SOLENOID AS

SOLENOID AS

6T9519 SOLENOID AS
PART OF 6Y7468 VALVE-PRESSURE COMPENSATOR
AN ATTACHMENT

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-1266	[1]	SOLENOID GP (12VDC-LISKGW)
			-OR-
2.	6T-9517	[1]	SOLENOID AS
			(12VDC-SYNCHRO-START)
			(EA. SOLENOID
			INCLUDES)
3.	7N-9737	[1]	HOUSING-PLUG
4.	7N-7780	[1]	PIN-CONNECTOR
5.	7N-7779	[1]	SOCKET
6.	2M-9780	[1]	SEAL-O-RING

6Y-4341: PUMP GP-CRESCENT

PUMP GP-CRESCENT

6Y4341 PUMP GP-CRESCENT
{9P3233 PUMP GP-GEROTOR}
PART OF 6Y3864 PUMP-HYDRAULIC

Parts for your 428B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	8T-9592	[1]	SEAL-LIP TYPE

Information:

POWER TRAIN

TRANSMISSION GP

Special Instruction

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Service Letter-NACD

Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Technical Information Bulletin

Transmission Oil Filter Failures
Transmission Oil Filter Failures

Specifications

Torque Converter<BR> 8E-0735
416B, 426B, 428B, 436B, & 438B BACKHOE LOADER TRANSMISSION

Transmission<BR> 9W-7920, 8E-7681, 9U-9495
416B, 426B, 428B, 436B, & 438B BACKHOE LOADER TRANSMISSION

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive

Service Letter-Asia

Systems Operation

Systems Operation
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Service Letter-APD

Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive
Product Support Program For Replacing The Transmission Directional Control Valve On Certain 416B, 426B, 428B, 436B, And 438B Backhoe Loaders Equipped With 4-Wheel Drive

Testing and Adjusting

Testing And Adjusting
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION

Bench Test Procedures

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Disassembly and Assembly

Transmission Control Valve
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN

Transmission Control Valve Adapter
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN

Transmission And Torque Converter
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN

Transmission
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter And Transmission
416B, 426B, 428B, 436B & 438B BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter And Transmission
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE

Front Engine Support
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE

Engine Rear Supports
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE

Service Magazine

Transmission Control Valve Changes On Backhoe Loaders {3150,3152}
1994/01/31

New Transmission Oil Filter With Improved Seal Area{3164}
1994/10/10

Improved Power Train Oil Filler Group Prevents Leakage {5070}
1996/09/02

New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 428B :

Truck sale:

On Request

Caterpillar 428B, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
France

20,525 USD

Caterpillar 428B, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
France

Call

1993 CAT 428B

axx locations

Call

CAT 428B

Smeets & Zonen
Peer, BELGIUM, Belgium

1995 CAT 428B

Aurteneche
Nanclares De La Oca, ALAVA, Spain