AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9X-3267 VALVE GP-SOLENOID S/N 3CL1200-UP 24 VOLT PART OF 118-2608 CONTROL & LINES GP-RIDE AN ATTACHMENT IT28F


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
STEERING SYSTEM
CYLINDER GP
LINES GP
PUMP GP
PUMP GP-METERING

INTEGRATED TOOLCARRIER IT28F INTEGRATED TOOLCARRIER 3CL
 IT28F Integrated Toolcarrier 3CL01200-UP (MACHINE) POWERED BY 3116 Engine SEBP2366 IT28F 3CL   (1992)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8351 VALVE GP-SOLENOID
VALVE GP-SOLENOID
8T-8808 VALVE GP-SOLENOID
VALVE GP-SOLENOID
9X-3267 VALVE GP-SOLENOID
 

#SEBP23660390
 

9X-3267: VALVE GP-SOLENOID

9X-3267 VALVE GP-SOLENOID
S/N 3CL1200-UP
24 VOLT
PART OF 118-2608 CONTROL & LINES GP-RIDE
AN ATTACHMENT
i00195171 SEBP2366
9X3267 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 157-2284 J [1] LOCKNUT-SPECIAL (5/8-18-THD)  
2. 160-4953 J [1] SPACER (20.8-MM THK)  
3. 9X-5432 [1] COIL AS  
4. 1S-9593 [2] STRAP-CABLE  
5. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
   
    AVAILABLE REPAIR KIT(S):
  160-4957 J [1] KIT-SERVICE  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP23660391
 

9C-5010: CYLINDER & MTG GP-STEERING

9C-5010 CYLINDER & MTG GP-STEERING
S/N 3CL1200-UP
PART OF 116-1011 CHASSIS AR
i00195847 SEBP2366
9C5010 CYLINDER & MTG GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-6646 Y [2] CYLINDER GP-STEERING  
2. 4E-4524 [4] PIN AS  
3. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
4. 7X-0618 [4] WASHER-HARD (13.5X40X5-MM THK)  
5. 9D-1535 B [4] WASHER-THRUST (44.8X101.6X1.22-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660392
 

9T-6646: CYLINDER GP-STEERING

9T-6646 CYLINDER GP-STEERING
S/N 3CL1200-UP
70 MM (3 IN) BORE X 472 MM (19 IN) STROKE
PART OF 9C-5010 CYLINDER & MTG GP-STEERING
i00195886 SEBP2366
9T6646 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-6674 [1] CYLINDER AS  
1A. 4D-4431 [1] BEARING-ALIGNING  
2. 226-8202 J [1] SEAL-WIPER  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 5J-7010 J [1] SEAL AS  
5. 8J-0112 J [1] RING-WEAR  
6. 9T-2457 [1] PISTON  
7. 4T-6780 J [1] RING-WEAR  
8. 167-2294 J [1] SEAL-U-CUP  
9. 167-2186 J [1] SEAL AS-BUFFER  
10. 6E-4940 [1] HEAD  
11. 9T-6672 [1] ROD AS  
11A. 4D-4431 [1] BEARING-ALIGNING  
12. 378-2695 M [1] BOLT (M20X2.5X70-MM)  
13. 4J-9225 J [1] RING-BACKUP  
14. 5H-8848 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  233-9204 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (ALSO INCLUDES O-RING SEAL)
    (FOR USE WITH REHS1392)
  472-8025 [1] KIT-HYDRAULIC CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP23660393
 

116-0974: LINES GP-STEERING

116-0974 LINES GP-STEERING
S/N 3CL1200-1423
PART OF 116-0975 STEERING AR-SECONDARY
AN ATTACHMENT
i00195990 SEBP2366
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING  
10. 3J-7354 [2] SEAL-O-RING  
11. 2M-9780 [4] SEAL-O-RING  
12. 3K-0360 [4] SEAL-O-RING  
13. 3J-1907 [1] SEAL-O-RING  
14. 4J-0520 [1] SEAL-O-RING  
15. 3D-2824 [1] SEAL-O-RING  
16. 7J-9108 [12] SEAL-O-RING  
17. 7M-8485 [1] SEAL-O-RING  
18. 6V-9746 [6] SEAL-O-RING  
19. 8C-7563 [1] ELBOW  
20. 112-4860 [1] TEE-O-RING  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE  
24. 6V-8626 [2] ELBOW  
25. 6V-9200 [2] ELBOW  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP  
    (EACH INCLUDES)
  6V-8556 [1] NUT (1-3/16-12-THD)  
28. 6V-0852 [1] CAP-DUST  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR  
35. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
36. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
43. 8T-4133 M [1] NUT (M10X1.5-THD)  
44. 6V-9168 [1] NUT (11/16-16-THD)  
45. 9T-6689 Y [1] PUMP GP-METERING (HMU)  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 6G-0237 [1] SEAL  
48. 5P-5148 [1] STRAP-CABLE  
49. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
50. 8T-1685 [1] TEE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660394
 

116-0974: LINES GP-STEERING

116-0974 LINES GP-STEERING
S/N 3CL1424-UP
PART OF 116-0975 STEERING AR-SECONDARY
Type 1
AN ATTACHMENT
i00195991 SEBP2366
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING  
10. 3J-7354 [2] SEAL-O-RING  
11. 2M-9780 [4] SEAL-O-RING  
12. 3K-0360 [4] SEAL-O-RING  
13. 5P-5148 [1] STRAP-CABLE  
14. 4J-0520 [1] SEAL-O-RING  
15. 3D-2824 [1] SEAL-O-RING  
16. 7J-9108 [12] SEAL-O-RING  
17. 7M-8485 [1] SEAL-O-RING  
18. 6V-9746 [6] SEAL-O-RING  
19. 8C-7563 [1] ELBOW  
20. 8T-2883 [1] TEE  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE  
24. 6V-8626 [2] ELBOW  
25. 6V-9200 [2] ELBOW  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP  
    (EACH INCLUDES)
  6V-8556 [1] NUT (1-3/16-12-THD)  
28. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR  
35. 8T-1685 [1] TEE  
36. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
43. 8T-4133 M [1] NUT (M10X1.5-THD)  
44. 6V-9168 [1] NUT (11/16-16-THD)  
45. 9T-6689 Y [1] PUMP GP-METERING (HMU)  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 6G-0237 [1] SEAL  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660395
 

116-0974: LINES GP-STEERING

116-0974 LINES GP-STEERING
S/N 3CL1424-UP
PART OF 116-0975 STEERING AR-SECONDARY
Type 2
AN ATTACHMENT
i00746915 SEBP2366
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING  
10. 3J-7354 [2] SEAL-O-RING  
11. 2M-9780 [4] SEAL-O-RING  
12. 3K-0360 [4] SEAL-O-RING  
13. 5P-5148 [1] STRAP-CABLE  
14. 4J-0520 [1] SEAL-O-RING  
15. 3D-2824 [1] SEAL-O-RING  
16. 7J-9108 [12] SEAL-O-RING  
17. 7M-8485 [1] SEAL-O-RING  
18. 6V-9746 [6] SEAL-O-RING  
19. 8C-7563 [1] ELBOW  
20. 8T-2883 [1] TEE  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE  
24. 6V-8626 [2] ELBOW  
25. 6V-9200 [2] ELBOW  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP  
    (EACH INCLUDES)
  6V-8556 [1] NUT (1-3/16-12-THD)  
28. 8T-4186 CM [1] BOLT (M10X1.5X40-MM)  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR  
35. 8T-1685 [1] TEE  
36. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 8T-4121 C [4] WASHER-HARD (11X21X2.5-MM THK)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
43. 8T-4133 M [1] NUT (M10X1.5-THD)  
44. 6V-9168 [1] NUT (11/16-16-THD)  
45. 119-8769 YC [1] PUMP GP-METERING (HMU)  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
47. 6G-0237 [1] SEAL  
48. 7X-7729 C [1] WASHER (11X25X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660396
 

9C-8508: PUMP & LINES GP-SEC STEERING

9C-8508 PUMP & LINES GP-SEC STEERING -SUPPLEMENTAL STEERING
S/N 3CL1200-UP
PART OF 116-0975 STEERING AR-SECONDARY
AN ATTACHMENT
i00195882 SEBP2366
9C8508 PUMP & LINES GP-SEC STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
2. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 6V-0397 [2] FLANGE-HALF  
4. 9C-9452 I [1] HOSE AS  
5. 4J-0522 [2] SEAL-O-RING  
6. 4E-1013 [1] TUBE AS  
7. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
8. 6V-8943 [1] REDUCER  
9. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
10. 5P-2369 [2] CLIP (LOOP)  
11. 6Y-0908 [1] COUPLER-PUMP  
12. 6V-9832 [1] CAP  
  6V-8556 [1] NUT (1-3/16-12-THD)  
13. 9T-9803 Y [1] PUMP GP-GEAR  
14. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
15. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
16. 103-6317 Y [1] VALVE GP-UNLOADING  
17. 4J-0520 [1] SEAL-O-RING  
18. 4E-1018 [1] TUBE AS  
19. 6V-9850 [1] ELBOW  
20. 6V-8397 [3] SEAL-O-RING  
21. 6V-8724 [1] ELBOW  
22. 3J-1907 [1] SEAL-O-RING  
23. 4E-1015 [1] TUBE AS  
24. 6V-8640 [1] CONNECTOR  
25. 2M-9780 [2] SEAL-O-RING  
26. 6V-9746 [6] SEAL-O-RING  
27. 6V-8637 [1] CONNECTOR  
28. 4E-1014 [1] TUBE AS  
29. 7M-8485 [1] SEAL-O-RING  
30. 4E-1023 I [1] HOSE AS  
31. 6V-9160 [1] TEE-FACE SEAL  
32. 9R-9072 I [1] HOSE AS  
33. 7J-9108 [2] SEAL-O-RING  
34. 5H-6005 [4] SEAL-O-RING  
35. 2N-7007 [1] GASKET  
36. 3E-6450 [1] SWITCH AS-PRESSURE  
  3E-3370 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
37. 4P-7581 [3] CLIP (LADDER)  
38. 3K-0360 [1] SEAL-O-RING  
39. 9X-6772 [3] STRAP-CABLE  
40. 3E-9995 [1] FILM-FACE  
41. 6V-9182 [1] ELBOW  
42. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
43. 3D-2824 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660397
 

9C-8508: PUMP & LINES GP-SEC STEERING

9C-8508 PUMP & LINES GP-SEC STEERING -SUPPLEMENTAL STEERING
S/N 3CL1200-UP
AN ATTACHMENT
i00195883 SEBP2366
9C8508 PUMP & LINES GP-SEC STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
2. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 6V-0397 [2] FLANGE-HALF  
4. 9C-9452 I [1] HOSE AS  
5. 4J-0522 [2] SEAL-O-RING  
6. 129-1903 [1] TUBE AS  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 6V-8943 [1] REDUCER  
9. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
10. 3D-2824 [1] SEAL-O-RING  
11. 6Y-0908 [1] COUPLER-PUMP  
12. 9S-4185 [1] PLUG (3/4-16-THD)  
13. 9T-9803 Y [1] PUMP GP-GEAR  
14. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
15. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
16. 103-6317 Y [1] VALVE GP-UNLOADING  
17. 4J-5267 [1] SEAL-O-RING  
18. 4E-1018 [1] TUBE AS  
19. 6V-9807 [1] UNION  
20. 6V-8397 [3] SEAL-O-RING  
21. 8T-0788 [1] ELBOW  
22. 3J-1907 [2] SEAL-O-RING  
23. 4E-1015 [1] TUBE AS  
24. 6V-8640 [1] CONNECTOR  
25. 2M-9780 [2] SEAL-O-RING  
26. 6V-9746 [6] SEAL-O-RING  
27. 6V-8637 [1] CONNECTOR  
28. 4E-1014 [1] TUBE AS  
29. 7M-8485 [1] SEAL-O-RING  
30. 9R-1111 I [1] HOSE AS  
31. 6V-9160 [1] TEE-FACE SEAL  
32. 9R-9072 I [1] HOSE AS  
33. 7J-9108 [2] SEAL-O-RING  
34. 9S-4191 [1] PLUG (9/16-18-THD)  
35. 2N-7007 [1] GASKET  
36. 3E-6450 [1] SWITCH AS-PRESSURE  
  3E-3370 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
37. 4P-7581 [3] CLIP (LADDER)  
38. 3K-0360 [2] SEAL-O-RING  
39. 7K-1181 C [5] STRAP-CABLE  
40. 3E-9995 [1] FILM-FACE  
41. 6V-9182 [1] ELBOW  
42. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23660398
 

9T-9803: PUMP GP-GEAR

9T-9803 PUMP GP-GEAR
S/N 3CL1200-UP
PART OF 9C-8508 PUMP & LINES GP-SEC STEERING
AN ATTACHMENT
i00195637 SEBP2366
9T9803 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4806 [1] SEAL-LIP TYPE  
  1L-3768 [1] RING-RETAINING  
2. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
3. 5P-8289 [2] BOLT-12 POINT HEAD  
4. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
  5P-1393 [2] STUD-TAPERLOCK  
   
    AVAILABLE REPAIR KIT(S):
  6E-0128 [1] KIT-SEAL  
 

#SEBP23660399
 

119-8769: PUMP GP-METERING

119-8769 PUMP GP-METERING
S/N 3CL1424-UP
PART OF 116-0974 LINES GP-STEERING
FIELD REPLACEMENT FOR @@@@@ 9T-6689@@@@@
AN ATTACHMENT
i00649868 SEBP2366
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

Information:

Caterpillar Parts SIS Catalog IT28F :

VALVE GP-SOLENOID
8T-8808 VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8351 VALVE GP-SOLENOID
VALVE GP-SELECTOR & PRESS CONT
6E-3078 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-RELIEF
6E-5950 VALVE GP-RELIEF
VALVE GP-RELIEF
482-4530 VALVE GP-RELIEF
VALVE GP-RELIEF
346-3797 VALVE GP-RELIEF
VALVE GP-RELIEF
186-0908 VALVE GP-RELIEF
VALVE GP-RELIEF
105-7715 VALVE GP-RELIEF
CYLINDER & MTG GP-STEERING
9C-5010 CYLINDER & MTG GP-STEERING
CYLINDER GP-STEERING
9T-6646 CYLINDER GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
PUMP & LINES GP-SEC STEERING
9C-8508 PUMP & LINES GP-SEC STEERING
PUMP & LINES GP-SEC STEERING
9C-8508 PUMP & LINES GP-SEC STEERING
PUMP GP-GEAR
9T-9803 PUMP GP-GEAR

Truck sale:

Caterpillar IT28F, Construction
24,500 USD 
Caterpillar IT28F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar IT28F, Construction
24,500 USD 
Caterpillar IT28F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar IT28F, Construction
23,000 
Caterpillar IT28F, Construction
- Wheel Loaders
FOLEY, INC.
Caterpillar IT28F, Construction
32,500 
Caterpillar IT28F, Construction
- Wheel Loaders
RING POWER CORP.
CATERPILLAR IT28F 1994
 
CATERPILLAR IT28F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FOLEY INC. (NEW JERSEY)
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.