AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1027737 LINES GP-SWING 325-A EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-SWING
LINES GP-TRAVEL MOTOR
MOTOR GP

EXCAVATOR 325-A EXCAVATOR 6RM
 325, 325L EXCAVATOR 6RM00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2291 325-A 6RM   (1993)

HYDRAULIC SYSTEM

LINES GP-SWING
LINES GP-SWING
102-7737 LINES GP-SWING
 

#SEBP22910350
 

102-7737: LINES GP-SWING

1027737 LINES GP-SWING
c594025 SEBP2291
1027737 LINES GP-SWING Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9403 [4] FLANGE-HALF  
2. 8T-4121 [8] WASHER  
3. 8T-4182 M [8] BOLT  
4. 1P-3702 [2] SEAL-RECTANGULAR  
5. 087-5606 I [1] HOSE AS  
6. 123-3168 [1] HOSE AS  
7. 6V-9746 [2] SEAL-O-RING (22.5MM OD)  
8. 6V-8637 [2] CONNECTOR-SEAL  
9. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP22910351
 

087-5083: LINES GP-TRACK MOTOR

875083 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 6RM1-UP
7Y4800-PAGE 273
c750174 SEBP2291
0875083 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP22910352
 

087-5083: LINES GP-TRACK MOTOR

875083 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 6RM1-UP
c750175 SEBP2291
0875083 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP22910353
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 1 OF 2
S/N 7LM1-UP
7Y4800-PAGE 273
c539388 SEBP2291
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4182 M [4] BOLT  
2. 8T-4133 M [4] NUT  
3. 8T-4121 C [14] WASHER  
4. 8T-4192 M [4] BOLT  
5. 087-4644 [2] PLATE AS  
6. 5P-7468 [4] CLIP (SLOT)  
7. 5P-7469 [4] CLIP (TAB)  
8. 8T-2525 [4] GROMMET  
9. 4I-1801 I [1] HOSE AS  
10. 4I-1804 I [1] HOSE AS  
11. 4I-5546 [1] SUPPORT  
12. 8T-4223 C [20] WASHER  
13. 1P-3703 [4] SEAL-RECTANGULAR  
14. 8T-4184 CM [16] BOLT  
15. 4I-1807 I [1] HOSE AS  
16. 4I-1810 I [1] HOSE AS  
17. 6V-0400 [8] FLANGE-HALF  
18. 5K-9090 [4] SEAL (23.52MM) ID  
19. 9X-6032 M [16] BOLT-SOCKET HEAD  
20. 7Y-3730 [4] FLANGE-SPECIAL  
21. 4J-5267 [4] SEAL (24.99MM ID)  
22. 7Y-4800 Y [1] SWIVEL GP  
23. 1U-8846 B LIQUID GASKET (2 ML)  
24. 8T-4136 M [6] BOLT  
25. 5P-1076 [2] WASHER-HARD  
26. 8T-4648 M [2] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22910354
 

087-5085: LINES GP-TRACK MOTOR

875085 LINES GP-TRACK MOTOR-PART 2 OF 2
S/N 7LM1-UP
c565352 SEBP2291
0875085 LINES GP-TRACK MOTOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [12] SEAL-RECTANGULAR  
2. 087-5559 [1] TUBE AS  
3. 087-5558 [1] TUBE AS  
4. 7Y-4538 [8] CLAMP-HALF  
5. 8T-4139 CM [8] BOLT  
6. 8T-4223 [40] WASHER-HARD  
7. 087-5560 [1] TUBE AS  
8. 087-5557 [1] TUBE AS  
9. 6V-8724 [2] ELBOW  
10. 3J-1907 [2] SEAL-O-RING  
11. 6V-8397 [4] SEAL-O-RING  
12. 6V-8639 C [2] CONNECTOR-SEAL  
13. 3K-0360 [2] SEAL-O-RING  
14. 6V-8398 C [5] SEAL-O-RING  
15. 9X-6032 M [16] BOLT-SOCKET HEAD  
16. 6K-0806 C [6] STRAP-CABLE  
17. 6V-8774 [1] TEE  
18. 4I-7744 C [2] CLAMP  
19. 087-5471 [1] CHANNEL  
20. 8T-5005 M [2] BOLT  
21. 8T-4121 [2] WASHER  
22. 6V-0400 [19] FLANGE-HALF  
23. 8T-4184 CM [32] BOLT  
24. 4I-7745 C [1] CONNECTOR  
25. 3D-2824 [1] SEAL-O-RING  
26. 6V-9844 C [1] TEE-SWIVEL  
27. 087-5528 I [2] HOSE AS  
28. 087-6545 I [2] HOSE AS  
29. 5I-8853 C [2] HOSE AS  
30. 5I-8696 C [1] HOSE AS  
31. 5I-8864 C [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP22910355
 

102-8353: MOTOR GP-SWING

1028353 MOTOR GP-PISTON-PART 1 OF 2
4I1024-PAGE 296
PART OF 1028352 MOTOR & MOUNTING
c753791 SEBP2291
1028353 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1714 J [1] SEAL-O-RING  
2. 7Y-4270 [1] BEARING AS-ROLLER  
3. 7Y-4252 [3] SPACER  
4. 6V-5204 [2] RING  
5. 7Y-4257 [1] SPACER  
6. 7Y-4258 [1] SPACER  
7. 7Y-4255 [1] SPRING  
8. 7Y-4293 [4] PLATE  
9. 7Y-4292 [3] PLATE-FRICTION  
10. 7Y-4294 J [1] SEAL-O-RING  
11. 5J-2383 J [1] SEAL-O-RING  
12. 7Y-4290 [1] PISTON-BRAKE  
13. 7Y-4291 [20] SPRING-BRAKE  
14. 096-3021 [2] SEAL-O-RING  
15. 9S-4191 [2] PLUG-O-RING  
16. 3J-1907 J [2] SEAL-O-RING (11.89MM ID)  
17. 6V-8754 [1] RING-RETAINING  
18. 7Y-4269 [1] BEARING AS-ROLLER  
19. 4I-7787 [1] PLATE  
20. 4I-5849 J [1] SEAL-O-RING  
21. 4I-1024 Y [1] VALVE GP-BRAKE  
22. 095-0939 [1] RING-RETAINING  
23. 111-1116 [1] BARREL  
24. 7Y-4256 [12] PIN  
25. 7Y-4254 [1] BUSHING-TERMINAL  
26. 7Y-4261 [1] PLATE  
27. 4I-6448 [1] PISTON AS  
28. 111-1115 [1] BODY  
29. 7Y-4262 [1] PLATE  
30. 096-1533 J [1] SEAL-LIP  
31. 7Y-4251 [1] SHAFT-DRIVE  
32. 7Y-4266 [1] RETAINER  
33. 6V-5203 [1] RING  
34. 5I-8626 [2] PLUG  
35. 5I-8700 [1] HEAD GP-MOTOR  
36. 5I-8701 [1] HEAD  
37. 099-8111 [2] PIN-SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22910356
 

102-8353: MOTOR GP-SWING

1028353 MOTOR GP-PISTON-PART 2 OF 2
5I8641-PAGE 310,4I7788-PAGE 324
PART OF 1028352 MOTOR & MOUNTING
c753792 SEBP2291
1028353 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
38. 7Y-4268 [2] SPRING  
39. 7Y-4274 [1] PLUG  
40. 095-1579 J [1] SEAL-O-RING  
41. 094-1900 [2] PLUG  
42. 4I-7788 Y [2] VALVE GP-RELIEF  
43. 7Y-5221 M [4] BOLT-SOCKET HEAD  
44. 7Y-4267 [2] VALVE  
45. 095-1595 J [2] SEAL-O-RING  
46. 5I-8641 Y [1] VALVE GP-CUSHION RELIEF  
47. 5I-4310 [1] PLATE-IDENTIFICATION  
48. 5B-9304 [2] SCREW-DRIVE  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE :
  7Y-4295 [1] KIT-SEAL  
    (INCLS PARTS MARKED J
    IN ILLUS PARTS 1 & 2)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22910357
 

7Y-4260: MOTOR GP-TRAVEL

7Y4260 MOTOR GP-TRAVEL-PART 1 OF 2
TYPE 1
PART OF 7Y4288 MOTOR & MOUNTING
c758813 SEBP2291
7Y4260 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4204 [1] SHAFT-DRIVE  
2. 7Y-4223 [2] ADJUSTER  
3. 096-3975 [2] SPRING  
4. 7Y-4212 [1] BEARING  
5. 096-3976 [2] PISTON  
6. 5F-6199 [2] BALL  
7. 1R-5478 [1] BODY  
8. 096-3974 [2] KEY  
9. 7Y-4214 [3] PLATE-FRICTION  
10. 094-1402 [3] PLATE-SEPARATOR  
11. 096-1523 [1] GUIDE-PISTON  
12. 7Y-4213 [1] PISTON-BRAKE  
13. 096-4377 [1] SEAL-O-RING  
14. 7Y-4202 [1] HEAD  
15. 8T-4944 M [9] BOLT-SOCKET HEAD  
16. 095-7382 [1] RETAINER  
17. 095-7380 [1] SPRING  
18. 095-1585 [1] SEAL-O-RING  
19. 087-4742 [1] VALVE  
20. 096-1519 [1] SEAT  
21. 096-5915 [2] RETAINER  
22. 096-5919 [2] RING  
23. 095-1572 [2] SEAL-O-RING  
24. 2D-6642 [2] BALL  
25. 096-5916 [2] SEAT  
26. 094-1399 [2] RING-RETAINING  
27. 096-4376 [1] SEAL-LIP  
28. 095-1586 [2] SEAL-O-RING  
29. 7Y-4217 [2] RING  
30. 096-4391 [2] NUT  
  M   METRIC PART
 

#SEBP22910358
 

7Y-4260: MOTOR GP-TRAVEL

7Y4260 MOTOR GP-TRAVEL-PART 2 OF 2
TYPE 1
PART OF 7Y4288 MOTOR & MOUNTING
c758814 SEBP2291
7Y4260 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
31. 096-4387 [1] GUIDE-BALL  
32. 7I-7481 [1] PLATE-CAM  
33. 4I-8834 [1] PISTON AS  
34. 7Y-4209 [1] BARREL AS  
35. 095-1685 [1] SEAL-O-RING  
36. 096-1521 B [1] SHIM (1.0MM THK)  
  096-3785 B [1] SHIM (1.2MM THK)  
  096-3786 B [1] SHIM (1.4MM THK)  
  096-3787 B [1] SHIM (1.6MM THK)  
  096-1522 B [1] SHIM (2.0MM THK)  
  096-3788 B [1] SHIM (1.8MM THK)  
37. 095-7378 [1] WASHER SET  
38. 096-4003 [1] BEARING SET  
39. 094-1875 [1] DOWEL  
40. 095-1575 [3] SEAL-O-RING  
41. 9S-4185 [1] PLUG-O-RING  
42. 3K-0360 [1] SEAL-O-RING  
43. 095-1700 [2] SEAL-O-RING  
44. 095-7419 [4] SCREW-DRIVE  
45. 7Y-4220 [1] PLATE-IDENTIFICATION  
46. 8T-6759 [10] PLUG-PIPE  
47. 096-4378 [1] RING  
48. 096-4377 [1] SEAL-O-RING  
49. 8T-6759 B [1] PLUG-PIPE  
50. 095-7384 [1] SEAL-O-RING  
51. 095-7383 [1] SEAL-O-RING  
52. 095-7386 [1] RING  
53. 095-7387 [1] RING  
54. 096-4389 [9] SPRING  
55. 7Y-4215 [1] SPACER  
56. 7Y-4219 [1] ADAPTER  
57. 2M-9780 [1] SEAL-O-RING  
58. 7Y-4216 [1] SPOOL  
59. 096-3978 [1] SPRING  
60. 7Y-4224 [2] ORIFICE  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7Y-4222 [1] KIT-SEAL  
  B   USE AS REQUIRED
 

#SEBP22910359
 

7Y-4260: MOTOR GP-TRAVEL

7Y4260 MOTOR GP-TRAVEL
TYPE 2
PART OF 7Y4288 MOTOR & MOUNTING
c677802 SEBP2291
7Y4260 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4204 [1] SHAFT-DRIVE  
2. 087-4743 C [2] STOPPER  
3. 087-4786 C [1] ADAPTER  
4. 094-1399 [2] RING-RETAINING  
5. 7Y-4212 [1] BEARING  
6. 087-4757 C [2] PISTON  
7. 2M-9780 J [1] SEAL-O-RING (19.18MM ID)  
8. 1R-5478 [1] BODY  
9. 122-5114 [1] GUIDE-BALL  
10. 7I-7481 C [1] PLATE-CAM  
11. 4I-8834 [1] PISTON AS  
12. 7Y-4209 [1] BARREL AS  
13. 7Y-4214 [3] PLATE-FRICTION  
14. 094-1402 [3] PLATE-SEPARATOR  
15. 096-1523 [1] GUIDE-PISTON  
16. 7Y-4213 [1] PISTON-BRAKE  
17. 7Y-4202 [1] HEAD  
18. 8T-4944 M [9] BOLT-SOCKET HEAD (M16X2X40MM)  
19. 096-1521 B [1] SHIM (1.0MM THK)  
20. 096-3785 B [1] SHIM (1.2MM THK)  
21. 096-3786 B [1] SHIM (1.4MM THK)  
22. 096-3787 B [1] SHIM (1.6MM THK)  
23. 096-1522 B [1] SHIM (2.0MM THK)  
24. 096-3788 B [1] SHIM (1.8MM THK)  
25. 096-5916 [2] SEAT  
26. 2D-6642 [2] BALL  
27. 095-1572 J [2] SEAL-O-RING (4.80MM ID)  
28. 096-5919 J [2] RING  
29. 096-5915 [2] RETAINER  
30. 096-4003 [1] BEARING SET  
31. 095-1585 J [1] SEAL-O-RING (17.80MM ID)  
32. 087-4742 [1] VALVE  
33. 096-1519 [1] SEAT  
34. 095-7380 [1] SPRING  
35. 095-7382 [1] RETAINER  
36. 094-1875 [1] DOWEL  
37. 095-7378 [1] WASHER SET  
38. 8T-6759 [10] PLUG-PIPE (1/16-27 THD)  
39. 095-1575 J [3] SEAL-O-RING (7.80MM ID)  
40. 096-4378 J [1] RING  
41. 096-4377 J [2] SEAL-O-RING (190.0MM ID)  
42. 8T-6759 [1] PLUG-PIPE (1/16-27 THD)  
43. 095-7384 J [1] SEAL-O-RING (160.0MM ID)  
44. 095-7383 J [1] SEAL-O-RING (174MM ID)  
45. 095-7386 J [1] RING  
46. 095-7387 J [1] RING  
47. 095-1685 J [1] SEAL-O-RING (179.3MM ID)  
48. 096-4389 [9] SPRING  
49. 7Y-4215 [1] SPACER  
50. 095-1586 J [2] SEAL-O-RING (19.80MM ID)  
51. 7Y-4217 J [2] RING  
52. 7Y-4216 [1] SPOOL  
53. 096-4376 J [1] SEAL-LIP  
54. 087-4788 C [2] KEY  
55. 7Y-4224 [2] ORIFICE  
56. 096-3978 [1] SPRING  
57. 3K-0360 J [1] SEAL-O-RING (16.36MM ID)  
58. 9S-4185 [1] PLUG-O-RING (3/4-16 THD)  
59. 095-1700 J [2] SEAL-O-RING (34.40MM ID)  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
   
  7Y-4222 [1] KIT-SEAL  
    (INCLS PARTS MARKED J)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 325-A :

LINES GP-STICK
133-8617 LINES GP-STICK
LINES GP-STICK
7Y-7973 LINES GP-STICK
LINES GP-STICK
7Y-7972 LINES GP-STICK
LINES GP-STICK
7Y-7971 LINES GP-STICK
LINES GP-STICK
116-7016 LINES GP-STICK
LINES GP-STICK
7Y-7970 LINES GP-STICK
LINES GP-STICK
7Y-7969 LINES GP-STICK
LINES GP-STICK
116-9132 LINES GP-STICK
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5083 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
LINES GP-TRACK MOTOR
087-5085 LINES GP-TRACK MOTOR
MOTOR GP-SWING
102-8353 MOTOR GP-SWING
MOTOR GP-SWING
102-8353 MOTOR GP-SWING
MOTOR GP-TRAVEL
7Y-4260 MOTOR GP-TRAVEL
MOTOR GP-TRAVEL
7Y-4260 MOTOR GP-TRAVEL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.