AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

123-5204 CONTROL GP-HYDRAULIC HAND -BACKHOE S/N 8RN1-4088 SIDESHIFT Type 1 AN ATTACHMENT 428C BACKHOE LOADER


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC

BACKHOE LOADER 428C BACKHOE LOADER 8RN
 428C Backhoe Loader 8RN00001-04088 (MACHINE) POWERED BY 3054 Engine SEBP2384 428C 8RN   (1995)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
104-1966 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
106-8498 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
123-5204 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
123-5204 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5005 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5005 CONTROL GP-HYDRAULIC HAND
 

#SEBP23840890
 

123-5204: CONTROL GP-HYDRAULIC HAND

123-5204 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 8RN1-4088
SIDESHIFT
Type 1
AN ATTACHMENT
i00514720 SEBP2384
1235204 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6431 [2] ROD END  
2. 8C-3392 [2] ROD END  
3. 8T-3984 [2] KNOB  
4. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [4] BALL JOINT  
6. 8T-4815 [8] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-2806 [8] PIN  
10. 9R-2807 [12] CLIP (RETAINER)  
11. 9R-8087 [1] LEVER AS  
12. 9R-9709 [1] BRACKET AS  
13. 9R-9720 [2] BRACKET AS  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 9R-9969 [2] BEARING  
18. 9R-9972 [1] LEVER AS  
19. 006-8606 [1] RING-RETAINING  
20. 104-9483 [1] PLATE  
21. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
22. 117-1051 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
23. 117-1052 [1] SHAFT AS  
24. 117-5672 [2] BOOT  
25. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [2] BUSHING  
  9R-3067 [1] PIN  
  9R-3135 [2] PIN  
26. 142-7404 [2] ROD  
27. 125-7724 [2] ROD AS  
28. 128-6154 [1] FILM-INSTRUCTION  
29. 8T-4133 M [14] NUT (M10X1.5-THD)  
30. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
31. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
32. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
33. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
34. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 108-2949 M [4] STUD (M10X1.5X270-MM)  
36. 136-7439 B [11] SPACER (20X40X3-MM THK)  
37. 136-7440 B [2] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23840891
 

123-5204: CONTROL GP-HYDRAULIC HAND

123-5204 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 8RN1-4088
SIDESHIFT
Type 2
AN ATTACHMENT
i00562905 SEBP2384
1235204 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6431 [2] ROD END  
2. 8C-3392 [2] ROD END  
3. 8T-3984 [2] KNOB  
4. 8T-4121 C [22] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [4] BALL JOINT  
6. 8T-4815 [8] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-2806 [8] PIN  
10. 9R-2807 [12] CLIP (RETAINER)  
11. 9R-8087 [1] LEVER AS  
12. 9R-9709 [1] BRACKET AS  
13. 9R-9720 [2] BRACKET AS  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-1968 C [6] SPACER (10.6X13.6X7-MM THK)  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 9R-9969 [2] BEARING  
18. 9R-9972 [1] LEVER AS  
19. 006-8606 [3] RING-RETAINING  
20. 104-9483 [1] PLATE  
21. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
22. 117-1051 [1] PLATE AS  
23. 117-1052 [1] SHAFT AS  
24. 117-5672 [2] BOOT  
25. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [2] BUSHING  
  9R-3067 [2] PIN  
26. 142-7404 [2] ROD  
27. 144-0899 C [2] ROD AS  
28. 128-6154 [1] FILM-INSTRUCTION  
29. 8T-4133 M [14] NUT (M10X1.5-THD)  
30. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
31. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
32. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
33. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
34. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 108-2949 M [4] STUD (M10X1.5X270-MM)  
36. 136-7439 BC [12] SPACER (20X40X3-MM THK)  
37. 136-7440 B [16] SHIM (1-MM THK)  
38. 6V-8932 CM [2] SETSCREW-SOCKET (M6X1X10-MM)  
39. 142-7405 C [2] COLLAR  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23840892
 

126-5005: CONTROL GP-HYDRAULIC HAND

126-5005 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 8RN1-4088
Type 1
AN ATTACHMENT
i00514656 SEBP2384
1265005 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7439 B [9] SPACER (20X40X3-MM THK)  
2. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4815 [2] ROD END  
4. 9R-2806 [2] PIN  
5. 9R-2807 [6] CLIP (RETAINER)  
6. 006-8606 [1] RING-RETAINING  
7. 117-1051 [1] PLATE AS  
8. 117-1052 [1] SHAFT AS  
  117-1051 [1] PLATE AS  
9. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [2] BUSHING  
  9R-3135 [2] PIN  
  [2] BOSS  
10. 118-5263 [2] PLATE  
11. 125-7724 [2] ROD AS  
12. 8T-4133 M [2] NUT (M10X1.5-THD)  
13. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
14. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
15. 128-6154 [1] FILM-INSTRUCTION  
16. 8T-6431 [2] ROD END  
17. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
18. 136-7440 B [2] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23840893
 

126-5005: CONTROL GP-HYDRAULIC HAND

126-5005 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 8RN1-4088
Type 2
AN ATTACHMENT
i00658583 SEBP2384
1265005 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8932 CM [2] SETSCREW-SOCKET (M6X1X10-MM)  
2. 8T-6431 [2] ROD END  
3. 9R-1968 C [6] SPACER (10.6X13.6X7-MM THK)  
4. 006-8606 [1] RING-RETAINING  
5. 117-1051 [1] PLATE AS  
6. 117-1052 [1] SHAFT AS  
  117-1051 [1] PLATE AS  
7. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [2] BUSHING  
  9R-3135 [2] PIN  
8. 128-6154 [1] FILM-INSTRUCTION  
9. 136-7440 B [8] SHIM (1-MM THK)  
10. 142-7404 C [2] ROD  
11. 142-7405 C [4] COLLAR  
12. 144-0899 C [2] ROD AS  
13. 8T-4196 CM [4] BOLT (M10X1.5X35-MM)  
14. 8T-4121 C [12] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 CM [6] NUT (M10X1.5-THD)  
16. 8T-4815 [2] ROD END  
17. 9R-2806 [2] PIN  
18. 9R-2807 [6] CLIP (RETAINER)  
19. 136-7439 BC [8] SPACER (20X40X3-MM THK)  
20. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23840894
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 8RN1-1628
PART OF 121-3863 CHASSIS AR
i00566050 SEBP2384
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
4. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
5. 5H-3193 [1] PIN-SPRING  
6. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4773 [1] BALL JOINT  
8. 8T-4815 [2] ROD END  
9. 8T-9501 [2] SCREW (10-16X0.75-IN)  
10. 8Y-7237 [1] SWITCH GP-ROCKER (NEUTRALIZER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 9M-7783 [1] SPACER (0.65X1.188X0.81-IN THK)  
12. 9R-1765 [1] COVER-TOP (TOP)  
13. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
14. 9R-1767 [1] BOOT  
15. 9R-2806 [1] PIN  
16. 9R-2807 [2] CLIP (RETAINER)  
17. 9R-3067 [1] PIN  
18. 9R-4917 [2] ROD-CONTROL  
19. 9R-8165 [4] BEARING  
20. 9R-9901 [4] FASTENER (CLIP)  
21. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
22. 9R-9946 [1] JOINT AS  
23. 9R-9950 [1] PIN  
24. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
25. 104-1970 [1] ROD AS  
26. 104-9488 [1] PLATE  
27. 107-5591 [1] NUT-JAM (3/4-16-THD)  
28. 110-8884 [1] PLATE  
29. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
30. 115-4343 [1] LEVER AS  
31. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
32. 8T-4133 M [10] NUT (M10X1.5-THD)  
33. 112-2912 [1] ROD AS  
  095-9230 [1] PIN-SPRING  
  114-8498 [1] SPRING (INNER)  
  114-8692 [1] CYLINDER  
34. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4766 [1] ROD END  
37. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
38. 140-6021 [1] PLATE  
39. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23840895
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 8RN1-4088
PART OF 121-3863, 143-1766 CHASSIS AR
i00729775 SEBP2384
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 BC [6] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 5H-3193 [1] PIN-SPRING  
4. 8T-4766 [1] ROD END  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [2] ROD END  
7. 8T-9501 [2] SCREW (10-16X0.75-IN)  
8. 9R-1765 [1] COVER-TOP (TOP)  
9. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
10. 9R-1767 [1] BOOT  
11. 9R-4917 [2] ROD-CONTROL  
12. 9R-8165 [4] BEARING  
13. 9R-9901 [4] FASTENER (CLIP)  
14. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
15. 9R-9946 [1] JOINT AS  
16. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
17. 104-1970 [1] ROD AS  
18. 104-9488 [1] PLATE  
19. 107-5591 [1] NUT-JAM (3/4-16-THD)  
20. 110-8884 [1] PLATE  
21. 115-4343 [1] LEVER AS  
22. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
23. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
24. 140-6021 [1] PLATE  
25. 145-4458 C [1] PIN  
26. 200-1790 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
27. 3S-2093 [1] STRAP-CABLE  
28. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
29. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [10] NUT (M10X1.5-THD)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
35. 9R-2806 [1] PIN  
36. 9R-2807 [2] CLIP (RETAINER)  
37. 9R-3067 [1] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23840896
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 8RN1-4088
PART OF 123-4203, 147-3101 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i00488141 SEBP2384
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP23840897
 

112-1838: CONTROL GP-HYDRAULIC PEDAL

112-1838 CONTROL GP-HYDRAULIC PEDAL -BACKHOE
S/N 8RN1-4088
PART OF 118-6369, 119-3641 HYDRAULIC AR
AN ATTACHMENT
i00555082 SEBP2384
1121838 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [2] SEAL-LIP TYPE  
2. 9R-2806 [2] PIN  
3. 9R-2807 [4] CLIP (RETAINER)  
4. 006-8606 [1] RING-RETAINING  
5. 109-0533 [1] SEAL  
6. 119-3439 [1] BRACKET AS  
7. 119-4167 [1] ROD  
8. 119-4168 [1] PLATE  
9. 121-0592 [1] PEDAL AS  
10. 128-9736 [1] SUPPORT AS  
  9R-2614 [2] BEARING  
11. 133-0599 [1] SHAFT AS  
12. 136-7439 B [2] SPACER (20X40X3-MM THK)  
13. 136-7440 B [3] SHIM (1-MM THK)  
14. 141-7206 [1] TUBE AS  
  5V-4410 [2] BUSHING  
15. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
16. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [7] NUT (M10X1.5-THD)  
18. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
19. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
20. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
21. 8T-4815 [2] ROD END  
22. 9R-3135 [1] PIN  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23840898
 

128-7343: CONTROL GP-HYDRAULIC PEDAL

128-7343 CONTROL GP-HYDRAULIC PEDAL -BACKHOE
S/N 8RN1-4088
PART OF 121-1188, 121-1189, 121-1192, 121-1193, 121-1196, 121-1197, 121-1201, 121-1202, 121-1203, 121-1204, 121-1205, 121-1206 BACKHOE AR-EXTENDABLE STICK, 121-1186, 121-1187, 121-1190, 121-1191, 121-1194, 121-1195, 121-1198, 121-1199, 121-1200 BACKHOE AR-STANDARD STICK, 135-7201 KIT-AUXILIARY LINES
Type 1
AN ATTACHMENT
i00521810 SEBP2384
1287343 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [2] NUT (M10X1.5-THD)  
6. 9R-3135 [2] PIN  
7. 9R-2807 [2] CLIP (RETAINER)  
8. 133-0598 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 106-6376 [1] PLATE  
12. 133-0600 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
  M   METRIC PART
 

#SEBP23840899
 

128-7343: CONTROL GP-HYDRAULIC PEDAL

128-7343 CONTROL GP-HYDRAULIC PEDAL -BACKHOE
S/N 8RN1-4088
PART OF 121-1188, 121-1189, 121-1192, 121-1193, 121-1196, 121-1197, 121-1201, 121-1202, 121-1203, 121-1204, 121-1205, 121-1206 BACKHOE AR-EXTENDABLE STICK, 121-1186, 121-1187, 121-1190, 121-1191, 121-1194, 121-1195, 121-1198, 121-1199, 121-1200 BACKHOE AR-STANDARD STICK, 135-7201 KIT-AUXILIARY LINES
Type 2
AN ATTACHMENT
i00953375 SEBP2384
1287343 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 C [1] BALL JOINT  
2. 8T-4815 C [1] ROD END  
3. 9R-2807 [1] CLIP (RETAINER)  
4. 109-0533 [1] SEAL  
5. 121-0593 [1] PEDAL AS  
6. 133-0598 [1] SHAFT AS  
7. 133-0600 [1] SUPPORT AS  
  9R-2614 [2] BEARING  
8. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
9. 160-0837 C [1] ROD  
10. 6V-7744 CM [1] LOCKNUT (M10X1.5-THD)  
11. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
12. 8T-4121 C [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 CM [4] NUT (M10X1.5-THD)  
14. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
15. 9R-2806 C [1] PIN  
16. 195-6550 [1] WASHER-WAVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 428C :

CONTROL GP-HYDRAULIC HAND
106-8498 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
104-1966 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-SIDE
104-3919 CONSOLE GP-SIDE
CONSOLE GP-REAR
104-3921 CONSOLE GP-REAR
CONSOLE GP-FRONT
104-6044 CONSOLE GP-FRONT
CONSOLE GP-FRONT
104-3923 CONSOLE GP-FRONT
CONDENSER & MTG GP-REFRIGERANT
144-2222 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
113-1825 CONDENSER & MTG GP-REFRIGERANT
CONTROL GP-HYDRAULIC HAND
123-5204 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5005 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5005 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
112-1838 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
128-7343 CONTROL GP-HYDRAULIC PEDAL

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.