AVSPARE.COM
parts catalog

6C6085 CYLINDER GP (CHG 03,04,05) PART OF 6C6099 CYLINDER-SEAL AN ATTACHMENT 320 L EXCAVATOR




HYDRAULIC SYSTEM

CYLINDER GP
 

#SEBP20340400
 

6C-6085: CYLINDER GP

6C6085 CYLINDER GP (CHG 03,04,05)
PART OF 6C6099 CYLINDER-SEAL
AN ATTACHMENT
c540296 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6086 [1] CYLINDER AS  
2. 5I-3173 [1] RING-RETAINING  
3. 5I-3172 [1] RING  
4. 5I-4016 [1] STOP  
5. 7Y-4622 M [1] LOCKNUT-SPECIAL  
6. 087-5539 J [1] RING  
7. 9X-3604 J [1] SEAL AS  
8. 096-3201 J [1] RING  
9. 6C-8556 [1] PISTON  
10. 6I-6784 J [1] RING-SEAL  
11. 087-5005 [1] STOP  
12. 095-1635 J [1] SEAL-O-RING  
13. 087-5550 J [1] RING  
14. 7Y-4631 [1] RING-RETAINING  
15. 6C-6093 [1] BEARING-SLEEVE  
16. 7Y-4630 J [1] SEAL-BUFFER  
17. 6C-6088 [1] HEAD  
18. 7Y-4629 J [1] SEAL-U-CUP  
19. 7Y-4628 J [1] RING  
20. 7Y-4626 J [1] SEAL-LIP TYPE  
21. 6C-6089 [1] ROD AS  
  087-5533 [1] BEARING-SLEEVE  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6C-6091 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
 

#SEBP20340401
 

087-5633: CYLINDER GP-BUCKET

875633 CYLINDER GP (CHG 00,01,02,03)
PART OF 7Y5199 CYLINDER & SEAL
AN ATTACHMENT
c657052 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1040 R [1] CYLINDER AS  
  7Y-5131 [1] BEARING-SLEEVE  
2. 087-5504 M [1] LOCKNUT  
3. 087-5505 J [1] RING  
4. 9X-3592 J [1] SEAL AS  
5. 093-1630 J [1] RING  
6. 127-6052 [1] PISTON  
7. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80MM)  
8. 087-5640 R [1] ROD AS  
  4I-0704 [1] BEARING-SLEEVE  
9. 126-2043 [1] HEAD  
10. 093-1824 [1] BEARING-SLEEVE  
11. 7Y-5119 [1] RING-RETAINING  
12. 087-5510 J [1] RING  
13. 095-1717 J [1] SEAL-O-RING  
14. 114-0644 J [1] SEAL-LIP  
15. 7Y-5116 J [1] RING  
16. 7Y-5117 J [1] SEAL-U-CUP  
17. 7Y-5118 J [1] SEAL-BUFFER  
18. 114-0756 [1] BEARING-SLEEVE  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  087-5394 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20340402
 

087-5422: CYLINDER GP-STICK

875422 CYLINDER GP (CHG 04,05,06)
PART OF 874956 CYLINDER & SEAL
AN ATTACHMENT
c739312 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5423 R [1] CYLINDER AS  
2. 7Y-5128 [1] BEARING-SLEEVE  
3. 103-8379 [1] RING  
4. 103-8380 [1] STOP  
5. 103-8418 M [1] LOCKNUT  
6. 118-3995 J [1] RING  
7. 9X-3598 J [1] SEAL AS  
8. 096-1800 J [1] RING  
9. 7I-7186 [1] PISTON  
10. 6I-6787 J [1] RING-SEAL  
11. 087-5431 [1] STOP  
12. 095-1632 J [1] SEAL-O-RING  
13. 087-5436 J [1] RING  
14. 093-1572 [1] RING-RETAINING  
15. 114-0757 [1] BEARING-SLEEVE  
16. 123-1983 J [1] SEAL-BUFFER  
17. 087-5434 [1] HEAD  
18. 096-2664 J [1] SEAL-U-CUP  
19. 096-2665 J [1] RING  
20. 114-0646 J [1] SEAL-LIP  
21. 103-8415 R [1] ROD AS  
22. 7Y-5128 [1] BEARING-SLEEVE  
23. 095-0929 [2] RING-RETAINING  
24. 7Y-5215 M [8] BOLT-SOCKET HEAD  
25. 103-8378 [1] RING-RETAINING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  118-4024 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20340403
 

6C-6099: CYLINDER & SEAL GP

6C6099 CYLINDER & SEAL GP
6C6085-PAGE 299
PART OF 6C6001 BOOM AR
AN ATTACHMENT
c532710 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6085 Y [1] CYLINDER GP  
2. 7X-4803 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20340404
 

7Y-5100: CYLINDER GP-BUCKET

7Y5100 CYLINDER GP-BUCKET (CHG 04,05,06,07,08,09,10)
130MM (5.11 IN) BORE X 1156MM (45.5 IN) STROKE
PART OF 875565 CYLINDER & SEAL
AN ATTACHMENT
c583294 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1620 R [1] CYLINDER AS  
2. 7Y-5131 [1] BEARING-SLEEVE  
3. 7Y-4622 M [1] LOCKNUT-SPECIAL  
4. 7Y-4636 [1] RING  
5. 9X-3595 J [1] SEAL AS  
6. 7Y-4632 J [1] RING  
7. 7I-7183 [1] PISTON  
8. 7Y-5216 M [8] BOLT-SOCKET HEAD  
9. 7Y-5108 R [1] ROD AS  
10. 7Y-5128 [1] BEARING-SLEEVE  
11. 7Y-5130 [1] HEAD  
12. 093-1824 [1] BEARING-SLEEVE  
13. 7Y-5119 [1] RING-RETAINING  
14. 7Y-4633 J [1] RING  
15. 095-1631 J [1] SEAL-O-RING  
16. 114-0644 [1] SEAL-LIP TYPE  
17. 7Y-5116 J [1] RING  
18. 7Y-5117 J [1] SEAL-U-CUP  
19. 7Y-5118 J [1] SEAL-BUFFER  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE :
  7Y-5145 [1] KIT-SEAL  
    (INCL PARTS MARKED J)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20340405
 

087-4989: LINES GP-SWING MOTOR

874989 LINES GP-SWING MOTOR
S/N 9WG1-503,4ZJ1-405,3XK1-618
c530415 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5765 [4] FLANGE-HALF  
2. 8T-4121 [16] WASHER  
3. 8T-4182 M [8] BOLT  
4. 1P-3702 [2] SEAL-RECTANGULAR (28.83MM ID)  
5. 5I-4095 [1] HOSE AS  
6. 5I-4098 [1] HOSE AS  
7. 6V-9746 [2] SEAL-O-RING (19.79MM ID)  
8. 5I-4013 [2] FLANGE-SPECIAL  
9. 8T-4196 M [8] BOLT  
  1P-3703 [2] SEAL-RECTANGULAR  
  M   METRIC PART
 

#SEBP20340406
 

087-4989: LINES GP-SWING MOTOR

874989 LINES GP-SWING MOTOR
S/N 9WG504-UP,4ZJ406-UP,3XK619-UP
c663857 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-5765 [4] FLANGE-HALF  
2. 8T-4121 C [8] WASHER (2.5MM THK)  
3. 8T-4182 M [8] BOLT (M10X1.5X45MM)  
4. 1P-3702 [4] SEAL-RECTANGULAR (28.83MM ID)  
5. 110-2805 IC [1] HOSE AS  
6. 101-7404 MC [4] BOLT-HEX SOCKET (M10X1.5X30MM)  
7. 6V-9746 [4] SEAL-O-RING (18.94MM ID)  
8. 7Y-3729 C [2] FLANGE  
9. 110-2806 C [1] HOSE GP  
  110-2804 I [1] HOSE AS  
  7Y-5074 BE GUARD  
10. 6V-9853 [2] ELBOW-SWIVEL  
11. 101-7398 M [4] BOLT-HEX SOCKET (M10X1.5X40MM)  
12. 6E-2158 [1] FLANGE  
13. 6V-0357 [1] SEAL-O-RING (29.74MM ID)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20340407
 

4I-1890: LINES GP-BOOM CYLINDER

4I1890 LINES GP-BOOM CYLINDER
PART OF 6C6001, 873696, 873704 BOOM ARS
AN ATTACHMENT
c583352 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3558 [1] TUBE AS  
2. 4I-3557 [1] TUBE AS  
3. 8T-4185 M [16] BOLT (M10X1.50X50MM)  
4. 1P-3703 [4] SEAL-RECTANGULAR  
5. 4I-3559 [1] TUBE AS  
6. 4I-3560 [1] TUBE AS  
7. 8T-4136 M [8] BOLT (M10X1.50X25MM)  
8. 4I-3565 [2] SUPPORT AS  
    (EACH INCLUDES)
  4I-1678 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-6H THD)  
9. 8T-4195 M [8] BOLT (M10X1.50X30MM)  
10. 8T-4121 [24] WASHER (21MM OD)  
11. 4I-1678 [2] SUPPORT AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-6H THD)  
  M   METRIC PART
 

#SEBP20340408
 

6C-6140: LINES GP-BOOM

6C6140 LINES GP-BOOM
PART OF 6C6001 BOOM AR
AN ATTACHMENT
c586591 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6162 [1] TUBE AS  
2. 6C-6163 [1] TUBE AS  
3. 6C-6164 [2] TUBE AS  
4. 6C-6165 [1] TUBE AS  
5. 6C-6268 [2] PLATE  
6. 6C-6369 [1] CLIP AS  
7. 4I-1676 [4] CLIP  
8. 8T-4139 M [22] BOLT  
9. 8T-4223 [40] WASHER-HARD  
10. 4I-1674 [8] CLIP  
11. 7Y-4868 [10] CLIP  
12. 7Y-3732 [6] CLIP  
13. 8T-4183 M [4] BOLT  
14. 4I-5868 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD  
15. 6C-6275 [1] SUPPORT AS  
  4I-5868 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD  
16. 8T-4192 M [2] BOLT  
17. 8T-4121 [16] WASHER  
18. 8T-4195 M [8] BOLT  
19. 5P-7468 [2] CLIP (SLOT)  
  5P-8444 [2] GROMMET  
20. 1P-3703 [1] SEAL-RECTANGULAR  
21. 1P-3704 [4] SEAL-RECTANGULAR (45MM DIA)  
22. 5I-8748 [8] SPACER  
23. 7K-1181 [3] STRAP-CABLE  
24. 8T-4910 M [6] BOLT  
25. 8T-4244 M [4] NUT  
26. 6C-6173 I [1] HOSE AS  
27. 6V-9746 [6] SEAL-O-RING (19.79MM ID)  
28. 5K-9090 [3] SEAL (23.52MM) ID  
29. 6C-6168 [1] TUBE AS  
30. 6C-6169 [1] TUBE AS  
31. 6C-6170 [1] TUBE AS  
32. 6C-6171 [2] TUBE AS  
33. 8T-4648 M [10] BOLT  
34. 6C-6273 I [1] HOSE AS  
35. 4I-3562 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD  
36. 4I-3567 [1] SUPPORT AS  
  4I-3562 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD  
37. 8T-4956 M [4] BOLT  
38. 6C-6172 [1] PLATE  
39. 6C-6065 [2] PLATE  
40. 6C-6064 [1] BLOCK  
41. 6C-6174 [1] BLOCK  
42. 6C-6186 J [1] VALVE GP (LOAD CONTROL)  
  6C-6190 [1] VALVE GP  
  9F-2167 [1] SCREW-BLEEDER  
43. 6C-6255 [1] ADAPTER  
44. 4I-6136 I [1] HOSE AS  
45. 6C-6464 [1] HOSE AS  
46. 7X-2550 M [4] BOLT  
47. 6V-9872 [1] CONNECTOR  
48. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
49. 6V-8724 [1] ELBOW  
50. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
51. 7Y-4531 [4] CLAMP-HALF  
52. 1S-0994 [1] CLIP  
53. 6C-6368 [1] CLIP AS  
54. 6V-8994 [1] UNION-BULKHEAD  
55. 6V-9168 [1] NUT  
56. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
57. 6C-6446 I [2] HOSE AS  
58. 6V-8636 [1] CONNECTOR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6C-6191 J [1] KIT-SEAL  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20340409
 

4I-0776: LINES GP-BOOM

4I0776 LINES GP-BOOM
PART OF 873704 BOOM AR-SHORT
AN ATTACHMENT
c611914 SEBP2034
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-5621 [1] TUBE AS  
2. 6V-9746 [9] SEAL-O-RING (18.94MM ID)  
3. 4I-5620 [1] TUBE AS  
4. 4I-5652 [1] TUBE AS  
5. 4I-5651 [1] TUBE AS  
6. 7I-8017 I [1] HOSE AS  
7. 5I-4026 [2] TUBE AS  
8. 5K-9090 [3] SEAL-0-RING (23.5MM ID)  
9. 122-7255 I [1] HOSE AS  
10. 7Y-4868 [14] CLIP  
11. 8T-4223 [34] WASHER-HARD (3MM THK)  
12. 8T-4139 M [26] BOLT (M12X1.75X30MM)  
13. 4I-1676 [6] CLIP  
14. 4I-1674 [6] CLIP  
15. 4I-3556 [1] ELBOW  
16. 4I-5701 [1] TUBE AS  
17. 8T-4648 M [8] BOLT (M12X1.75X70MM)  
18. 1P-3704 [2] SEAL-RECTANGULAR (45MM DIA)  
19. 4I-3567 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-6H THD)  
20. 8T-4121 [12] WASHER (21MM OD)  
21. 8T-4195 M [4] BOLT (M10X1.50X30MM)  
22. 4I-3562 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-6H THD)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

Information:

Special Instruction
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Repairing and Strengthening Stick Assemblies' Support Brackets and Reinforcing a Center Boss Assembly{6502}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
320, 320L, 320N AND 320S EXCAVATOR HYDRAULIC SYSTEM
Stick Cylinder
320, 320L, 320N AND 320S EXCAVATOR HYDRAULIC SYSTEM
Bucket Cylinder
320, 320L, 320N AND 320S EXCAVATOR HYDRAULIC SYSTEM
Hydraulic Cylinders
320, 320L AND 320N EXCAVATOR ATTACHMENTS
Boom Cylinder Lines Group
320, 320L AND 320N EXCAVATOR ATTACHMENTS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog 320 L :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.