114-0165 AXLE & MTG GP-REAR S/N 2CR4428-16211 PART OF 143-1785, 143-1786, 143-1787, 143-1788 DRIVE AR-BACKHOE LOADER AN ATTACHMENT 428C

114-0165: AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 2CR4428-16211
PART OF 143-1785, 143-1786, 143-1787, 143-1788 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT (FINAL DRIVE, AXLE)
2.	156-2857 CY	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

110-8632: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

110-8632 AXLE GP-DRIVE & STEERING -FRONT
S/N 2CR1-16211
RATIO 14.62
PART OF 112-9631 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-7035	[2]	GEAR
2.	130-3809	[1]	TIE ROD AS (RH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6880	[1]	BALL JOINT
	130-7043	[1]	JOINT
3.	130-3012	[1]	TIE ROD AS (LH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6881	[1]	BALL JOINT
	130-7043	[1]	JOINT
4.	178-7190 Y	[1]	CYLINDER GP-STEERING
5.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
6.	107-5608	[1]	GEAR SET-BEVEL
7.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
8.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
9.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
10.	243-5336 M	[4]	BOLT (M10X1.5X20-MM)
11.	119-7061	[2]	PLUG
12.	130-6878	[6]	RING
13.	169-4162	[6]	CONE-BEARING
14.	169-4161	[6]	CONE-BEARING
15.	169-4160	[6]	GEAR
16.	130-7027	[2]	CARRIER
17.	119-7042	[2]	SHAFT
18.	119-7040	[2]	GEAR-RING
19.	130-3007	[2]	NUT
20.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
21.	130-7047	[16]	STUD
22.	311-8193 M	[16]	BOLT (M10X1.5X45-MM)
23.	2S-0480	[4]	CUP-TAPERED ROLLER
24.	178-8608	[4]	CONE-TAPERED
25.	130-6879	[2]	SEAL
26.	9X-0640	[2]	SEAL-O-RING
27.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
28.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
29.	054-6589	[2]	CLIP
30.	119-7045	[2]	SEAL
31.	7X-5771	[2]	RING-RETAINING
32.	131-3816	[2]	RING
33.	119-7053	[2]	FLANGE
34.	5P-9439	[2]	BALL BEARING
35.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
36.	130-7026	[2]	PIN
37.	119-7038	[2]	PIN
38.	9X-0796	[4]	SEAL-O-RING
39.	119-7047	[2]	SEAL
40.	119-7046	[2]	SEAL
41.	031-0426	[2]	CUP-BEARING
42.	077-3918	[2]	BEARING
43.	119-7057	[1]	HOUSING (RH)
44.	130-7031	[1]	HOUSING (LH)
45.	9R-5246	[2]	BUSHING
46.	130-6877	[2]	SEAL
47.	130-2998	[2]	BUSHING
48.	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
	130-3850 B	[1]	SHIM (0.8-MM THK)
49.	130-6673	[1]	PLUG
50.	9R-3175	[1]	PLUG
51.	054-6526	[15]	DISC
52.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
53.	054-6847	[1]	SEAL-O-RING
54.	6V-2200	[2]	CUP-BEARING
55.	003-7501	[2]	CONE-BEARING
56.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
57.	119-7056	[1]	HOUSING (LH)
58.	119-7055	[1]	HOUSING (RH)
59.	130-6675	[1]	PIN
60.	082-3077	[4]	PIN
61.	130-3010	[4]	PIN
62.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
63.	119-7036	[1]	PIN
64.	9R-6994	[2]	WASHER-THRUST
65.	128-7855	[2]	GEAR-PINION
66.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
67.	008-1902	[3]	CONE-BEARING
68.	6S-3051	[3]	CUP-BEARING
69.	055-1986	[1]	SEAL-LIP TYPE
70.	130-7046	[1]	FLANGE
71.	130-7028	[1]	PLATE
72.	054-6480	[1]	DISC
73.	130-3005 M	[1]	NUT (M24X2-THD)
74.	130-7024	[1]	CASE
75.	130-7048 B	[2]	RING (13.5-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
76.	493-8891 B	[2]	RING (11-MM THK)
	493-8892 B	[2]	RING (11.1-MM THK)
	493-8893 B	[2]	RING (11.2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

114-0166: AXLE GP-REAR

AXLE GP-REAR

114-0166 AXLE GP-REAR
S/N 2CR1-4503
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
2.	9R-5219	[8]	BOLT-SPECIAL
3.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
4.	118-5839	[2]	SEAL-REAR AXLE
5.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
6.	115-2137	[1]	HOUSING AS (LH)
7.	115-2138	[1]	HOUSING AS
			(EACH INCLUDES)
8.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
9.	9R-2412	[2]	STUD
10.	8S-9151	[1]	CUP-BEARING
11.	9R-2414	[1]	GEAR (56-TEETH)
12.	9R-9406	[1]	HOUSING-REAR BRAKE
13.	9X-8880	[25]	BOLT (5/8-11X2-IN)
14.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
15.	153-3194	[2]	CARRIER AS
			(EACH INCLUDES)
16.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
17.	9R-2421	[3]	SHAFT
18.	9R-2419	[3]	KIT-BEARING
19.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
20.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
21.	153-3192	[3]	GEAR-PLANETARY (20 TEETH)
22.	9R-2420	[1]	RETAINER
23.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
24.	9R-2505	[1]	SEAL
25.	9R-2504	[1]	SHAFT
26.	9R-2506	[1]	FORK
27.	9R-2507 M	[1]	SCREW-SPECIAL
28.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
29.	9R-2495	[2]	SEAL
30.	3J-9196	[4]	NUT-JAM (1/2-20-THD)
31.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
32.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
33.	9R-2426	[2]	LOCK
34.	9R-2424	[2]	GEAR (16-TEETH)
35.	9R-9405	[1]	HOUSING-REAR BRAKE (RH)
36.	133-7234	[8]	DISC-FRICTION
37.	9R-9401	[8]	PLATE
38.	9R-2474	[2]	PIN
39.	055-1258	[1]	HOUSING-BRAKE (RH)
40.	055-1259	[1]	HOUSING-BRAKE
41.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
42.	2B-2006	[12]	BOLT (1/2-13X4.75-IN)
43.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
44.	8H-1607	[2]	SEAL-O-RING
45.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
46.	8M-8157	[4]	SEAL-O-RING
47.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
48.	9R-9410	[2]	SEAL-REAR BRAKE
49.	9R-9408	[2]	PISTON-REAR BRAKE
50.	9R-9409	[2]	SEAL-REAR BRAKE
51.	9R-0823	[1]	LEVER AS
52.	9R-0883	[1]	PIN
53.	9R-2493	[1]	RING
54.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
55.	9R-2482	[1]	COUPLING
56.	9R-2486	[1]	SPRING
57.	9R-2483	[1]	ADAPTER
58.	2S-0480	[1]	CUP-TAPERED ROLLER
59.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
60.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
61.	9R-2480	[1]	CASE AS
	9R-2485	[1]	BOLT (1/2-13X2.87-IN)
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2488	[1]	GEAR (16-TEETH)
65.	9R-2491	[1]	SPIDER
66.	9R-9403	[4]	PINION
67.	9R-2489	[4]	WASHER-SPRING
68.	9R-2487	[1]	GEAR (16-TEETH)
69.	118-9117	[1]	GEAR SET
70.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)(BEARING)
71.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
72.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
73.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2502	[1]	NUT (1-1/4-18-THD)
76.	9R-9404	[1]	BLOCK
77.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
78.	9R-6602	[2]	PLUG-MAGNETIC
79.	9R-2508	[1]	HOUSING
80.	3B-5302	[1]	PIN-COTTER
81.	9R-2494	[1]	RING
82.	7T-7621	[1]	BEARING AS
83.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
84.	9R-2512	[1]	SEAL
85.	9R-2407	[1]	RETAINER AS
86.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
87.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
88.	3B-4509	[6]	LOCKWASHER
89.	3K-3379	[6]	BOLT (9/16-12X1-IN)
90.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
91.	9R-2496	[1]	SEAL
92.	9R-2499	[1]	SEAL AS
93.	9R-2498	[1]	RETAINER
94.	113-1147	[1]	FLANGE
95.	9R-2497	[1]	SEAL
96.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

156-2857: AXLE GP-REAR

AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N 2CR4504-16211
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
1A.	9R-5219	[8]	BOLT-SPECIAL
2.	9R-2407	[1]	RETAINER AS
2A.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
2B.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
3.	156-1928	[1]	HOUSING AS (LH)
3A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
3B.	8S-9151	[1]	CUP-BEARING
3C.		[2]	STUD
3D.	156-1930	[1]	GEAR-RING (56-TEETH)
4.		[1]	HOUSING AS
4A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
4B.	8S-9151	[1]	CUP-BEARING
4C.		[2]	STUD
4D.	156-1930	[1]	GEAR-RING (56-TEETH)
5.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
5A.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
5B.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
5C.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
5D.	9R-2419	[3]	KIT-BEARING
5E.	9R-2420	[1]	RETAINER
5F.	9R-2421	[3]	SHAFT
5G.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
6.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
7.	9R-0883	[1]	PIN
8.	9R-0823	[1]	LEVER AS
9.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
10.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
11.	156-2572	[1]	HOUSING-REAR BRAKE (RH)
12.	9R-9410	[2]	SEAL-REAR BRAKE
13.	9R-9409	[2]	SEAL-REAR BRAKE
14.	9R-9408	[2]	PISTON-REAR BRAKE
15.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
16.	230-4017	[8]	DISC-BRAKE
17.	9R-2474	[2]	PIN
18.	9R-9401	[8]	PLATE
19.	8S-4740	[12]	BOLT (9/16-12X5-IN)
20.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
21.	8H-1607	[2]	SEAL-O-RING
22.	9R-2424	[2]	GEAR (16-TEETH)
23.	8M-8157	[4]	SEAL-O-RING
24.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
25.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
26.	9X-8880	[25]	BOLT (5/8-11X2-IN)
27.	9R-2508	[1]	HOUSING
28.	113-1147	[1]	FLANGE
29.	9R-2497	[1]	SEAL
30.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
31.	9R-2502	[1]	NUT (1-1/4-18-THD)
32.	3B-5302	[1]	PIN-COTTER
33.	9R-2498	[1]	RETAINER
34.	3B-4509	[6]	LOCKWASHER
35.	3K-3379	[6]	BOLT (9/16-12X1-IN)
36.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
37.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
38.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
39.	9R-2499	[1]	SEAL AS
40.	9R-2496	[1]	SEAL
41.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
42.	118-5839	[2]	SEAL-REAR AXLE
43.	9R-2512	[1]	SEAL
44.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
45.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
46.	9R-2505	[1]	SEAL
47.	9R-2504	[1]	SHAFT
48.	9R-2507 M	[1]	SCREW-SPECIAL
49.	7T-7621	[1]	BEARING AS
50.	9R-2494	[1]	RING
51.	9R-2480	[1]	CASE AS
52.	2S-0480	[1]	CUP-TAPERED ROLLER
53.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
54.	9R-2506	[1]	FORK
55.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
56.	9R-2493	[1]	RING
57.	9R-2488	[1]	GEAR (16-TEETH)
58.	9R-2482	[1]	COUPLING
59.	282-9821	[1]	HOUSING-BRAKE (LH)
60.	9R-2486	[1]	SPRING
61.	9R-2483	[1]	ADAPTER
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2491	[1]	SPIDER
65.	9R-9403	[4]	PINION
66.	9R-2489	[4]	WASHER-SPRING
67.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
68.	9R-2495	[2]	SEAL
69.	118-9117	[1]	GEAR SET
70.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
71.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
72.	9R-2503	[1]	BLOCK
73.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2487	[1]	GEAR (16-TEETH)
76.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
77.	9R-6602	[2]	PLUG-MAGNETIC
78.	5P-0540	[4]	NUT-HEX FULL (9/16-18-THD)
79.	282-9822	[1]	HOUSING-BRAKE (RH)
80.	156-1933	[1]	HOUSING-REAR BRAKE (LH)
81.	9R-2426	[2]	LOCK
82.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
	B		USE AS REQUIRED
	M		METRIC PART

8Y-7481: CONTROL GP-DIFFERENTIAL LOCK

CONTROL GP-DIFFERENTIAL LOCK

8Y-7481 CONTROL GP-DIFFERENTIAL LOCK
S/N 2CR1-16211
PART OF 143-2915, 8Y-7476 POWER TRAIN AR

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5567	[1]	PLATE AS
2.	8T-4244 M	[1]	NUT (M12X1.75-THD)
3.	5P-0372	[2]	LOCK PIN
4.	8B-1419	[1]	PIN-CLEVIS
5.	191-9113	[1]	ROD AS
6.	103-4867	[1]	SPRING
7.	8T-4815	[2]	ROD END
8.	8T-4133 M	[1]	NUT (M10X1.5-THD)
9.	9R-3051	[1]	ROD
10.	9R-2806	[1]	PIN
11.	9R-2807	[1]	CLIP (RETAINER)
12.	9R-1581	[1]	BOOT
13.	8C-4987	[1]	PIN-CLEVIS
	M		METRIC PART

111-7907: DRIVE GP-FLEXIBLE COUPLING

DRIVE GP-FLEXIBLE COUPLING

111-7907 DRIVE GP-FLEXIBLE COUPLING
S/N 2CR1-16211
PART OF 107-3761, 107-3762 TRANSMISSION AR-DIRECT DRIVE, 142-4436, 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4200 M	[8]	BOLT (M8X1.25X16-MM)
2.	6V-8455 M	[6]	BOLT (M10X1.5X16-MM)
3.	117-9713	[1]	PLATE-CONVERTER REINFORCEMENT
4.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
5.	111-7906	[1]	PLATE-CONVERTER DRIVE
	M		METRIC PART

136-3110: FILLER GP-POWER TRAIN OIL

FILLER GP-POWER TRAIN OIL

136-3110 FILLER GP-POWER TRAIN OIL -2-WHEEL DRIVE
S/N 2CR1-16211
PART OF 119-8186, 120-9573 DRIVE AR-BACKHOE LOADER, 140-6156 POWER TRAIN AR
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4J-0522	[2]	SEAL-O-RING
2.	5P-7854	[2]	CLIP (LOOP)
3.	7C-8246	[1]	SPACER (10.5X20X24-MM THK)
4.	104-8566	[1]	GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION)
5.	112-6219	[1]	BRACKET AS
6.	146-1816	[1]	BRACKET AS
7.	125-0851	[1]	TUBE AS
8.	136-3112	[1]	SPACER
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4133 M	[1]	NUT (M10X1.5-THD)
11.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
12.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
13.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4194 M	[2]	BOLT (M12X1.75X50-MM)
15.	148-1899 M	[1]	BOLT-CARRIAGE (M10X1.5X60-MM)(M10X1.50X60MM)
16.	3J-1907	[2]	SEAL-O-RING
17.	6V-0852	[2]	CAP-DUST
18.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
19.	150-3065	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ELBOW
	M		METRIC PART

138-7381: FILLER GP-POWER TRAIN OIL

FILLER GP-POWER TRAIN OIL

138-7381 FILLER GP-POWER TRAIN OIL -POWER SHIFT
S/N 2CR4428-16211
PART OF 140-6158 POWER TRAIN AR, 140-6159 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907	[2]	SEAL-O-RING
2.	4J-0522	[1]	SEAL-O-RING
3.	6V-0852	[2]	CAP-DUST
4.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
5.	7C-8246	[1]	SPACER (10.5X20X24-MM THK)
6.	112-6219	[1]	BRACKET AS
7.	138-7378	[1]	GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION)
8.	138-7380	[1]	TUBE AS
9.	146-1816	[1]	BRACKET AS
10.	148-1899 M	[1]	BOLT-CARRIAGE (M10X1.5X60-MM)
11.	5P-7854	[2]	CLIP (LOOP)
12.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4133 M	[1]	NUT (M10X1.5-THD)
14.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
15.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
16.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
	M		METRIC PART

8Y-7483: FILLER GP-POWER TRAIN OIL

FILLER GP-POWER TRAIN OIL

8Y-7483 FILLER GP-POWER TRAIN OIL -ALL WHEEL DRIVE
S/N 2CR1-16211
PART OF 119-8188, 119-8189 DRIVE AR-BACKHOE LOADER, 140-6157, 8Y-7476 POWER TRAIN AR
ALSO AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907	[2]	SEAL-O-RING
2.	6V-0852	[2]	CAP-DUST
3.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
4.	7C-8246	[1]	SPACER (10.5X20X24-MM THK)
5.	104-8566	[1]	GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION)
6.	112-6219	[1]	BRACKET AS
7.	125-0851	[1]	TUBE AS
8.	146-1816	[1]	BRACKET AS
9.	148-1899 M	[1]	BOLT-CARRIAGE (M10X1.5X60-MM)
10.	150-3065	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ELBOW
11.	4J-0522	[1]	SEAL-O-RING
12.	5P-7854	[2]	CLIP (LOOP)
13.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4133 M	[1]	NUT (M10X1.5-THD)
15.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
16.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
17.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
	M		METRIC PART

152-8308: FILTER GP-OIL

FILTER GP-OIL

152-8308 FILTER GP-OIL
S/N 2CR1-16211
PART OF 143-1799, 8Y-7467 HYDRAULIC AR
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	126-1817	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)

Information:

POWER TRAIN

AXLE GP

Operation and Maintenance Manual

Axle Universal Joint (Front) - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Service Letter-NACD

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS

Brake Piston Seal Available To Reduce Brake Drag
Brake Piston Seal Available To Reduce Brake Drag

Service Brake Wear on Backhoe Loaders
Service Brake Wear on Backhoe Loaders

Specifications

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Service Letter-China

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Service Letter-Asia

Systems Operation

Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Differential Lock
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Differential (Standard)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Letter-APD

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Testing and Adjusting

Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Brake System Air - Purge
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Disassembly and Assembly

Axle Group (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Pinion Assembly (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive Planetary Carrier Hub
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Brakes (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Front)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Tie Rod
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Drive Pinion
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

Serviceable Parts for 4 Wheel Drive Front Axle Steering Cylinder{4303}
1997/08/11

Additional Serviceable Parts Available For Front Axle {3020}
1999/05/10

Correct Identification of the Bearing Cones for the 154-5471 Drive and Steering Axle for C-Series Machines {3020, 3278}
2000/02/14

Service Parts for the Front AWD Axle Are Now Available {3020, 3260, 3278, 4303}
2000/02/14

New Maintenance Interval for Checking the Oil Level of the Axle Oscillation Bearing {3020, 3250, 7551}
2000/02/21

Brake Oil Additive Reduces Noise in the Axle {3020, 3250}
2000/11/06

Correction to the Disassembly and Assembly, SENR1206 for the Differential {3258}
2000/12/25

Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
2001/06/11

A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
2005/01/24

Oil Change Interval for the Rear Axle {3260}
2002/05/20

A New Brake Disc for the Rear Axle Improves Service Life {3278, 3282}
2003/04/14

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Correction to Axle Housing (Front) (All Wheel Drive) {3260}
2005/05/16

Empty Compartment Brake Purging Procedure {3278, 3282, 4269, 4291}
2006/03/27

New Brake Housings for the Rear Axle Are Available {3278, 3282}
2008/06/23

A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}

Caterpillar Parts SIS Catalog 428C :

Truck sale:

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

$25,882 USD

CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -

CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -

CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -