AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1160973 LINES GP-STEERING- PART 1 OF 2 TYPE 3 IT28F INTEGRATED TOOLCARRIER


STEERING SYSTEM
LINES GP
PUMP GP
PUMP GP-METERING

INTEGRATED TOOLCARRIER IT28F INTEGRATED TOOLCARRIER 1JL
 IT28F INTEGRATED TOOLCARRIER 1JL00400-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2368 IT28F 1JL   (1992)

STEERING SYSTEM

LINES GP
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
 

#SEBP23680390
 

116-0973: LINES GP-STEERING

1160973 LINES GP-STEERING- PART 1 OF 2
TYPE 3
c589903 SEBP2368
1160973 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 8Y-7526 [1] PLUG AS  
  102-8803 [1] KIT-RECEPTACLE  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  5P-5677 BD WIRE (18 GA)  
  8T-8729 [3] PIN-CONNECTOR  
3. 6V-9168 [1] NUT (11/16-16 THD)  
4. 8R-2992 I [1] HOSE AS  
5. 8R-4846 I [1] HOSE AS  
6. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
7. 8X-5562 I [1] HOSE AS  
8. 8T-4121 [2] WASHER (2.5MM THK)  
9. 8T-7529 [4] CLIP  
10. 6V-9829 [1] CAP AS  
  6V-9355 [1] PLUG  
11. 6V-8397 [3] SEAL-O-RING (12.83MM OD)  
12. 4E-2556 [1] TUBE AS  
13. 2M-9780 [4] SEAL-O-RING (19.18MM ID)  
14. 6V-8626 [2] ELBOW-FACE SEAL  
15. 7X-0820 [1] TEE-UNION ORIFICE  
16. 6V-8776 [2] TEE-FACE SEAL  
17. 7J-9108 [6] SEAL-O-RING (19.28 MM OD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP23680391
 

116-0973: LINES GP-STEERING

1160973 LINES GP-STEERING- PART 2 OF 2
TYPE 3
1198769-PAGE 376.01
c721479 SEBP2368
1160973 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9994 [1] FILM-FACE  
2. 9R-8030 I [1] HOSE AS  
3. 9R-7852 I [1] HOSE AS  
4. 8T-4186 MC [1] BOLT (M10X1.50X40MM)  
5. 8T-4121 [3] WASHER (2.5MM THK)  
6. 4E-1021 I [1] HOSE AS  
7. 5P-5148 [1] STRAP-TIE (120.65MM DIA)  
8. 8T-1685 [1] TEE  
9. 6V-8943 [2] REDUCER AS  
10. 9T-8844 [1] VALVE-CHECK  
11. 6V-8397 [2] SEAL-O-RING (12.83MM OD)  
12. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
13. 6G-0237 [1] SEAL  
14. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
15. 2P-1293 [1] LOCKNUT-BULKHEAD (1 3/16-12 THD)  
16. 4J-0520 [1] SEAL-O-RING (32.92MM ID)  
17. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
18. 7J-9108 [7] SEAL-O-RING (19.28 MM OD)  
19. 7M-8485 [1] SEAL-O-RING (29.74MM ID)  
20. 6V-9746 [6] SEAL-O-RING (22.5MM OD)  
21. 8C-7563 [1] ELBOW  
22. 8T-2883 [1] TEE  
23. 6V-9160 [1] TEE-FACE SEAL  
24. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20 MM)  
25. 119-8769 YC [1] PUMP GP-METERING  
26. 8T-4133 M [1] NUT (M10X1.50 THD)  
27. 6V-9200 [2] ELBOW-FACE SEAL  
28. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
29. 4E-1019 [1] TUBE AS  
30. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30 MM)  
31. 6V-9832 B [1] CAP AS  
  6V-8556 [1] NUT (1-3/16-12 THD)  
32. 8Y-8109 [1] FLANGE  
33. 7G-3833 [2] CLIP (TAB)  
34. 7G-3834 [2] CLIP (SLOT)  
35. 8T-7529 C [1] CLIP  
36. 2N-8928 [1] CLIP  
37. 8C-3174 [2] GROMMET  
38. 6V-8632 [3] CONNECTOR-SEAL  
39. 8T-4223 [4] WASHER-HARD (3MM THK)  
40. 4S-1962 C [1] CLIP (25.4MM ID)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680392
 

116-0974: LINES GP-STEERING

1160974 LINES GP-STEERING
S/N 1JL203-250. 9T6689-PAGE 376
PART OF 1160975 & 1160977 STEERING-SUPPLEMENTAL
AN ATTACHMENT
c587850 SEBP2368
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER AS  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING (12.83MM OD)  
10. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
11. 2M-9780 [4] SEAL-O-RING (19.18MM ID)  
12. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
13. 3J-1907 [1] SEAL-O-RING (11.89MM ID)  
14. 4J-0520 [1] SEAL (32.92MM ID)  
15. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
16. 7J-9108 [12] SEAL-O-RING (15.60MM ID)  
17. 7M-8485 [1] SEAL-O-RING (29.74MM) ID  
18. 6V-9746 [6] SEAL-O-RING (19.79MM ID)  
19. 8C-7563 [1] ELBOW  
20. 112-4860 [1] TEE-O-RING  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE-UNION ORIFICE  
24. 6V-8626 [2] ELBOW-FACE SEAL  
25. 6V-9200 [2] ELBOW-FACE SEAL  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP AS  
    EACH INCLUDES
  6V-8556 [1] NUT (1-3/16-12 THD)  
28. 6V-0852 [1] CAP-DUST  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR-SEAL  
35. 6V-3965 [1] NIPPLE AS  
36. 2P-1293 [1] LOCKNUT-BULKHEAD (1 13/16-12THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (3MM THK)  
39. 8T-4121 [5] WASHER (21MM OD)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30 MM)  
41. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
43. 8T-4133 M [1] NUT (M10X1.50 THD)  
44. 6V-9168 [1] NUT (11/16-16 THD)  
45. 9T-6689 Y [1] PUMP GP-METERING  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20 MM)  
47. 6G-0237 [1] SEAL  
48. 5P-5148 [1] STRAP-TIE  
49. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
50. 8T-1685 [1] TEE  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680393
 

116-0974: LINES GP-STEERING

1160974 LINES GP-STEERING
S/N 1JL251-UP. TYPE 1
9T6689-PAGE 376
PART OF 1160975 & 1160977 STEERING ARS-SECONDARY
AN ATTACHMENT
c646899 SEBP2368
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER AS  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING (12.83MM OD)  
10. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
11. 2M-9780 [4] SEAL-O-RING (19.18MM ID)  
12. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
13. 5P-5148 [1] STRAP-TIE (120.65MM DIA)  
14. 4J-0520 [1] SEAL-O-RING (32.92MM ID)  
15. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
16. 7J-9108 [12] SEAL-O-RING (15.60MM ID)  
17. 7M-8485 [1] SEAL-O-RING ((29.74MM) ID)  
18. 6V-9746 [6] SEAL-O-RING (19.79MM ID)  
19. 8C-7563 [1] ELBOW  
20. 8T-2883 [1] TEE  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE-UNION ORIFICE  
24. 6V-8626 [2] ELBOW-90 DEGREE  
25. 6V-9200 [2] ELBOW-FACE SEAL  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP AS  
    EACH INCLUDES
  6V-8556 [1] NUT (1-3/16-12 THD)  
28. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR-SEAL  
35. 8T-1685 [1] TEE  
36. 2P-1293 [1] LOCKNUT-BULKHEAD (1 13/16-12THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (3MM THK)  
39. 8T-4121 [5] WASHER (21MM OD)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30 MM)  
41. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
43. 8T-4133 M [1] NUT (M10X1.50 THD)  
44. 6V-9168 [1] NUT (11/16-16 THD)  
45. 9T-6689 Y [1] PUMP GP-METERING  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20 MM)  
47. 6G-0237 [1] SEAL  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680394
 

116-0974: LINES GP-STEERING

1160974 LINES GP-STEERING
S/N 1JL251-UP. TYPE 2
1198789-PAGE 376.01
PART OF 1160975 & 1160977 STEERING ARS-SECONDARY
AN ATTACHMENT
c726024 SEBP2368
1160974 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1020 I [1] HOSE AS  
2. 9R-7852 I [1] HOSE AS  
3. 8R-2992 I [1] HOSE AS  
4. 8R-4846 I [1] HOSE AS  
5. 4E-1021 I [1] HOSE AS  
6. 8X-5562 I [1] HOSE AS  
7. 6V-8943 [1] REDUCER AS  
8. 9T-8844 [1] VALVE-CHECK  
9. 6V-8397 [5] SEAL-O-RING (12.83MM OD)  
10. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
11. 2M-9780 [4] SEAL-O-RING (19.18MM ID)  
12. 3K-0360 [4] SEAL-O-RING (16.36MM ID)  
13. 5P-5148 [1] STRAP-TIE (120.65MM DIA)  
14. 4J-0520 [1] SEAL-O-RING (32.92MM ID)  
15. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
16. 7J-9108 [12] SEAL-O-RING (15.60MM ID)  
17. 7M-8485 [1] SEAL-O-RING (29.74MM ID)  
18. 6V-9746 [6] SEAL-O-RING (19.79MM ID)  
19. 8C-7563 [1] ELBOW  
20. 8T-2883 [1] TEE  
21. 6V-9160 [1] TEE-FACE SEAL  
22. 6V-8776 [2] TEE-FACE SEAL  
23. 7X-0820 [1] TEE-UNION ORIFICE  
24. 6V-8626 [2] ELBOW-90 DEGREE  
25. 6V-9200 [2] ELBOW-FACE SEAL  
26. 4E-1019 [1] TUBE AS  
27. 6V-9832 [2] CAP AS  
    EACH INCLUDES
  6V-8556 [1] NUT (1-3/16-12 THD)  
28. 8T-4186 MC [1] BOLT (M10X1.50X25MM)  
29. 7G-3833 [2] CLIP (TAB)  
30. 7G-3834 [2] CLIP (SLOT)  
31. 8T-7529 [6] CLIP  
32. 2N-8928 [1] CLIP  
33. 8C-3174 [2] GROMMET  
34. 6V-8632 [3] CONNECTOR-SEAL  
35. 8T-1685 [1] TEE  
36. 2P-1293 [1] LOCKNUT-BULKHEAD (1 13/16-12THD)  
37. 8Y-8109 [1] FLANGE  
38. 8T-4223 [4] WASHER-HARD (3MM THK)  
39. 8T-4121 C [4] WASHER (21MM OD)  
40. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30 MM)  
41. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
43. 8T-4133 M [1] NUT (M10X1.50 THD)  
44. 6V-9168 [1] NUT (11/16-16 THD)  
45. 119-8769 YC [1] PUMP GP-METERING  
46. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20 MM)  
47. 6G-0237 [1] SEAL  
48. 7X-7729 C [1] WASHER (3MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680395
 

9T-9803: PUMP GP-GEAR

9T9803 PUMP GP-GEAR
PART OF 9C8508, 1160976 PUMP & LINES
AN ATTACHMENT
c531701 SEBP2368
9T9803 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4806 [1] SEAL-LIP TYPE  
  1L-3768 [1] RING-RETAINING  
2. 9S-4191 [1] PLUG-O-RING  
  3J-1907 [1] SEAL  
3. 5P-8289 [2] BOLT-12 POINT HEAD  
4. 1F-7958 [2] NUT-FULL  
  5P-1393 [2] STUD-TAPERLOCK  
   
    THE FOLLOW KIT
    IS AVAILABLE:
  6E-0128 [1] KIT-SEAL  
 

#SEBP23680396
 

116-0976: PUMP & LINES GP

1160976 PUMP & LINES GP
9T9803-PAGE 371.01, 1036317-PAGE 379
PART OF 1160977 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c678764 SEBP2368
1160976 PUMP & LINES GP Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [8] BOLT (M12X1.75X30MM)  
2. 8T-4223 [8] WASHER-HARD (3MM THK)  
3. 6V-0397 [2] FLANGE-HALF  
4. 9C-9452 I [1] HOSE AS  
5. 4J-0522 [2] SEAL-O-RING (37.69MM ID)  
6. 129-1903 [1] TUBE AS  
7. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
8. 6V-8943 [1] REDUCER AS  
9. 8T-4121 [6] WASHER (2.5MM THK)  
10. 6V-9807 [1] UNION  
11. 6Y-0908 [1] COUPLER-PUMP  
12. 3E-6429 [1] SWITCH AS-FLOW  
13. 9T-9803 Y [1] PUMP GP-GEAR  
14. 2P-1293 [1] LOCKNUT-BULKHEAD (1 13/16-12THD)  
15. 8T-4178 M [4] BOLT (M10X1.50X90MM)  
16. 103-6317 Y [1] VALVE GP-UNLOADING  
17. 4J-5267 [1] SEAL-O-RING (24.99MM ID)  
18. 4E-1018 [1] TUBE AS  
19. 8T-0788 [1] ELBOW-90 DEGREE  
20. 6V-8397 [3] SEAL-O-RING (9.27MM ID)  
21. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
22. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
23. 4E-1015 [1] TUBE AS  
24. 6V-8640 [1] CONNECTOR-SEAL  
25. 2M-9780 [2] SEAL-O-RING (19.18MM ID)  
26. 6V-9746 [6] SEAL-O-RING (18.94MM ID)  
27. 6V-8637 [1] CONNECTOR-SEAL  
28. 4E-1014 [1] TUBE AS  
29. 7M-8485 [1] SEAL-O-RING (29.74MM ID)  
30. 9R-1111 I [1] HOSE AS  
31. 6V-9160 [1] TEE-FACE SEAL  
32. 9R-9072 I [1] HOSE AS  
33. 7J-9108 [2] SEAL-O-RING (15.72MM ID)  
34. 7X-7794 [1] FILM-FACE  
35. 2N-7007 [1] GASKET  
36. 3E-6450 [1] SWITCH AS-PRESSURE  
37. 4P-7581 [3] CLIP (10.5MM ID)  
38. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
39. 7K-1181 [5] STRAP-CABLE (4.00IN DIA)  
40. 6V-9182 [1] ELBOW-FACE SEAL  
41. 9S-4190 [1] PLUG-O-RING (7/16-20 THD)  
42. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680397
 

9C-8508: PUMP & LINES GP

9C8508 PUMP & LINES GP-SUPPLEMENTAL STEERING
9T9803-PAGE 371.01, 1036317-PAGE 379
PART OF 1160975 STEERING AR-SUPPLEMENTAL
AN ATTACHMENT
c677882 SEBP2368
9C8508 PUMP & LINES GP Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [8] BOLT (M12X1.75X30MM)  
2. 8T-4223 [8] WASHER-HARD (3MM THK)  
3. 6V-0397 [2] FLANGE-HALF  
4. 9C-9452 I [1] HOSE AS  
5. 4J-0522 [2] SEAL-O-RING (37.69MM ID)  
6. 129-1903 [1] TUBE AS  
7. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
8. 6V-8943 [1] REDUCER AS  
9. 8T-4121 [6] WASHER (2.5MM THK)  
10. 3D-2824 [1] SEAL-O-RING (23.47MM ID)  
11. 6Y-0908 [1] COUPLER-PUMP  
12. 9S-4185 [1] PLUG-O-RING (3/4-16THD)  
13. 9T-9803 Y [1] PUMP GP-GEAR  
14. 2P-1293 [1] LOCKNUT-BULKHEAD (1 13/16-12THD)  
15. 8T-4178 M [4] BOLT (M10X1.50X90MM)  
16. 103-6317 Y [1] VALVE GP-UNLOADING  
17. 4J-5267 [1] SEAL-O-RING (24.99MM ID)  
18. 4E-1018 [1] TUBE AS  
19. 6V-9807 [1] UNION  
20. 6V-8397 [3] SEAL-O-RING (9.27MM ID)  
21. 8T-0788 [1] ELBOW-90 DEGREE  
22. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
23. 4E-1015 [1] TUBE AS  
24. 6V-8640 [1] CONNECTOR-SEAL  
25. 2M-9780 [2] SEAL-O-RING (19.18MM ID)  
26. 6V-9746 [6] SEAL-O-RING (18.94MM ID)  
27. 6V-8637 [1] CONNECTOR-SEAL  
28. 4E-1014 [1] TUBE AS  
29. 7M-8485 [1] SEAL-O-RING (29.74MM ID)  
30. 9R-1111 I [1] HOSE AS  
31. 6V-9160 [1] TEE-FACE SEAL  
32. 9R-9072 I [1] HOSE AS  
33. 7J-9108 [2] SEAL-O-RING (15.72MM ID)  
34. 9S-4191 [1] PLUG-O-RING (9/16-18THD)  
35. 2N-7007 [1] GASKET  
36. 3E-6450 [1] SWITCH AS-PRESSURE  
  3E-3370 [1] RECEPTACLE AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK  
  8T-8729 [3] PIN-CONNECTOR  
37. 4P-7581 [3] CLIP (10.5MM ID)  
38. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
39. 7K-1181 C [5] STRAP-CABLE (4.00IN DIA)  
40. 3E-9995 [1] FILM-FACE  
41. 6V-9182 [1] ELBOW-FACE SEAL  
42. 9S-4190 [1] PLUG-O-RING (7/16-20 THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23680398
 

9T-6689: PUMP GP-METERING

9T6689 PUMP GP-METERING
PART OF 1160973 & 1160974 LINES-STEERING
c552052 SEBP2368
9T6689 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 067-8615 [7] BOLT-12 POINT HEAD  
2. 105-9289 [1] SPACER  
3. 105-9288 [1] GEROTOR AS  
4. 9J-5686 [3] SEAL-O-RING  
5. 3G-6891 [2] RACE  
6. 5L-1100 [1] BEARING-THRUST  
7. 7J-8009 [1] PIN  
8. 8F-5340 [1] SEAL-LIP TYPE  
9. 9T-9010 [1] BUSHING  
10. 9J-5442 [1] RING  
11. 7F-8267 [1] SEAL-O-RING  
12. 7J-6839 [1] DRIVE-CONTROL END  
13. 3G-6905 [1] SPACER  
14. 3G-6889 [1] CAP  
15. 6S-7826 [1] RETAINER-BALL  
16. 6S-7827 [1] BALL  
17. 5F-9144 [1] SEAL-O-RING (7.65MM ID)  
18. 3G-6907 [1] SEAT  
19. 1H-1023 [1] SEAL-O-RING (9.38MM ID)  
20. 3G-6906 [1] SCREW  
21. 7R-4530 [1] O-RING  
22. 9T-7122 [1] SEAL  
23. 9T-7123 [1] RING  
24. 101-1702 [1] CONTROL AS  
  7J-8009 [1] PIN  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  101-1276 [1] KIT-SPRING  
  9T-8847 [1] KIT-SEAL  
 

#SEBP23680399
 

119-8769: PUMP GP-METERING

1198769 PUMP GP-METERING
PART OF 1160973, 1160974 LINES-STEERING
FIELD REPLACEMENT FOR 9T6689-PAGE 376
SEBP23680399 SEBP2368
  For full view, you need register

Parts for your IT28F INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    NO SERVICEABLE PARTS
   
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Transmission Neutralizer Switch Can Be Adjusted To Adapt To Different Operating Conditions {4274,3168,3418,4265}
1995/09/11
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21

Caterpillar Parts SIS Catalog IT28F :

LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
CYLINDER GP-STEERING
9T-6646 CYLINDER GP-STEERING
CYLINDER & MTG GP-STEERING
9C-5010 CYLINDER & MTG GP-STEERING
CONTROL GP-STEERING
116-0875 CONTROL GP-STEERING
CONTROL GP-STEERING
116-0819 CONTROL GP-STEERING
LINES GP-STEERING
116-0973 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
LINES GP-STEERING
116-0974 LINES GP-STEERING
PUMP GP-GEAR
9T-9803 PUMP GP-GEAR
PUMP & LINES GP
116-0976 PUMP & LINES GP
PUMP & LINES GP
9C-8508 PUMP & LINES GP
PUMP GP-METERING
9T-6689 PUMP GP-METERING

Truck sale:

Caterpillar IT28F, Construction
24,500 USD 
Caterpillar IT28F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar IT28F, Construction
24,500 USD 
Caterpillar IT28F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar IT28F, Construction
23,000 
Caterpillar IT28F, Construction
- Wheel Loaders
FOLEY, INC.
Caterpillar IT28F, Construction
32,500 
Caterpillar IT28F, Construction
- Wheel Loaders
RING POWER CORP.
CATERPILLAR IT28F 1994
 
CATERPILLAR IT28F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FOLEY INC. (NEW JERSEY)
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.