AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

114-0165 AXLE & MTG GP-REAR S/N 2DR1050-2716 PART OF 143-1786, 143-1787 DRIVE AR-BACKHOE LOADER AN ATTACHMENT 438C


POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP
POWER TRAIN
WHEEL GP
CONTROL GP-DIFFERENTIAL LOCK
DRIVE GP
FILLER GP-POWER TRAIN OIL

BACKHOE LOADER 438C BACKHOE LOADER 1TR
 438C Backhoe Loader Side Shift, Parallel Lift 1TR00001-01283 (MACHINE) POWERED BY 3054 Engine SEBP2387 438C 1TR   (1996)

POWER TRAIN

AXLE GP
AXLE & MTG GP-DRIVE & STEERING
119-8191 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
AXLE GP-DRIVE & STEERING
110-8632 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING
AXLE GP-REAR
114-0166 AXLE GP-REAR
 

#SEBP23870220
 

114-0165: AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 2DR1050-2716
PART OF 143-1786, 143-1787 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00784958 SEBP2387
1140165 AXLE & MTG GP-REAR Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VALVE AS-VENT (FINAL DRIVE, AXLE)  
2. 156-2857 CY [1] AXLE GP-REAR  
3. 7X-2570 M [8] BOLT (M20X2.5X220-MM)  
4. 8T-4131 M [8] NUT (M20X2.5-THD)  
5. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23870221
 

110-8632: AXLE GP-DRIVE & STEERING

110-8632 AXLE GP-DRIVE & STEERING -FRONT
S/N 1TR1-1283; 2DR1-2716
RATIO 14.62
PART OF 112-9631 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i00473087 SEBP2387
1108632 AXLE GP-DRIVE & STEERING Parts scheme 1108632 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-7035 [2] GEAR  
2. 130-3809 [1] TIE ROD AS (RH)  
  130-5010 M [1] LOCKNUT (M22X1.5-THD)  
  130-6674 [1] CLAMP  
  130-6880 [1] BALL JOINT  
  130-7043 [1] JOINT  
3. 130-3012 [1] TIE ROD AS (LH)  
  130-5010 M [1] LOCKNUT (M22X1.5-THD)  
  130-6674 [1] CLAMP  
  130-6881 [1] BALL JOINT  
  130-7043 [1] JOINT  
4. 178-7190 Y [1] CYLINDER GP-STEERING  
5. 130-7008 B [2] SHIM (0.2-MM THK)  
  130-7009 B [2] SHIM (0.3-MM THK)  
  130-7010 B [2] SHIM (0.4-MM THK)  
  130-7011 B [2] SHIM (0.6-MM THK)  
  130-7012 B [2] SHIM (0.8-MM THK)  
  130-7013 B [2] SHIM (1-MM THK)  
  130-7015 B [2] SHIM (1.6-MM THK)  
  130-7017 B [2] SHIM (2-MM THK)  
6. 107-5608 [1] GEAR SET-BEVEL  
7. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
8. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
9. 130-6689 B [1] RING (15.1-MM THK)  
  130-6690 B [1] RING (15.2-MM THK)  
  130-6691 B [1] RING (15.26-MM THK)  
  130-6693 B [1] RING (15.3-MM THK)  
  130-6694 B [1] RING (15.33-MM THK)  
  130-6695 B [1] RING (15.36-MM THK)  
  130-6696 B [1] RING (15.38-MM THK)  
  130-6697 B [1] RING (15.4-MM THK)  
  130-6698 B [1] RING (15.43-MM THK)  
  130-6699 B [1] RING (15.46-MM THK)  
  130-6701 B [1] RING (15.48-MM THK)  
  130-6702 B [1] RING (15.5-MM THK)  
  130-6703 B [1] RING (15.53-MM THK)  
  130-6704 B [1] RING (15.56-MM THK)  
  130-6705 B [1] RING (15.58-MM THK)  
  130-6706 B [1] RING (15.6-MM THK)  
  130-6707 B [1] RING (15.63-MM THK)  
  130-6708 B [1] RING (15.66-MM THK)  
  130-6709 B [1] RING (15.68-MM THK)  
  130-6710 B [1] RING (15.7-MM THK)  
  130-6711 B [1] RING (15.73-MM THK)  
  130-6712 B [1] RING (15.8-MM THK)  
  130-6713 B [1] RING (15.83-MM THK)  
  130-6714 B [1] RING (15.86-MM THK)  
  130-6715 B [1] RING (15.9-MM THK)  
  130-6716 B [1] RING (15.93-MM THK)  
  130-6718 B [1] RING (15.96-MM THK)  
  130-6719 B [1] RING (16-MM THK)  
  130-6720 B [1] RING (16.03-MM THK)  
  130-6721 B [1] RING (16.06-MM THK)  
  130-6722 B [1] RING (16.1-MM THK)  
  130-6724 B [1] RING (16.13-MM THK)  
  130-6725 B [1] RING (16.16-MM THK)  
  130-6726 B [1] RING (16.2-MM THK)  
  130-6727 B [1] RING (16.23-MM)  
  130-6728 B [1] RING (16.26-MM THK)  
  130-6729 B [1] RING (16.3-MM THK)  
  130-6731 B [1] RING (16.4-MM THK)  
  130-6732 B [1] RING (16.76-MM THK)  
10. 243-5336 M [4] BOLT (M10X1.5X20-MM)  
11. 119-7061 [2] PLUG  
12. 130-6878 [6] RING  
13. 169-4162 [6] CONE-BEARING  
14. 169-4161 [6] CONE-BEARING  
15. 169-4160 [6] GEAR  
16. 130-7027 [2] CARRIER  
17. 119-7042 [2] SHAFT  
18. 119-7040 [2] GEAR-RING  
19. 130-3007 [2] NUT  
20. 119-7060 M [2] SCREW-STOP (M14X1.5X50-MM)  
21. 130-7047 [16] STUD  
22. 311-8193 M [16] BOLT (M10X1.5X45-MM)  
23. 2S-0480 [4] CUP-TAPERED ROLLER  
24. 178-8608 [4] CONE-TAPERED  
25. 130-6879 [2] SEAL  
26. 9X-0640 [2] SEAL-O-RING  
27. 130-3014 Y [1] SHAFT GP-DRIVE (LH)  
28. 130-3013 Y [1] SHAFT GP-DRIVE (RH)  
29. 054-6589 [2] CLIP  
30. 119-7045 [2] SEAL  
31. 7X-5771 [2] RING-RETAINING  
32. 131-3816 [2] RING  
33. 119-7053 [2] FLANGE  
34. 5P-9439 [2] BALL BEARING  
35. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
36. 130-7026 [2] PIN  
37. 119-7038 [2] PIN  
38. 9X-0796 [4] SEAL-O-RING  
39. 119-7047 [2] SEAL  
40. 119-7046 [2] SEAL  
41. 031-0426 [2] CUP-BEARING  
42. 077-3918 [2] BEARING  
43. 119-7057 [1] HOUSING (RH)  
44. 130-7031 [1] HOUSING (LH)  
45. 9R-5246 [2] BUSHING  
46. 130-6877 [2] SEAL  
47. 130-2998 [2] BUSHING  
48. 054-6459 B [1] SHIM (1-MM THK)  
  054-6460 B [1] SHIM (1.05-MM THK)  
  054-6461 B [1] SHIM (1.1-MM THK)  
  054-6462 B [1] SHIM (1.15-MM THK)  
  054-6463 B [1] SHIM (1.2-MM THK)  
  054-6464 B [1] SHIM (1.25-MM THK)  
  054-6465 B [1] SHIM (1.3-MM THK)  
  054-6466 B [1] SHIM (1.35-MM THK)  
  054-6467 B [1] SHIM (1.4-MM THK)  
  054-6468 B [1] SHIM (1.45-MM THK)  
  054-6469 B [1] SHIM (1.5-MM THK)  
  054-6470 B [1] SHIM (1.55-MM THK)  
  054-6471 B [1] SHIM (1.6-MM THK)  
  054-6472 B [1] SHIM (0.95-MM THK)  
  054-6473 B [1] SHIM (0.9-MM THK)  
  054-6474 B [1] SHIM (0.65-MM THK)  
  054-6475 B [1] SHIM (0.7-MM THK)  
  054-6476 B [1] SHIM (0.75-MM THK)  
  054-6477 B [1] SHIM (0.85-MM THK)  
  130-3850 B [1] SHIM (0.8-MM THK)  
49. 130-6673 [1] PLUG  
50. 9R-3175 [1] PLUG  
51. 054-6526 [15] DISC  
52. 6V-3303 M [15] BOLT (M16X2X60-MM)  
53. 054-6847 [1] SEAL-O-RING  
54. 6V-2200 [2] CUP-BEARING  
55. 003-7501 [2] CONE-BEARING  
56. 130-6798 B [2] SHIM (1-MM THK)  
  130-6799 B [2] WASHER (1.05-MM THK)  
  130-6800 B [2] SHIM (1.1-MM THK)  
  130-6801 B [2] WASHER (62.2X75X1.15-MM THK)  
  130-6802 B [2] WASHER (62.2X75X1.2-MM THK)  
  130-6803 B [2] WASHER (62.2X75X1.25-MM THK)  
  130-6804 B [2] SHIM (1.3-MM THK)  
  130-6805 B [2] SHIM (1.35-MM THK)  
  130-6806 B [2] SHIM (1.4-MM THK)  
  130-6807 B [2] WASHER (1.45-MM THK)  
  130-6808 B [2] SHIM (1.5-MM THK)  
  130-6809 B [2] SHIM (1.55-MM THK)  
  130-6810 B [2] SHIM (1.6-MM THK)  
  130-6811 B [2] SHIM (1.65-MM THK)  
  130-6812 B [2] SHIM (1.7-MM THK)  
  130-6813 B [2] SHIM (1.75-MM THK)  
  130-6814 B [2] SHIM (1.8-MM THK)  
  130-6815 B [2] SHIM (1.85-MM THK)  
  130-6816 B [2] SHIM (1.9-MM THK)  
  130-6817 B [2] WASHER (62.2X75X1.95-MM THK)  
  130-6818 B [2] WASHER (62.2X75X2-MM THK)  
  130-6819 B [2] WASHER (62.2X75X2.05-MM THK)  
  130-6820 B [2] SHIM (2.1-MM THK)  
57. 119-7056 [1] HOUSING (LH)  
58. 119-7055 [1] HOUSING (RH)  
59. 130-6675 [1] PIN  
60. 082-3077 [4] PIN  
61. 130-3010 [4] PIN  
62. 105-3484 M [12] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
63. 119-7036 [1] PIN  
64. 9R-6994 [2] WASHER-THRUST  
65. 128-7855 [2] GEAR-PINION  
66. 130-3000 M [2] WASHER (53.2X71.9X1.9-MM THK)  
67. 008-1902 [3] CONE-BEARING  
68. 6S-3051 [3] CUP-BEARING  
69. 055-1986 [1] SEAL-LIP TYPE  
70. 130-7046 [1] FLANGE  
71. 130-7028 [1] PLATE  
72. 054-6480 [1] DISC  
73. 130-3005 M [1] NUT (M24X2-THD)  
74. 130-7024 [1] CASE  
75. 130-7048 B [2] RING (13.5-MM THK)  
  130-7049 B [2] RING (13.6-MM THK)  
  130-7050 B [2] RING (13.7-MM THK)  
76. 493-8891 B [2] RING (11-MM THK)  
  493-8892 B [2] RING (11.1-MM THK)  
  493-8893 B [2] RING (11.2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23870222
 

119-8190: AXLE GP-DRIVE & STEERING

119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N 1TR1-1283
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i00522471 SEBP2387
1198190 AXLE GP-DRIVE & STEERING Parts scheme 1198190 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-2462 [10] SPRING  
2. 8U-3591 [10] SPACER (6.5X15X7-MM THK)  
3. 7X-2619 M [10] BOLT (M6X1X10-MM)  
4. 110-0878 [10] PIN  
5. 110-4748 [16] NUT  
6. 009-3819 [1] CONE-BEARING  
7. 110-0880 [2] CARRIER-DISC  
8. 110-4752 B [4] SHIM  
9. 110-0876 [6] SCREW  
10. 1G-6735 [8] PIN-GROOVED  
11. 110-0877 [6] PIN  
12. 110-4736 [6] RING  
13. 110-0870 [10] PLATE  
14. 110-0842 [8] DISC-FRICTION  
15. 110-4757 [2] RING  
16. 110-4755 [2] RING  
17. 110-4756 [2] RING  
18. 110-4758 [2] RING  
19. 2D-9191 [1] CONE-BEARING  
20. 110-0158 B [1] RING (16-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
  225-5014 B [1] RING (16.56-MM THK)  
  225-5015 B [1] RING (16.62-MM THK)  
  225-5016 B [1] RING (16.64-MM THK)  
  225-5017 B [1] RING (16.68-MM THK)  
  225-5018 B [1] RING (16.72-MM THK)  
  225-5024 B [1] RING (16.84-MM THK)  
  225-5025 B [1] RING (16.88-MM THK)  
  225-5026 B [1] RING (16.9-MM THK)  
  225-5027 B [1] RING (16.94-MM THK)  
  225-5019 B [1] RING (16.74-MM THK)  
  225-5020 B [1] RING (16.76-MM THK)  
  225-5021 B [1] RING (16.76-MM THK)  
  225-5022 B [1] RING (16.78-MM THK)  
  225-5023 B [1] RING (16.82-MM THK)  
21. 110-0159 B [2] WASHER-THRUST (3-MM THK)  
  110-0160 B [2] WASHER-THRUST (2.7-MM THK)  
  110-0161 B [2] WASHER-THRUST (2.5-MM THK)  
  110-0162 B [2] WASHER-THRUST (2.2-MM THK)  
  110-0163 B [2] WASHER-THRUST (2-MM THK)  
  110-0164 B [2] WASHER-THRUST (1.7-MM THK)  
  110-0165 B [2] WASHER-THRUST (1.5-MM THK)  
22. 5W-5547 B [1] DISC (1-MM THK)  
  5W-5548 B [1] DISC (1.1-MM THK)  
  5W-5549 B [1] DISC (1.2-MM THK)  
  5W-5550 B [1] DISC (1.3-MM THK)  
  5W-5551 B [1] DISC (1.4-MM THK)  
  5W-5552 B [1] DISC (1.5-MM THK)  
  5W-5553 B [1] DISC (1.6-MM THK)  
  5W-5554 B [1] DISC (1.7-MM THK)  
  5W-5555 B [1] DISC (1.05-MM THK)  
  5W-5556 B [1] DISC (1.15-MM THK)  
  5W-5557 B [1] DISC (1.25-M THK)  
  5W-5558 B [1] DISC (1.35-MM THK)  
  5W-5559 B [1] DISC (1.45-MM THK)  
  5W-5560 B [1] DISC (1.55-MM THK)  
  5W-5561 B [1] DISC (1.65-MM THK)  
  5W-5562 B [1] DISC (1.75-MM THK)  
  5W-6400 B [1] DISC (1.8-MM THK)  
  8U-2752 B [1] DISC (0.7-MM THK)  
  8U-2753 B [1] DISC (0.8-MM THK)  
  8U-2754 B [1] DISC (0.9-MM THK)  
23. 110-2461 M [8] BOLT (M16X1.5X100-MM)  
24. 110-2457 [4] PIN-SPRING  
25. 110-2458 [4] PIN-SPRING  
26. 110-2467 [1] SHAFT-DIFFERENTIAL  
27. 213-9783 [6] BEARING-ROLLER  
28. 248-1017 [4] WASHER-THRUST  
29. 110-0855 [2] GEAR-AXLE BEVEL  
30. 110-0852 [2] DISC-PRESSURE  
31. 110-0854 [8] DISC-FRICTION  
32. 110-0853 [10] PLATE  
33. 253-9741 [1] CASE-DIFFERENTIAL  
34. 190-8591 [12] WASHER (64.5X72.1X2-MM THK)  
35. 213-9759 [4] GEAR-BEVEL  
36. 193-1132 [6] GEAR-PLANETARY  
37. 190-8590 [12] RING-SNAP  
38. 110-0867 [1] HOUSING-AXLE DRIVE  
39. 110-0883 [2] HOUSING-BRAKE  
40. 190-8567 B [1] SHIM (1-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  193-1125 B [1] SHIM (0.1-MM THK)(0.1MM THK)  
  193-1127 B [1] SHIM (0.15-MM THK)  
  193-1128 B [1] WASHER (0.1-MM THK)  
  193-1129 B [1] WASHER (0.15-MM THK)  
  193-1130 B [1] WASHER (0.5-MM THK)  
41. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
42. 110-4746 [1] SEAL  
43. 110-0856 [1] CAP-PROTECTION  
44. 113-5988 [1] FLANGE  
45. 110-4791 [1] HOUSING-AXLE  
46. 110-4749 [2] PLUG  
47. 110-2463 [1] BEARING-ROLLER  
48. 110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  110-0170 B [2] WASHER (0.55-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2961 B [2] SHIM (1.7-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
49. 110-0875 [2] PISTON  
50. 110-4753 [2] BEARING  
51. 008-1902 [2] CONE-BEARING  
52. 110-4790 [1] HOUSING-AXLE  
53. 110-4792 [1] HOUSING-BRAKE (LH)  
  110-4793 [1] HOUSING-BRAKE (RH)  
54. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
55. 110-0134 B [1] SHIM (0.4-MM THK)  
  110-0131 B [1] SHIM (1-MM THK)  
  110-0132 B [1] SHIM (0.8-MM THK)  
  110-0133 B [1] SHIM (0.6-MM THK)  
  B [1] SHIM (0.3-MM THK)  
  110-0136 B [1] SHIM (0.2-MM THK)  
  110-0126 B [1] SHIM (2-MM THK)  
  110-0127 B [1] SHIM (1.8-MM THK)  
  110-0128 B [1] SHIM (1.6-MM THK)  
56. 110-0859 [2] PIN-BEARING  
57. 096-9988 M [8] BOLT (M14X2X30-MM)  
58. 9R-6947 [2] SEAL-O-RING  
59. 9R-6952 [2] CAP-SEALING  
60. 110-0884 [2] HUB  
61. 110-0874 [20] BOLT-WHEEL  
62. 110-4745 [2] SEAL-O-RING  
63. 110-2464 [4] BEARING-ROLLER  
64. 110-0866 [2] CARRIER-PLANETARY  
65. 110-0862 [2] GEAR-RING  
66. 098-2996 [4] SEAL-O-RING  
67. 6S-3051 [2] CUP-BEARING  
68. 110-4737 [6] RING-RETAINING  
69. 4D-8648 [2] CUP-BEARING  
70. 110-0865 [2] SHAFT-SUN GEAR  
71. 009-3818 [1] CUP-BEARING  
72. 110-0846 [2] RING-RETAINING  
73. 2D-9190 [1] CUP-BEARING  
74. 110-0863 [2] WASHER-THRUST  
75. 110-0844 [2] WASHER-THRUST  
76. 110-0849 [2] NUT-SLOTTED  
77. 110-0861 [2] WASHER-TAB  
78. 9R-6965 M [4] SCREW (M10X1.5X20-MM)  
79. 110-0851 [2] SEAL  
80. 110-0850 [4] SEAL  
81. 110-0839 [2] BUSHING  
82. 110-0864 [2] RING-RETAINING  
83. 110-2460 M [4] BOLT (M12X1.5X95-MM)  
84. 8T-6385 M [32] BOLT (M16X2X180-MM)  
85. 110-2455 M [4] BOLT (M12X1.5X20-MM)  
86. 110-4733 [2] UNIVERSAL JOINT  
87. 8T-4779 M [8] BOLT (M16X2X35-MM)  
88. 110-0860 [2] PIN-BEARING  
89. 130-2703 [1] GEAR SET  
90. 110-0843 [1] WASHER (31X56X6-MM THK)  
91. 110-0848 M [1] NUT (M30X1.5-THD)  
92. 110-2456 [4] PIN-SPRING  
93. 110-0840 [2] TIE ROD  
94. 110-0871 [1] GUIDE  
95. 110-0847 [1] PLUG-SCREW  
96. 9R-6953 [6] SEAL-O-RING  
97. 109-4440 [5] PLUG  
98. 110-0841 [1] ROD-PISTON  
99. 110-4754 [1] GASKET  
100. 110-4759 [2] GUIDE-PISTON  
101. 110-0873 [1] CYLINDER  
102. 110-4742 [2] SEAL-O-RING  
103. 110-4739 [12] RING-SNAP  
104. 110-4735 [4] RING-GUIDE  
105. 5W-6392 [2] SEAL-O-RING  
106. 5W-6391 [2] SCRAPER  
107. 110-0872 [1] GUIDE  
108. 110-2459 M [8] BOLT (M14X2X105-MM)  
109. 6V-2652 [2] CONE-BEARING  
110. 110-0858 [2] CAP-SEALING  
111. 110-4743 [2] SEAL-O-RING  
112. 9R-3171 [4] FITTING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23870223
 

114-0166: AXLE GP-REAR

114-0166 AXLE GP-REAR
S/N 2DR1-2716
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
i00557653 SEBP2387
1140166 AXLE GP-REAR Parts scheme 1140166 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5837 [2] SHAFT AS  
    (EACH INCLUDES)
2. 9R-5219 [8] BOLT-SPECIAL  
3. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
4. 118-5839 [2] SEAL-REAR AXLE  
5. 030-1957 [2] CONE-BEARING (TAPERED ROLLER)  
6. 115-2137 [1] HOUSING AS (LH)  
7. 115-2138 [1] HOUSING AS  
    (EACH INCLUDES)
8. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
9. 9R-2412 [2] STUD  
10. 8S-9151 [1] CUP-BEARING  
11. 9R-2414 [1] GEAR (56-TEETH)  
12. 9R-9406 [1] HOUSING-REAR BRAKE  
13. 9X-8880 [25] BOLT (5/8-11X2-IN)  
14. 9X-8883 [1] BOLT (5/8-11X2.75-IN)  
15. 153-3194 [2] CARRIER AS  
    (EACH INCLUDES)
16. 7T-6652 [1] CONE-BEARING (TAPERED ROLLER)  
17. 9R-2421 [3] SHAFT  
18. 9R-2419 [3] KIT-BEARING  
19. 9R-2418 [6] WASHER (32.94X57.21X0.78-MM THK)  
20. 9R-2417 [3] WASHER (33.07X48.38X1.06-MM THK)  
21. 153-3192 [3] GEAR-PLANETARY (20 TEETH)  
22. 9R-2420 [1] RETAINER  
23. 9R-2435 B [2] SPACER (22.86X53.85X1.25-MM THK)  
  9R-2436 B [2] SPACER (22.86X53.85X1.35-MM THK)  
  9R-2437 B [2] SPACER (22.86X53.85X1.45-MM THK)  
  9R-2438 B [2] SPACER (22.86X53.85X1.55-MM THK)  
  9R-2439 B [2] SPACER (22.86X53.85X1.65-MM THK)  
  9R-2440 B [2] SPACER (22.86X53.85X1.75-MM THK)  
  9R-2441 B [2] SPACER (22.86X53.85X1.85-MM THK)  
  9R-2442 B [2] SPACER (22.86X53.85X1.96-MM THK)  
  9R-2443 B [2] SPACER (22.86X53.85X2.06-MM THK)  
  9R-2444 B [2] SPACER (22.86X53.85X2.16-MM THK)  
  9R-2445 B [2] SPACER (22.86X53.85X2.26-MM THK)  
24. 9R-2505 [1] SEAL  
25. 9R-2504 [1] SHAFT  
26. 9R-2506 [1] FORK  
27. 9R-2507 M [1] SCREW-SPECIAL  
28. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
29. 9R-2495 [2] SEAL  
30. 3J-9196 [4] NUT-JAM (1/2-20-THD)  
31. 9R-2425 [2] WASHER (23.088X69.6X9.52-MM THK)  
32. 9R-2466 M [2] BOLT (7/8-14X2.2-IN)  
33. 9R-2426 [2] LOCK  
34. 9R-2424 [2] GEAR (16-TEETH)  
35. 9R-9405 [1] HOUSING-REAR BRAKE (RH)  
36. 133-7234 [8] DISC-FRICTION  
37. 9R-9401 [8] PLATE  
38. 9R-2474 [2] PIN  
39. 055-1258 [1] HOUSING-BRAKE (RH)  
40. 055-1259 [1] HOUSING-BRAKE  
41. 9R-2427 B [1] SHIM (0.965-MM THK)  
  9R-2428 B [1] SHIM (1.118-MM THK)  
  9R-2429 B [1] SHIM (1.27-MM THK)  
  9R-2430 B [1] SHIM (1.422-MM THK)  
  9R-2431 B [1] SHIM (1.575-MM THK)  
  9R-2432 B [1] SHIM (1.727-MM THK)  
  9R-2433 B [1] SHIM (1.88-MM THK)  
  9R-2434 B [1] SHIM (2.032-MM THK)  
42. 2B-2006 [12] BOLT (1/2-13X4.75-IN)  
43. 9R-9398 [2] MANIFOLD-BRAKE TUBE  
44. 8H-1607 [2] SEAL-O-RING  
45. 5L-9018 [4] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
46. 8M-8157 [4] SEAL-O-RING  
47. 8T-6760 [2] PLUG-PIPE (1-1/2-11-1/2 NPT)  
48. 9R-9410 [2] SEAL-REAR BRAKE  
49. 9R-9408 [2] PISTON-REAR BRAKE  
50. 9R-9409 [2] SEAL-REAR BRAKE  
51. 9R-0823 [1] LEVER AS  
52. 9R-0883 [1] PIN  
53. 9R-2493 [1] RING  
54. 9R-2492 [1] WASHER (64.389X78.74X3.124-MM THK)  
55. 9R-2482 [1] COUPLING  
56. 9R-2486 [1] SPRING  
57. 9R-2483 [1] ADAPTER  
58. 2S-0480 [1] CUP-TAPERED ROLLER  
59. 2S-0479 [1] CONE-BEARING (TAPERED ROLLER)  
60. 9R-2485 [8] BOLT (1/2-13X2.87-IN)  
61. 9R-2480 [1] CASE AS  
  9R-2485 [1] BOLT (1/2-13X2.87-IN)  
62. 9R-2484 [2] BUSHING-TERMINAL  
63. 9R-2490 [2] WASHER (76.2X101.6X1.524-MM THK)  
64. 9R-2488 [1] GEAR (16-TEETH)  
65. 9R-2491 [1] SPIDER  
66. 9R-9403 [4] PINION  
67. 9R-2489 [4] WASHER-SPRING  
68. 9R-2487 [1] GEAR (16-TEETH)  
69. 118-9117 [1] GEAR SET  
70. 5L-9656 [1] CONE-BEARING (TAPERED ROLLER)(BEARING)  
71. 2A-4576 [1] CUP-BEARING (TAPERED ROLLER)  
72. 9R-2446 B [1] SPACER (45.86X50.98X31.858-MM THK)  
  9R-2447 B [1] SPACER (45.86X50.98X31.908-MM THK)  
  9R-2448 B [1] SPACER (45.86X50.98X31.959-MM THK)  
  9R-2449 B [1] SPACER (45.86X50.98X32.01-MM THK)  
  9R-2450 B [1] SPACER (45.86X50.98X32.061-MM THK)  
  9R-2451 B [1] SPACER (45.86X50.98X32.112-MM THK)  
  9R-2452 B [1] SPACER (45.86X50.98X32.162-MM THK)  
  9R-2453 B [1] SPACER (45.86X50.98X32.213-MM THK)  
  9R-2454 B [1] SPACER (45.86X50.98X32.264-MM THK)  
  9R-2455 B [1] SPACER (45.86X50.98X32.315-MM THK)  
  9R-2456 B [1] SPACER (45.86X50.98X32.366-MM THK)  
  9R-2457 B [1] SPACER (45.86X50.98X32.416-MM THK)  
  9R-2458 B [1] SPACER (45.86X50.98X32.467-MM THK)  
  9R-2459 B [1] SPACER (45.86X50.98X32.518-MM THK)  
  9R-2460 B [1] SPACER (45.86X50.98X32.569-MM THK)  
73. 9R-6671 M [12] BOLT (1/2-20X1.62-IN)  
74. 0T-0318 [2] BOLT (7/16-14X1-IN)  
75. 9R-2502 [1] NUT (1-1/4-18-THD)  
76. 9R-9404 [1] BLOCK  
77. 2M-2570 [12] LOCKNUT (1/2-20-THD)  
78. 9R-6602 [2] PLUG-MAGNETIC  
79. 9R-2508 [1] HOUSING  
80. 3B-5302 [1] PIN-COTTER  
81. 9R-2494 [1] RING  
82. 7T-7621 [1] BEARING AS  
83. 7T-6654 [1] CONE-BEARING (TAPERED ROLLER)  
84. 9R-2512 [1] SEAL  
85. 9R-2407 [1] RETAINER AS  
86. 4K-5843 [1] CUP-BEARING (TAPERED ROLLER)  
87. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
88. 3B-4509 [6] LOCKWASHER  
89. 3K-3379 [6] BOLT (9/16-12X1-IN)  
90. 7T-6653 [1] CONE-BEARING (TAPERED ROLLER)  
91. 9R-2496 [1] SEAL  
92. 9R-2499 [1] SEAL AS  
93. 9R-2498 [1] RETAINER  
94. 113-1147 [1] FLANGE  
95. 9R-2497 [1] SEAL  
96. 9R-2501 [1] WASHER (32.5X60.5X5.6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23870224
 

156-2857: AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N 2DR1-2716
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
i00783340 SEBP2387
1562857 AXLE GP-REAR Parts scheme 1562857 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5837 [2] SHAFT AS  
    (EACH INCLUDES)
1A. 9R-5219 [8] BOLT-SPECIAL  
2. 9R-2407 [1] RETAINER AS  
2A. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
2B. 4K-5843 [1] CUP-BEARING (TAPERED ROLLER)  
3. 156-1928 [1] HOUSING AS (LH)  
3A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
3B. 8S-9151 [1] CUP-BEARING  
3C. [2] STUD  
3D. 156-1930 [1] GEAR-RING (56-TEETH)  
4. [1] HOUSING AS  
4A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
4B. 8S-9151 [1] CUP-BEARING  
4C. [2] STUD  
4D. 156-1930 [1] GEAR-RING (56-TEETH)  
5. 186-4117 [2] CARRIER AS  
    (EACH INCLUDES)
5A. 7T-6652 [1] CONE-BEARING (TAPERED ROLLER)  
5B. 9R-2417 [3] WASHER (33.07X48.38X1.06-MM THK)  
5C. 9R-2418 [6] WASHER (32.94X57.21X0.78-MM THK)  
5D. 9R-2419 [3] KIT-BEARING  
5E. 9R-2420 [1] RETAINER  
5F. 9R-2421 [3] SHAFT  
5G. 186-4118 [3] GEAR-PLANETARY (20-TEETH)  
6. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
7. 9R-0883 [1] PIN  
8. 9R-0823 [1] LEVER AS  
9. 9R-2427 B [1] SHIM (0.965-MM THK)  
  9R-2428 B [1] SHIM (1.118-MM THK)  
  9R-2429 B [1] SHIM (1.27-MM THK)  
  9R-2430 B [1] SHIM (1.422-MM THK)  
  9R-2431 B [1] SHIM (1.575-MM THK)  
  9R-2432 B [1] SHIM (1.727-MM THK)  
  9R-2433 B [1] SHIM (1.88-MM THK)  
  9R-2434 B [1] SHIM (2.032-MM THK)  
10. 9R-2425 [2] WASHER (23.088X69.6X9.52-MM THK)  
11. 156-2572 [1] HOUSING-REAR BRAKE (RH)  
12. 9R-9410 [2] SEAL-REAR BRAKE  
13. 9R-9409 [2] SEAL-REAR BRAKE  
14. 9R-9408 [2] PISTON-REAR BRAKE  
15. 9R-2446 B [1] SPACER (45.86X50.98X31.858-MM THK)  
  9R-2447 B [1] SPACER (45.86X50.98X31.908-MM THK)  
  9R-2448 B [1] SPACER (45.86X50.98X31.959-MM THK)  
  9R-2449 B [1] SPACER (45.86X50.98X32.01-MM THK)  
  9R-2450 B [1] SPACER (45.86X50.98X32.061-MM THK)  
  9R-2451 B [1] SPACER (45.86X50.98X32.112-MM THK)  
  9R-2452 B [1] SPACER (45.86X50.98X32.162-MM THK)  
  9R-2453 B [1] SPACER (45.86X50.98X32.213-MM THK)  
  9R-2454 B [1] SPACER (45.86X50.98X32.264-MM THK)  
  9R-2455 B [1] SPACER (45.86X50.98X32.315-MM THK)  
  9R-2456 B [1] SPACER (45.86X50.98X32.366-MM THK)  
  9R-2457 B [1] SPACER (45.86X50.98X32.416-MM THK)  
  9R-2458 B [1] SPACER (45.86X50.98X32.467-MM THK)  
  9R-2459 B [1] SPACER (45.86X50.98X32.518-MM THK)  
  9R-2460 B [1] SPACER (45.86X50.98X32.569-MM THK)  
16. 230-4017 [8] DISC-BRAKE  
17. 9R-2474 [2] PIN  
18. 9R-9401 [8] PLATE  
19. 8S-4740 [12] BOLT (9/16-12X5-IN)  
20. 9R-9398 [2] MANIFOLD-BRAKE TUBE  
21. 8H-1607 [2] SEAL-O-RING  
22. 9R-2424 [2] GEAR (16-TEETH)  
23. 8M-8157 [4] SEAL-O-RING  
24. 2A-4576 [1] CUP-BEARING (TAPERED ROLLER)  
25. 5L-9656 [1] CONE-BEARING (TAPERED ROLLER)  
26. 9X-8880 [25] BOLT (5/8-11X2-IN)  
27. 9R-2508 [1] HOUSING  
28. 113-1147 [1] FLANGE  
29. 9R-2497 [1] SEAL  
30. 9R-2501 [1] WASHER (32.5X60.5X5.6-MM THK)  
31. 9R-2502 [1] NUT (1-1/4-18-THD)  
32. 3B-5302 [1] PIN-COTTER  
33. 9R-2498 [1] RETAINER  
34. 3B-4509 [6] LOCKWASHER  
35. 3K-3379 [6] BOLT (9/16-12X1-IN)  
36. 9X-8883 [1] BOLT (5/8-11X2.75-IN)  
37. 5L-9018 [4] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
38. 8T-6760 [2] PLUG-PIPE (1-1/2-11-1/2 NPT)  
39. 9R-2499 [1] SEAL AS  
40. 9R-2496 [1] SEAL  
41. 7T-6653 [1] CONE-BEARING (TAPERED ROLLER)  
42. 118-5839 [2] SEAL-REAR AXLE  
43. 9R-2512 [1] SEAL  
44. 030-1957 [2] CONE-BEARING (TAPERED ROLLER)  
45. 7T-6654 [1] CONE-BEARING (TAPERED ROLLER)  
46. 9R-2505 [1] SEAL  
47. 9R-2504 [1] SHAFT  
48. 9R-2507 M [1] SCREW-SPECIAL  
49. 7T-7621 [1] BEARING AS  
50. 9R-2494 [1] RING  
51. 9R-2480 [1] CASE AS  
52. 2S-0480 [1] CUP-TAPERED ROLLER  
53. 2S-0479 [1] CONE-BEARING (TAPERED ROLLER)  
54. 9R-2506 [1] FORK  
55. 9R-2492 [1] WASHER (64.389X78.74X3.124-MM THK)  
56. 9R-2493 [1] RING  
57. 9R-2488 [1] GEAR (16-TEETH)  
58. 9R-2482 [1] COUPLING  
59. 282-9821 [1] HOUSING-BRAKE (LH)  
60. 9R-2486 [1] SPRING  
61. 9R-2483 [1] ADAPTER  
62. 9R-2484 [2] BUSHING-TERMINAL  
63. 9R-2490 [2] WASHER (76.2X101.6X1.524-MM THK)  
64. 9R-2491 [1] SPIDER  
65. 9R-9403 [4] PINION  
66. 9R-2489 [4] WASHER-SPRING  
67. 9R-2485 [8] BOLT (1/2-13X2.87-IN)  
68. 9R-2495 [2] SEAL  
69. 118-9117 [1] GEAR SET  
70. 9R-6671 M [12] BOLT (1/2-20X1.62-IN)  
71. 2M-2570 [12] LOCKNUT (1/2-20-THD)  
72. 9R-2503 [1] BLOCK  
73. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
74. 0T-0318 [2] BOLT (7/16-14X1-IN)  
75. 9R-2487 [1] GEAR (16-TEETH)  
76. 9R-2435 B [2] SPACER (22.86X53.85X1.25-MM THK)  
  9R-2436 B [2] SPACER (22.86X53.85X1.35-MM THK)  
  9R-2437 B [2] SPACER (22.86X53.85X1.45-MM THK)  
  9R-2438 B [2] SPACER (22.86X53.85X1.55-MM THK)  
  9R-2439 B [2] SPACER (22.86X53.85X1.65-MM THK)  
  9R-2440 B [2] SPACER (22.86X53.85X1.75-MM THK)  
  9R-2441 B [2] SPACER (22.86X53.85X1.85-MM THK)  
  9R-2442 B [2] SPACER (22.86X53.85X1.96-MM THK)  
  9R-2443 B [2] SPACER (22.86X53.85X2.06-MM THK)  
  9R-2444 B [2] SPACER (22.86X53.85X2.16-MM THK)  
  9R-2445 B [2] SPACER (22.86X53.85X2.26-MM THK)  
77. 9R-6602 [2] PLUG-MAGNETIC  
78. 5P-0540 [4] NUT-HEX FULL (9/16-18-THD)  
79. 282-9822 [1] HOUSING-BRAKE (RH)  
80. 156-1933 [1] HOUSING-REAR BRAKE (LH)  
81. 9R-2426 [2] LOCK  
82. 9R-2466 M [2] BOLT (7/8-14X2.2-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23870225
 

150-1281: CHART-WHEEL & TIRE

150-1281 CHART-WHEEL & TIRE
S/N 1TR1-1283; 2DR1-2716
AN ATTACHMENT
i00810171 SEBP2387
1501281 CHART-WHEEL & TIRE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (FOR USAGE REFER TO CHART)
1. 9R-0315 [1] WHEEL AS (FRONT)  
2. 9R-1572 [1] WHEEL AS  
3. 9R-2937 [1] WHEEL AS  
4. 135-0770 [1] WHEEL AS (FRONT)  
5. 135-0786 [1] WHEEL AS (FRONT)  
6. 141-7221 NUT-HEX FLANGE (3/4-16-THD)  
7. 6D-0337 [1] VALVE GP-TIRE  
  6D-0443 [1] HOUSING AS-CORE  
  2D-2628 [1] CORE-VALVE  
  2D-2633 [1] CAP  
  8D-2707 [2] SPUD AS  
  2D-2629 [1] GROMMET  
  2D-2630 [1] WASHER  
  2D-2631 [1] NUT (0.482-26-THD)  
    CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT
 

#SEBP23870226
 

150-4377: CHART-WHEEL & TIRE

150-4377 CHART-WHEEL & TIRE
S/N 1TR1-1283; 2DR1-2716
AN ATTACHMENT
i00810172 SEBP2387
1504377 CHART-WHEEL & TIRE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (FOR USAGE REFER TO CHART)
1. 102-8670 [1] WHEEL AS (REAR)  
2. 102-8682 [1] WHEEL AS  
3. 112-4410 [1] WHEEL AS (REAR)  
4. 112-4411 [1] WHEEL AS (REAR)  
5. 112-4412 [1] WHEEL AS (REAR)  
6. 114-5632 [1] WHEEL AS  
7. 119-7776 [1] WHEEL AS (REAR)  
8. 119-7785 [1] WHEEL AS (REAR)  
9. 119-7789 [1] WHEEL AS (REAR)  
10. 141-7221 NUT-HEX FLANGE (3/4-16-THD)  
11. 6D-0337 [1] VALVE GP-TIRE  
  6D-0443 [1] HOUSING AS-CORE  
  2D-2628 [1] CORE-VALVE  
  2D-2633 [1] CAP  
  8D-2707 [2] SPUD AS  
  2D-2629 [1] GROMMET  
  2D-2630 [1] WASHER  
  2D-2631 [1] NUT (0.482-26-THD)  
    CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT
 

#SEBP23870227
 

8Y-7481: CONTROL GP-DIFFERENTIAL LOCK

8Y-7481 CONTROL GP-DIFFERENTIAL LOCK
S/N 2DR1-2716
PART OF 143-2915, 8Y-7476 POWER TRAIN AR
i00554992 SEBP2387
8Y7481 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-5567 [1] PLATE AS  
2. 8T-4244 M [1] NUT (M12X1.75-THD)  
3. 5P-0372 [2] LOCK PIN  
4. 8B-1419 [1] PIN-CLEVIS  
5. 191-9113 [1] ROD AS  
6. 103-4867 [1] SPRING  
7. 8T-4815 [2] ROD END  
8. 8T-4133 M [1] NUT (M10X1.5-THD)  
9. 9R-3051 [1] ROD  
10. 9R-2806 [1] PIN  
11. 9R-2807 [1] CLIP (RETAINER)  
12. 9R-1581 [1] BOOT  
13. 8C-4987 [1] PIN-CLEVIS  
  M   METRIC PART
 

#SEBP23870228
 

111-7907: DRIVE GP-FLEXIBLE COUPLING

111-7907 DRIVE GP-FLEXIBLE COUPLING
S/N 1TR1-1283; 2DR1-2716
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE, 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i00483308 SEBP2387
1117907 DRIVE GP-FLEXIBLE COUPLING Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
2. 6V-8455 M [6] BOLT (M10X1.5X16-MM)  
3. 117-9713 [1] PLATE-CONVERTER REINFORCEMENT  
4. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
5. 111-7906 [1] PLATE-CONVERTER DRIVE  
  M   METRIC PART
 

#SEBP23870229
 

138-7381: FILLER GP-POWER TRAIN OIL

138-7381 FILLER GP-POWER TRAIN OIL -POWER SHIFT
S/N 1TR783-1283; 2DR1050-2716
PART OF 140-6159 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i00635403 SEBP2387
1387381 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [2] SEAL-O-RING  
2. 4J-0522 [1] SEAL-O-RING  
3. 6V-0852 [2] CAP-DUST  
4. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
5. 7C-8246 [1] SPACER (10.5X20X24-MM THK)  
6. 112-6219 [1] BRACKET AS  
7. 138-7378 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION)  
8. 138-7380 [1] TUBE AS  
9. 146-1816 [1] BRACKET AS  
10. 148-1899 M [1] BOLT-CARRIAGE (M10X1.5X60-MM)  
11. 5P-7854 [2] CLIP  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [1] NUT (M10X1.5-THD)  
14. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
15. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
16. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Axle Universal Joint (Front) - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Differential Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Differential Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Differential Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Differential Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Final Drive Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Final Drive Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Final Drive Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Final Drive Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
Specifications
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Systems Operation
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Axle Group (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Differential (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Pinion Assembly (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Final Drive Planetary Carrier Hub
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Brakes (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Differential (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Differential (Front)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Tie Rod
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Drive Pinion
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
Serviceable Parts for 4 Wheel Drive Front Axle Steering Cylinder{4303}
1997/08/11
Additional Serviceable Parts Available For Front Axle {3020}
1999/05/10
Correct Identification of the Bearing Cones for the 154-5471 Drive and Steering Axle for C-Series Machines {3020, 3278}
2000/02/14
Service Parts for the Front AWD Axle Are Now Available {3020, 3260, 3278, 4303}
2000/02/14
New Maintenance Interval for Checking the Oil Level of the Axle Oscillation Bearing {3020, 3250, 7551}
2000/02/21
Correction to the Disassembly and Assembly, SENR1206 for the Differential {3258}
2000/12/25
Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
2001/06/11
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
2005/01/24
Oil Change Interval for the Rear Axle {3260}
2002/05/20
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Correction to Axle Housing (Front) (All Wheel Drive) {3260}
2005/05/16
Empty Compartment Brake Purging Procedure {3278, 3282, 4269, 4291}
2006/03/27
New Brake Housings for the Rear Axle Are Available {3278, 3282}
2008/06/23
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}

Caterpillar Parts SIS Catalog 438C :

AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
AXLE & MTG GP-DRIVE & STEERING
119-8191 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-DRIVE & STEERING
112-9631 AXLE & MTG GP-DRIVE & STEERING
WIRING GP-STEERING
119-7022 WIRING GP-STEERING
WIRING GP-STABILIZER ALARM
147-2732 WIRING GP-STABILIZER ALARM
WIRING GP-STABILIZER ALARM
136-7436 WIRING GP-STABILIZER ALARM
WIRING GP-STABILIZER
119-5872 WIRING GP-STABILIZER
WIRING GP-RIDE CONTROL
175-6771 WIRING GP-RIDE CONTROL
AXLE GP-DRIVE & STEERING
110-8632 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING
AXLE GP-REAR
114-0166 AXLE GP-REAR
AXLE GP-REAR
156-2857 AXLE GP-REAR
CHART-WHEEL & TIRE
150-1281 CHART-WHEEL & TIRE
CHART-WHEEL & TIRE
150-4377 CHART-WHEEL & TIRE
CONTROL GP-DIFFERENTIAL LOCK
8Y-7481 CONTROL GP-DIFFERENTIAL LOCK
DRIVE GP-FLEXIBLE COUPLING
111-7907 DRIVE GP-FLEXIBLE COUPLING

Truck sale:

Caterpillar 438C
 
Caterpillar 438C
- backhoe loader
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
35.061 
Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
 
42,862 
Caterpillar 438CAWS, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 438C, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
CATERPILLAR 438C 2000
 
CATERPILLAR 438C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.