WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)FORK GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP23951110
507-8105: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951111
507-8106: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951112
507-8107: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951113
507-8108: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951114
559-1152: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951115
559-1153: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951116
559-1154: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951117
559-1155: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951118
559-1156: EDGE-SEGMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23951119
190-3982: FORK GP-LOG
190-3982 FORK GP-LOG -PIN-ON
S/N 2KR1-UP
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
S/N 2KR1-UP
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-1195 | [4] | SPACER-SPECIAL | |
| 2. | 3B-8489 | [6] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| 4. | 153-3742 | [2] | TIP-WEAR | |
| 5. | 153-3743 | [4] | PIN-RETAINER | |
| 6. | 153-3744 | [4] | RING-RETAINING | |
| 7. | 153-3750 | [2] | PIN-PIVOT | |
| 8. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
| 9. | 159-8038 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 10. | 160-9881 | [2] | PIN AS | |
| 11. | 169-8238 | [2] | PIN AS | |
| 12. | 190-7486 I | [1] | HOSE AS | |
| 13. | 190-7487 I | [1] | HOSE AS | |
| 14. | 190-7488 I | [1] | HOSE AS | |
| 15. | 190-7489 I | [1] | HOSE AS | |
| 16. | 192-1270 I | [2] | HOSE AS | |
| 17. | 203-2208 Y | [2] | CYLINDER GP-FORK | |
| 18. | 212-5818 | [1] | CLAMP AS (RH) | |
| 18A. | 7K-9209 | [2] | SEAL-LIP TYPE | |
| 18B. | 8K-2360 | [2] | BUSHING | |
| 19. | 212-5819 | [1] | CLAMP AS (LH) | |
| 19A. | 7K-9209 | [2] | SEAL-LIP TYPE | |
| 19B. | 8K-2360 | [2] | BUSHING | |
| 20. | Y | [1] | FRAME GP-FORK (PIN-ON) | |
| 21. | 3D-2824 | [4] | SEAL-O-RING | |
| 22. | 3E-7443 | [2] | TEE-UNION | |
| 23. | 5K-9090 | [4] | SEAL-O-RING | |
| 24. | 5P-7468 | [2] | CLIP (SLOT) | |
| 25. | 5P-7469 | [2] | CLIP (TAB) | |
| 26. | 5P-8444 | [2] | GROMMET (37-MM ID) | |
| 27. | 6V-8637 | [2] | CONNECTOR | |
| 28. | 6V-9007 | [4] | ELBOW | |
| 29. | 6V-9746 | [8] | SEAL-O-RING | |
| 30. | 6V-9854 | [2] | ELBOW (SWIVEL) | |
| 31. | 7G-3832 | [4] | GROMMET | |
| 32. | 7G-3833 | [4] | CLIP (TAB) | |
| 33. | 7G-3834 | [4] | CLIP (SLOT) | |
| 34. | 7X-2563 M | [2] | BOLT (M20X2.5X60-MM) | |
| 35. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 36. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 37. | 8T-4223 | [14] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
