AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-4042 CYLINDER & MTG GP-BUCKET -FRONT SHOVEL S/N 5ZL1-UP PART OF 106-3341, 106-8852, 108-2897, 108-2898, 111-2435, 111-2436, 127-9620, 127-9622, 131-0490, 136-6339, 137-0302, 137-1981, 142-3455 BUCKET AR-FRONT SHOVEL AN ATTACHMENT 5130


HYDRAULIC SYSTEM
CYLINDER GP

MINING EXCAVATOR 5130 MINING EXCAVATOR 5ZL
 5130 Excavator 5ZL00001-UP (MACHINE) POWERED BY 3508 Engine SEBP2225 5130 5ZL   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-BUCKET
106-4042 CYLINDER & MTG GP-BUCKET
CYLINDER GP-BOOM
106-4338 CYLINDER GP-BOOM
CYLINDER GP-BOOM
107-6228 CYLINDER GP-BOOM
CYLINDER GP-BOOM
107-6228 CYLINDER GP-BOOM
 

#SEBP22250600
 

106-4042: CYLINDER & MTG GP-BUCKET

106-4042 CYLINDER & MTG GP-BUCKET -FRONT SHOVEL
S/N 5ZL1-UP
PART OF 106-3341, 106-8852, 108-2897, 108-2898, 111-2435, 111-2436, 127-9620, 127-9622, 131-0490, 136-6339, 137-0302, 137-1981, 142-3455 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i00090982 SEBP2225
1064042 CYLINDER & MTG GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5752 Y [2] CYLINDER GP-BUCKET (BOTTOM DUMP)  
2. 213-9392 [2] PIN  
3. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
4. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
5. 107-2923 [2] PLATE  
6. 6I-7357 [2] PIN  
7. 6I-7058 [2] COVER AS  
8. 8T-4141 M [8] BOLT (M20X2.5X70-MM)  
9. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
10. 6I-7060 [2] PLATE  
11. 7X-2574 M [8] BOLT (M24X3X45-MM)  
12. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
13. 109-2132 [2] COVER AS  
14. 8T-4193 M [16] BOLT (M16X2X50-MM)  
15. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22250601
 

106-4338: CYLINDER GP-BOOM

106-4338 CYLINDER GP-BOOM
S/N 5ZL1-39
279.4MM (11IN) BORE X 1800MM (70.87IN) STROKE
PART OF 106-4989 SHOVEL AR-FRONT
AN ATTACHMENT
i00091011 SEBP2225
1064338 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-5956 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 107-9467 M [6] BOLT (M36X4X150-MM)  
  5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 120-7674 [1] PISTON  
5. 6E-0249 [2] RING-WEAR  
6. 108-0125 [1] SEAL AS  
7. 109-4038 [1] HEAD  
8. 108-5963 [1] ROD AS  
9. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
10. 103-8096 [2] RING-RETAINING  
11. 101-0767 M [2] BOLT (M36X4X150-MM)  
12. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
13. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
14. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
15. 101-3672 M [8] BOLT (M36X4X120-MM)  
16. 8C-9136 [1] SEAL-LIP TYPE  
17. 6J-1700 [1] SEAL-U-CUP  
18. 8C-9130 [1] SEAL AS  
19. 8T-6749 [1] RING-WEAR  
20. 3S-3074 [1] SEAL-O-RING  
21. 1U-1770 [1] RING-BACKUP  
22. 3J-7354 [3] SEAL-O-RING  
23. 9S-4182 [3] PLUG (7/16-20-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250602
 

107-6228: CYLINDER GP-BOOM

107-6228 CYLINDER GP-BOOM -MASS EXCAVATOR
S/N 5ZL1-UP
279.4 MM (11.0 IN) BORE X 2450.0 MM (96.45 IN) STROKE
PART OF 108-2942 BOOM AR-MASS, 124-0439 COMMON AR-MASS EXCAVATOR
Type 1
AN ATTACHMENT
i00091059 SEBP2225
1076228 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-6229 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
4. 6E-0249 [2] RING-WEAR  
5. 108-0125 [1] SEAL AS  
6. 120-7675 [1] PISTON  
7. 107-6235 [1] HEAD  
8. 101-0767 M [2] BOLT (M36X4X150-MM)  
9. 107-6236 [1] ROD AS  
  106-4550 [1] BEARING-ALIGNING (180-MM ID)  
10. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
11. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
12. 108-0132 [1] SEAL  
13. 7J-3322 [1] SEAL-U-CUP  
14. 108-0131 [1] SEAL  
15. 108-0130 [1] RING  
16. 9X-6152 M [8] BOLT (M36X4X130-MM)  
17. 108-0129 [1] RING-BACKUP  
18. 109-5702 [1] SEAL-O-RING  
19. 107-9467 M [6] BOLT (M36X4X150-MM)  
20. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250603
 

107-6228: CYLINDER GP-BOOM

107-6228 CYLINDER GP-BOOM -MASS EXCAVATOR
S/N 5ZL1-UP
279.4 MM (11.0 IN) BORE X 2450.0 MM (96.45 IN) STROKE
PART OF 124-0439 COMMON AR-MASS EXCAVATOR
Type 2
AN ATTACHMENT
i00471990 SEBP2225
1076228 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-6229 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
4. 6E-0249 [2] RING-WEAR  
5. 108-0125 [1] SEAL AS  
6. 120-7675 [1] PISTON  
7. 136-4575 C [1] HEAD  
8. 101-0767 M [2] BOLT (M36X4X150-MM)  
9. 107-6236 [1] ROD AS  
10. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
11. 103-8096 [2] RING-RETAINING  
12. 108-0132 [1] SEAL  
13. 136-7399 C [1] SEAL-U-CUP  
14. 135-1997 C [1] SEAL-BUFFER  
15. 108-0130 [1] RING  
16. 9X-6152 M [8] BOLT (M36X4X130-MM)  
17. 108-0129 [1] RING-BACKUP  
18. 109-5702 [1] SEAL-O-RING  
19. 107-9467 M [6] BOLT (M36X4X150-MM)  
20. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
21. 3E-4371 C [1] RING-RETAINING  
22. 9S-4182 C [3] PLUG (7/16-20-THD)  
  3J-7354 C [3] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250604
 

120-7610: CYLINDER GP-BOOM

120-7610 CYLINDER GP-BOOM -FRONT SHOVEL
S/N 5ZL40-UP
279.4 MM (11.0 IN) BORE X 1800.0 MM (70.86 IN) STROKE
PART OF 106-4989 SHOVEL AR-FRONT
AN ATTACHMENT
i00091189 SEBP2225
1207610 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-7608 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 120-7607 [1] PISTON  
5. 3S-3074 [1] SEAL-O-RING  
6. 1U-1770 [1] RING-BACKUP  
7. 109-4038 [1] HEAD  
8. 135-7793 [1] ROD AS  
9. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
10. 103-8096 [2] RING-RETAINING  
11. 6E-0249 [1] RING-WEAR  
12. 108-0125 [1] SEAL AS  
13. 108-0124 [1] RING  
14. 101-0767 M [2] BOLT (M36X4X150-MM)  
15. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
16. 101-3672 M [8] BOLT (M36X4X120-MM)  
17. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
18. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
19. 8C-9136 [1] SEAL-LIP TYPE  
20. 6J-1700 [1] SEAL-U-CUP  
21. 8C-9130 [1] SEAL AS  
22. 8T-6749 [1] RING-WEAR  
23. 107-9467 M [6] BOLT (M36X4X150-MM)  
24. 9S-4182 [3] PLUG (7/16-20-THD)  
25. 3J-7354 [3] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250605
 

106-4340: CYLINDER GP-BUCKET

106-4340 CYLINDER GP-BUCKET
S/N 5ZL1-39
190.5MM (7.5 IN.) BORE X 2150MM (84.65 IN.) STROKE
PART OF 106-4989 SHOVEL AR-FRONT
AN ATTACHMENT
i00091013 SEBP2225
1064340 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-4188 [1] CYLINDER AS  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 106-7627 [1] PISTON  
4. 8T-7568 [1] SEAL-O-RING  
5. 1U-1738 [1] RING-BACKUP  
6. 106-7628 [1] HEAD  
7. 104-4191 [1] ROD AS  
  6E-5814 [1] BEARING  
8. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
9. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
10. 8C-0553 [1] SEAL-HEAD  
11. 9X-7459 [1] SEAL AS  
12. 9J-5562 [1] RING-WEAR  
13. 8T-0668 M [8] BOLT (M24X3X110-MM)  
14. 6V-8237 [10] WASHER (26X44X4-MM THK)  
15. 9X-7255 [1] SEAL-LIP TYPE  
16. 4T-9901 [1] SEAL-U-CUP  
17. 9X-3614 [1] SEAL AS  
18. 4T-9319 [1] RING-WEAR  
19. 8T-0669 M [2] BOLT (M24X3X130-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250606
 

107-9625: CYLINDER GP-BUCKET

107-9625 CYLINDER GP-BUCKET
S/N 5ZL1-49
215.9MM (8.5 IN.) BORE X 1715MM (67.52 IN.)STROKE
PART OF 108-2951 STICK AR-MASS EXCAVATOR
AN ATTACHMENT
i00091068 SEBP2225
1079625 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8399 [8] WASHER (33X56X6-MM THK)  
2. 9X-6018 [1] LOCKNUT (4-12-THD)  
3. 7J-8064 [4] RING-WEAR  
4. 9T-0119 [1] SEAL AS  
5. 108-0047 [1] PISTON  
6. 107-9632 [1] HEAD  
7. 107-9633 [1] ROD AS  
  9U-9561 [1] BEARING (160-MM ID)  
8. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
9. 108-0122 [1] RING-BACKUP  
10. 9M-5894 [1] SEAL-O-RING  
11. 9X-7323 [1] SEAL-LIP TYPE  
12. 6J-1650 [1] SEAL-U-CUP  
13. 9X-7322 [1] SEAL AS  
14. 8C-9102 [1] RING-WEAR  
15. 9S-4182 [2] PLUG (7/16-20-THD)  
16. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
17. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
18. 9X-6618 M [8] BOLT (M30X3.5X130-MM)  
19. 107-9626 [1] CYLINDER AS  
20. 107-9629 [1] BUSHING  
21. 3J-7354 [3] SEAL-O-RING  
22. 3B-8487 [1] FITTING-GREASE  
23. 5P-2937 [1] ADAPTER-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250607
 

107-9625: CYLINDER GP-BUCKET

107-9625 CYLINDER GP-BUCKET
S/N 5ZL1-UP
215.9MM (8.5 IN.) BORE X 1715MM (67.52 IN.)STROKE
PART OF 124-0439 COMMON AR-MASS EXCAVATOR, 108-2951 STICK AR-MASS EXCAVATOR
Type 1
AN ATTACHMENT
i00091069 SEBP2225
1079625 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8399 [8] WASHER (33X56X6-MM THK)  
2. 9X-6018 [1] LOCKNUT (4-12-THD)  
3. 7J-8064 [4] RING-WEAR  
4. 9T-0119 [1] SEAL AS  
5. 108-0047 [1] PISTON  
6. 107-9632 [1] HEAD  
7. 135-6767 [1] ROD AS  
8. 9U-9561 [1] BEARING (160-MM ID)  
9. 3E-9401 [2] RING-RETAINING  
10. 9M-5894 [1] SEAL-O-RING  
11. 9X-7323 [1] SEAL-LIP TYPE  
12. 6J-1650 [1] SEAL-U-CUP  
13. 9X-7322 [1] SEAL AS  
14. 8C-9102 [1] RING-WEAR  
15. 9S-4182 [2] PLUG (7/16-20-THD)  
16. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
17. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
18. 9X-6618 M [8] BOLT (M30X3.5X130-MM)  
19. 107-9626 [1] CYLINDER AS  
20. 107-9629 [1] BUSHING  
21. 3J-7354 [2] SEAL-O-RING  
22. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
23. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
24. 108-0122 [1] RING-BACKUP  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250608
 

107-9625: CYLINDER GP-BUCKET

107-9625 CYLINDER GP-BUCKET
S/N 5ZL1-UP
215.9MM (8.5 IN.) BORE X 1715MM (67.52 IN.)STROKE
PART OF 124-0439 COMMON AR-MASS EXCAVATOR
Type 2
AN ATTACHMENT
i00609315 SEBP2225
1079625 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8399 [8] WASHER (33X56X6-MM THK)  
2. 9X-6018 [1] LOCKNUT (4-12-THD)  
3. 147-6584 C [2] RING-WEAR  
4. 9T-0119 [1] SEAL AS  
5. 147-6923 C [1] PISTON  
6. 136-8500 C [1] HEAD  
7. 135-6767 [1] ROD AS  
8. 9U-9561 [1] BEARING (160-MM ID)  
9. 3E-9401 [2] RING-RETAINING  
10. 9M-5894 [1] SEAL-O-RING  
11. 9X-7323 [1] SEAL-LIP TYPE  
12. 136-7396 C [1] SEAL-U-CUP  
13. 136-7358 C [1] SEAL-BUFFER  
14. 8C-9102 [1] RING-WEAR  
15. 9S-4182 [2] PLUG (7/16-20-THD)  
16. 8T-0370 CM [2] BOLT (M30X3.5X140-MM)  
17. 109-0121 C [1] RING-RETAINING  
18. 9X-6618 CM [6] BOLT (M30X3.5X130-MM)  
19. 107-9626 [1] CYLINDER AS  
20. 107-9629 [1] BUSHING  
21. 3J-7354 [2] SEAL-O-RING  
22. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
23. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
24. 108-0122 [1] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22250609
 

112-2053: CYLINDER GP-BUCKET

112-2053 CYLINDER GP-BUCKET -RH - FRONT SHOVEL
S/N 5ZL1-UP
190.5 MM (7.5 IN) BORE X 2150.0 MM (84.64 IN) STROKE
PART OF 106-4989 SHOVEL AR-FRONT
AN ATTACHMENT
i00091126 SEBP2225
1122053 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-2054 [1] CYLINDER AS  
  104-4435 [1] CAP AS  
  6E-5814 [2] BEARING  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 125-3340 [1] PISTON  
4. 8T-7568 [1] SEAL-O-RING  
5. 158-3028 [1] RING-BACKUP  
6. 112-2052 [1] HEAD  
7. 104-4191 [1] ROD AS  
  6E-5814 [2] BEARING  
8. 9S-4182 [4] PLUG (7/16-20-THD)  
9. 3J-7354 [4] SEAL-O-RING  
10. 8T-1791 [1] SEAL AS  
11. 1U-2218 [2] RING-WEAR  
12. 9X-8480 M [8] BOLT (M24X3X110-MM)  
13. 5P-6604 [10] WASHER-HARD (25.4X40X5-MM THK)  
14. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
15. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
16. 9X-8915 M [2] BOLT-SOCKET HEAD (M24X3X130-MM)  
17. 161-5789 [1] SEAL-LIP TYPE  
18. [1] SEAL-U-CUP  
19. [1] SEAL-BUFFER  
20. 4T-9319 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Dimensions for the Hydraulic Cylinders on the 5000 Series Excavators{5456, 5457, 5458}
Dimensions for the Hydraulic Cylinders on the 5000 Series Excavators{5456, 5457, 5458}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Service Letter-Australia
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Service Letter-CFEL
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Service Letter-CSARL
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Service Letter-Americas
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Technical Information Bulletin
Debris May Enter Bucket Cylinder Cavities On Front Shovels
Debris May Enter Bucket Cylinder Cavities On Front Shovels
Proper Orientation of the Rod Yoke Prevents Interference with the Stick During Extension on Some Excavators
Proper Orientation of the Rod Yoke Prevents Interference with the Stick During Extension on Some Excavators
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Track Tension Cylinder
5130 Excavator Hydraulic System
Track Tension Cylinder
5130 Excavator Hydraulic System
Boom Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Boom Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Stick Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Stick Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Bucket Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Bucket Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Bottom Dump Cylinder (Front Shovel)
5130 Excavator Hydraulic System
Boom Cylinder (Mass Excavator)
5130 Excavator Hydraulic System
Stick Cylinder (Mass Excavator)
5130 Excavator Hydraulic System
Bucket Cylinder (Mass Excavator)
5130 Excavator Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Service Letter-Asia
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Systems Operation
Track Tension Cylinder
5130 Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Reinforcing The Stick Cylinder Bracket On Certain 5130 Front Shovel Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Installing New Rods And Seals In The Track Tensioning Cylinders On Certain 5130 Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
Product Support Program For Adding Reinforcing Plates Between The Stick Cylinder Plates On Certain 5130 Front Shovel Excavators
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
The Bottom Dump Cylinder Rod May Fail In Threads Due To Improper Heat Treating On Certain 5130 Front Shovels
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
Cracks Need To Be Repaired In The Stick Cylinder Reinforcement Plate Welds On Certain 5130 And 5130B Front Shovel Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
A Guard Needs To Be Added To The Boom Cylinder Hose On Certain 5130 And 5130B Excavators
Testing and Adjusting
Hydraulic Cylinder - Inspect
5130 Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bottom Dump Cylinder
5130 EXCAVATOR MACHINE SYSTEMS
Bucket Cylinder
5130 EXCAVATOR MACHINE SYSTEMS
Stick Cylinder
5130 EXCAVATOR MACHINE SYSTEMS
Boom Cylinder
5130 EXCAVATOR MACHINE SYSTEMS
Track Tension Cylinder
5130 EXCAVATOR MACHINE SYSTEMS
Track Tension Accumulator
5130 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Stick Cylinder Is Modified To Prevent Piston Damage{5458,7562}
1995/10/30
Longer Head With Additional Seals Improves Sealing In Track Tensioner Cylinder Group{5310}
1995/12/11
New Boom Cylinder Group Used{5456}
1996/04/15
Longer Track Tensioning Accumulator Bolts Improve Mounting Stability {5077}
1996/05/13
Improved Stick And Bucket Cylinder Groups Use New Piston With Double Wear Rings{5452,5457,7562}
1996/05/20
Bucket Cylinder Replacement{5457}
1996/05/20
Pilot Chamfer Increased On Cylinder Rods Used With Bolt-On Pistons {5451,5452,5456,5457,5458,5470}
1996/06/10
Grease Fitting Added To Rod Eye Of Bucket Cylinder Group {7562,5457}
1996/10/14
Tools Used To Remove And Install Boom, Stick, Bucket And Cylinder Pins{5456,5457,5458,6108,6500,6502,6503,6512,0745}
1997/01/13
New Bolts And Washers Used To Retain Track Tensioner Cylinder Rod Seal{4197,4157}
1997/03/17
Bottom Dump Cylinder Has Stronger Cylinder Cap{5457}
1997/03/17
Improved Sealing Of Mining Shovel Stick And Bucket Cylinders{5457,5458}
1997/04/28
Torque Increased For Piston And Head Bolts In Boom Cylinder Group{5451,7562}
1997/10/27
Bolts And Washers Retain Rod Seal In Track Tensioner Cylinder Groups {4197}
1997/12/15
New Tube Assemblies Used On 5130B Front Shovel Excavator Stick {5057,6502,5458}
1998/02/09
New Butyl Cab Mount Used To Reduce Cab Vibration {7260}
1998/04/06
Improved Rod In Bottom Dump Cylinder Group For Bucket {5457}
1998/04/13
Bolt Pattern Change From Six To Four In Piston And Rod For Bucket And Stick Cylinders Improves Service Life {5457,5458}
1998/05/11
New Expander Rings and Backup Rings are Available {0617}
2001/03/05
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
A New Stick Cylinder is Available for Improved Service Life {5458}
2002/03/11
A New Pin is Available to Mount the Bottom Dump Cylinder {5457, 6108}
2002/04/01
Purge the Air from the Hydraulic System for Improved Service Life {5050, 5456, 5458, 7562}
2002/03/25
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Harder Cylinder Pistons Are Available {5456, 5457, 5458}
2004/06/14
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 5130 :

COVER GP-VALVE
114-4428 COVER GP-VALVE
COVER GP-PUMP
4I-7695 COVER GP-PUMP
COUPLING & MTG GP-PUMP
106-2384 COUPLING & MTG GP-PUMP
COOLER GP-HYDRAULIC OIL
124-2937 COOLER GP-HYDRAULIC OIL
COOLER GP-HYDRAULIC OIL
120-6381 COOLER GP-HYDRAULIC OIL
COOLER & MTG GP-HYDRAULIC OIL
107-3247 COOLER & MTG GP-HYDRAULIC OIL
COOLER & MTG GP-HYDRAULIC OIL
107-3247 COOLER & MTG GP-HYDRAULIC OIL
COOLER & MTG GP-HYDRAULIC OIL
107-3247 COOLER & MTG GP-HYDRAULIC OIL
CYLINDER GP-BOOM
106-4338 CYLINDER GP-BOOM
CYLINDER GP-BOOM
107-6228 CYLINDER GP-BOOM
CYLINDER GP-BOOM
107-6228 CYLINDER GP-BOOM
CYLINDER GP-BOOM
120-7610 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
106-4340 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
107-9625 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
107-9625 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
107-9625 CYLINDER GP-BUCKET

Truck sale:

1996 CAT 5130
USD $84,425 
1996 CAT 5130

Empire Machinery
Eloy, Arizona
1995 CAT 5130
Call 
1995 CAT 5130

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
2008 CAT 5130
Call 
2008 CAT 5130

Winwin Used Machinery
Seoul, KOREA, South Korea
CATERPILLAR 5130 1996
$148,500 USD 
CATERPILLAR 5130 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
1995 CAT 5130
USD $235,900 
1995 CAT 5130

American Empire Equipment
NORTHVILLE, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.