164-1988 LINES GP-PUMP S/N 2JR1-UP BUTT-N-TOP HEX LINKAGE PART OF 163-3317 HYDRAULIC AR-LOG LOADER AN ATTACHMENT 325B L

HYDRAULIC SYSTEM

LINES GP-PUMP

0. 164-1988 LINES GP-P

LINES GP-RETURN

1. 130-2747 LINES GP-R
2. 130-2747 LINES GP-R
3. 137-0120 LINES GP-R
4. 187-8523 LINES GP-R
5. 111-6500 LINES GP-R
6. 111-6500 LINES GP-R
7. 111-6500 LINES GP-R

LINES GP-ROTATOR

8. 133-1565 LINES GP-R

LINES GP-STICK

9. 119-2548 LINES GP-S
0. INFORMATION

EXCAVATOR 325B L EXCAVATOR 2JR
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2435 325B L 2JR (1996)

HYDRAULIC SYSTEM

LINES GP-PUMP

111-6501 LINES GP-PUMP

143-5434 LINES GP-PUMP

146-0723 LINES GP-PUMP

164-1987 LINES GP-PUMP

164-1988 LINES GP-PUMP

#SEBP24350580

164-1988: LINES GP-PUMP

LINES GP-PUMP

164-1988 LINES GP-PUMP
S/N 2JR1-UP
BUTT-N-TOP HEX LINKAGE
PART OF 163-3317 HYDRAULIC AR-LOG LOADER
AN ATTACHMENT

i00957793 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	143-5436 I	[1]	HOSE AS
2.	6V-0397	[2]	FLANGE-HALF
3.	4J-0520	[1]	SEAL-O-RING
4.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
5.	6V-9832	[1]	CAP
6.	164-4452 I	[1]	HOSE AS
7.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)
8.	5P-7468	[1]	CLIP (SLOT)
9.	1P-4577	[2]	FLANGE-HALF
10.	8T-4196 M	[12]	BOLT (M10X1.5X35-MM)
11.	1P-4578	[2]	FLANGE-HALF
12.	4J-0522	[5]	SEAL-O-RING
13.	126-2172	[1]	PLATE
14.	6V-6707	[1]	SEAL-O-RING
15.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
16.	131-9750	[1]	SCREEN AS (HYDRAULIC TANK)(HYDRAULIC TANK)
17.	5P-7469	[1]	CLIP (TAB)
18.	164-4454 I	[1]	HOSE AS
19.	174-4312	[1]	SWITCH AS-PRESSURE (MANUAL SHUTOFF VALVE)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(.2M)
	8T-5677 D		SLEEVE (.6M)
	102-8803 J	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & PART MARKED J)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	3E-3371 J	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
20.	3J-1907	[1]	SEAL-O-RING
21.	162-7744 Y	[1]	VALVE GP-RELIEF
22.	7H-3171	[2]	PLUG-PIPE
23.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
24.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
25.	164-4455 I	[1]	HOSE AS
26.	164-4456 I	[1]	HOSE AS
27.	164-4457 I	[1]	HOSE AS
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	159-7965	[2]	FLANGE
30.	132-7443	[1]	VALVE GP-MANUAL (MANUAL SHUTOFF)
	119-1353	[1]	HANDLE
	155-7685	[1]	PLATE
	155-7686 M	[1]	BOLT (M5X0.8X12-MM)
31.		[1]	FLANGE
32.	6V-1874	[1]	GROMMET (31-MM ID)
33.	8T-4244 M	[1]	NUT (M12X1.75-THD)
34.	162-2423	[1]	PLATE
35.	164-4458	[1]	SHEET
36.	2P-1293	[1]	LOCKNUT (1-3/16-12-THD)
37.	5P-1076	[3]	WASHER-HARD (13.5X30X4-MM THK)
38.	8T-4194 M	[3]	BOLT (M12X1.75X50-MM)
39.	8T-4956 M	[1]	BOLT (M12X1.75X35-MM)
40.	8T-8441 M	[8]	BOLT-SOCKET HEAD (M12X1.75X25-MM)
41.	101-7404 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
42.	3P-1823	[1]	ADAPTER-PIPE
43.	7J-8611	[1]	ELBOW-PIPE
44.	6V-3966	[1]	FITTING AS
45.	6V-0852	[1]	CAP-DUST (RELIEF VALVE)
46.	148-8449	[1]	TEE AS-SWIVEL
	6V-9746	[2]	SEAL-O-RING
	6V-9839	[1]	TEE-SWIVEL
47.	164-5574	[1]	TEE AS
	3D-2824	[1]	SEAL-O-RING
	6V-8784	[1]	TEE-FACE SEAL
	6V-9746	[2]	SEAL-O-RING
48.	148-8455	[1]	UNION AS
	6V-8997	[1]	UNION
	6V-9746	[2]	SEAL-O-RING
49.	150-4049	[1]	ELBOW AS
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	8T-4149	[1]	ELBOW
50.	148-8360	[1]	ELBOW AS
	6V-9182	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
51.	148-8442	[1]	TEE AS
	6V-9746	[2]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	8T-1685	[1]	TEE
52.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
	D		ORDER BY THE METER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350581

130-2747: LINES GP-RETURN

LINES GP-RETURN

130-2747 LINES GP-RETURN
S/N 2JR1-UP
PART OF 140-8704 SPECIAL AR-MATERIAL HANDLER, 129-8487 VALVE AR-CHECK & RELIEF
Type 1
AN ATTACHMENT

i00500818 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-2881 Y	[1]	VALVE GP-CHECK
2.	130-2748	[1]	BLOCK
3.	130-2752	[1]	TUBE AS
4.	130-2753	[1]	TUBE AS
5.	130-2754	[1]	TUBE AS
6.	4I-7778 I	[2]	HOSE AS
7.	7I-0993 I	[1]	HOSE AS
8.	130-2750 I	[2]	HOSE AS
9.	130-3080	[1]	BRACKET
10.	7Y-3700	[1]	FLANGE
11.	6V-8785	[1]	TEE
12.	6V-9854	[1]	ELBOW (SWIVEL)
13.	6V-8636	[2]	CONNECTOR
14.	6V-8637	[4]	CONNECTOR
15.	6V-8714	[1]	CONNECTOR
16.	9S-8008	[2]	PLUG (1-1/16-12-THD)
17.	3D-2824	[7]	SEAL-O-RING
18.	3J-1907	[2]	SEAL-O-RING
19.	4J-5267	[3]	SEAL-O-RING
20.	5K-9090	[5]	SEAL-O-RING
21.	7M-8485	[1]	SEAL-O-RING
22.	1P-3703	[1]	SEAL-RECTANGULAR
23.	1P-3704	[1]	SEAL-RECTANGULAR
24.	6V-8397	[2]	SEAL-O-RING
25.	6V-9746	[4]	SEAL-O-RING
26.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
27.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
28.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
29.	105-3479 M	[4]	BOLT-SOCKET HEAD (M10X1.5X90-MM)
30.	105-3483 M	[1]	BOLT-SOCKET HEAD (M10X1.5X70-MM)
31.	7Y-4868	[2]	CLIP
32.	8T-4244 M	[2]	NUT (M12X1.75-THD)
33.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	7K-1181	[18]	STRAP-CABLE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350582

130-2747: LINES GP-RETURN

LINES GP-RETURN

130-2747 LINES GP-RETURN
S/N 2JR1-UP
PART OF 129-8487 VALVE AR-CHECK & RELIEF
Type 2
AN ATTACHMENT

i00500820 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-8353	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
2.	130-2748	[1]	BLOCK
3.	130-2752	[1]	TUBE AS
4.	130-2753	[1]	TUBE AS
5.	130-2754	[1]	TUBE AS
6.	4I-7778 I	[2]	HOSE AS
7.	160-8639 I	[1]	HOSE AS
8.	145-3396 I	[2]	HOSE AS
9.	130-3080	[1]	BRACKET
10.	142-3922 Y	[1]	VALVE GP-LOAD CONTROL (BOOM)
11.	148-8431	[1]	TEE AS
	5K-9090	[2]	SEAL-O-RING
	6V-8785	[1]	TEE
	7M-8485	[1]	SEAL-O-RING
12.	148-8317	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	6V-8714	[1]	CONNECTOR
13.	148-8327	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
14.	148-8336	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
15.	148-8335	[1]	CONNECTOR AS
	5K-9090	[1]	SEAL-O-RING
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING
16.	148-8409	[2]	PLUG AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	9S-8008	[1]	PLUG (1-1/16-12-THD)
18.	4J-5267	[3]	SEAL-O-RING
21.	1P-3704	[1]	SEAL-RECTANGULAR (45MM DIA)
23.	6V-9746	[2]	SEAL-O-RING
24.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
25.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
26.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
27.	105-3479 M	[4]	BOLT-SOCKET HEAD (M10X1.5X90-MM)
28.	105-3483 M	[1]	BOLT-SOCKET HEAD (M10X1.5X70-MM)
29.	7Y-4868	[2]	CLIP
30.	8T-4244 M	[2]	NUT (M12X1.75-THD)
31.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
33.	7K-1181	[6]	STRAP-CABLE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350583

137-0120: LINES GP-RETURN

LINES GP-RETURN

137-0120 LINES GP-RETURN
S/N 2JR1-UP
PART OF 140-8704 SPECIAL AR-MATERIAL HANDLER
AN ATTACHMENT

i00781434 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-3412	[1]	TUBE AS
2.	6C-6302 I	[1]	HOSE AS
3.	7I-7595 I	[1]	HOSE AS
4.	130-3428	[2]	CLAMP
5.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
6.	8T-4244 M	[2]	NUT (M12X1.75-THD)
7.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	148-8429	[1]	TEE AS
	5K-9090	[2]	SEAL-O-RING
	6V-9840	[1]	TEE-SWIVEL
9.	148-8352	[1]	ELBOW AS
	5K-9090	[1]	SEAL-O-RING
	6V-9854	[1]	ELBOW (SWIVEL)
10.	5K-9090	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP24350584

187-8523: LINES GP-RETURN

LINES GP-RETURN

187-8523 LINES GP-RETURN
S/N 2JR1-UP
STICK LOWERING CONTROL
PART OF 140-8704 SPECIAL AR-MATERIAL HANDLER
AN ATTACHMENT

i01251438 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-3412	[1]	TUBE AS
2.	6C-6302 I	[1]	HOSE AS
3.	7I-7595 I	[1]	HOSE AS
4.	130-3428	[2]	CLAMP
5.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
6.	8T-4244 M	[2]	NUT (M12X1.75-THD)
7.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	148-8429	[1]	TEE AS
	5K-9090	[2]	SEAL-O-RING
	6V-9840	[1]	TEE-SWIVEL
9.	148-8352	[1]	ELBOW AS
	5K-9090	[1]	SEAL-O-RING
	6V-9854	[1]	ELBOW (SWIVEL)
10.	5K-9090	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP24350585

111-6500: LINES GP-RETURN & FILTER

LINES GP-RETURN & FILTER

111-6500 LINES GP-RETURN & FILTER
S/N 2JR1-1702
PART OF 123-5681, 131-5857 HYDRAULIC AR

i00481591 SEBP2435

1116500 LINES GP-RETURN & FILTER Parts scheme

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
2.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	4J-0527	[1]	SEAL-O-RING
4.	123-2694	[1]	PIPE AS
5.	5K-9090	[3]	SEAL-O-RING
6.	7M-8485	[3]	SEAL-O-RING
7.	6V-8635	[2]	CONNECTOR
8.	6V-9854	[1]	ELBOW (SWIVEL)
9.	113-6721 Y	[1]	VALVE GP-CHECK
10.	4J-0524	[3]	SEAL-O-RING
11.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
12.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
13.	130-6979	[1]	PIPE AS
14.	7Y-5237	[2]	U-BOLT
15.	096-4883 M	[6]	LOCKNUT (M10X1.5-THD)
16.	123-2700	[1]	HOSE
17.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
18.	123-2680	[1]	SUPPORT
19.	119-2513	[1]	SUPPORT
20.	119-2505	[1]	PIPE AS
21.	119-2504	[1]	PIPE AS
22.	119-2489	[2]	HOSE
23.	113-6666 I	[1]	HOSE AS
24.	094-6526	[1]	VALVE AS-CHECK
25.	4J-0526	[1]	SEAL-O-RING
26.	5P-4868	[2]	CLAMP-HOSE
27.	5P-0597	[4]	CLAMP-HOSE
28.	7Y-5247 M	[1]	U-BOLT (M10X1.5-THD)
29.	9S-4181	[1]	PLUG (1-5/16-12-THD)
30.	8T-4178 M	[4]	BOLT (M10X1.5X90-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350586

111-6500: LINES GP-RETURN & FILTER

LINES GP-RETURN & FILTER

111-6500 LINES GP-RETURN & FILTER
S/N 2JR1703-2803
PART OF 131-5857 HYDRAULIC AR

i00847355 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
2.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	4J-0527	[1]	SEAL-O-RING
4.	123-2694	[1]	PIPE AS
5.	148-8335	[2]	CONNECTOR AS
			(EACH INCLUDES)
	5K-9090	[1]	SEAL-O-RING
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING
6.	148-8352	[1]	ELBOW AS
	5K-9090	[1]	SEAL-O-RING
	6V-9854	[1]	ELBOW (SWIVEL)
7.	164-4180	[1]	PLUG AS
	7M-8485	[1]	SEAL-O-RING
	9S-4181	[1]	PLUG (1-5/16-12-THD)
9.	142-5516 Y	[1]	VALVE GP-CHECK (SLOW RETURN)
10.	4J-0524	[3]	SEAL-O-RING
11.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
12.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
13.	130-6979	[1]	PIPE AS
14.	7Y-5237	[2]	U-BOLT
15.	096-4883 M	[6]	LOCKNUT (M10X1.5-THD)
16.	123-2700	[1]	HOSE
17.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
18.	123-2680	[1]	SUPPORT
19.	119-2513	[1]	SUPPORT
20.	119-2505	[1]	PIPE AS
21.	119-2504	[1]	PIPE AS
22.	4I-1607 E		HOSE (190 CM)
23.	113-6666 I	[1]	HOSE AS
24.	094-6526	[1]	VALVE AS-CHECK
25.	4J-0526	[1]	SEAL-O-RING
26.	8T-4984	[2]	CLAMP-HOSE
27.	8T-6703	[4]	CLAMP-HOSE
28.	7Y-5247 M	[1]	U-BOLT (M10X1.5-THD)
30.	8T-4178 M	[4]	BOLT (M10X1.5X90-MM)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350587

111-6500: LINES GP-RETURN & FILTER

LINES GP-RETURN & FILTER

111-6500 LINES GP-RETURN & FILTER
S/N 2JR2804-UP
PART OF 131-5857 HYDRAULIC AR

i01771611 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
2.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	4J-0527	[1]	SEAL-O-RING
4.	123-2694	[1]	PIPE AS
5.	148-8335	[2]	CONNECTOR AS
			(EACH INCLUDES)
	5K-9090	[1]	SEAL-O-RING
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING
6.	148-8352	[1]	ELBOW AS
	5K-9090	[1]	SEAL-O-RING
	6V-9854	[1]	ELBOW (SWIVEL)
7.	164-4180	[1]	PLUG AS
	7M-8485	[1]	SEAL-O-RING
	9S-4181	[1]	PLUG (1-5/16-12-THD)
9.	184-3831 CY	[1]	VALVE GP-CHECK (SLOW RETURN)
10.	4J-0524	[3]	SEAL-O-RING
11.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
12.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
13.	130-6979	[1]	PIPE AS
14.	7Y-5237	[2]	U-BOLT
15.	096-4883 M	[6]	LOCKNUT (M10X1.5-THD)
16.	123-2700	[1]	HOSE
17.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
18.	123-2680	[1]	SUPPORT
19.	119-2513	[1]	SUPPORT
20.	119-2505	[1]	PIPE AS
21.	119-2504	[1]	PIPE AS
22.	229-1019	[2]	HOSE
23.	113-6666 I	[1]	HOSE AS
24.	094-6526	[1]	VALVE AS-CHECK (HYDRAULIC OIL COOLER BYPASS)
25.	4J-0526	[1]	SEAL-O-RING
26.	8T-4984	[2]	CLAMP-HOSE
27.	8T-6703	[4]	CLAMP-HOSE
28.	7Y-5247 M	[1]	U-BOLT (M10X1.5-THD)
30.	8T-4178 M	[4]	BOLT (M10X1.5X90-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350588

133-1565: LINES GP-ROTATOR

LINES GP-ROTATOR

133-1565 LINES GP-ROTATOR
S/N 2JR1-UP
PART OF 133-8709 HYDRAULIC AR-GRAPPLE, 149-8655, 151-2731, 151-2732, 196-2370, 196-2372 HYDRAULIC AR-GRAPPLE ROTATOR
AN ATTACHMENT

i00500268 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-3292 I	[1]	HOSE AS
2.	1P-4577	[2]	FLANGE-HALF
3.	4J-0520	[1]	SEAL-O-RING
4.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
5.	136-6512 I	[1]	HOSE AS
6.	5P-7468	[2]	CLIP (SLOT)
7.	5P-7469	[2]	CLIP (TAB)
8.	6V-1874	[2]	GROMMET (31-MM ID)
9.	1P-4576	[2]	FLANGE-HALF
10.	8T-4196 M	[16]	BOLT (M10X1.5X35-MM)
11.	1P-4578	[2]	FLANGE-HALF
12.	4J-0522	[2]	SEAL-O-RING
13.	126-2172	[1]	PLATE
14.	6V-6707	[1]	SEAL-O-RING
15.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
16.	131-9750	[1]	SCREEN AS (HYDRAULIC TANK)
17.	137-8716	[1]	SUPPORT
18.	127-1647	[1]	ELBOW
19.	148-8340	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8639	[1]	CONNECTOR
20.	148-8457	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8398	[2]	SEAL-O-RING
	6V-8995	[1]	UNION (STRAIGHT)
21.	148-8418	[2]	REDUCER AS
			(EACH INCLUDES)
	6V-8398	[1]	SEAL-O-RING
	6V-8942	[1]	REDUCER-O-RING
22.	6V-8556	[2]	NUT (1-3/16-12-THD)
23.	148-8364	[1]	ELBOW AS
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
24.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
25.	6V-9169	[2]	NUT (13/16-16-THD)
26.	139-1596	[1]	PLATE
27.	8T-0348 M	[1]	BOLT-SOCKET HEAD (M16X2X50-MM)
28.	3E-4356	[1]	WASHER-HARD (17.5X30X6-MM THK)
29.	7X-2553 M	[2]	BOLT (M16X2X40-MM)
30.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
31.	148-8392	[1]	ELBOW AS
	6V-9746	[1]	SEAL-O-RING
	6V-9853	[1]	ELBOW
32.	148-8324	[1]	CONNECTOR AS
	3K-0360	[1]	SEAL-O-RING
	6V-9746	[1]	SEAL-O-RING
	6V-9874	[1]	CONNECTOR (STRAIGHT)
35.	141-8203	[1]	FLANGE
36.	8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
37.	8T-4223	[9]	WASHER-HARD (13.5X25.5X3-MM THK)
38.	8T-4244 M	[4]	NUT (M12X1.75-THD)
39.	4Z-5913 Y	[1]	VALVE GP-CONTROL (WORK TOOL)
40.	4T-2958 I	[1]	HOSE AS
41.	152-9086 I	[2]	HOSE AS
42.	107-1418 I	[2]	HOSE AS
43.	1V-7753	[1]	SPACER (0.546X0.841X1.75-IN THK)
44.	8T-4648 M	[1]	BOLT (M12X1.75X70-MM)
46.	4J-5267	[1]	SEAL-O-RING
47.	087-4480 I	[1]	HOSE AS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP24350589

119-2548: LINES GP-STICK

LINES GP-STICK

119-2548 LINES GP-STICK
S/N 2JR1-UP
FOR 3.2M STICK
PART OF 117-4118, 132-8796 STICK AR-HOE
AN ATTACHMENT

i00519259 SEBP2435

For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8885 I	[2]	HOSE AS
2.	8T-9403	[4]	FLANGE-HALF
3.	1P-3702	[2]	SEAL-RECTANGULAR
4.	8T-5436 M	[4]	BOLT (M10X1.5X130-MM)
5.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
6.	5I-4188	[1]	BLOCK
7.	1P-3703	[1]	SEAL-RECTANGULAR
8.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART