AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9C4970 LINES GP-STEERING OIL 9T5530-PAGE 267 IT18F INTEGRATED TOOLCARRIER


STEERING SYSTEM
LINES GP
PUMP GP-METERING
VALVE GP
PUMP GP
BRAKING SYSTEM
PUMP GP

INTEGRATED TOOLCARRIER IT18F INTEGRATED TOOLCARRIER 5EJ
 IT18F INTEGRATED TOOL CARRIER 5EJ00001-UP (MACHINE) POWERED BY 3114 ENGINE SEBP2126 IT18F 5EJ   (1992)

STEERING SYSTEM

LINES GP
LINES GP-STEERING
9C-4970 LINES GP-STEERING
LINES GP-STEERING
9C-4774 LINES GP-STEERING
9C-4774 LINES GP-STEERING
LINES GP-STEERING
9C-4774 LINES GP-STEERING
9C-4774 LINES GP-STEERING
 

#SEBP21260360
 

9C-4970: LINES GP-STEERING

9C4970 LINES GP-STEERING OIL
9T5530-PAGE 267
c565704 SEBP2126
9C4970 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5777 [1] ADAPTER-O-RING  
  7M-8485 [1] SEAL-O-RING (29.74MM) ID  
2. 9T-5530 Y [1] PUMP GP-METERING  
3. 8T-1686 [1] ELBOW  
4. 3K-0360 [9] SEAL-O-RING (16.36MM ID)  
5. 9C-9719 I [1] HOSE AS  
6. 6V-8398 [10] SEAL-0-RING (13.31MM ID)  
7. 9R-4688 I [1] HOSE AS  
8. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
9. 8T-6466 M [4] BOLT (M10X1.50X60MM)  
10. 8T-4121 [11] WASHER (21MM OD)  
11. 4E-0435 [1] STRIP AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-6H THD)  
12. 4E-0086 I [1] HOSE AS  
  6V-9746 [1] SEAL-O-RING (19.79MM ID)  
13. 3J-1907 [1] SEAL-O-RING  
14. 8T-1718 [1] ELBOW-90 DEGREE  
15. 6V-8639 [2] CONNECTOR-SEAL  
16. 8T-4136 M [7] BOLT (M10X1.50X25MM)  
17. 3S-8665 [1] CLIP (TAB)  
18. 9M-8406 [1] CLIP (15.8MM ID)  
19. 6V-1249 [2] GROMMET  
20. 9T-8844 [1] VALVE-CHECK  
21. 6V-8628 [1] ELBOW  
22. 5P-7464 [2] CLIP  
23. 6V-8625 [2] ELBOW-FACE SEAL (90 DEGREE-3/4-16THD)  
24. 3G-8057 [1] CLIP (SLOT)  
25. 3G-8047 [1] GROMMET  
26. 3G-8054 [1] CLIP (TAB)  
27. 5P-7465 [2] CLIP  
28. 9X-2041 M [4] SCREW-TRUSS HEAD  
29. 4E-7100 I [2] HOSE AS  
30. 6V-3965 [1] NIPPLE AS  
  6V-0852 [1] CAP-DUST  
31. 9C-9721 I [2] HOSE AS  
32. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
33. 6V-8647 [1] CONNECTOR-SEAL  
34. 1P-4577 [2] FLANGE-HALF  
35. 7D-4027 [1] ADAPTER  
  4J-0520 [2] SEAL  
36. 6V-8775 [2] TEE-FACE SEAL  
37. 7J-9108 [1] SEAL-O-RING (15.60MM ID)  
38. 6V-9002 [1] ELBOW (45 DEG-3/4-16THD)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21260361
 

9C-4774: LINES GP-STEERING

9C4774 LINES GP-STEERING-PART 1 OF 2
TYPE 1
9T5530-PAGE 267
PART OF 9C4771 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c555335 SEBP2126
9C4774 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8782 [1] TEE-FACE SEAL  
2. 3K-0360 [11] SEAL-O-RING (16.36MM ID)  
3. 5P-5777 [1] ADAPTER-O-RING  
4. 7M-8485 [1] SEAL-O-RING (29.74MM) ID  
5. 9C-9719 I [1] HOSE AS  
6. 6V-8398 [11] SEAL-0-RING (13.31MM ID)  
7. 8R-9828 [1] TUBE AS  
8. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
9. 4J-5477 [5] SEAL-O-RING (8.61MM ID)  
10. 9R-4686 I [1] HOSE AS  
11. 6V-8639 [3] CONNECTOR-SEAL  
12. 5P-9617 [1] ADAPTER  
13. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
14. 9S-4185 [2] PLUG-O-RING (3/4 X 16 THD)  
15. 8T-4956 M [4] BOLT (M12X1.75X35MM)  
16. 5P-8245 [4] WASHER (3MM THK)  
17. 6V-8638 [1] CONNECTOR-SEAL  
18. 2M-9780 [3] SEAL-O-RING (19.18MM ID)  
19. 3G-8054 [1] CLIP (TAB)  
  3G-8057 [1] CLIP (SLOT)  
  3G-8047 [1] GROMMET  
20. 8M-2773 [1] CLIP (17.5MM ID)  
21. 6D-4244 [1] CLIP  
22. 8T-4136 M [5] BOLT (M10X1.50X25MM)  
23. 8T-4121 [17] WASHER (21MM OD)  
24. 9T-5461 [1] VALVE GP-UNLOADING  
25. 1P-3703 [2] SEAL-RECTANGULAR  
26. 6V-8640 [1] CONNECTOR-SEAL  
27. 6V-8721 [1] ELBOW-FACE SEAL  
28. 9X-2041 [1] SCREW-TRUSS HEAD  
29. 8T-4133 M [1] NUT (M10X1.50 THD)  
30. 8R-9827 [1] TUBE AS  
  6V-9746 [1] SEAL-O-RING (19.79MM ID)  
31. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
32. 8T-6466 M [4] BOLT (M10X1.50X60MM)  
33. 9C-9744 I [1] HOSE AS  
34. 0L-2072 [1] CLIP  
35. 8T-4191 M [1] BOLT (M10X1.50X16MM)  
36. 6D-7573 [1] CLIP  
37. 7D-7233 [1] CLIP (SLOT)  
38. 4E-0435 [1] STRIP AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-6H THD)  
  9R-2821 [1] BOSS  
39. 8T-4172 M [4] BOLT (M10X1.50X80MM)  
40. 9S-4191 [1] PLUG-O-RING  
41. 9X-6772 [3] STRAP-CABLE  
42. 4P-7581 [2] CLIP  
43. 9C-9745 I [1] HOSE AS  
44. 4J-0522 [2] SEAL (37.69MM ID)  
45. 6V-8647 [1] CONNECTOR-SEAL  
46. 4E-7100 I [2] HOSE AS  
47. 6V-0397 [2] FLANGE-HALF  
48. 6V-8625 [2] ELBOW-FACE SEAL (90 DEGREE-3/4-16THD)  
49. 9C-9721 I [2] HOSE AS  
50. 9T-5530 Y [1] PUMP GP-METERING  
51. 6V-9849 [1] ELBOW-SWIVEL  
52. 3E-9995 [1] FILM-FACE  
53. 8Y-7770 [1] HARNESS AS  
54. 6V-8773 [1] TEE-FACE SEAL  
55. 3E-6450 [1] SWITCH AS-PRESSURE  
  3E-3370 [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  8T-8729 [3] PIN-CONNECTOR  
56. 6V-8775 [2] TEE-FACE SEAL  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21260362
 

9C-4774: LINES GP-STEERING

9C4774 LINES GP-STEERING-PART 2 OF 2
TYPE 1
PART OF 9C4771 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c555336 SEBP2126
9C4774 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8844 [1] VALVE-CHECK  
2. 6V-8398 [3] SEAL-0-RING (13.31MM ID)  
3. 6V-8628 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING (8.92MM ID)  
4. 6V-3965 [1] NIPPLE AS  
5. 8R-3086 [1] ELBOW  
  1P-3704 [1] SEAL-RECTANGULAR (45MM DIA)  
6. 6V-0852 [1] CAP-DUST  
7. 7X-0871 [1] TEE  
8. 4E-2718 I [1] HOSE AS  
9. 6V-8555 [1] NUT-FACE SEAL  
10. 6V-8939 [1] REDUCER-SPECIAL  
  7J-9108 [1] SEAL-O-RING (15.60MM ID)  
11. 8T-4139 M [4] BOLT (M12X1.75X30MM)  
  7X-0599 [4] WASHER-HARD (20MM)OD  
12. 5P-7465 [2] CLIP  
13. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
14. 9S-4191 [1] PLUG-O-RING  
15. 3K-0360 [3] SEAL-O-RING (16.36MM ID)  
16. 6V-8625 [2] ELBOW-FACE SEAL  
17. 8T-4136 M [2] BOLT (M10X1.50X25MM)  
18. 8T-4121 [2] WASHER  
19. 6V-1249 [2] GROMMET  
20. 5P-7464 [2] CLIP  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21260363
 

9C-4774: LINES GP-STEERING

9C4774 LINES GP-STEERING-PART 1 OF 2
TYPE 2
9T5530-PAGE 267, 1036317-PAGE 267.02
PART OF 9C4771 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c579776 SEBP2126
9C4774 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8782 [1] TEE-FACE SEAL  
2. 3K-0360 [11] SEAL-O-RING (16.36MM ID)  
3. 5P-5777 [1] ADAPTER-O-RING  
4. 7M-8485 C [2] SEAL-O-RING (29.74MM) ID  
5. 9C-9719 I [1] HOSE AS  
6. 6V-8398 [11] SEAL-O-RING (16.03MM ID)  
7. 8R-9828 [1] TUBE AS  
8. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
9. 4J-5477 [5] SEAL-O-RING (8.61MM ID)  
10. 9R-4686 I [1] HOSE AS  
11. 6V-8639 [3] CONNECTOR-SEAL  
12. 5P-9617 [1] ADAPTER  
13. 3J-1907 [2] SEAL-O-RING (15.85MM OD)  
14. 9S-4185 [2] PLUG-O-RING (3/4 X 16 THD)  
15. 8T-4956 M [4] BOLT (M12X1.75X35MM)  
16. 5P-8245 [4] WASHER (3MM THK)  
17. 6V-8638 [1] CONNECTOR-SEAL  
18. 2M-9780 C [2] SEAL-O-RING (19.18MM ID)  
19. 3G-8054 [1] CLIP (TAB)  
  3G-8057 [1] CLIP (SLOT)  
  3G-8047 [1] GROMMET  
20. 8M-2773 [1] CLIP (17.5MM ID)  
21. 6D-4244 [1] CLIP (22.22 MM ID)  
22. 8T-4136 M [5] BOLT (M10X1.50X25MM)  
23. 8T-4121 [17] WASHER (21MM OD)  
24. 103-6317 CY [1] VALVE GP-UNLOADING  
25. 1P-3703 [2] SEAL-RECTANGULAR  
26. 6V-8637 C [1] CONNECTOR-SEAL  
27. 6V-8721 [1] ELBOW-FACE SEAL  
28. 9X-2041 [1] SCREW-TRUSS HEAD  
29. 8T-4133 M [1] NUT (M10X1.50 THD)  
30. 8R-9827 [1] TUBE AS  
  6V-9746 [1] SEAL-O-RING (22.5MM OD)  
31. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
32. 8T-6466 M [4] BOLT (M10X1.50X60MM)  
33. 9C-9744 I [1] HOSE AS  
34. 0L-2072 [1] CLIP  
35. 8T-4191 M [1] BOLT (M10X1.50X16MM)  
36. 6D-7573 [1] CLIP (64.82MM)LG  
37. 7D-7233 [1] CLIP (SLOT)  
38. 4E-0435 [1] STRIP AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-6H THD)  
  9R-2821 [1] BOSS  
39. 8T-4178 CM [4] BOLT (M10X1.50X90MM)  
40. 9S-4191 [1] PLUG-O-RING (9/16-18THD)  
41. 9X-6772 [3] STRAP-CABLE  
42. 4P-7581 [2] CLIP  
43. 9C-9745 I [1] HOSE AS  
44. 4J-0522 [2] SEAL (37.69MM ID)  
45. 6V-8647 [1] CONNECTOR-SEAL  
46. 4E-6976 C [2] HOSE AS  
47. 1P-4578 C [2] FLANGE  
48. 6V-8625 [2] ELBOW-FACE SEAL (90 DEGREE-3/4-16THD)  
49. 9C-9721 I [2] HOSE AS  
50. 9T-5530 Y [1] PUMP GP-METERING  
51. 6V-9849 [1] ELBOW-SWIVEL  
52. 3E-9995 [1] FILM-FACE  
53. 8Y-7770 [1] HARNESS AS  
54. 6V-8773 [1] TEE-FACE SEAL  
55. 3E-6450 [1] SWITCH AS-PRESSURE  
  3E-3370 [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  8T-8729 [3] PIN-CONNECTOR  
56. 6V-8775 [2] TEE-FACE SEAL  
57. 3D-2824 C [1] SEAL-O-RING (23.47MM ID)  
58. 9S-9334 C [1] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21260364
 

9C-4774: LINES GP-STEERING

9C4774 LINES GP-STEERING-PART 2 OF 2
TYPE 2
PART OF 9C4771 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c555336 SEBP2126
9C4774 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8844 [1] VALVE-CHECK  
2. 6V-8398 [3] SEAL-0-RING (13.31MM ID)  
3. 6V-8628 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING (8.92MM ID)  
4. 6V-3965 [1] NIPPLE AS  
5. 8R-3086 [1] ELBOW  
  1P-3704 [1] SEAL-RECTANGULAR (45MM DIA)  
6. 6V-0852 [1] CAP-DUST  
7. 7X-0871 [1] TEE  
8. 4E-2718 I [1] HOSE AS  
9. 6V-8555 [1] NUT-FACE SEAL  
10. 6V-8939 [1] REDUCER-SPECIAL  
  7J-9108 [1] SEAL-O-RING (15.60MM ID)  
11. 8T-4139 M [4] BOLT (M12X1.75X30MM)  
  7X-0599 [4] WASHER-HARD (20MM)OD  
12. 5P-7465 [2] CLIP  
13. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
14. 9S-4191 [1] PLUG-O-RING  
15. 3K-0360 [3] SEAL-O-RING (16.36MM ID)  
16. 6V-8625 [2] ELBOW-FACE SEAL  
17. 8T-4136 M [2] BOLT (M10X1.50X25MM)  
18. 8T-4121 [2] WASHER  
19. 6V-1249 [2] GROMMET  
20. 5P-7464 [2] CLIP  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21260365
 

9T-5530: PUMP GP-METERING

9T5530 PUMP GP-METERING
TYPE 1
PART OF 9C4774 LINES-STEERING, 9C4970 LINES-STEERING OIL
c530646 SEBP2126
9T5530 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9010 [1] BUSHING  
2. 8F-5340 [1] SEAL-LIP TYPE  
3. 7J-8009 [1] PIN  
4. 3G-6906 [1] SCREW  
5. 1H-1023 [1] SEAL-O-RING  
6. 3G-6907 [1] SEAT  
7. 5F-9144 [1] SEAL-O-RING  
8. 6S-7827 [1] BALL  
9. 6S-7826 [1] RETAINER-BALL  
10. 9J-5686 [3] SEAL-O-RING  
11. 6V-8099 [7] BOLT-12 POINT HEAD  
12. 6E-1630 [1] SPACER  
13. 3G-6889 [1] CAP  
14. 6E-1631 [1] GEROTOR AS  
15. 3G-6905 [1] SPACER  
16. 7J-6839 [1] DRIVE-CONTROL END  
17. 3G-6891 [2] RACE  
18. 5L-1100 [1] BEARING-THRUST  
19. 7F-8267 [1] SEAL-O-RING  
20. 9J-5442 [1] RING  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  9T-8560 [1] KIT-SPRING  
  9T-8847 [1] KIT-SEAL  
 

#SEBP21260366
 

9T-5530: PUMP GP-METERING

9T5530 PUMP GP-METERING
TYPE 2
PART OF 9C4774 LINES-STEERING, 9C4970 LINES-STEERING OIL
c563010 SEBP2126
9T5530 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9010 [1] BUSHING  
2. 8F-5340 [1] SEAL-LIP TYPE  
3. 7J-8009 [1] PIN  
4. 3G-6906 [1] SCREW  
5. 1H-1023 [1] SEAL-O-RING  
6. 3G-6907 [1] SEAT  
7. 5F-9144 [1] SEAL-O-RING  
8. 6S-7827 [1] BALL  
9. 6S-7826 [1] RETAINER-BALL  
10. 9J-5686 [3] SEAL-O-RING  
11. 3E-8049 C [7] BOLT-12 POINT HEAD  
12. 6E-6150 C [1] SPACER  
13. 3G-6889 [1] CAP  
14. 6E-6149 C [1] GEROTOR AS  
15. 3G-6905 [1] SPACER  
16. 7J-6839 [1] DRIVE-CONTROL END  
17. 3G-6891 [2] RACE  
18. 5L-1100 [1] BEARING-THRUST  
19. 7F-8267 [1] SEAL-O-RING  
20. 9J-5442 [1] RING  
21. 7R-4530 C [1] O-RING  
22. 9T-7122 C [1] SEAL  
23. 9T-7123 C [1] RING  
24. 101-1702 C [1] CONTROL AS  
  7J-8009 C [1] PIN  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  9T-8560 [1] KIT-SPRING  
  9T-8847 [1] KIT-SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP21260367
 

103-6317: VALVE GP-UNLOADING

1036317 VALVE GP-UNLOADING
PART OF 9C4774 LINES-STEERING
AN ATTACHMENT
c581599 SEBP2126
1036317 VALVE GP-UNLOADING Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [1] PLUG-O-RING  
2. 3J-1907 [1] SEAL-O-RING (11.89MM ID)  
3. 9S-8005 [3] PLUG-O-RING (3/4-16 THD)  
4. 3K-0360 [3] SEAL-O-RING (16.36MM ID)  
5. 9S-8003 [1] PLUG-O-RING  
6. 1J-9671 [1] SEAL-O-RING (10.52MM ID)  
7. 104-7844 [1] VALVE GP-CHECK  
8. 9T-6630 [1] VALVE GP-CHECK  
  2M-9780 [1] SEAL-O-RING (19.18MM ID)  
  4M-6582 [1] SEAL-O-RING  
  5P-2199 [1] RING-BACKUP  
9. 104-7845 [1] VALVE GP-DIVERTER  
10. 104-7846 [1] VALVE GP-RELIEF  
11. 4J-0520 [1] SEAL (32.92MM ID)  
 

#SEBP21260368
 

8R-9589: PUMP & MOUNTING GP

8R9589 PUMP & MOUNTING GP
9T9803-PAGE 269
PART OF 9C4771 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c531700 SEBP2126
8R9589 PUMP & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [4] BOLT (M12X1.75X30MM)  
  8T-4223 [4] WASHER  
2. 8T-6750 [1] SEAL  
3. 9T-9803 Y [1] PUMP GP-GEAR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21260369
 

9T-9803: PUMP GP-GEAR

9T9803 PUMP GP-GEAR
PART OF 8R9589 PUMP & MOUNTING
AN ATTACHMENT
c531701 SEBP2126
9T9803 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4806 [1] SEAL-LIP TYPE  
  1L-3768 [1] RING-RETAINING  
2. 9S-4191 [1] PLUG-O-RING  
  3J-1907 [1] SEAL  
3. 5P-8289 [2] BOLT-12 POINT HEAD  
4. 1F-7958 [2] NUT-FULL  
  5P-1393 [2] STUD-TAPERLOCK  
   
    THE FOLLOW KIT
    IS AVAILABLE:
  6E-0128 [1] KIT-SEAL  
 

Information:

Caterpillar Parts SIS Catalog IT18F :

9C-4771 STEERING AR-SECONDARY
STEERING COLUMN GP
8Y-7680 STEERING COLUMN GP
CONTROL GP-STEERING
9C-8235 CONTROL GP-STEERING
CYLINDER & MOUNTING GP-COUPLER
9C-9460 CYLINDER & MOUNTING GP-COUPLER
CYLINDER GP-PIN COUPLER
9T-8823 CYLINDER GP-PIN COUPLER
CYLINDER GP-TILT
9T-7026 CYLINDER GP-TILT
CYLINDER & SEAL GP
8R-0442 CYLINDER & SEAL GP
CYLINDER GP-LIFT
100-7020 CYLINDER GP-LIFT
LINES GP-STEERING
9C-4774 LINES GP-STEERING
9C-4774 LINES GP-STEERING
LINES GP-STEERING
9C-4774 LINES GP-STEERING
9C-4774 LINES GP-STEERING
PUMP GP-METERING
9T-5530 PUMP GP-METERING
PUMP GP-METERING
9T-5530 PUMP GP-METERING
VALVE GP-UNLOADING
103-6317 VALVE GP-UNLOADING
PUMP & MOUNTING GP
8R-9589 PUMP & MOUNTING GP

Truck sale:

Caterpillar IT18F, Construction
35,100 
Caterpillar IT18F, Construction
- Wheel Loaders
ZIEGLER CAT
CATERPILLAR IT18F 1994
 
CATERPILLAR IT18F 1994
- MINING WHEEL LOADER
ZIEGLER INC
United States
CAT IT18F
Call 
CAT IT18F

Pro Team Auction
Arkansas
1994 CAT IT18F
USD $29,500 
1994 CAT IT18F

Randall Brothers
Ohio
 
 
CAT IT18F

McGrew Equipment Company
Seven Valleys, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.