HYDRAULIC SYSTEM
COOLER GPCOUPLING GP
CYLINDER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP
ACCUMULATOR GP
LINES GP-HYDRAULIC
HYDRAULIC SYSTEM
COOLER GP
#SEBP22190330
4P-9604: COOLER GP-HYDRAULIC OIL
4P-9604 COOLER GP-HYDRAULIC OIL
S/N 7HK1-UP
PART OF 103-5811, 105-7194 COOLING AR-HIGH AMBIENT TEMP
S/N 7HK1-UP
PART OF 103-5811, 105-7194 COOLING AR-HIGH AMBIENT TEMP
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-7952 | [1] | CORE AS-OIL COOLER (IMPLEMENT, BRAKE) | |
| 2. | 148-8978 C | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 3. | 4P-6183 | [1] | CHANNEL AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 8T-4139 CM | [8] | BOLT (M12X1.75X30-MM) | |
| 5. | 8T-4223 C | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 7. | 8T-4172 CM | [8] | BOLT (M10X1.5X80-MM) | |
| 8. | 8T-4121 | [26] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 3H-8726 | [4] | MOUNT AS | |
| 10. | 1M-6298 | [8] | CLAMP-MOUNTING | |
| 11. | 4P-9593 | [1] | PLATE | |
| 12. | 6P-6641 C | [2] | GROMMET | |
| 13. | 8T-4195 M | [10] | BOLT (M10X1.5X30-MM) | |
| 14. | 4P-6178 | [2] | BAFFLE AS-BOTTOM | |
| (EACH INCLUDES) | ||||
| 7X-0507 | [5] | WASHER-HARD (12X22.5X5-MM THK) | ||
| 15. | 4P-6194 | [2] | STRIP | |
| 16. | 102-0233 | [4] | ADAPTER | |
| 17. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 7X-0590 | [4] | WASHER-HARD (13.5X44.5X6-MM THK) | ||
| 18. | 7X-7729 C | [40] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4136 M | [48] | BOLT (M10X1.5X25-MM) | |
| 20. | 1P-5412 | [8] | BUSHING-TERMINAL | |
| 21. | 1P-5411 | [4] | SLEEVE | |
| 22. | 4P-9591 C | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 23. | 4P-9592 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 24. | 4P-6184 | [1] | ANGLE AS | |
| 8T-3490 M | [18] | NUT-WELD (M10X1.5-THD) | ||
| 25. | 108-0363 C | [1] | PLATE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP22190331
7E-0606: COOLER GP-HYDRAULIC OIL
7E-0606 COOLER GP-HYDRAULIC OIL
S/N 7HK1-99999
PART OF 7E-0604 INSTALLATION AR-ENGINE
S/N 7HK1-99999
PART OF 7E-0604 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-8977 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 2. | 148-8978 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 3. | 4P-6183 | [1] | CHANNEL AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 8T-4139 CM | [8] | BOLT (M12X1.75X30-MM) | |
| 5. | 8T-4223 C | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 7. | 8T-4172 CM | [8] | BOLT (M10X1.5X80-MM) | |
| 8. | 8T-4121 | [26] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 3H-8726 C | [4] | MOUNT AS | |
| 10. | 1M-6298 | [8] | CLAMP-MOUNTING | |
| 11. | 4P-9593 | [1] | PLATE | |
| 12. | 6P-6641 C | [2] | GROMMET | |
| 13. | 8T-4195 M | [10] | BOLT (M10X1.5X30-MM) | |
| 14. | 4P-6178 | [2] | BAFFLE AS-BOTTOM | |
| (EACH INCLUDES) | ||||
| 7X-0507 | [5] | WASHER-HARD (12X22.5X5-MM THK) | ||
| 15. | 4P-6194 | [2] | STRIP | |
| 16. | 102-0233 | [4] | ADAPTER | |
| 17. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 7X-0590 | [4] | WASHER-HARD (13.5X44.5X6-MM THK) | ||
| 18. | 7X-7729 C | [40] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4136 M | [48] | BOLT (M10X1.5X25-MM) | |
| 20. | 1P-5412 | [8] | BUSHING-TERMINAL | |
| 21. | 1P-5411 | [4] | SLEEVE | |
| 22. | 4P-9591 C | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 23. | 4P-9592 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 24. | 4P-6184 | [1] | ANGLE AS | |
| 8T-3490 M | [18] | NUT-WELD (M10X1.5-THD) | ||
| 25. | 108-0363 C | [1] | PLATE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP22190332
111-7331: COUPLING GP-PUMP
For full view, you need register
#SEBP22190333
9T-9569: CYLINDER GP-LIFT
9T-9569 CYLINDER GP-LIFT
S/N 7HK1-UP
235-MM (9.25-IN) BORE X 1270-MM (50-IN) STROKE
PART OF 8R-5622 HYDRAULIC AR
S/N 7HK1-UP
235-MM (9.25-IN) BORE X 1270-MM (50-IN) STROKE
PART OF 8R-5622 HYDRAULIC AR
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-1361 | [1] | CYLINDER AS | |
| 1A. | 6E-1166 | [1] | BEARING | |
| 2. | 3S-7023 | [8] | WASHER (34X57X6-MM THK) | |
| 3. | 6E-1367 | [1] | PISTON | |
| 4. | 1J-5281 J | [1] | RING-WEAR | |
| 5. | 192-1435 J | [1] | SEAL AS | |
| 6. | 1U-3174 J | [1] | SEAL-O-RING | |
| 7. | 158-3032 | [1] | RING-BACKUP | |
| 8. | 303-2003 | [1] | HEAD | |
| 9. | 6E-1369 | [1] | ROD AS | |
| 9A. | 6E-1364 | [1] | BUSHING | |
| 10. | 167-2228 J | [1] | SEAL AS-BUFFER | |
| 11. | 167-2346 J | [1] | SEAL-U-CUP | |
| 12. | 225-3294 J | [1] | SEAL-WIPER | |
| 13. | 8T-0370 M | [2] | BOLT (M30X3.5X140-MM) | |
| 14. | 8C-3411 M | [6] | BOLT (M30X3.5X90-MM) | |
| 15. | 8T-0666 M | [6] | BOLT (M24X3X90-MM) | |
| 16. | 9X-3613 J | [1] | RING-WEAR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 229-7174 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (KIT ALSO INCLUDES BACK-UP RING) | ||||
| J | KIT MARKED J SERVICE(S) PARTS MARKED J | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22190334
9T-9570: CYLINDER GP-TILT
9T-9570 CYLINDER GP-TILT
S/N 7HK1-99999
292 MM (11.5 IN) BORE X 820 MM (32 IN) STROKE
PART OF 8R-5622 HYDRAULIC AR
S/N 7HK1-99999
292 MM (11.5 IN) BORE X 820 MM (32 IN) STROKE
PART OF 8R-5622 HYDRAULIC AR
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-1163 | [1] | CYLINDER AS | |
| 2. | 6E-1166 | [1] | BEARING | |
| 3. | 8T-1797 | [1] | SEAL AS | |
| 4. | 6E-1169 | [1] | PISTON | |
| 5. | 5P-2236 | [1] | SEAL-O-RING | |
| 6. | 1U-1626 | [1] | RING-BACKUP | |
| 7. | 6E-1170 | [1] | HEAD | |
| 8. | 6E-1171 | [1] | ROD AS | |
| 9. | 6E-1166 | [1] | BEARING | |
| 10. | 3S-6162 | [8] | WASHER-HARD (40.5X67X6-MM THK) | |
| 11. | 101-0767 M | [2] | BOLT (M36X4X150-MM) | |
| 12. | 9X-3574 | [1] | SEAL | |
| 13. | 9J-5467 | [1] | SEAL-U-CUP | |
| 14. | 9X-3575 | [1] | SEAL | |
| 15. | 8T-7851 | [1] | RING-WEAR | |
| 16. | 9X-6018 | [1] | LOCKNUT (4-12-THD) | |
| 17. | 6V-5215 M | [4] | BOLT (M8X1.25X16-MM) | |
| 7S-6369 | [4] | WASHER (0.344X0.75X0.188-IN THK) | ||
| 18. | 9J-2991 | [2] | RING-WEAR | |
| 19. | 9X-6152 M | [6] | BOLT (M36X4X130-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 229-7176 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22190335
8R-5622: HYDRAULIC AR
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8R-5663 Y | [1] | CYLINDER & MTG GP-STEERING | ||
| 9T-9569 Y | [2] | CYLINDER GP-LIFT | ||
| 9T-9570 Y | [1] | CYLINDER GP-TILT | ||
| 8R-5665 Y | [1] | LINES GP-HYDRAULIC (IMPLEMENT) | ||
| 4E-9659 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 8R-5670 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 8R-5666 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 8R-5667 Y | [1] | LINES GP-PILOT | ||
| 8R-5668 Y | [1] | LINES GP-STEERING | ||
| 8R-5672 Y | [1] | LINES GP-TILT CYLINDER | ||
| 8R-5675 Y | [1] | PUMP & MTG GP-IMPLEMENT | ||
| 8R-5676 Y | [1] | PUMP & MTG GP-PILOT & BRAKE | ||
| 8R-5678 Y | [1] | PUMP & MTG GP-STEERING & FAN | ||
| 8R-5674 Y | [1] | TANK & MTG GP-HYDRAULIC (HYDRAULIC FAN, STEERING) | ||
| 8R-5673 Y | [1] | TANK & MTG GP-HYDRAULIC (IMPLEMENT, BRAKE) | ||
| 8R-5669 Y | [1] | VALVE & LINES GP-HYD CONTROL | ||
| 8R-5680 Y | [1] | VALVE & LINES GP-STEERING NEUT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22190336
8R-5640: KICKOUT & POSITIONER GP
8R-5640 KICKOUT & POSITIONER GP -BUCKET
S/N 7HK1-99999
PART OF 8R-5621 CHASSIS AR
Type 1
S/N 7HK1-99999
PART OF 8R-5621 CHASSIS AR
Type 1
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4K-8302 | [2] | CLIP (LOOP) | |
| 2. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 5P-9297 | [2] | CLIP (LOOP) | |
| 5. | 101-8690 | [2] | MAGNET AS | |
| 6. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 7. | 8M-2770 | [1] | CLIP (LOOP) | |
| 8. | 101-8695 | [1] | STRIP AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 9. | 8T-4197 M | [4] | BOLT (M8X1.25X40-MM) | |
| 10. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 11. | 7X-2549 M | [1] | BOLT (M12X1.75X100-MM) | |
| 12. | 8T-4223 | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 054-6197 | [1] | TUBE | |
| 14. | 8T-4244 M | [5] | NUT (M12X1.75-THD) | |
| 15. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 16. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 17. | 101-8689 | [1] | BRACKET AS | |
| 18. | 101-8692 | [1] | BRACKET AS | |
| 19. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 20. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 21. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 22. | 9U-1465 | [1] | HARNESS AS | |
| 23. | 7X-2550 M | [4] | BOLT (M12X1.75X110-MM) | |
| 24. | 101-8688 | [2] | CLAMP | |
| 25. | 053-2171 | [1] | GROMMET | |
| 26. | 101-8687 | [1] | TUBE AS | |
| 27. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 28. | 4E-5213 | [1] | COVER AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 29. | 6V-8210 M | [2] | BOLT (M8X1.25X16-MM) | |
| 30. | 090-8865 | [2] | SPACER (17X40X3-MM THK) | |
| 31. | 3E-7843 Y | [1] | CONTROL GP-POSITION | |
| 32. | 101-8691 | [1] | PLATE | |
| 33. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 34. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 35. | 6V-1875 | [2] | GROMMET | |
| 6V-1572 | [2] | CLIP (SLOT) | ||
| 6V-1573 | [2] | CLIP (TAB) | ||
| 36. | 7X-2557 M | [2] | BOLT (M16X2X140-MM) | |
| 37. | 101-8693 | [1] | PLATE | |
| 38. | 101-8694 | [2] | BLOCK | |
| 39. | 6D-4636 | [3] | CLIP (LOOP) | |
| 40. | 053-6410 | [1] | RETAINER | |
| 41. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 42. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 43. | 3S-2093 | [2] | STRAP-CABLE | |
| 44. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 45. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22190337
8R-5640: KICKOUT & POSITIONER GP
8R-5640 KICKOUT & POSITIONER GP -BUCKET
S/N 7HK1-99999
PART OF 8R-5621 CHASSIS AR
Type 2
S/N 7HK1-99999
PART OF 8R-5621 CHASSIS AR
Type 2
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4K-8302 | [1] | CLIP (LOOP) | |
| 2. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 5P-9297 | [2] | CLIP (LOOP) | |
| 5. | 101-8690 | [2] | MAGNET AS | |
| 6. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 7. | 8M-2770 | [1] | CLIP (LOOP) | |
| 8. | 101-8695 | [1] | STRIP AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 9. | 8T-4197 M | [4] | BOLT (M8X1.25X40-MM) | |
| 10. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 11. | 7X-2549 M | [1] | BOLT (M12X1.75X100-MM) | |
| 12. | 8T-4223 | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 054-6197 | [1] | TUBE | |
| 14. | 8T-4244 M | [5] | NUT (M12X1.75-THD) | |
| 15. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 16. | 9X-8257 | [3] | WASHER (17.5X30X3.5-MM THK) | |
| 17. | 101-8689 | [1] | BRACKET AS | |
| 18. | 101-8692 | [1] | BRACKET AS | |
| 19. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 20. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 21. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 22. | 128-2304 Y | [1] | WIRING GP-KICKOUT & POSITIONER | |
| 23. | 7X-2550 M | [4] | BOLT (M12X1.75X110-MM) | |
| 24. | 101-8688 | [2] | CLAMP | |
| 25. | 053-2171 | [1] | GROMMET | |
| 26. | 101-8687 | [1] | TUBE AS | |
| 27. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 28. | 4E-5213 | [1] | COVER AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 29. | 6V-8210 M | [2] | BOLT (M8X1.25X16-MM) | |
| 30. | 090-8865 | [2] | SPACER (17X40X3-MM THK) | |
| 31. | 3E-7843 Y | [1] | CONTROL GP-POSITION | |
| 32. | 101-8691 | [1] | PLATE | |
| 33. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 34. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 35. | 6V-1875 | [2] | GROMMET | |
| 6V-1572 | [2] | CLIP (SLOT) | ||
| 6V-1573 | [2] | CLIP (TAB) | ||
| 36. | 7X-2557 M | [2] | BOLT (M16X2X140-MM) | |
| 37. | 101-8693 | [1] | PLATE | |
| 38. | 101-8694 | [2] | BLOCK | |
| 39. | 6D-4636 | [2] | CLIP (LOOP) | |
| 40. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 42. | 3S-2093 | [2] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22190338
4E-8812: LINES GP-ACCUMULATOR
4E-8812 LINES GP-ACCUMULATOR
S/N 7HK1-UP
PART OF 4E-9782 CONTROL AR-RIDE, 105-7194 COOLING AR-HIGH AMBIENT TEMP
S/N 7HK1-UP
PART OF 4E-9782 CONTROL AR-RIDE, 105-7194 COOLING AR-HIGH AMBIENT TEMP
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 091-4148 | [4] | SPACER (22.31X38.1X6-MM THK) | |
| 2. | 4E-8818 | [1] | MANIFOLD | |
| 3. | 8T-4176 M | [2] | BOLT (M12X1.75X90-MM) | |
| 4. | 148-8335 | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 6V-8635 | [1] | CONNECTOR | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 5. | 148-8378 | [1] | ELBOW AS | |
| 6V-8724 | [1] | ELBOW | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6. | 1P-5767 | [4] | FLANGE-HALF | |
| 7. | 4E-8813 I | [1] | HOSE AS | |
| 8. | 8T-5460 M | [4] | BOLT (M20X2.5X40-MM) | |
| 9. | 106-9788 | [1] | PLATE | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 4E-8816 | [1] | TUBE AS | |
| 12. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 14. | 6V-1875 | [1] | GROMMET | |
| 15. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 16. | 8T-0282 M | [8] | BOLT (M16X2X120-MM) | |
| 17. | 9T-9552 Y | [1] | VALVE GP-RIDE CONTROL | |
| 18. | 4E-8814 I | [1] | HOSE AS | |
| 19. | 6V-1573 | [1] | CLIP (TAB) | |
| 20. | 6V-1572 | [1] | CLIP (SLOT) | |
| 21. | 4E-8817 | [1] | TUBE AS | |
| 22. | 6V-8397 | [2] | SEAL-O-RING | |
| 23. | 4E-8815 I | [1] | HOSE AS | |
| 24. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-7673 M | [8] | BOLT (M12X1.75X50-MM) | |
| 26. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 27. | 8C-3206 | [2] | FLANGE-HALF | |
| 28. | 4J-0520 | [2] | SEAL-O-RING | |
| 29. | 6V-3822 M | [4] | BOLT (M10X1.5X35-MM) | |
| 30. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22190339
8R-5665: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 990 WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-2824 | [1] | SEAL-O-RING | |
| 2. | 4E-5329 | [2] | ELBOW | |
| 3. | 4E-7771 I | [1] | HOSE AS | |
| 4. | 4E-7772 I | [2] | HOSE AS | |
| 5. | 4E-7773 I | [1] | HOSE AS | |
| 6. | 4E-7774 I | [1] | HOSE AS | |
| 7. | 248-6219 I | [1] | HOSE AS | |
| 8. | 4E-7789 | [2] | CLAMP-HALF | |
| 9. | 4E-8284 | [1] | PLATE | |
| 10. | 4E-8287 | [1] | HOSE AS | |
| 11. | 4E-9562 I | [1] | HOSE AS | |
| 12. | 4E-9563 I | [1] | HOSE AS | |
| 13. | 4E-9564 I | [1] | HOSE AS | |
| 14. | 6V-0852 | [2] | CAP-DUST | |
| 15. | 7I-3711 | [2] | CLAMP-HALF | |
| 16. | 109-1538 | [1] | BRACKET | |
| 17. | 133-1963 | [1] | VALVE-BREAKER RELIEF | |
| 18. | 149-3951 | [1] | BRACKET | |
| 19. | 164-5602 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 2S-4078 | [1] | SEAL-O-RING | ||
| 8J-5914 | [1] | PLUG | ||
| 20. | 191-3753 I | [1] | HOSE AS | |
| 21. | 148-8364 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8625 | [1] | ELBOW | ||
| 22. | 153-6237 | [1] | ELBOW AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9004 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 23. | 164-5567 | [2] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 24. | 164-5580 | [1] | TEE AS | |
| 6V-8398 | [2] | SEAL-O-RING | ||
| 6V-9489 | [1] | TEE-BULKHEAD | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 25. | 1P-3704 | [8] | SEAL-RECTANGULAR | |
| 26. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 27. | 1P-4582 | [8] | FLANGE-HALF | |
| 28. | 1P-4585 | [8] | FLANGE-HALF | |
| 29. | 1P-5767 | [16] | FLANGE-HALF | |
| 30. | 2H-6338 | [4] | SEAL-O-RING | |
| 31. | 4J-0527 | [4] | SEAL-O-RING | |
| 32. | 5P-7466 | [1] | CLIP (SLOT) | |
| 33. | 5P-7467 | [1] | CLIP (TAB) | |
| 34. | 5P-8112 | [1] | GROMMET | |
| 35. | 6V-1572 | [2] | CLIP (SLOT) | |
| 36. | 6V-1573 | [2] | CLIP (TAB) | |
| 37. | 6V-1875 | [2] | GROMMET | |
| 38. | 6V-9169 | [1] | NUT (13/16-16-THD) | |
| 39. | 7X-2553 M | [3] | BOLT (M16X2X40-MM) | |
| 40. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 42. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4176 M | [4] | BOLT (M12X1.75X90-MM) | |
| 44. | 8T-4183 M | [16] | BOLT (M12X1.75X40-MM) | |
| 45. | 8T-4193 M | [16] | BOLT (M16X2X50-MM) | |
| 46. | 8T-4194 M | [24] | BOLT (M12X1.75X50-MM) | |
| 47. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 48. | 8T-4223 | [55] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 49. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 50. | 8T-5041 M | [8] | BOLT (M12X1.75X120-MM) | |
| 51. | 9X-8257 | [19] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
COOLER GP
Service Magazine
