AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-1842 CONTROL GP-HYDRAULIC HAND -BACKHOE S/N 5YN1-15147 FOUR LEVER PART OF 119-4005, 121-8333, 126-0188 HYDRAULIC AR AN ATTACHMENT 416C


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416C BACKHOE LOADER 5YN
 416C Backhoe Loader Center Pivot, Single Tilt 5YN00001-15147 (MACHINE) POWERED BY 3054 Engine SEBP2389 416C 5YN   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5004 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9415 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9416 CONTROL GP-HYDRAULIC HAND
 

#SEBP23890810
 

112-1842: CONTROL GP-HYDRAULIC HAND

112-1842 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 5YN1-15147
FOUR LEVER
PART OF 119-4005, 121-8333, 126-0188 HYDRAULIC AR
AN ATTACHMENT
i00487517 SEBP2389
1121842 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [2] ROD END  
2. 8T-9000 [1] KNOB  
3. 9R-2806 [2] PIN  
4. 9R-2807 [2] CLIP (RETAINER)  
5. 116-3016 [1] LEVER AS  
  5V-4410 [1] BUSHING  
6. 116-3018 [1] ROD  
7. 136-7439 B [1] SPACER (20X40X3-MM THK)  
8. 136-7440 B [1] SHIM (1-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 101-2788 J [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
11. 117-5672 [1] BOOT  
12. 123-3119 [1] PLATE  
13. 186-2854 L [1] FILM-INSTRUCTION  
  B   USE AS REQUIRED
  J   USE AS REQUIRED WHEN MACHINE IS EQUIPPED WITH E-STICK
  L   USE AS REQUIRED ON MACHINES WITHOUT E-STICK
  M   METRIC PART
 

#SEBP23890811
 

126-5004: CONTROL GP-HYDRAULIC HAND

126-5004 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N 5YN1-15147
EXCAVATOR, FIELD
AN ATTACHMENT
i00514655 SEBP2389
1265004 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6431 [2] ROD END  
2. 9R-1968 B [6] SPACER (10.6X13.6X7-MM THK)  
3. 006-8606 [1] RING-RETAINING  
4. 117-1052 [1] SHAFT AS  
5. 117-1051 [1] PLATE AS  
6. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
7. 5V-4410 [2] BUSHING  
8. 9R-3067 [1] PIN  
9. 128-6150 [1] FILM-INSTRUCTION  
10. 136-7440 B [8] SHIM (1-MM THK)  
11. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)(M10X1.50X20MM)  
12. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
13. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4815 [2] ROD END  
15. 9R-2806 [2] PIN  
16. 9R-2807 [6] CLIP (RETAINER)  
17. 8T-4133 M [6] NUT (M10X1.5-THD)  
18. 136-7439 B [8] SPACER (20X40X3-MM THK)  
19. 142-7404 [2] ROD  
20. 144-0898 [2] ROD AS  
21. 142-7405 [2] COLLAR  
22. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23890812
 

139-9415: CONTROL GP-HYDRAULIC HAND

139-9415 CONTROL GP-HYDRAULIC HAND
S/N 5YN1-15147
3 LEVER FOOT
AN ATTACHMENT
i00497328 SEBP2389
1399415 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-3984 [2] KNOB  
3. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [1] BALL JOINT  
5. 8T-4815 [10] ROD END  
6. 8T-6431 [1] ROD END  
7. 8T-6658 [1] PIN  
8. 8T-9000 [3] KNOB  
9. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2807 [14] CLIP (RETAINER)  
11. 9R-3135 [3] PIN  
12. 9R-4764 [1] ROD  
13. 9R-8825 [4] PLATE  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [2] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 006-8606 [2] RING-RETAINING  
18. 115-6455 [1] LEVER AS  
  5V-4410 [2] BUSHING  
19. 115-6456 [1] LEVER AS  
  5V-4410 [2] BUSHING  
20. 115-6457 [1] LEVER AS  
  5V-4410 [2] BUSHING  
21. 116-2449 [1] SHAFT AS  
22. 116-2452 [1] PLATE  
23. 116-3019 [3] ROD  
24. 116-4372 [1] SHAFT AS  
25. 116-4373 [1] SHAFT AS  
26. 116-4374 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
27. 116-4375 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
28. 116-4381 [2] SEAL  
29. 116-4478 [1] BOSS AS  
  5V-4410 [1] BUSHING  
30. 117-5672 [5] BOOT  
31. 123-2846 [1] SUPPORT AS  
32. 123-3119 [1] PLATE  
33. 126-4358 [2] PLATE  
34. 128-6151 [1] FILM-INSTRUCTION  
35. 130-3291 [1] PLATE AS  
36. 130-3292 [1] PLATE AS  
37. 130-3293 [1] ROD AS  
38. 130-3294 [1] ROD AS  
39. 130-3858 [2] MAT  
40. 136-7439 B [12] SPACER (20X40X3-MM THK)  
41. 136-7440 B [11] SHIM (1-MM THK)  
42. 139-9414 [1] PLATE  
43. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
44. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
45. 7X-2535 M [2] BOLT (M6X1X60-MM)  
46. 8T-4133 M [14] NUT (M10X1.5-THD)  
47. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
48. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
49. 9R-2806 [10] PIN  
50. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
51. 141-1762 [3] SPACER (21.2X25.4X20-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23890813
 

139-9416: CONTROL GP-HYDRAULIC HAND

139-9416 CONTROL GP-HYDRAULIC HAND
S/N 5YN1-15147
3 LEVER FOOT, E-STICK, FIELD INSTALLATION ONLY
AN ATTACHMENT
i00497338 SEBP2389
1399416 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-3984 [2] KNOB  
3. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [1] BALL JOINT  
5. 8T-4815 [12] ROD END  
6. 8T-6431 [1] ROD END  
7. 8T-6658 [1] PIN  
8. 8T-9000 [4] KNOB  
9. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2807 [16] CLIP (RETAINER)  
11. 9R-3135 [3] PIN  
12. 9R-4764 [1] ROD  
13. 9R-8825 [4] PLATE  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [2] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 006-8606 [2] RING-RETAINING  
18. 101-2788 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
19. 115-6455 [1] LEVER AS  
  5V-4410 [2] BUSHING  
20. 115-6456 [1] LEVER AS  
  5V-4410 [2] BUSHING  
21. 115-6457 [1] LEVER AS  
  5V-4410 [2] BUSHING  
22. 116-2449 [1] SHAFT AS  
23. 116-2452 [1] PLATE  
24. 116-3016 [1] LEVER AS  
  5V-4410 [1] BUSHING  
25. 116-3018 [1] ROD  
26. 116-3019 [3] ROD  
27. 116-4372 [1] SHAFT AS  
28. 116-4373 [1] SHAFT AS  
29. 116-4374 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
30. 116-4375 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
31. 116-4381 [2] SEAL  
32. 116-4478 [1] BOSS AS  
  5V-4410 [1] BUSHING  
33. 117-5672 [6] BOOT  
34. 123-2846 [1] SUPPORT AS  
35. 123-3119 [2] PLATE  
36. 126-4358 [2] PLATE  
37. 128-6151 [1] FILM-INSTRUCTION  
38. 130-3291 [1] PLATE AS  
39. 130-3292 [1] PLATE AS  
40. 130-3293 [1] ROD AS  
41. 130-3294 [1] ROD AS  
42. 130-3858 [2] MAT  
43. 136-7439 B [10] SPACER (20X40X3-MM THK)  
44. 136-7440 B [14] SHIM (1-MM THK)  
45. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
46. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
47. 7X-2535 M [2] BOLT (M6X1X60-MM)  
48. 8T-4133 M [16] NUT (M10X1.5-THD)  
49. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
50. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
51. 9R-2806 [12] PIN  
52. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
53. 141-1762 [2] SPACER (21.2X25.4X20-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23890814
 

9R-9705: CONTROL GP-HYDRAULIC HAND

9R-9705 CONTROL GP-HYDRAULIC HAND
S/N 5YN1-15147
AN ATTACHMENT
i00447449 SEBP2389
9R9705 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7439 B [4] SPACER (20X40X3-MM THK)  
2. 8C-3392 [2] ROD END  
3. 8T-3984 [2] KNOB  
4. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [4] BALL JOINT  
6. 8T-4815 [8] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-2806 [8] PIN  
10. 9R-2807 [8] CLIP (RETAINER)  
11. 9R-8087 [1] LEVER AS  
  9R-9973 [1] PLATE AS (LH)  
12. 9R-9709 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
13. 9R-9720 [2] BRACKET AS  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [6] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 9R-9969 [2] BEARING  
18. 9R-9972 [1] LEVER AS  
  9R-9975 [1] PLATE AS (RH)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 104-9483 [1] PLATE  
21. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
22. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
23. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
24. 117-5672 [2] BOOT  
25. 8T-4133 M [12] NUT (M10X1.5-THD)  
26. 110-1463 [1] PLATE-INSTRUCTION  
27. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
28. 006-8606 [2] RING-RETAINING  
29. 136-7440 B [8] SHIM (1-MM THK)  
30. 157-7237 [1] BRACKET AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23890815
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 5YN1-15147
PART OF 8Y-8001 CHASSIS AR
Type 1
i00566050 SEBP2389
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
4. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
5. 5H-3193 [1] PIN-SPRING  
6. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4773 [1] BALL JOINT  
8. 8T-4815 [2] ROD END  
9. 8T-9501 [2] SCREW (10-16X0.75-IN)  
10. 8Y-7237 [1] SWITCH GP-ROCKER (NEUTRALIZER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 9M-7783 [1] SPACER (0.65X1.188X0.81-IN THK)  
12. 9R-1765 [1] COVER-TOP (TOP)  
13. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
14. 9R-1767 [1] BOOT  
15. 9R-2806 [1] PIN  
16. 9R-2807 [2] CLIP (RETAINER)  
17. 9R-3067 [1] PIN  
18. 9R-4917 [2] ROD-CONTROL  
19. 9R-8165 [4] BEARING  
20. 9R-9901 [4] FASTENER (CLIP)  
21. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
22. 9R-9946 [1] JOINT AS  
23. 9R-9950 [1] PIN  
24. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
25. 104-1970 [1] ROD AS  
26. 104-9488 [1] PLATE  
27. 107-5591 [1] NUT-JAM (3/4-16-THD)  
28. 110-8884 [1] PLATE  
29. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
30. 115-4343 [1] LEVER AS  
31. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
32. 8T-4133 M [10] NUT (M10X1.5-THD)  
33. 112-2912 [1] ROD AS  
  095-9230 [1] PIN-SPRING  
  114-8498 [1] SPRING (INNER)  
  114-8692 [1] CYLINDER  
34. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4766 [1] ROD END  
37. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
38. 140-6021 [1] PLATE  
39. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23890816
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 5YN1-15147
PART OF 143-1758, 8Y-8001 CHASSIS AR
Type 2
i00729775 SEBP2389
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 BC [6] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 5H-3193 [1] PIN-SPRING  
4. 8T-4766 [1] ROD END  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [2] ROD END  
7. 8T-9501 [2] SCREW (10-16X0.75-IN)  
8. 9R-1765 [1] COVER-TOP (TOP)  
9. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
10. 9R-1767 [1] BOOT  
11. 9R-4917 [2] ROD-CONTROL  
12. 9R-8165 [4] BEARING  
13. 9R-9901 [4] FASTENER (CLIP)  
14. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
15. 9R-9946 [1] JOINT AS  
16. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
17. 104-1970 [1] ROD AS  
18. 104-9488 [1] PLATE  
19. 107-5591 [1] NUT-JAM (3/4-16-THD)  
20. 110-8884 [1] PLATE  
21. 115-4343 [1] LEVER AS  
22. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
23. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
24. 140-6021 [1] PLATE  
25. 145-4458 C [1] PIN  
26. 200-1790 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
27. 3S-2093 [1] STRAP-CABLE  
28. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
29. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [10] NUT (M10X1.5-THD)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
35. 9R-2806 [1] PIN  
36. 9R-2807 [2] CLIP (RETAINER)  
37. 9R-3067 [1] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23890817
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 5YN1-15147
PART OF 139-1921, 147-3102 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i00488141 SEBP2389
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP23890818
 

106-6373: CONTROL GP-HYDRAULIC PEDAL

106-6373 CONTROL GP-HYDRAULIC PEDAL -RIGHT SWING
S/N 5YN1-15147
PART OF 106-6253, 121-8326, 121-8327, 121-8331 HYDRAULIC AR
AN ATTACHMENT
i00490069 SEBP2389
1066373 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 106-6374 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
14. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
15. 8T-4773 [1] BALL JOINT  
16. 8T-4815 [1] ROD END  
17. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP23890819
 

113-0720: CONTROL GP-HYDRAULIC PEDAL

113-0720 CONTROL GP-HYDRAULIC PEDAL -LEFT SWING
S/N 5YN1-15147
LEFT FOOT FACTORY
PART OF 119-4006, 121-8331 HYDRAULIC AR
AN ATTACHMENT
i00471555 SEBP2389
1130720 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0592 [1] PEDAL AS  
2. 106-6374 [1] SUPPORT AS  
3. 9R-2614 [2] BEARING  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
14. 8T-4773 [1] BALL JOINT  
15. 8T-4815 [1] ROD END  
16. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 416C :

CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1834 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
104-1966 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-SIDE
104-3919 CONSOLE GP-SIDE
CONSOLE GP-REAR
104-3921 CONSOLE GP-REAR
CONSOLE GP-FRONT
104-6044 CONSOLE GP-FRONT
CONTROL GP-HYDRAULIC HAND
126-5004 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9415 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9416 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.