6Y0853 LINK AS-TRACK S/N 2JK1-UP PART OF 6Y2129, 6Y2127, 8E6049, 8E8815, 8E8813 TRACKS 325 L EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	6Y-0852	[192]	WASHER
2.	6Y-0849	[47]	BUSHING-TRACK
3.	6Y-0851	[47]	PIN-TRACK
4.	6Y-1608	[48]	LINK-TRACK-LH
5.	6Y-0850	[1]	PIN-TRACK
6.	6Y-0848	[1]	BUSHING-MASTER
7.	6Y-0847	[2]	SPACER
8.	6Y-1607	[48]	LINK-TRACK-RH

#SEBP20080221

9W-2201: SEAL GP

SEAL GP

9W2201 SEAL GP
PART OF 6Y1057 ROLLER-TRACK

SEBP20080221 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name

8E-1881	[1]	SEAL GP

		--OR--

096-4254	[1]	SEAL GP
096-4255	[2]	RING-TORIC

#SEBP20080222

6Y-0854: LINK AS-TRACK

LINK AS-TRACK

6Y0854 LINK AS-TRACK
S/N 7TG1-UP
PART OF 6Y2128, 6Y2131, 8E6047 TRACKS

c526699 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-0852	[192]	WASHER
2.	6Y-0849	[47]	BUSHING-TRACK
3.	6Y-0851	[47]	PIN-TRACK
4.	6Y-1608	[48]	LINK-TRACK-LH
5.	6Y-0850	[1]	PIN-TRACK
6.	6Y-0848	[1]	BUSHING-MASTER
7.	6Y-0847	[2]	SPACER
8.	6Y-1607	[48]	LINK-TRACK-RH

#SEBP20080223

7Y-2700: COUNTERWEIGHT GP

COUNTERWEIGHT GP

7Y2700 COUNTERWEIGHT GP
7Y2272-PAGE 137

c522808 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-2272 Y	[1]	COUNTERWEIGHT GP
2.	087-3533	[2]	CAP
3.	7Y-2271	[4]	SPACER
4.	7X-2585 M	[4]	BOLT
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP20080224

7Y-2272: COUNTERWEIGHT GP

COUNTERWEIGHT GP

7Y2272 COUNTERWEIGHT GP
PART OF 7Y2700 COUNTERWEIGHT

c540341 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7I-0409	[1]	LINER
2.	087-3532	[1]	LINER
3.	4I-2541	[1]	LINER
4.	7Y-2273	[1]	COUNTERWEIGHT AS
5.	7Y-2291	[1]	LINER
6.	8T-4223	[6]	WASHER (25.5MM)OD
7.	7Y-2292	[6]	WASHER (50.0MM)OD
8.	8T-4179 M	[6]	BOLT (M12X1.75X20MM)
9.	4I-8349	[2]	LINER
10.	7I-0408	[1]	LINER
11.	4I-2528	[1]	LINER
	M		METRIC PART

#SEBP20080225

4I-2812: HOOD GP

HOOD GP

4I2812 HOOD GP-PERFORATED
AN ATTACHMENT

c565366 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-1890 BD		SEAL
2.	5P-5934 BD		SEAL
3.	4I-2176	[1]	HOOD AS-ENGINE
4.	7Y-2857	[1]	LINER
5.	7Y-2858	[1]	LINER
6.	087-3874	[1]	LINER
7.	8T-6693 M	[4]	SCREW-MACHINE
8.	8T-0328	[4]	WASHER-HARD
9.	096-4129	[2]	CUSHION
10.	4I-2285	[1]	LINER
11.	6P-2216	[9]	CAP-PUSH ON
12.	4I-7924	[9]	WASHER
13.	6I-5920	[1]	DOOR GP
14.	095-0815	[4]	LOCKWASHER-SPRING
	5C-7261 M	[4]	NUT
	8T-4224	[4]	WASHER-HARD
15.	6I-6643	[2]	CUSHION
16.	7I-1703	[1]	LOCK AS
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP20080226

7Y-2701: GUARD GP-BOTTOM

GUARD GP-BOTTOM

7Y2701 GUARD GP-BOTTOM

c522814 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8086	[1]	SHEET AS
2.	7Y-8991	[1]	PLATE
3.	7Y-2727	[1]	PLATE
4.	7Y-2681	[1]	PLATE
5.	7Y-8990	[4]	SPACER
6.	7Y-2853	[33]	SPACER
7.	8T-4956 M	[45]	BOLT
8.	5P-1076	[51]	WASHER-HARD
9.	8T-4139 M	[6]	BOLT
10.	7Y-2854	[29]	SPACER
11.	7Y-2733	[1]	PLATE
12.	7Y-2683	[1]	PLATE
13.	7Y-2732	[1]	PLATE
14.	7Y-6188	[1]	PLATE AS
15.	8T-4244 M	[6]	NUT
16.	6P-6641	[1]	GROMMET
17.	7Y-2728	[1]	PLATE AS
	M		METRIC PART

#SEBP20080227

7Y-2637: HOOD & GUARD GP

HOOD & GUARD GP

7Y2637 HOOD & GUARD GP-PART 1 OF 2
4I2616-PAGE 143.02

c539462 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-2290	[1]	COVER AS
	4I-2297	[1]	LINER
	4I-2298	[1]	LINER
	5P-8309 BD		SEAL
	8T-3597 M	[2]	NUT-WELD
2.	4I-2611	[1]	SUPPORT AS
	8T-3597 M	[3]	NUT-WELD
3.	4I-2602	[1]	SHEET AS
4.	7Y-2689	[1]	SHEET
5.	7Y-2685	[1]	SHEET AS
	8T-3597 M	[3]	NUT-WELD
6.	4I-0097	[1]	LINER
7.	4I-0096	[1]	LINER
8.	4I-0095	[1]	LINER
9.	7Y-2678	[2]	PLATE
10.	4I-8366	[1]	SUPPORT AS
	6V-9632 M	[1]	NUT
	8T-3597 M	[2]	NUT-WELD
	8T-3612 M	[2]	NUT-WELD
11.	7Y-2860	[1]	BAFFLE
12.	096-2625	[2]	PIN-COTTER
13.	7Y-2916	[2]	PIN-CLEVIS
14.	8T-4223	[4]	WASHER
15.	7Y-2600	[1]	SHEET
16.	8T-4192 M	[36]	BOLT
17.	5P-1076	[54]	WASHER-HARD
18.	7Y-2771	[1]	SUPPORT AS
19.	8T-3597 M	[1]	NUT-WELD
20.	8T-4139 M	[20]	BOLT
21.	7Y-2675	[2]	PLATE
22.	085-8960	[1]	LOCK AS
23.	095-0746 M	[4]	SCREW-MACHINE
24.	7X-2552 M	[4]	BOLT
25.	9X-8257	[4]	WASHER
26.	7Y-2885	[1]	SUPPORT
27.	7Y-2744	[1]	SUPPORT AS
	4I-2502	[1]	LINER
	8T-3597 M	[15]	NUT-WELD
	8T-3612 M	[1]	NUT-WELD
28.	7Y-2753	[1]	SUPPORT AS
	8T-3597 M	[13]	NUT-WELD
29.	7Y-2739	[1]	SUPPORT AS
	8T-3612 M	[1]	NUT-WELD
30.	4I-0093	[1]	COVER AS
	4I-2295	[1]	LINER
31.	5P-8309 BD		SEAL
32.	7Y-2680	[1]	LINER
33.	4I-2299	[1]	COVER AS
	4I-2500	[1]	LINER
34.	4I-0091	[1]	COVER AS
35.	7Y-2784	[1]	SUPPORT AS
36.	7Y-9070	[1]	SUPPORT AS
37.	8T-4956 M	[2]	BOLT
38.	4I-2616 Y	[1]	DOOR GP-SIDE
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP20080228

7Y-2637: HOOD & GUARD GP

HOOD & GUARD GP

7Y2637 HOOD & GUARD GP-PART 2 OF 2
4I2615-PAGE 143.01, 7Y2862-PAGE 143.03

c539464 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1076	[74]	WASHER-HARD
2.	8T-4192 M	[44]	BOLT
3.	7Y-2617	[1]	COVER AS
4.	8T-4224	[20]	WASHER-HARD
5.	8T-4200 M	[8]	BOLT
6.	4I-0118	[2]	HOOK
7.	4I-0117	[1]	FASTENER
8.	7Y-2590	[1]	COVER AS
9.	087-3530	[1]	ANGLE
10.	7Y-2773	[1]	SUPPORT AS
	8T-3597 M	[5]	NUT-WELD
11.	4I-2614	[1]	SUPPORT AS
	4I-2504	[1]	LINER
	6V-9632 M	[2]	NUT
	8T-3597 M	[7]	NUT-WELD
12.	8T-4138 M	[4]	BOLT
13.	9X-8256	[4]	WASHER
14.	4I-2598	[2]	STRIKER
15.	087-3909 B	[2]	SHIM (2.0MM THICK)
	087-3908 B	[2]	SHIM (1.0MM THICK)
16.	6V-8202 M	[12]	BOLT-HEX SOCKET
17.	085-8960	[1]	LOCK AS
18.	8T-4244 M	[16]	NUT
19.	4I-2599	[2]	SOCKET
20.	8T-4910 M	[4]	BOLT
21.	1R-9958	[1]	FASTENER
22.	8T-4179 M	[10]	BOLT
23.	4I-0042	[1]	COVER
24.	7Y-9065	[1]	COVER AS
25.	7Y-9044	[1]	COVER AS
26.	4I-2612	[1]	SUPPORT AS
	4I-2506	[1]	LINER
	6V-9632 M	[2]	NUT
	8T-3597 M	[2]	NUT-WELD
27.	4I-0043	[1]	COVER AS
28.	094-1349	[2]	SPRING
29.	099-4674	[1]	GROMMET
30.	9X-8257	[2]	WASHER
31.	095-0851	[2]	PIN-COTTER
32.	8T-4956 M	[8]	BOLT
33.	7Y-9073	[1]	SUPPORT AS
34.	7Y-3619	[3]	SUPPORT
35.	9M-3835	[2]	LATCH-RUBBER
36.	3B-4607	[2]	COTTER
37.	2M-5795	[2]	PIN-CLEVIS
38.	4I-2615 Y	[1]	DOOR GP-SIDE
39.	7Y-2862 Y	[1]	HOOD GP-ENGINE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP20080229

4I-2615: DOOR GP-HOOD

DOOR GP-HOOD

4I2615 DOOR GP-SIDE
PART OF 7Y2637 HOOD & GUARD

c562409 SEBP2008

For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-2609	[1]	DOOR AS-SIDE
2.	4I-2520	[1]	LINER
3.	4I-2624	[1]	LINER
4.	4I-2521	[1]	LINER
5.	4I-2625	[1]	LINER
6.	4I-2626	[1]	LINER
7.	4I-2627	[1]	LINER
8.	6I-6643	[2]	CUSHION
9.	4I-8439 M	[4]	SCREW-MACHINE
	5C-7261 M	[4]	NUT (M8X1.25 THD)
	8T-4224	[4]	WASHER-HARD (2MM THK)
	095-0815	[4]	LOCKWASHER-SPRING
10.	7I-1703	[1]	LOCK AS
	7I-1539	[1]	LOCK AS
	085-8960	[1]	LOCK AS
	3E-6908	[4]	STUD-WELD
	M		METRIC PART

Information:

UNDERCARRIAGE

TRACK GP

Operation and Maintenance Manual

Track Adjustment - Adjust
325, 325B and 325L Excavators

Track Adjustment - Inspect
325, 325B and 325L Excavators

Special Instruction

Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}

Service Letter-NACD

The Bevel Grooves Welds Are Missing In The Track Frames On Certain 325 And 330 Undercarriages Supplied By Caterpillar Industrial Products Inc.
The Bevel Grooves Welds Are Missing In The Track Frames On Certain 325 And 330 Undercarriages Supplied By Caterpillar Industrial Products Inc.

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Periodic Loss Of Left Hand Track Travel And Swing Function
Periodic Loss Of Left Hand Track Travel And Swing Function

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Service Letter-China

Service Letter-Asia

Undercarriage Reconditioning Bulletin

Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Service Letter-APD

Disassembly and Assembly

Track Assemblies
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS

Hydraulic Track Adjusters
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS

Service Magazine

Fill Valve For Track Adjuster Group Improved To Withstand Higher Pressures{4157}
1996/03/11

Torque Specifications For Track Shoe Bolts Are Identified{4150}
1996/05/20

Heavy Duty Track Shoes Available For High Impact Applications {4172}
1998/06/29

Correction To Disassembly And Assembly Modules SENR5408, SENR1921, SENR8963, SENR5498, And SENR8973 For Hydraulic Track Adjusters{4157}
1998/07/20

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog 325 L :

6Y-0854 LINK AS-TRACK

7Y-2700 COUNTERWEIGHT GP

7Y-2272 COUNTERWEIGHT GP

4I-2812 HOOD GP

7Y-2701 GUARD GP-BOTTOM

7Y-2637 HOOD & GUARD GP

Truck sale:

46,000

Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
NMC

36,350

Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT

22,376

Caterpillar 325L, Feller Bunchers, Forestry equipment

FINNING CANADA

75.000

Caterpillar 325 LL, Boomstamladers, Bosbouw
- Knuckleboom loaders
N C MACHINERY CO.

75.000

Caterpillar 325 LL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
N C MACHINERY CO.