8Y-8185 CONDENSER & MTG GP-REFRIGERANT S/N 6YL1-UP; 7SL1-UP; 1FW1-UP PART OF 109-7160, 8Y-8183 AIR CONDITIONER AR AN ATTACHMENT D4C III

OPERATOR STATION

AIR CONDITIONER GP

0. 8Y-8185 CONDENSER
1. 101-9616 CONDENSER

CONTROL GP-HYDRAULIC

2. 116-7616 CONTROL GP
3. 117-3530 CONTROL GP
4. 8Y-0639 CONTROL GP
5. 8Y-4983 CONTROL GP
6. 8Y-4984 CONTROL GP
7. 8Y-5053 CONTROL GP
8. 8Y-7111 CONTROL GP

CONTROL GP

9. 8Y-5052 CONTROL GP
0. INFORMATION

TRACK-TYPE TRACTOR D4C III TRACK-TYPE TRACTOR 1FW
D4C & D4C LGP, Series XL SERIES III TRACTORS Power Shift 1FW00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2242 D4C III 1FW (1998)

OPERATOR STATION

AIR CONDITIONER GP

3E-1908 COMPRESSOR GP-REFRIGERANT

8Y-8185 CONDENSER & MTG GP-REFRIGERANT

101-9616 CONDENSER GP-REFRIGERANT

383-3518 KIT-AIR CONDITIONER

109-7156 LINES GP-AIR CONDITIONER

#SEBP22420330

8Y-8185: CONDENSER & MTG GP-REFRIGERANT

CONDENSER & MTG GP-REFRIGERANT

8Y-8185 CONDENSER & MTG GP-REFRIGERANT
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 109-7160, 8Y-8183 AIR CONDITIONER AR
AN ATTACHMENT

i00720650 SEBP2242

8Y8185 CONDENSER & MTG GP-REFRIGERANT Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	101-9616 Y	[1]	CONDENSER GP-REFRIGERANT
2.	135-4951 C	[1]	COVER AS
3.	3N-4809	[2]	PLUG-BUTTON
4.	8T-4139 M	[17]	BOLT (M12X1.75X30-MM)
	8T-4223	[17]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	9G-1307	[1]	GROMMET (6.35MM ID)
	5P-8441	[1]	GROMMET (9.5MM ID)
6.	102-5811	[1]	BRACKET AS
	8T-3597 M	[5]	NUT-WELD (M12X1.75-THD)
7.	4D-8948	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22420331

101-9616: CONDENSER GP-REFRIGERANT

CONDENSER GP-REFRIGERANT

101-9616 CONDENSER GP-REFRIGERANT
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 8Y-8185 CONDENSER & MTG GP-REFRIGERANT
AN ATTACHMENT

i00197935 SEBP2242

1019616 CONDENSER GP-REFRIGERANT Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-7995	[2]	FAN
2.	3S-2093	[8]	STRAP-CABLE
3.	7T-5856	[4]	CLAMP
4.	8C-3756	[1]	FILM-IDENTIFICATION (AIR CONDITIONER)
5.	8P-6363	[1]	PLUG
6.	9X-3452	[2]	GUARD AS-FAN
7.	115-1615	[2]	RELAY AS (12-VOLT)
8.	134-6059	[1]	HARNESS AS (FAN)
9.	142-3440	[2]	PLATE-ORIFICE
10.	174-1496	[2]	MOTOR GP-ELECTRIC
			(EACH INCLUDES)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	203-2070	[8]	MOUNT (7/16 X 20 THD)
12.	204-9530	[4]	TUBE
13.	204-9531	[1]	COIL-CONDENSER
14.	204-9532	[1]	CASE AS
	7T-1099	[4]	LINK
	8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[12]	NUT-WELD (M12X1.75-THD)
	9G-9151	[2]	CLIP
15.	5C-2890 M	[2]	NUT (M6X1-THD)
16.	5P-1075	[8]	WASHER-HARD (10.2X22.5X3-MM THK)
17.	5P-8441	[1]	GROMMET
18.	6D-4246	[2]	CLIP (LOOP)
19.	7X-0578	[4]	WASHER-HARD (10.2X32X2.5-MM THK)
20.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4133 M	[4]	NUT (M10X1.5-THD)
22.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
23.	8T-4192 M	[4]	BOLT (M12X1.75X25-MM)
24.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
25.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-6685 M	[4]	BOLT (M10X1.5X110-MM)
27.	9X-7373	[1]	GROMMET (23.81-MM THK)
28.	5P-5924 D		SEAL (0.2-M)
29.	5P-2753 D		SEAL (1.2-M)
30.	5P-5908 D		SEAL (1-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP22420332

116-7616: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

116-7616 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP
PART OF 116-6382 HYDRAULIC AR
AN ATTACHMENT

i00198050 SEBP2242

1167616 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7112	[1]	LEVER AS
	1B-6182	[1]	SPACER (13.11X19.05X1.18-MM THK)
2.	4L-6454	[3]	BOLT (3/8-16X1-IN)
3.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
4.	3D-8752	[3]	LOCKNUT (5/16-24-THD)
5.	4F-2294	[2]	NUT-JAM (5/16-24-THD)
6.	3D-9609	[1]	ROD END
7.	3B-4610	[1]	PIN-COTTER
8.	0L-1170	[1]	HANDLE-LEVER
9.	8K-1255	[1]	PIN
10.	4H-1641	[1]	PIN-SPRING
11.	8Y-7113	[1]	LEVER AS
	5P-1075	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
12.	8Y-0559	[1]	ROD
13.	9K-8757	[1]	ROD END
14.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
15.	4B-9883	[1]	BOLT (5/16-24X0.875-IN)
16.	4Y-9501	[1]	LINK
17.	6S-4084	[1]	FILM-INSTRUCTION

#SEBP22420333

117-3530: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

117-3530 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP
PART OF 117-3532 HYDRAULIC AR-3 VALVE
AN ATTACHMENT

i00198051 SEBP2242

1173530 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9K-1549	[1]	ROD
2.	4L-6454	[3]	BOLT (3/8-16X1-IN)
3.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
4.	3D-8752	[2]	LOCKNUT (5/16-24-THD)
5.	4F-2294	[2]	NUT-JAM (5/16-24-THD)
6.	3D-9609	[1]	ROD END
7.	3B-4609	[1]	PIN-COTTER
8.	0L-1170	[1]	HANDLE-LEVER
9.	8K-1255	[1]	PIN
10.	4H-8380	[2]	PIN-SPRING
11.	5G-1825	[1]	LEVER AS
12.	5G-0433	[1]	LEVER AS
	1B-6182	[1]	SPACER (13.11X19.05X1.18-MM THK)
13.	9K-8757	[1]	ROD END
14.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
15.	4B-9883	[1]	BOLT (5/16-24X0.875-IN)
16.	4Y-9501	[1]	LINK
17.	6S-4084	[1]	FILM-INSTRUCTION
18.	2F-8616	[1]	NUT-SELF LOCKING (3/8-24-THD)

#SEBP22420334

8Y-0639: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

8Y-0639 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
RIPPER
PART OF 8Y-5065 HYDRAULIC AR
AN ATTACHMENT

i00197102 SEBP2242

8Y0639 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-4084	[1]	FILM-INSTRUCTION
2.	8Y-0698	[1]	LEVER AS (RIPPER)
	1B-6182	[1]	SPACER (13.11X19.05X1.18-MM THK)
3.	4L-6454	[3]	BOLT (3/8-16X1-IN)
	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
4.	3B-4610	[1]	PIN-COTTER
5.	3D-9609	[1]	ROD END
6.	4F-2294	[2]	NUT-JAM (5/16-24-THD)
7.	3D-8752	[1]	LOCKNUT (5/16-24-THD)
8.	9K-8757	[1]	ROD END
9.	8Y-0559	[1]	ROD
10.	5G-1825	[1]	LEVER AS
11.	4H-8380	[2]	PIN-SPRING
12.	8K-1255	[1]	PIN
13.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
14.	0L-1170	[1]	HANDLE-LEVER

#SEBP22420335

8Y-4983: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

8Y-4983 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT

i00197115 SEBP2242

8Y4983 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0L-1170	[1]	HANDLE-LEVER (BLADE TILT)
2.	135-3195	[1]	ROD AS
3.	4L-6454 C	[2]	BOLT (3/8-16X1-IN)
4.	6S-4789	[2]	SUPPORT AS
			(EACH INCLUDES)
	6K-3030	[1]	BUSHING
5.	8T-9043	[4]	BOLT (5/16-18X0.875-IN)
6.	8T-4224	[5]	WASHER-HARD (8.8X16X2-MM THK)
7.	6S-4792	[1]	LEVER
8.	6V-5782	[2]	BOLT (5/16-18X1.125-IN)
9.	3D-8752	[3]	LOCKNUT (5/16-24-THD)
10.	7H-3641	[2]	END-ROD (5/16-24-THD)
11.	5M-5479	[1]	ROD
12.	7X-3376	[6]	NUT-FULL (5/16-24-THD)
13.	5S-7382	[1]	BOLT (3/8-16X1.375-IN)
14.	5G-3138	[1]	LEVER AS
	5G-0400	[2]	BEARING
15.	7X-2501	[1]	BOLT (1/4-20X1.25-IN)
	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
	2D-6235	[1]	LOCKNUT (1/4-20-THD)
16.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	9K-8757	[3]	ROD END
18.	2H-2292	[1]	ROD-ADJUSTMENT
19.	1W-1180	[1]	ROD
20.	8T-2502	[2]	BOLT (3/8-16X1.125-IN)
21.	5G-0419	[1]	LEVER AS
	5G-0400	[2]	BEARING
22.	8T-4896 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
23.	5G-0278	[1]	SHAFT
24.	5G-0399	[1]	SHAFT
25.	3D-9609	[1]	ROD END
26.	1A-2457	[1]	PIN-CLEVIS
	3B-4610	[1]	PIN-COTTER
27.	031-4155	[2]	LOCKNUT (5/16-18-THD)
28.	8Y-5464	[1]	BRACKET AS
29.	105-0933 C	[1]	COVER AS
	9F-2978 C	[4]	NUT-WELD (3/8-16-THD)
30.	5G-1674	[1]	COVER AS
	8Y-3393	[1]	SPRING
	4B-4319	[2]	RIVET
31.	5G-0477	[1]	PLUG
	C		CHANGE FROM PREVIOUS TYPE

#SEBP22420336

8Y-4984: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

8Y-4984 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT

i00197116 SEBP2242

8Y4984 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-0274	[1]	ROD-ADJUSTMENT
2.	7X-3376	[4]	NUT-FULL (5/16-24-THD)
3.	7X-3374	[1]	NUT-FULL (1/2-20-THD)
4.	5G-0423	[1]	LEVER AS
	5G-0400	[2]	BEARING
5.	4J-2701	[1]	ROD END
	1J-4384	[1]	PIN-CLEVIS
	3B-4615	[1]	PIN-COTTER
6.	9B-7237	[4]	BOLT (3/8-16X1.25-IN)
7.	5G-0399	[2]	SHAFT
8.	5G-0325	[1]	BRACKET AS
9.	8T-9371	[4]	BOLT (3/8-16X0.5-IN)
10.	8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	3D-8752	[2]	LOCKNUT (5/16-24-THD)
12.	9K-8757	[2]	ROD END
13.	5G-0420	[1]	LEVER AS
	5G-0400	[2]	BEARING
14.	1W-1180	[1]	ROD
15.	7H-3641	[1]	END-ROD (5/16-24-THD)
16.	6V-5782	[1]	BOLT (5/16-18X1.125-IN)
17.	0L-1170	[1]	HANDLE-LEVER (BLADE TILT)
18.	8Y-0483	[1]	LEVER
19.	031-4155	[1]	LOCKNUT (5/16-18-THD)
20.	6S-3991	[1]	FILM-INSTRUCTION

#SEBP22420337

8Y-5053: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

8Y-5053 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 8Y-8248 HYDRAULIC AR

i00197892 SEBP2242

8Y5053 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3W-1473	[1]	HANDLE
2.	7X-3374	[1]	NUT-FULL (1/2-20-THD)
3.	7S-5757	[1]	RING-RETAINING
4.	8Y-5155	[1]	BOOT AS
5.	4M-6425	[8]	BOLT (5/16-18X1-IN)
6.	9B-7237	[8]	BOLT (3/8-16X1.25-IN)
7.	8T-4896	[11]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	5P-8167	[1]	BOLT (3/8-16X0.625-IN)
9.	3W-1491	[1]	SUPPORT
10.	8G-1825	[2]	ROD
11.	3D-8752	[2]	LOCKNUT (5/16-24-THD)
12.	6V-1033	[2]	END-BEARING ROD
13.	8Y-6143	[1]	ROD
14.	4L-9337	[1]	BOLT (3/8-16X1.5-IN)
15.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
16.	8Y-5384	[1]	BRACKET AS
17.	031-4155	[8]	LOCKNUT (5/16-18-THD)
18.	7X-3376	[10]	NUT-FULL (5/16-24-THD)
19.	7H-3641	[8]	END-ROD (5/16-24-THD)
20.	8Y-2986	[1]	LEVER AS
21.	6V-9528	[1]	FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)
22.	4L-6454	[2]	BOLT (3/8-16X1-IN)
23.	8Y-5156	[1]	LEVER
24.	8Y-5150	[1]	LEVER
25.	3W-1492	[1]	LEVER
26.	8Y-5151	[1]	YOKE
27.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
28.	5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-0798	[10]	BEARING-ROLLER
30.	8T-0741	[10]	SEAL-LIP TYPE
31.	8Y-5158	[1]	SHAFT
32.	8Y-5157	[1]	SHAFT
33.	8Y-5153	[1]	SHAFT AS
34.	3W-1482	[1]	SHAFT AS
35.	1B-8704	[1]	KEY-WOODRUFF
36.	8G-4658	[1]	ROD
37.	6S-7982	[1]	SPACER (50MM THK)
38.	2K-4973	[1]	LOCKNUT (3/8-16-THD)
39.	2M-2292	[1]	ROD
40.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)

#SEBP22420338

8Y-7111: CONTROL GP-HYDRAULIC HAND

CONTROL GP-HYDRAULIC HAND

8Y-7111 CONTROL GP-HYDRAULIC HAND
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT

i00197175 SEBP2242

8Y7111 CONTROL GP-HYDRAULIC HAND Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-4084	[1]	FILM-INSTRUCTION (RIPPER LIFT, LOWER)
2.	8Y-7112	[1]	LEVER AS
	1B-6182	[1]	SPACER (13.11X19.05X1.18-MM THK)
3.	4L-6454	[3]	BOLT (3/8-16X1-IN)
	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
4.	3B-4610	[1]	PIN-COTTER
5.	3D-9609	[1]	ROD END
6.	4F-2294	[2]	NUT-JAM (5/16-24-THD)
7.	3D-8752	[2]	LOCKNUT (5/16-24-THD)
8.	9K-8757	[1]	ROD END
9.	8Y-0559	[1]	ROD
10.	8Y-7113	[1]	LEVER AS
11.	4H-1641	[1]	PIN-SPRING
12.	8K-1255	[1]	PIN
13.	0L-1170	[1]	HANDLE-LEVER

#SEBP22420339

8Y-5052: CONTROL GP-TRANSMISSION

CONTROL GP-TRANSMISSION

8Y-5052 CONTROL GP-TRANSMISSION
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 8Y-8193, 8Y-8194 POWER TRAIN AR

i00197891 SEBP2242

8Y5052 CONTROL GP-TRANSMISSION Parts scheme

For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-5794 C	[1]	PLATE
2.	4B-1281	[4]	SCREW-MACHINE (1/4-20X0.625-IN)
3.	1K-9060 C	[2]	SEAL-LIP TYPE
4.	5G-5726	[1]	KNOB
5.	8Y-1340	[1]	LEVER
6.	5P-1075 C	[7]	WASHER-HARD (10.2X22.5X3-MM THK)
7.	9K-8757	[4]	ROD END
	4F-2294	[8]	NUT-JAM (5/16-24-THD)
8.	5G-1671	[1]	BRACKET
9.	3N-7824	[1]	ROD
10.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
11.	5G-1092	[2]	LEVER AS
12.	2Y-1834	[1]	CLIP
13.	3N-2843	[1]	ROD
14.	4L-6454 C	[16]	BOLT (3/8-16X1-IN)
15.	8T-4896	[23]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	8Y-4955	[1]	BRACKET AS
17.	5S-7379	[11]	BOLT (3/8-16X0.875-IN)
18.	5P-8167	[1]	BOLT (3/8-16X0.625-IN)
19.	5G-1034	[1]	COVER
20.	8Y-5195	[1]	BRACKET
21.	5G-1086	[1]	BRACKET
22.	5G-1181	[1]	LEVER
23.	5G-0400	[2]	BEARING
24.	1D-5117	[1]	NUT-JAM (1/2-13-THD)
25.	6V-8189	[1]	NUT (5/16-18-THD)
	8S-7271	[1]	SETSCREW
26.	2M-8908	[1]	KNOB
27.	137-5945	[1]	SPRING
28.	8Y-5194	[1]	LEVER AS
29.	9L-8660	[2]	SEAL-LIP TYPE
30.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	5B-5821	[1]	DOWEL
32.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
33.	6D-6187 B	[1]	SHIM (0.127-MM THK)
	6D-6189 B	[3]	SHIM (0.254-MM THK)
34.	6V-8801	[1]	NUT (3/8-16-THD)
35.	2K-8467	[1]	PIN-SPRING
36.	5G-1158	[1]	SHAFT
37.	5G-1157	[1]	YOKE
38.	8T-5361	[2]	WASHER-HARD (28X49X5-MM THK)
39.	9X-2306	[1]	WASHER (11X50X5-MM THK)
40.	9S-1354	[6]	NUT (5/8-18-THD)
	8T-4122	[6]	WASHER-HARD (17X32X3.5-MM THK)
	1V-6341	[2]	SEAL
41.	8D-5295	[2]	PIN
	8D-5294	[2]	RING
42.	4K-8603	[1]	PLUG-CUP
43.	4F-7952	[2]	SEAL-O-RING
44.	5G-5741	[2]	HOUSING
45.	1B-8704	[2]	KEY-WOODRUFF
46.	5G-1253	[2]	LEVER
47.	9D-5506	[2]	ROD END
48.	9M-1311	[4]	NUT-JAM (1/4-28-THD)
49.	5G-1031	[1]	HOUSING
	9S-4684	[1]	PLUG
	3J-1907	[1]	SEAL-O-RING
50.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
51.	6J-2256	[2]	PIN
	3B-4610	[2]	PIN-COTTER
	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
52.	9H-2400	[2]	BEARING
53.	5G-1061	[2]	BEARING
54.	8C-5604	[2]	CABLE AS
55.	5G-5743	[2]	ROD END
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

Information:

OPERATOR STATION

AIR CONDITIONER GP

Special Instruction

Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}

Specifications

Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines

System Capacities for Refrigerant (Track-Type Tractors)
Air Conditioning and Heating R134a for All Caterpillar Machines

Tool Operating Manual

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

Systems Operation

Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines

Glossary of Terms
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Expansion Valve System
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Orifice Tube System
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Condenser
Air Conditioning and Heating R134a for All Caterpillar Machines

Evaporator Coil
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Compressor Protection System
Air Conditioning and Heating R134a for All Caterpillar Machines

Identifying the Air Conditioning System
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Expansion Valve
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Accumulator
Air Conditioning and Heating R134a for All Caterpillar Machines

In-line Refrigerant Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Receiver-Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines

Identifying the Heating System
Air Conditioning and Heating R134a for All Caterpillar Machines

Temperature Control
Air Conditioning and Heating R134a for All Caterpillar Machines

Identifying the Refrigerant
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines

Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines

General Information
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Orifice Tube Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines

Custom Service Information

Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines

Testing and Adjusting

Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines

Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant System - Evacuate
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Leakage - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines

Electronic Heat Control - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Compressor - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Air Conditioning Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Oil - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant System - Flush
Air Conditioning and Heating R134a for All Caterpillar Machines

Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines

Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Heater Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines

Troubleshooting

Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines

Machine Preparation for Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines

General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines

Visual Inspection (Troubleshooting)
Air Conditioning and Heating R134a for All Caterpillar Machines

Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines

Troubleshooting Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines

Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines

Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines

Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines

Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines

General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines

Disassembly and Assembly

Air Conditioning
D3C, D4C AND D5C SERIES III TRACTORS MACHINE SYSTEMS

Air Conditioning
SUPPLEMENT FOR - 3046 ENGINE D3C, D4C AND D5C SERIES III TRA

Refrigerant Expansion Valve - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Accumulator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines

In-Line Refrigerant Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Receiver-Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

General Information
Air Conditioning and Heating R134a for All Caterpillar Machines

Refrigerant Orifice Tube Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Magazine

New Air Conditioning Accumulators Improve Service Life {7309}
1998/02/02

New Fans Improve Reliability Of The Air Conditioner Condenser Group{1805,7320}
1998/05/04

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08

Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30

Preparation of Air Conditioner Units for Seasonal Use {7320}
2002/05/27

Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}

Refrigerant Identification Instrument is Available {1809}
2006/08/14

Correction to Troubleshooting , "Required Tools" {1808}
2010/10/06

New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06

An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog D4C III :

8Y-8185 CONDENSER & MTG GP-REFRIGERANT

3E-1908 COMPRESSOR GP-REFRIGERANT

3E-1907 COMPRESSOR GP-REFRIGERANT

100-9961 COMPRESSOR & MTG GP-REFRIG

140-2972 CAB GP

101-9616 CONDENSER GP-REFRIGERANT

116-7616 CONTROL GP-HYDRAULIC HAND

117-3530 CONTROL GP-HYDRAULIC HAND

8Y-0639 CONTROL GP-HYDRAULIC HAND

8Y-4983 CONTROL GP-HYDRAULIC HAND

8Y-4984 CONTROL GP-HYDRAULIC HAND

8Y-5053 CONTROL GP-HYDRAULIC HAND

8Y-7111 CONTROL GP-HYDRAULIC HAND

Truck sale:

22,500

Caterpillar D4CIIILGP, Construction
- Dozers
MICHIGAN CAT

29,500

Caterpillar D4CIII, Construction
- Dozers
MICHIGAN CAT

22,400

Caterpillar D4CIIIXL, Construction
- Dozers
N C MACHINERY CO.

CATERPILLAR D4CIII 1997
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4CIII 2000
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;