AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

875079 LINES GP-TRACK MOTOR-PART 2 OF 2 S/N 2SK139-UP 325 LN EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-TRAVEL MOTOR
SWIVEL GP
LINES GP-SWING
LINES GP-RETURN
LINES GP-STICK

EXCAVATOR 325 LN EXCAVATOR 2SK
 325, 325L, 325LN EXCAVATORS 2SK00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2005 325 LN 2SK   (2016)

HYDRAULIC SYSTEM

LINES GP-TRAVEL MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
 

#SEBP20050380
 

087-5079: LINES GP-TRACK MOTOR

875079 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2SK139-UP
c653386 SEBP2005
0875079 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR (31.86MM ID)  
2. 4I-1610 [1] TUBE AS  
3. 4I-1609 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 MC [8] BOLT (M12X1.75X30MM)  
6. 8T-4223 C [40] WASHER-HARD (25.5 OD)  
7. 4I-1611 [1] TUBE AS  
8. 4I-1608 [1] TUBE AS  
9. 6V-8724 [2] ELBOW-90 DEGREE (9/16-18 THD)  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-8398 C [5] SEAL-O-RING (13.31MM ID)  
15. 101-7404 M [16] BOLT-HEX SOCKET (M10X1.5X30MM)  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT (M10X1.50X70MM)  
21. 8T-4121 [2] WASHER (2.5MM THK)  
22. 6V-0400 [16] FLANGE-HALF  
23. 8T-4184 MC [32] BOLT (M12X1.75X45MM)  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9844 C [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 087-5780 IC [2] HOSE AS  
30. 5I-8861 IC [1] HOSE AS  
31. 5I-8696 IC [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20050381
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 7LJ1-200
7Y4800-PAGE 262
c523994 SEBP2005
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4182 M [4] BOLT  
2. 8T-4133 M [4] NUT  
3. 8T-4121 [10] WASHER  
4. 8T-4192 M [4] BOLT  
5. 087-4644 [2] PLATE AS  
6. 5P-7468 [4] CLIP (SLOT)  
7. 5P-7469 [4] CLIP (TAB)  
8. 8T-2525 [4] GROMMET  
9. 4I-1801 [1] HOSE AS  
10. 4I-1804 [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 [16] WASHER  
13. 1P-3703 [4] SEAL-RECTANGULAR  
14. 8T-4183 M [16] BOLT  
15. 4I-1807 [1] HOSE AS  
16. 4I-1810 [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL (23.52MM) ID  
19. 9X-6032 M [16] BOLT-SOCKET HEAD  
20. 7Y-3730 [4] FLANGE-SPECIAL  
21. 4J-5267 [4] SEAL (24.99MM ID)  
22. 7Y-4800 Y [1] SWIVEL GP  
23. 1U-8846 B LIQUID GASKET (2 ML)  
24. 8T-4136 M [6] BOLT  
25. 5P-1076 [2] WASHER-HARD  
26. 8T-4648 M [2] BOLT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050382
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 7LJ1-200
c523995 SEBP2005
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR  
2. 087-5559 [1] TUBE AS  
3. 087-5558 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4192 M [8] BOLT  
6. 8T-4223 [40] WASHER  
7. 087-5560 [1] TUBE AS  
8. 087-5557 [1] TUBE AS  
9. 6V-8724 [2] ELBOW  
10. 3J-1907 [3] SEAL (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 087-4588 [2] ELBOW-90 DEGREE  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-9746 [5] SEAL-O-RING (19.79MM ID)  
15. 9X-6032 M [16] BOLT-SOCKET HEAD  
16. 096-0061 [4] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 087-5470 [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT  
21. 8T-4121 [2] WASHER  
22. 6V-0400 [19] FLANGE-HALF  
23. 8T-4183 M [32] BOLT  
24. 087-5724 [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9846 [1] TEE-SWIVEL  
27. 087-5528 [2] HOSE AS  
28. 087-5525 [2] HOSE AS  
29. 4I-0716 [2] HOSE AS  
30. 4I-0713 [2] HOSE AS  
  M   METRIC PART
 

#SEBP20050383
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 7LJ201-UP
7Y4800-PAGE 262
c653334 SEBP2005
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1076 [2] WASHER-HARD (32MM 0D)  
2. 8T-4648 M [2] BOLT (M12X1.75X70MM)  
3. 8T-4121 C [6] WASHER (21MM OD)  
4. 8T-4136 M [6] BOLT (M10X1.50X25MM)  
5. 1U-8846 B GASKET-LIQUID  
6. 7Y-4800 Y [1] SWIVEL GP  
7. 4J-5267 [4] SEAL (24.99MM ID)  
8. 7Y-3730 [4] FLANGE  
9. 4I-1801 I [1] HOSE AS  
10. 4I-1804 I [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 C [16] WASHER-HARD (25.5MM OD)  
13. 1P-3703 [4] SEAL-RECTANGULAR (31.86MM ID)  
14. 8T-4184 MC [16] BOLT (M12X1.75X45MM)  
15. 4I-1807 I [1] HOSE AS  
16. 4I-1810 I [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL-O-RING (23.5MM ID)  
19. 101-7404 M [16] BOLT-HEX SOCKET (M10X1.5X30MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050384
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 7LJ201-UP
c653335 SEBP2005
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR (31.86MM ID)  
2. 087-5559 [1] TUBE AS  
3. 087-5558 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 MC [8] BOLT (M12X1.75X30MM)  
6. 8T-4223 [40] WASHER-HARD (25.5MM OD)  
7. 087-5560 [1] TUBE AS  
8. 087-5557 [1] TUBE AS  
9. 6V-8724 [2] ELBOW-90 DEGREE (90 DEGREE-9/16-18THD)  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-8398 C [5] SEAL-O-RING (16.03MM ID)  
15. 101-7404 M [16] BOLT-HEX SOCKET (M10X1.5X30MM)  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT (M10X1.50X70MM)  
21. 8T-4121 [2] WASHER (21MM OD)  
22. 6V-0400 [16] FLANGE-HALF  
23. 8T-4184 MC [32] BOLT (M12X1.75X45MM)  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9844 C [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 5I-8853 IC [2] HOSE AS  
30. 5I-8696 IC [1] HOSE AS  
31. 5I-8861 IC [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20050385
 

7Y-4800: SWIVEL GP

7Y4800 SWIVEL GP
PART OF 875079, 875083, 875085 LINES-TRACK MOTOR
c649780 SEBP2005
7Y4800 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [6] BOLT (M10X1.50X25MM)  
2. 8T-4121 [2] WASHER  
3. 7Y-4817 [1] COVER  
4. 095-1716 [1] SEAL-O-RING (109.4MM ID)  
5. 7I-7131 [1] RETAINER  
6. 7Y-4801 [1] HOUSING  
7. 096-4615 [5] SEAL  
8. 095-1625 [3] SEAL-O-RING (89.6MM ID)  
9. 4I-6262 [1] ROTOR  
10. 8T-6759 [1] PLUG-PIPE (1/16-27 THD)  
  M   METRIC PART
 

#SEBP20050386
 

087-5073: LINES GP-SWING MOTOR

875073 LINES GP-SWING MOTOR
c582960 SEBP2005
0875073 LINES GP-SWING MOTOR Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5765 [4] FLANGE-HALF  
2. 8T-4121 [8] WASHER (21MM OD)  
3. 105-3477 M [8] BOLT-HEX SOCKET  
4. 1P-3702 [2] SEAL-RECTANGULAR (28.83MM ID)  
5. 087-5606 I [1] HOSE AS  
6. 6C-6309 I [1] HOSE AS  
7. 087-4913 [1] BLOCK  
8. 8T-6685 M [4] BOLT (M10X1.50X110MM)  
9. 6V-8637 [2] CONNECTOR-SEAL  
10. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
11. 6V-9746 [2] SEAL-O-RING (18.77MM ID)  
12. 8T-5005 M [4] BOLT  
13. 4J-5267 [2] SEAL (24.99MM ID)  
14. 087-4912 [1] BLOCK  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20050387
 

6C-6293: LINES GP-RETURN & FILTER

6C6293 LINES GP-RETURN & FILTER
PART OF 6C6289, 6C6290, 6C6291 VALVE AR-STICK LOWERING
AN ATTACHMENT
c572251 SEBP2005
6C6293 LINES GP-RETURN & FILTER Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6302 [1] HOSE AS  
2. 6C-6303 [1] TUBE AS  
3. 6C-6301 [1] BLOCK  
  1P-3704 [1] SEAL-RECTANGULAR (45MM DIA)  
4. 4H-1225 [8] WASHER  
5. 4J-0524 [2] SEAL (47.22MM ID)  
6. 5K-9090 [1] SEAL (23.52MM) ID  
7. 8T-4648 M [4] BOLT  
8. 5I-8842 [1] HOSE AS  
9. 7X-2546 M [4] BOLT  
10. 7Y-8099 [1] COVER  
11. 4J-0520 [1] SEAL  
12. 101-7404 [4] BOLT-HEX SOCKET  
13. 087-5374 [1] BLOCK  
  M   METRIC PART
 

#SEBP20050388
 

087-5075: LINES GP-RETURN & FILTER

875075 LINES GP-RETURN & FILTER
875673-PAGE 266
c654142 SEBP2005
0875075 LINES GP-RETURN & FILTER Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5755 [1] HOSE AS  
2. 087-5752 [1] HOSE AS  
3. 1P-4579 [10] FLANGE-HALF  
4. 4J-0524 [8] SEAL-O-RING (47.22MM ID)  
5. 8T-4196 M [2] BOLT (M10X1.50X35MM)  
6. 8T-4121 [16] WASHER (2.5MM THK)  
7. 8T-4192 M [2] BOLT (M12X1.75X25MM)  
8. 8T-4223 [18] WASHER-HARD (3MM THK)  
9. 087-5697 [1] SUPPORT AS  
10. 087-5673 Y [1] VALVE GP-CHECK  
11. 6V-9005 [1] ELBOW-45 DEGREE  
12. 5K-9090 [2] SEAL-O-RING (23.52MM ID)  
13. 7M-8485 [2] SEAL-O-RING (29.74MM ID)  
14. 4I-6162 I [1] HOSE AS  
15. 8T-4195 M [4] BOLT (M10X1.50X30MM)  
16. 087-5478 [1] FLANGE  
17. 087-5482 [1] BLOCK  
18. 101-7403 M [4] BOLT-SOCKET HEAD (M10X1.5X80MM)  
19. 8T-4178 M [8] BOLT (M10X1.50X90MM)  
20. 4J-0527 [3] SEAL-O-RING (56.74MM ID)  
21. 094-1981 [1] VALVE AS  
22. 4I-3663 [1] FLANGE  
23. 5P-5581 [2] FLANGE-HALF  
24. 4I-3662 [1] FLANGE  
25. 8T-6356 [1] TEE-O-RING PORT  
26. 5I-8842 [1] HOSE AS  
27. 105-3479 M [4] BOLT-HEX SOCKET (M10X1.5X90MM)  
28. 115-3957 [1] PIPE AS  
29. 4I-1599 [1] SUPPORT  
30. 7Y-5238 M [3] U-BOLT  
31. 096-4883 M [6] LOCKNUT (M10X1.50 THD)  
32. 4J-0523 [2] SEAL-O-RING (44.04MM ID)  
33. 101-7400 M [4] BOLT-HEX SOCKET  
34. 087-5690 [1] TUBE AS  
35. 6V-9673 M [2] SCREW-MACHINE (M5X0.8 THD)  
36. 6V-9746 [2] SEAL-O-RING (19.79MM ID)  
37. 4I-6165 I [1] HOSE AS  
38. 8T-0078 [1] CONNECTOR  
39. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
40. 8T-4956 M [16] BOLT (M12X1.75X35MM)  
41. 8C-3446 [1] VALVE-FLUID SAMPLING  
42. 8C-3451 [1] CAP-DUST  
43. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050389
 

7Y-6017: LINES GP-STICK

7Y6017 LINES GP-STICK (REACH & MASS EXCAVATION)
2 SPEED-FOR USE WITH MEDIUM STICKS-LONG BOOM
AN ATTACHMENT
c525715 SEBP2005
7Y6017 LINES GP-STICK Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
2. 6V-8647 [1] CONNECTOR-SEAL  
3. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
4. 7Y-6079 [1] ADAPTER  
5. 9S-4182 [1] PLUG  
6. 7Y-6081 [1] HOSE AS  
 

Information:

Service Magazine
New Pressure Switch Improves Reliability Of Automatic Engine Speed Control (AEC) Function{1915,5057}
1995/05/01

Caterpillar Parts SIS Catalog 325 LN :

LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
VALVE GP-SOLENOID
7Y-4440 VALVE GP-SOLENOID
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
SWIVEL GP
7Y-4800 SWIVEL GP
LINES GP-SWING MOTOR
087-5073 LINES GP-SWING MOTOR
LINES GP-RETURN & FILTER
6C-6293 LINES GP-RETURN & FILTER
LINES GP-RETURN & FILTER
087-5075 LINES GP-RETURN & FILTER

Truck sale:

1992 CAT 325LN
USD $56,098 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1992 CAT 325LN
USD $53,180 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1994 CAT 325 LN
USD $29,000 
1994 CAT 325 LN

NASSER HEAVY EQUIP SALES
LAWERENCEVILLE, Georgia
 
USD $40,628 
1993 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
 
$42,807 USD 
CATERPILLAR 325LN 1995
- TRACK EXCAVATORS
TEKNOXGROUP S.A.
Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.