AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I6749 LINES GP-PILOT 7Y5005-PAGE 221.02 PART OF 7Y6010 INSTALLATION AR AN ATTACHMENT 325 L EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-PILOT
VALVE GP-SOLENOID
LINES GP-TRAVEL MOTOR
LINES GP-STICK

EXCAVATOR 325 L EXCAVATOR 2SL
 325, 325 L AND 325 LN EXCAVATORS 2SL00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2195 325 L 2SL   (2016)

HYDRAULIC SYSTEM

LINES GP-PILOT
LINES GP-PILOT
087-4813 LINES GP-PILOT
LINES GP-PILOT
087-4813 LINES GP-PILOT
LINES GP-PILOT
6I-6749 LINES GP-PILOT
LINES GP-PILOT
6I-6802 LINES GP-PILOT
 

#SEBP21950380
 

6I-6749: LINES GP-PILOT

6I6749 LINES GP-PILOT
7Y5005-PAGE 221.02
PART OF 7Y6010 INSTALLATION AR
AN ATTACHMENT
c526898 SEBP2195
6I6749 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5005 Y [1] VALVE GP-SOLENOID  
2. 8T-6869 M [2] BOLT  
3. 8T-4224 [2] WASHER-HARD  
4. 087-4529 [1] HOSE AS  
5. 6V-9836 [1] TEE  
6. 6V-8397 [7] SEAL-O-RING (9.25MM ID)  
7. 6V-8724 [4] ELBOW  
8. 3J-1907 [4] SEAL (11.89MM ID)  
9. 6K-0806 [3] STRAP-CABLE  
10. 5I-8497 [1] HOSE AS  
11. 5I-3014 [1] HOSE AS  
12. 6V-9508 [1] PLUG-FACE SEAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21950381
 

6I-6802: LINES GP-PILOT

6I6802 LINES GP-PILOT
PART OF 6I6914 VALVE AR
AN ATTACHMENT
c584723 SEBP2195
6I6802 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-0806 [5] STRAP-CABLE  
2. 4I-1754 I [1] HOSE AS  
3. 4I-0806 I [1] HOSE AS  
4. 6V-8781 [3] TEE-FACE SEAL  
5. 3J-1907 [11] SEAL-O-RING (15.85MM OD)  
6. 6V-8397 [16] SEAL-O-RING (12.83MM OD)  
7. 4I-1766 I [1] HOSE AS  
8. 8T-4136 M [5] BOLT (M10X1.50X25MM)  
9. 6V-8636 [3] CONNECTOR  
10. 6V-9836 [1] TEE  
11. 087-5775 I [1] HOSE AS  
12. 7Y-4190 I [1] HOSE AS  
13. 4I-1631 I [1] HOSE AS  
14. 4I-1031 I [1] HOSE AS  
15. 4I-0818 I [1] HOSE AS  
16. 6V-8724 [5] ELBOW (90 DEGREE-9/16-18THD)  
17. 6I-6828 [1] SUPPORT AS  
18. 8T-4139 M [2] BOLT (M12X1.75X30MM)  
19. 8T-4223 [2] WASHER-HARD  
20. 087-5140 [1] PLATE  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21950382
 

7Y-5005: VALVE GP-SOLENOID

7Y5005 VALVE GP-SOLENOID
PART OF 6I6749 LINES-PILOT
AN ATTACHMENT
c617703 SEBP2195
7Y5005 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8456 [1] COIL GP  
2. 7Y-8469 [1] VALVE GP  
3. 095-1582 [1] SEAL-O-RING (13.8MM ID)  
4. 7Y-8459 [1] PLUG  
5. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
6. 7Y-8460 [1] SPRING  
 

#SEBP21950383
 

087-5079: LINES GP-TRACK MOTOR

875079 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 3LL1-UP
7Y4800-PAGE 281
c539603 SEBP2195
0875079 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4182 M [4] BOLT  
2. 8T-4133 M [4] NUT  
3. 8T-4121 C [14] WASHER  
4. 8T-4192 M [4] BOLT  
5. 087-4644 [2] PLATE AS  
6. 5P-7468 [4] CLIP (SLOT)  
7. 5P-7469 [4] CLIP (TAB)  
8. 8T-2525 [4] GROMMET  
9. 4I-1801 I [1] HOSE AS  
10. 4I-1804 I [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 C [20] WASHER  
13. 1P-3703 [4] SEAL-RECTANGULAR  
14. 8T-4184 CM [16] BOLT  
15. 4I-1807 I [1] HOSE AS  
16. 4I-1810 I [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL (23.52MM) ID  
19. 9X-6032 M [16] BOLT-SOCKET HEAD  
20. 7Y-3730 [4] FLANGE-SPECIAL  
21. 4J-5267 [4] SEAL (24.99MM ID)  
22. 7Y-4800 Y [1] SWIVEL GP  
23. 1U-8846 BC LIQUID GASKET  
24. 8T-4136 M [6] BOLT  
25. 8T-4648 M [2] BOLT  
26. 5P-1076 C [2] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21950384
 

087-5079: LINES GP-TRACK MOTOR

875079 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 3LL1-UP
c585402 SEBP2195
0875079 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR  
2. 4I-1610 [1] TUBE AS  
3. 4I-1609 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 MC [8] BOLT  
6. 8T-4223 C [40] WASHER-HARD  
7. 4I-1611 [1] TUBE AS  
8. 4I-1608 [1] TUBE AS  
9. 6V-8724 [2] ELBOW  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-8398 C [5] SEAL-O-RING (13.31MM ID)  
15. 9X-6032 M [16] BOLT-SOCKET HEAD  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT  
21. 8T-4121 [2] WASHER  
22. 6V-0400 [16] FLANGE-HALF  
23. 8T-4184 CM [32] BOLT  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9844 CI [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 5I-8850 C [2] HOSE AS  
30. 5I-8861 C [1] HOSE AS  
31. 5I-8696 C [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21950385
 

087-5083: LINES GP-TRACK MOTOR

875083 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 9ZK1-UP
7Y4800-PAGE 281
c582920 SEBP2195
0875083 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4182 M [4] BOLT (M10X1.50X45MM)  
2. 8T-4133 M [4] NUT (M10X1.50 THD)  
3. 8T-4121 C [14] WASHER (21MM OD)  
4. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
5. 087-4644 [2] PLATE AS  
6. 5P-7468 [4] CLIP (SLOT)  
7. 5P-7469 [4] CLIP (TAB)  
8. 8T-2525 [4] GROMMET  
9. 4I-1801 I [1] HOSE AS  
10. 4I-1804 I [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 C [20] WASHER-HARD (25.5MM OD)  
13. 1P-3703 [4] SEAL-RECTANGULAR  
14. 8T-4184 MC [16] BOLT (M12X1.75X45MM)  
15. 4I-1807 I [1] HOSE AS  
16. 4I-1810 I [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL (23.52MM) ID  
19. 101-7404 M [16] BOLT-HEX SOCKET  
20. 7Y-3730 [4] FLANGE-SPECIAL  
21. 4J-5267 [4] SEAL (24.99MM ID)  
22. 7Y-4800 Y [1] SWIVEL GP  
23. 1U-8846 B LIQUID GASKET  
24. 8T-4136 M [6] BOLT (M10X1.50X25MM)  
25. 8T-4648 M [2] BOLT (M12X1.75X70MM)  
26. 5P-1076 [2] WASHER-HARD (4MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21950386
 

087-5083: LINES GP-TRACK MOTOR

875083 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 9ZK1-UP
c582910 SEBP2195
0875083 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR  
2. 087-5561 [1] TUBE AS  
3. 087-5563 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 CM [8] BOLT (M12X1.75X30MM)  
6. 8T-4223 [40] WASHER-HARD (25.5MM OD)  
7. 087-5562 [1] TUBE AS  
8. 087-5564 [1] TUBE AS  
9. 6V-8724 [2] ELBOW (90 DEGREE-9/16-18THD)  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-8398 C [5] SEAL-O-RING (13.31MM ID)  
15. 101-7404 M [16] BOLT-HEX SOCKET  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT (M10X1.50X70MM)  
21. 8T-4121 [2] WASHER (21MM OD)  
22. 6V-0400 [16] FLANGE-HALF  
23. 8T-4184 MC [32] BOLT (M12X1.75X45MM)  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9844 C [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 5I-8850 CI [2] HOSE AS  
30. 5I-8693 CI [1] HOSE AS  
31. 5I-8864 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21950387
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 2SL1-UP
7Y4800-PAGE 281
c582918 SEBP2195
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4182 M [4] BOLT (M10X1.50X45MM)  
2. 8T-4133 M [4] NUT (M10X1.50 THD)  
3. 8T-4121 C [14] WASHER (21MM OD)  
4. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
5. 087-4644 [2] PLATE AS  
6. 5P-7468 [4] CLIP (SLOT)  
7. 5P-7469 [4] CLIP (TAB)  
8. 8T-2525 [4] GROMMET  
9. 4I-1801 I [1] HOSE AS  
10. 4I-1804 I [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 C [20] WASHER-HARD (25.5MM OD)  
13. 1P-3703 [4] SEAL-RECTANGULAR  
14. 8T-4184 MC [16] BOLT (M12X1.75X45MM)  
15. 4I-1807 I [1] HOSE AS  
16. 4I-1810 I [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL (23.52MM) ID  
19. 101-7404 M [16] BOLT-HEX SOCKET  
20. 7Y-3730 [4] FLANGE-SPECIAL  
21. 4J-5267 [4] SEAL (24.99MM ID)  
22. 7Y-4800 Y [1] SWIVEL GP  
23. 1U-8846 B LIQUID GASKET  
24. 8T-4136 M [6] BOLT (M10X1.50X25MM)  
25. 8T-4648 M [2] BOLT (M12X1.75X70MM)  
26. 5P-1076 [2] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP21950388
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 2SL1-UP
c582919 SEBP2195
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR  
2. 087-5559 [1] TUBE AS  
3. 087-5558 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 CM [8] BOLT (M12X1.75X30MM)  
6. 8T-4223 [40] WASHER-HARD (25.5MM OD)  
7. 087-5560 [1] TUBE AS  
8. 087-5557 [1] TUBE AS  
9. 6V-8724 [2] ELBOW (90 DEGREE-9/16-18THD)  
10. 3J-1907 [3] SEAL-O-RING (11.89MM ID)  
11. 6V-8397 [4] SEAL-O-RING (9.25MM ID)  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
14. 6V-8398 C [5] SEAL-O-RING (16.03MM ID)  
15. 101-7404 M [16] BOLT-HEX SOCKET  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT (M10X1.50X70MM)  
21. 8T-4121 [2] WASHER (21MM OD)  
22. 6V-0400 [19] FLANGE-HALF  
23. 8T-4184 CM [32] BOLT (M12X1.75X45MM)  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
26. 6V-9844 C [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 5I-8853 CI [2] HOSE AS  
30. 5I-8696 CI [1] HOSE AS  
31. 5I-8861 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP21950389
 

7Y-6386: LINES GP-STICK

7Y6386 LINES GP-STICK
S/N 2SL1-UP
PART OF 5I7099, 7Y6394 FRONT ARS
AN ATTACHMENT
c583365 SEBP2195
7Y6386 LINES GP-STICK Parts scheme
  For full view, you need register

Parts for your 325 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-4447 I [2] HOSE AS  
2. 7Y-6447 [1] TUBE AS  
3. 7Y-6448 [1] TUBE AS  
4. 6V-9746 [10] SEAL-O-RING (19.79MM ID)  
5. 7Y-6449 [2] TUBE AS  
6. 7Y-6513 [1] TUBE AS  
  8J-2413 [1] SEAL-O-RING  
7. 8T-0338 M [4] BOLT-SOCKET HEAD  
8. 7Y-7904 I [2] HOSE AS  
9. 7Y-4531 [22] CLAMP-HALF  
10. 8T-4192 M [22] BOLT  
  8T-4223 [22] WASHER-HARD  
11. 8T-4195 M [8] BOLT  
12. 8T-4121 [12] WASHER  
13. 7Y-6510 [1] SUPPORT AS  
  7Y-6511 [1] SUPPORT AS  
    (EA SUPPORT AS INCLUDES)
  8T-4133 M [2] NUT  
14. 7Y-6511 [1] SUPPORT AS  
15. 7Y-6442 [1] TUBE AS  
  4J-5267 [1] SEAL (24.99MM ID)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

Information:

Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
Improvements To Pilot Lines Adds Strength And Prevents Interference{5057}
1993/11/29
Pilot Lines For Implement Lever Operation Can Be Adapted With Quick Couplers {6100,5057}
1994/01/24
Hydraulic Fluid Sampling Valve Is Relocated To The Pilot Lines Group {5057}
1998/02/16
Solenoid Valve Assembly Is Improved In Pilot Lines Group {5479,5057}
1999/03/29

Caterpillar Parts SIS Catalog 325 L :

LINES GP-PILOT
087-4813 LINES GP-PILOT
LINES GP-PILOT
087-4813 LINES GP-PILOT
LINES GP-PILOT
6I-6744 LINES GP-PILOT
LINES GP-PILOT
6I-6744 LINES GP-PILOT
LINES GP-PILOT
6I-6744 LINES GP-PILOT
LINES GP-PILOT
6I-6744 LINES GP-PILOT
LINES GP-PILOT
7Y-8003 LINES GP-PILOT
LINES GP-PILOT
4I-0992 LINES GP-PILOT
LINES GP-PILOT
6I-6802 LINES GP-PILOT
VALVE GP-SOLENOID
7Y-5005 VALVE GP-SOLENOID
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5079 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR

Truck sale:

Caterpillar 325L, Crawler Excavators, Construction
46,000 
Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
NMC
Caterpillar 325L, Crawler Excavators, Construction
36,350 
Caterpillar 325L, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT
Caterpillar 325L, Feller Bunchers, Forestry equipment
22,376 
Caterpillar 325L, Feller Bunchers, Forestry equipment

FINNING CANADA
Caterpillar 325 LL, Boomstamladers, Bosbouw
75.000 
Caterpillar 325 LL, Boomstamladers, Bosbouw
- Knuckleboom loaders
N C MACHINERY CO.
Caterpillar 325 LL, Raupenbagger, Bau-Und Bergbauausrüstung
75.000 
Caterpillar 325 LL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.