AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

107-7732 PUMP GP-FUEL INJECTION S/N 98Z18131-99999 PART OF 133-8829, 133-8830 ENGINE AR ALSO AN ATTACHMENT 938F


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
SEPARATOR GP-WATER
TANK GP-FUEL
VALVE GP-CHECK

WHEEL LOADER 938F WHEEL LOADER 7SN
 938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2374 938F 7SN   (1994)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
 

#SEBP23740130
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z18131-99999
PART OF 133-8829, 133-8830 ENGINE AR
ALSO AN ATTACHMENT
i00125702 SEBP2374
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8216 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING  
5. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23740131
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 7SN1-384
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
i00138120 SEBP2374
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
  7L-9061 [1] SEAL-O-RING  
  229-3218 [2] VALVE AS  
3. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 7E-5346 [1] VALVE AS  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 8N-0803 [1] BASE-FILTER  
 

#SEBP23740132
 

101-0618: PUMP GP-FUEL PRM & PRIM FILTER

101-0618 PUMP GP-FUEL PRM & PRIM FILTER
S/N 7SN1-384
PART OF 108-6571 INSTALLATION AR-ENGINE
i00192434 SEBP2374
1010618 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-6357 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  9R-2216 [2] BOSS  
2. 8N-5251 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
3. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
4. 7X-0507 [2] WASHER-HARD (12X22.5X5-MM THK)(21MM OD)  
5. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
6. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
7. 3T-7310 I [1] HOSE AS  
8. 6V-8397 [2] SEAL-O-RING  
9. 9X-2134 [1] ELBOW  
10. 2M-9780 [1] SEAL-O-RING  
11. 3K-0360 D [1] SEAL-O-RING  
12. 9S-4185 G [1] PLUG (3/4-16-THD)  
13. 3J-1907 [1] SEAL-O-RING  
14. 6V-8724 [1] ELBOW  
15. 3S-8664 [1] CLIP (LOOP)  
16. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
17. 8C-5748 M [1] BOLT (M8X1.25X55-MM)  
18. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  D   ORDER BY THE METER
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23740133
 

116-8663: PUMP GP-FUEL PRM & PRIM FILTER

116-8663 PUMP GP-FUEL PRM & PRIM FILTER
S/N 7SN385-99999
PART OF 134-4289 INSTALLATION AR-ENGINE
i00489620 SEBP2374
1168663 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-6357 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  9R-2216 [2] BOSS  
2. 127-6449 Y [1] PUMP GP-FUEL PRM & WATER SEP  
3. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
4. 7X-0507 [2] WASHER-HARD (12X22.5X5-MM THK)  
5. 9U-4931 I [1] HOSE AS  
6. 6V-8397 [2] SEAL-O-RING  
7. 7X-0901 [1] ELBOW  
8. 1J-9671 [1] SEAL-O-RING  
9. 5P-7814 [2] SEAL-O-RING  
10. 3K-8460 [2] PLUG (1/2-20-THD)  
11. 3J-1907 [1] SEAL-O-RING  
12. 6V-9001 [1] ELBOW  
13. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23740134
 

8N-5251: PUMP GP-FUEL PRM & PRIM FILTER

8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
S/N 7SN1-384
PART OF 101-0618 PUMP GP-FUEL PRM & PRIM FILTER
i00138121 SEBP2374
8N5251 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3365 Y [1] PUMP GP-FUEL PRIMING  
2. 8H-2807 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] SEAL-RING  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 7S-9323 [1] SPRING  
8. 2H-3429 [1] RING-RETAINING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23740135
 

127-6449: PUMP GP-FUEL PRM & WATER SEP

127-6449 PUMP GP-FUEL PRM & WATER SEP
S/N 7SN385-99999
PART OF 116-8663 PUMP GP-FUEL PRM & PRIM FILTER
i00517353 SEBP2374
1276449 PUMP GP-FUEL PRM & WATER SEP Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-4089 [1] ELEMENT-WATER SEPARATOR  
2. 118-1461 [1] BASE AS  
3. 118-8118 [1] RING-RETAINING  
4. 118-8119 [1] NUT  
5. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
6. 129-6259 [1] PUMP GP-FUEL PRIMING  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES SEALS,PLUGS,CAP,NUT & RING)
 

#SEBP23740136
 

122-2500: SEPARATOR GP-WATER

122-2500 SEPARATOR GP-WATER
S/N 7SN1-99999
AN ATTACHMENT
i00192607 SEBP2374
1222500 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [2] SEAL-O-RING  
2. 2Q-5988 [1] SEPARATOR GP-WATER  
3. 8T-5043 [2] ADAPTER  
4. 126-3143 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP23740137
 

103-5782: TANK GP-FUEL

103-5782 TANK GP-FUEL
S/N 7SN1-384
PART OF 101-8791 CHASSIS AR
i00192471 SEBP2374
1035782 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3210 M [5] BOLT (M6X1X16-MM)  
2. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
3. 106-3535 [1] SENDER AS-LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
4. 1U-8846 [1] SEALANT-GASKET  
5. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
  9X-8600 [1] SEAL-O-RING  
6. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
7. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
8. 1H-8306 [1] SCREW-PURGE (1/2-20X1.625-IN)  
9. 9S-9334 [1] PLUG  
10. 7M-8485 [1] SEAL-O-RING  
11. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
12. 105-6565 [1] TANK AS  
  3F-0566 [3] WASHER  
  7T-1099 [1] LINK  
  9X-2206 [1] ADAPTER AS-FUEL  
  M   METRIC PART
 

#SEBP23740138
 

134-6760: TANK GP-FUEL

134-6760 TANK GP-FUEL
S/N 7SN385-99999
PART OF 101-8791 CHASSIS AR
i00192636 SEBP2374
1346760 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3210 M [5] BOLT (M6X1X16-MM)  
2. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
3. 134-7262 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
4. 1U-8846 B SEALANT-GASKET  
5. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
  9X-8600 [1] SEAL-O-RING  
  5P-8502 [1] PADLOCK GP  
  9X-2206 [1] ADAPTER AS-FUEL  
6. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
7. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
8. 1H-8306 [1] SCREW-PURGE (1/2-20X1.625-IN)  
9. 9S-9334 [1] PLUG  
10. 7M-8485 [1] SEAL-O-RING  
11. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
  3F-0566 [3] WASHER  
12. 134-6759 [1] TANK AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23740139
 

129-1101: VALVE GP-CHECK

129-1101 VALVE GP-CHECK
S/N 98Z21181-99999
PART OF 129-1102 BASE GP-FUEL FILTER
ALSO AN ATTACHMENT
i00126203 SEBP2374
1291101 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6033 [1] SEAL-O-RING  
2. 6V-6923 [1] RING-BACKUP  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor & Fuel Transfer Pump
SUPPLEMENT FOR 3116 ENGINE FOR 938F WHEEL LOADER
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog 938F :

PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-FUEL RATIO CONTROL
107-7731 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL FILTER
6I-2420 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
141-9295 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
141-9295 LINES GP-FUEL FILTER
LINES GP-FUEL
122-0280 LINES GP-FUEL
GOVERNOR GP-UNIT INJECTOR
133-8658 GOVERNOR GP-UNIT INJECTOR
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
101-0618 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
116-8663 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & WATER SEP
127-6449 PUMP GP-FUEL PRM & WATER SEP
SEPARATOR GP-WATER
122-2500 SEPARATOR GP-WATER
TANK GP-FUEL
103-5782 TANK GP-FUEL
TANK GP-FUEL
134-6760 TANK GP-FUEL

Truck sale:

Caterpillar 938F, Construction
48,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
37,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
35,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
CATERPILLAR 938F 1995
 
CATERPILLAR 938F 1995
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 938F 1994
 
CATERPILLAR 938F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.