AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3W-7485 IDLER GP-FRONT S/N 2ZN1-1749 PART OF 8Y-5344 UNDERCARRIAGE AR 953C TRACK LOADER


UNDERCARRIAGE
IDLER GP
TRACK GP
LINK GP-TRACK

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN00001-01749 (MACHINE) POWERED BY 3116 Engine SEBP2434 953C 2ZN   (1996)

UNDERCARRIAGE

IDLER GP
IDLER GP-FRONT
3W-7485 IDLER GP-FRONT
 

#SEBP24340280
 

3W-7485: IDLER GP-FRONT

3W-7485 IDLER GP-FRONT
S/N 2ZN1-1749
PART OF 8Y-5344 UNDERCARRIAGE AR
i00366539 SEBP2434
3W7485 IDLER GP-FRONT Parts scheme 3W7485 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-4434 [2] SPRING-RECOIL (INNER)  
2. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
3. 7P-7333 [2] SEAL AS  
4. 3W-7519 [2] PISTON AS  
5. 7P-9411 [4] PIN  
6. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
7. 7P-7245 [2] VALVE (TRACK ADJUSTMENT)  
8. 3W-7522 [2] GUARD  
9. 2J-6274 [2] SEAL-O-RING (9.12MM ID)  
10. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
11. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 7X-0466 [4] BOLT (1-14X2.25-IN)(1-14X2.25IN)  
13. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
14. 5G-9672 [2] PLATE  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 3W-7486 [2] BULKHEAD AS  
    (EACH INCLUDES)
17. 9G-9086 [2] BEARING  
18. 7P-7732 [4] GUARD  
19. 3J-2988 [4] SEAL-LIP TYPE  
20. 3W-7523 [2] SUPPORT  
21. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
22. 3W-7514 [2] RETAINER  
23. 7P-7733 [2] PIN  
24. 3W-7515 [2] CYLINDER AS  
    (EACH INCLUDES)
25. 7P-7736 [1] BUSHING  
26. 7K-9201 [4] SEAL-LIP TYPE  
27. 4S-7762 [2] SEAL-O-RING  
28. 8Y-1968 [2] YOKE AS  
    (EACH INCLUDES)
29. 7P-7235 [2] BUSHING  
30. 4J-8982 [8] SEAL-LIP TYPE  
31. 7P-7428 [4] PIN  
32. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
34. 7P-7911 [2] LINK AS (LH INNER/RH OUTER)  
  7P-7912 F [2] LINK AS (RH INNER/LH OUTER)  
    (EACH LINK AS INCLUDES)
35. 7P-7864 [1] SHAFT  
36. 7X-0563 [4] WASHER-HARD (12X35X8-MM THK)  
37. 5M-5000 [4] LOCK-PIN  
38. 2P-0347 [2] PLUG  
39. 1S-8947 [2] SEAL-O-RING  
40. 8G-0932 [8] SPRING-DISC  
41. 5G-9660 [2] GUARD AS (RH INNER/LH OUTER)  
  5G-9662 F [2] GUARD AS (LH INNER/RH OUTER)  
    (EACH GUARD AS INCLUDES)
42. 3W-8409 [2] BEARING  
43. 8T-4122 [24] WASHER-HARD (17X32X3.5-MM THK)  
44. 8T-4140 M [24] BOLT (M16X2X60-MM)  
45. 7K-9203 [8] SEAL-LIP TYPE  
46. 6J-2515 [12] BOLT-12 POINT HEAD (1/2-13X2.25-IN)  
47. 8G-0935 [4] CAP (FRONT IDLER)  
48. 7T-3501 [2] IDLER AS  
49. 5K-0305 [2] SHAFT-FRONT IDLER  
50. 7F-8267 [4] SEAL-O-RING  
51. 8T-4896 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
52. 9B-7237 [24] BOLT (3/8-16X1.25-IN)  
53. 9W-7216 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  1M-3097 [2] RING-SEALING  
54. 3P-8272 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
55. 8P-6652 [1] BEARING AS  
56. 9B-2289 [2] PIN  
57. 1H-6227 [4] SEAL-O-RING  
58. 7X-0311 [4] BOLT (7/16-14X2.25-IN)  
59. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
60. 8T-4244 M [4] NUT (M12X1.75-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24340281
 

152-8044: LINK AS-TRACK

152-8044 LINK AS-TRACK -ROTATING BUSHING TRACK
S/N 2ZN1-1749
SEALED & LUBRICATED
PART OF 187-2009, 187-2010 TRACK GP
AN ATTACHMENT
i00918756 SEBP2434
1528044 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-8070 [148] RING-THRUST  
2. 250-3988 [148] SEAL AS  
3. 106-1627 [1] LINK-MASTER (PIN END, RH)  
4. 106-1628 [1] LINK-MASTER (PIN END, LH)  
5. 165-1753 [1] JOINT AS-TRACK LINK (BUSHING END, LH)  
  106-1630 [1] LINK-TRACK MASTER (BUSHING END, LH)  
6. 165-1752 [1] JOINT AS-TRACK LINK (BUSHING END, RH)  
  106-1629 [1] LINK-TRACK MASTER (BUSHING END, RH)  
7. 156-4701 [37] PIN-TRACK  
8. 165-1768 [37] BUSHING-TRACK  
9. 165-1751 [36] JOINT AS-TRACK LINK (LH)  
    (EACH INCLUDES)
  106-1626 [1] LINK-TRACK (LH)  
10. 165-1750 [36] JOINT AS-TRACK LINK (RH)  
    (EACH INCLUDES)
  106-1625 [1] LINK-TRACK (RH)  
11. 5G-2247 [37] STOPPER-RUBBER  
  6Y-0473 [37] PLUG-CLEAR  
 

#SEBP24340282
 

154-3677: LINK AS-TRACK

154-3677 LINK AS-TRACK
S/N 2ZN1-1749
SEALED, LUBRICATED
PART OF 6Y-5187, 7Z-9772 TRACK GP
AN ATTACHMENT
i01050976 SEBP2434
1543677 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0473 [40] PLUG-CLEAR  
2. 5G-2247 [40] STOPPER-RUBBER  
3. 250-3990 [80] SEAL AS  
4. 7T-4636 [40] BUSHING-TERMINAL  
5. 160-7818 [40] PIN-TRACK  
6. 3P-3878 [80] RING-THRUST  
7. 7T-4539 [39] LINK-TRACK (RH)  
8. 7T-4540 [39] LINK-TRACK (LH)  
9. 7T-4541 [1] LINK-TRACK MASTER (PIN END, RH)  
10. 7T-4542 [1] LINK-TRACK MASTER (PIN END, LH)  
11. 7T-4544 [1] LINK-TRACK MASTER (BUSHING END, LH)  
12. 7T-4543 [1] LINK-TRACK MASTER (BUSHING END, RH)  
 

#SEBP24340283
 

235-2511: LINK AS-TRACK

235-2511 LINK AS-TRACK -SYSTEMONE
S/N 8TH1-99999; 2ZN1-1749
40-JOINTS. SEALED, LUBRICATED
PART OF 235-2513, 256-4873 TRACK GP
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS, SHOES
i02294751 SEBP2434
2352511 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-2501 [38] LINK-TRACK  
2. 235-2509 Y [20] LINK AS-TRACK BOX  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340284
 

243-0499: LINK AS-TRACK

243-0499 LINK AS-TRACK -SYSTEMONE
S/N 2ZN1-1749
37-JOINTS. SEALED, LUBRICATED
PART OF 243-0495, 244-4535, 256-4992, 256-4993 TRACK GP
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS, & SHOES
FIELD INSTALLATION
i02322983 SEBP2434
2430499 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-2501 [34] LINK-TRACK  
2. 235-2509 Y [17] LINK AS-TRACK BOX (LINK BOX)  
3. 243-0500 Y [1] LINK AS-TRACK BOX (LINK BOX, OFFSET)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340285
 

246-5753: LINK AS-TRACK

246-5753 LINK AS-TRACK -SYSTEMONE
S/N 2ZN1-1749
39-JOINTS. SEALED, LUBRICATED
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS, & SHOES
FIELD INSTALLATION
i02231004 SEBP2434
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  243-0500 Y [1] LINK AS-TRACK BOX (LINK BOX, OFFSET)  
  235-2509 Y [18] LINK AS-TRACK BOX (LINK BOX)  
  235-2501 [36] LINK-TRACK  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340286
 

7T-4637: LINK AS-TRACK

7T-4637 LINK AS-TRACK
S/N 2ZN1-1749
SEALED & LUBRICATED
PART OF 112-8140, 6Y-5187, 8E-5280, 8E-5281 TRACK GP
ALSO AN ATTACHMENT
i00422907 SEBP2434
7T4637 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-4539 [39] LINK-TRACK (RH)(RH)  
  7T-4540 [39] LINK-TRACK (LH)(LH)  
2. 7T-4541 [1] LINK-TRACK MASTER (PIN END, RH)(RH)  
  7T-4542 [1] LINK-TRACK MASTER (PIN END, LH)(LH)  
3. 7T-4636 [40] BUSHING-TERMINAL  
4. 7T-4543 [1] LINK-TRACK MASTER (BUSHING END, RH)(RH)  
  7T-4544 [1] LINK-TRACK MASTER (BUSHING END, LH)(LH)  
5. 6T-4058 [80] SEAL AS-TRACK  
6. 3P-3878 [80] RING-THRUST  
7. 6Y-0473 [40] PLUG-CLEAR  
  9G-1642 [40] STOPPER-RUBBER  
8. 3P-3880 [40] PIN-TRACK  
 

#SEBP24340287
 

235-2509: LINK AS-TRACK BOX

235-2509 LINK AS-TRACK BOX -SYSTEMONE
S/N 8TH1-99999; 2ZN1-1749
SEALED, LUBRICATED, FOR FIELD REPLACEMENT OF LINK BOX THAT IS MORE THAN 40% WORN, ORDER 339-0264 LINK AS, FOR FIELD REPLACEMENT OF LINK BOX THAT IS LESS THAN 40% WORN, ORDER 351-0959 LINK AS
PART OF 235-2511, 243-0499, 246-5753 LINK AS-TRACK, 243-0500 LINK AS-TRACK BOX
i02515153 SEBP2434
2352509 LINK AS-TRACK BOX Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-2501 [2] LINK-TRACK  
2. [2] CARTRIDGE AS-TRACK LINK  
    (EACH INCLUDES)
  6Y-0473 [2] PLUG-CLEAR  
  9G-1642 [2] STOPPER-RUBBER  
 

#SEBP24340288
 

243-0500: LINK AS-TRACK BOX

243-0500 LINK AS-TRACK BOX -LINK BOX, OFFSET
S/N 2ZN1-1749
SEALED, LUBRICATED, FOR FIELD REPLACEMENT OF LINK BOX THAT IS MORE THAN 40% WORN, ORDER 264-9769 LINK AS, FOR FIELD REPLACEMENT OF LINK BOX THAT IS LESS THAN 40% WORN, ORDER 298-2724 LINK AS
PART OF 243-0499, 246-5753 LINK AS-TRACK
i02515864 SEBP2434
2430500 LINK AS-TRACK BOX Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-2509 Y [1] LINK AS-TRACK BOX  
2. [1] CARTRIDGE AS-TRACK LINK  
  6Y-0473 [2] PLUG-CLEAR  
  9G-1642 [2] STOPPER-RUBBER  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  Y   SEPARATE ILLUSTRATION
 

#SEBP24340289
 

264-9764: LINK AS-TRACK BOX

264-9764 LINK AS-TRACK BOX -LINK BOX
S/N 2ZN1-1749
70% WORN. SEALED, LUBRICATED
PART OF 264-9769 LINK AS-TRACK BOX
FIELD REPLACEMENT FOR @@@@@235-2509@@@@@, LINK AS THAT IS MORE THAN 40% WORN, @@@@@298-2723@@@@@, LINK AS THAT IS MORE THAN 40% WORN
FIELD INSTALLATION
i02515161 SEBP2434
2649764 LINK AS-TRACK BOX Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 298-2722 [2] CARTRIDGE AS-TRACK LINK  
    (EACH INCLUDES)
  6Y-0473 [2] PLUG-CLEAR  
  9G-1642 [2] STOPPER-RUBBER  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

Information:

Operation and Maintenance Manual
Idler Swing Link - Lubricate
953C Track-Type Loader
Front Idler Position - Check
953C Track-Type Loader
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
A Stronger Recoil Spring Prevents Track Jumping{4158}
A Stronger Recoil Spring Prevents Track Jumping{4158}
Installation of Center Tread Idlers with SystemOne® Track{4159, 4170}
Installation of Center Tread Idlers with SystemOne® Track{4159, 4170}
Service Letter-NACD
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Service Letter-Australia
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Service Letter-CFEL
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Service Letter-CSARL
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Service Letter-Americas
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Technical Information Bulletin
Eliminate the Kevlar Rope Seal in Waste Handling Arrangement idlers.
Eliminate the Kevlar Rope Seal in Waste Handling Arrangement idlers.
Specifications
Front Idler and Recoil Spring
953C Track-Type Loader Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Service Letter-China
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Service Letter-Asia
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Information Release Memo
953C, 953B CAT® SystemOne� UNDERCARRIAGE
953C, 953B CAT® SystemOne� UNDERCARRIAGE
Service Letter-APD
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
Product Support Program For Replacing Idler Shafts On Certain 953 Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IDLER SHAFTS ON CERTAIN 953B AND 953C TRACK TYPE LOADERS
Disassembly and Assembly
Front Idler and Yoke - Remove
953C Track-Type Loader Power Train
Front Idler and Yoke - Disassemble
953C Track-Type Loader Power Train
Front Idler and Yoke - Assemble
953C Track-Type Loader Power Train
Front Idler and Yoke - Install
953C Track-Type Loader Power Train
Service Magazine
Adjustment of the Front Idler on Track-Type Loaders {4159}
2001/10/22
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Caterpillar Parts SIS Catalog 953C :

GUARD GP-TRACK ROLLER
8Y-2275 GUARD GP-TRACK ROLLER
GUARD GP-TRACK GUIDE
3W-7581 GUARD GP-TRACK GUIDE
FRAME GP-TRACK ROLLER
8Y-1951 FRAME GP-TRACK ROLLER
BAR GP-EQUALIZER
3W-7561 BAR GP-EQUALIZER
BAR GP-EQUALIZER
346-2872 BAR GP-EQUALIZER
SUPPORT GP-PLATFORM
110-1393 SUPPORT GP-PLATFORM
STEP GP
118-0333 STEP GP
HITCH GP
8Y-9287 HITCH GP
LINK AS-TRACK
152-8044 LINK AS-TRACK
LINK AS-TRACK
154-3677 LINK AS-TRACK
LINK AS-TRACK
235-2511 LINK AS-TRACK
LINK AS-TRACK
243-0499 LINK AS-TRACK
246-5753 LINK AS-TRACK
LINK AS-TRACK
7T-4637 LINK AS-TRACK
LINK AS-TRACK BOX
235-2509 LINK AS-TRACK BOX
LINK AS-TRACK BOX
243-0500 LINK AS-TRACK BOX

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.