AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

265-3034 BUCKET GP-HEAVY DUTY ROCK -C/CB FAMILY S/N 2JR1-UP 610-M (24-IN) WIDE X 0.49-CU M (0.64-CU YD) CAPACITY. K-100 ADAPTERS, (3X) AN ATTACHMENT 325B L


WORK TOOLS
BUCKET GP
COUPLER GP-QUICK
GRAPPLE GP
GROUND ENGAGING TOOLS (G.E.T.)

EXCAVATOR 325B L EXCAVATOR 2JR
 325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2435 325B L 2JR   (1996)

WORK TOOLS

BUCKET GP
BUCKET GP-HEAVY DUTY
265-3003 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
346-0963 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY ROCK
265-3034 BUCKET GP-HEAVY DUTY ROCK
BUCKET GP-HEAVY DUTY ROCK
265-3035 BUCKET GP-HEAVY DUTY ROCK
 

#SEBP24351320
 

265-3034: BUCKET GP-HEAVY DUTY ROCK

265-3034 BUCKET GP-HEAVY DUTY ROCK -C/CB FAMILY
S/N 2JR1-UP
610-M (24-IN) WIDE X 0.49-CU M (0.64-CU YD) CAPACITY. K-100 ADAPTERS, (3X)
AN ATTACHMENT
i02679233 SEBP2435
2653034 BUCKET GP-HEAVY DUTY ROCK Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 273-1257 [1] BUCKET AS-HEAVY DUTY ROCK  
2. 276-5760 [1] EDGE AS  
2A. 220-9104 [3] ADAPTER-TIP (K-100, 2-STRAP, CENTER)  
2B. 8P-9770 [1] PLATE  
3. 277-3993 [1] PLATE AS-BOX  
4. [2] PLATE-WEAR  
5. 273-3426 [5] PLATE-WEAR  
6. 273-3429 [3] PLATE-WEAR  
7. 277-3996 [2] PLATE-WEAR  
8. 273-3423 [1] PLATE-REINFORCEMENT  
9. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
10. 244-8504 [2] PIN AS  
11. 7X-2552 M [2] BOLT (M16X2X30-MM)  
12. 7Y-3110 [2] WASHER-SPECIAL (17X65X6-MM THK)  
  M   METRIC PART
 

#SEBP24351321
 

265-3035: BUCKET GP-HEAVY DUTY ROCK

265-3035 BUCKET GP-HEAVY DUTY ROCK -HEAVY-DUTY-ROCK, C/CB-FAMILY
S/N 2JR1-UP
914-MM (36-IN) WIDE X 0.85-CU M (1.12-CU YD) CAPACITY. K-100 ADAPTERS, (4X)
AN ATTACHMENT
i02679236 SEBP2435
2653035 BUCKET GP-HEAVY DUTY ROCK Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 273-1258 [1] BUCKET AS-HEAVY DUTY ROCK (C/CB-FAMILY, RECESSED PIN)  
2. 240-9595 [1] EDGE AS  
2A. 220-9104 [4] ADAPTER-TIP (K-100, 2-STRAP, CENTER)  
2B. 8P-9770 [1] PLATE  
3. 277-3979 [1] PLATE AS-BOX  
4. [2] PLATE-WEAR  
5. 262-3843 [5] PLATE-WEAR  
6. 262-3847 [3] PLATE-WEAR  
7. 277-3999 [2] PLATE-WEAR  
8. 262-3839 [1] PLATE-REINFORCEMENT  
9. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
10. 244-8504 [2] PIN AS  
11. 7X-2552 M [2] BOLT (M16X2X30-MM)  
12. 7Y-3110 [2] WASHER-SPECIAL (17X65X6-MM THK)  
13. [2] PLATE  
14. 8C-8992 M [12] BOLT-LOCKING (M12X1.75X30-MM)  
15. 7D-1649 [12] WASHER-HARD (13.5X32X5-MM THK)  
  M   METRIC PART
 

#SEBP24351322
 

318-8207: COUPLER AR-QUICK

318-8207 COUPLER AR-QUICK
S/N 2JR1-UP
FOR USE WITH 325B EXCAVATOR WITH "C" AND "CB" LINKAGE
AN ATTACHMENT
i02881648 SEBP2435
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] COUPLER GP-QUICK  
   
  268-4531 [1] FILM-INSTRUCTION (COUPLER OPERATION)  
  268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  268-8872 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  160-8290 [2] SHIM (1-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24351323
 

297-6983: COUPLER GP-QUICK

297-6983 COUPLER GP-QUICK
S/N 2JR1-UP
PART OF 318-8207 COUPLER AR-QUICK
AN ATTACHMENT
i02881453 SEBP2435
2976983 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 274-5997 Y [1] CYLINDER GP-HYDRAULIC  
2. 274-5995 [1] HOOK  
3. 274-5992 [1] PIN  
4. 274-5993 [1] PIN  
5. 274-5994 [1] PIN  
6. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
7. 275-0497 [1] SPRING (INCLUDES BOLTS, WASHERS)  
8. 171-5956 [1] BEARING  
9. 274-5999 [1] BAR  
10. 274-5998 [1] BAR  
11. 4I-9426 [2] RING-RETAINING  
12. 274-6001 [4] CLIP  
13. 273-4159 [1] PLATE-RETAINING  
14. 118-4140 M [2] SCREW (M5X0.8X19-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24351324
 

397-8274: COUPLER GP-QUICK

397-8274 COUPLER GP-QUICK
S/N 2JR1-UP
FOR USE WITH "C" LINKAGE
AN ATTACHMENT
i06136705 SEBP2435
3978274 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-8290 [2] SHIM (1-MM THK)  
2. 1P-2807 [1] FILM-IDENTIFICATION (LIFT EYE LOCATION)  
3. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 156-0161 [2] PIN  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 172-8482 [2] COLLAR  
7. 172-8483 [2] BOLT  
8. 381-3946 [1] COVER AS  
  161-4130 [1] PLATE-IDENTIFICATION (CAT)  
9. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 425-3930 [1] WEDGE AS  
11. 425-3932 [1] PLATE  
12. 125-7877 [2] PIN  
13. 160-8302 [12] WASHER-SPRING  
14. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
  M   METRIC PART
 

#SEBP24351325
 

150-4578: GRAPPLE GP

150-4578 GRAPPLE GP -GH52
S/N 2JR1-UP
AN ATTACHMENT
i00889129 SEBP2435
1504578 GRAPPLE GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3773 [1] HEAD AS-GRAPPLE  
  7K-0078 [2] BUSHING  
2. 133-3774 [1] HEAD AS-GRAPPLE  
3. 200-2100 Y [1] ROTATOR GP-HYDRAULIC  
4. 133-3772 [1] CROSSHEAD AS  
5. 133-1801 [1] LEG-GRAPPLE  
6. 133-1802 [1] LEG-GRAPPLE  
7. 150-4569 Y [2] CYLINDER GP-HYDRAULIC  
8. 135-0464 I [1] HOSE AS  
9. 122-9502 [2] PIN  
10. 122-9504 [1] PIN  
11. 133-5337 [1] PIN  
12. 122-9500 [2] PIN  
13. 133-5338 [1] PIN AS  
14. 125-2117 M [6] BOLT-SOCKET HEAD (M24X3X70-MM)  
15. 9X-2404 M [6] BOLT-SOCKET HEAD (M20X2.5X90-MM)  
16. 8T-3282 [6] WASHER-HARD (22X35X3.5-MM THK)  
17. 133-3775 [2] BLOCK-PORT  
18. 6V-4249 M [8] BOLT (M10X1.5X50-MM)  
19. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
20. 4J-0522 [2] SEAL-O-RING  
21. 126-7635 [4] ADAPTER AS  
    (EACH INCLUDES)
  194-5333 [1] KIT-SERVICE  
22. 6V-8398 [6] SEAL-O-RING  
23. 3K-0360 [6] SEAL-O-RING  
24. 6V-8639 [4] CONNECTOR  
25. 133-5336 I [2] HOSE AS  
26. 123-2913 [5] PIN-KEEPER  
27. 9X-8885 [5] BOLT (3/4-10X2.25-IN)  
28. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
29. 8T-7913 [2] ADAPTER  
30. 165-8827 I [1] HOSE AS  
31. 6V-0407 [2] SEAL-BONDED  
32. 6V-9830 [2] CAP (ORFS)  
33. 8T-7916 [2] ADAPTER  
34. 6V-9004 [2] ELBOW  
35. 6V-0409 [2] SEAL-BONDED  
36. 3D-2824 [2] SEAL-O-RING  
37. 6V-9746 [2] SEAL-O-RING  
38. 6V-9832 [2] CAP  
39. 1A-5405 [4] BOLT (5/8-11X5-IN)  
40. 2H-3789 [4] NUT (5/8-11-THD)  
41. 6V-9002 [2] ELBOW  
42. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24351326
 

150-4579: GRAPPLE GP

150-4579 GRAPPLE GP -GH60
S/N 2JR1-UP
FOR USE WITH HEEL-BOOM OPTION
AN ATTACHMENT
i00889004 SEBP2435
1504579 GRAPPLE GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3773 [1] HEAD AS-GRAPPLE  
  7K-0078 [2] BUSHING  
2. 133-3774 [1] HEAD AS-GRAPPLE  
3. 200-2100 Y [1] ROTATOR GP-HYDRAULIC  
4. 133-3772 [1] CROSSHEAD AS  
5. 122-9495 [1] LEG-GRAPPLE  
6. 122-9496 [1] LEG-GRAPPLE  
7. 150-4569 Y [2] CYLINDER GP-HYDRAULIC  
8. 135-0464 I [1] HOSE AS  
9. 122-9502 [2] PIN  
10. 122-9504 [1] PIN  
11. 122-9494 [1] PIN  
12. 122-9500 [2] PIN  
13. 133-5338 [1] PIN AS  
14. 125-2117 M [6] BOLT-SOCKET HEAD (M24X3X70-MM)  
15. 9X-2404 M [6] BOLT-SOCKET HEAD (M20X2.5X90-MM)  
16. 8T-3282 [6] WASHER-HARD (22X35X3.5-MM THK)  
17. 133-3775 [2] BLOCK-PORT  
18. 6V-4249 M [8] BOLT (M10X1.5X50-MM)  
19. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
20. 4J-0522 [2] SEAL-O-RING  
21. 126-7635 [4] ADAPTER AS  
    (EACH INCLUDES)
  194-5333 [1] KIT-SERVICE  
22. 6V-8398 [6] SEAL-O-RING  
23. 3K-0360 [6] SEAL-O-RING  
24. 6V-8639 [4] CONNECTOR  
25. 133-5336 I [2] HOSE AS  
26. 123-2913 [5] PIN-KEEPER  
27. 9X-8885 [5] BOLT (3/4-10X2.25-IN)  
28. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
29. 8T-7913 [2] ADAPTER  
30. 165-8827 I [1] HOSE AS  
31. 6V-0407 [2] SEAL-BONDED  
32. 6V-9830 [2] CAP (ORFS)  
33. 8T-7916 [2] ADAPTER  
34. 6V-9004 [2] ELBOW  
35. 6V-0409 [2] SEAL-BONDED  
36. 3D-2824 [2] SEAL-O-RING  
37. 6V-9746 [2] SEAL-O-RING  
38. 6V-9832 [2] CAP  
39. 1A-5405 [4] BOLT (5/8-11X5-IN)  
40. 2H-3789 [4] NUT (5/8-11-THD)  
41. 6V-9002 [2] ELBOW  
42. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24351327
 

132-5389: HEEL GP

132-5389 HEEL GP
S/N 2JR1-UP
PART OF 130-8617, 163-3163, 177-7551, 193-9279 LINKAGE AR
AN ATTACHMENT
i00496428 SEBP2435
1325389 HEEL GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
2. 7Y-2497 B [1] SHIM (1.6-MM THK)  
3. 7Y-2498 B [1] SHIM (1.6-MM THK)  
4. 8C-9378 [1] NUT (2-12-THD)  
5. 118-5196 [1] PIN  
6. 093-0083 B [2] SHIM (1-MM THK)  
7. 093-0084 B [2] SHIM (1-MM THK)  
8. 093-0115 B [1] SHIM (2-MM THK)  
9. 093-0116 B [1] SHIM (2-MM THK)  
10. 093-0349 [1] WASHER (22X60X6-MM THK)  
11. 105-7822 [1] PIN (GRAPPLE)  
12. 105-7823 [1] PIN-CROSS  
13. 132-5390 [1] HEEL AS  
14. 113-2963 [1] PIN AS  
15. 4J-1888 [1] PIN-COTTER  
16. 7Y-3557 M [1] BOLT (M16X2X210-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4132 M [2] NUT (M16X2-THD)  
19. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24351328
 

135-4372: HEEL GP

135-4372 HEEL GP
S/N 2JR1-UP
PART OF 135-4368, 163-3164, 177-7552 LINKAGE AR
AN ATTACHMENT
i00496548 SEBP2435
1354372 HEEL GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-2841 [1] HEEL AS  
2. 105-7822 [1] PIN (GRAPPLE)  
3. 105-7823 [1] PIN-CROSS  
4. 5F-3715 [1] NUT-SLOTTED HEX (2-12-THD)  
5. 4J-1888 [1] PIN-COTTER  
6. 7Y-1094 M [8] WASHER (66X102X1-MM THK)  
7. 093-0083 B [2] SHIM (1-MM THK)  
  7Y-2498 B [1] SHIM (1.6-MM THK)  
  093-0115 B [1] SHIM (2-MM THK)  
8. 093-0090 B [2] SHIM (1-MM THK)  
  093-0122 B [1] SHIM (2-MM THK)  
  7Y-3355 B [1] SHIM (1.6-MM THK)  
9. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
10. 087-5805 [1] PIN  
11. 7X-2559 M [1] BOLT (M16X2X160-MM)  
12. 8T-4132 M [2] NUT (M16X2-THD)  
13. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
14. 093-0349 [1] WASHER (22X60X6-MM THK)  
15. 121-8702 [1] PIN AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24351329
 

109-9052: PROTECTOR GP-SIDE BAR

109-9052 PROTECTOR GP-SIDE BAR
S/N 2JR1-UP
PPROVIDES SIDEBAR PROTECTION FOR S,B,C,& D FAMILY BUCKETS
AN ATTACHMENT
i00493337 SEBP2435
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-4143 [2] PROTECTOR-SIDE BAR  
  9J-8441 [4] PIN  
  107-8559 [1] RETAINER AS  
  8E-5559 [1] RETAINER AS  
  8E-4743 [1] RETAINER  
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Linkage - Lubricate
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Implement Changing
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Bucket - Remove and Install
307B, 311–330 B-D Series, 345–5090 B and C Series and M312-M322 A-D Series Excavators
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Bucket Adjusters
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Bucket Linkage
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Quick Coupler<BR> 110-7272
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Bucket Cylinders
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Buckets
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Bucket Cylinder Lines
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove
325B Excavator Machine Systems
Bucket - Install
325B Excavator Machine Systems
Service Magazine
New Bolts In Bucket Linkage Groups Improves Reliability {6513}
1999/05/03
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}

Caterpillar Parts SIS Catalog 325B L :

BUCKET GP-HEAVY DUTY
346-0963 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
265-3003 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
265-3002 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
265-3001 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
208-3680 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
208-3679 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
208-3678 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY
208-3677 BUCKET GP-HEAVY DUTY
BUCKET GP-HEAVY DUTY ROCK
265-3035 BUCKET GP-HEAVY DUTY ROCK
318-8207 COUPLER AR-QUICK
COUPLER GP-QUICK
297-6983 COUPLER GP-QUICK
COUPLER GP-QUICK
397-8274 COUPLER GP-QUICK
GRAPPLE GP
150-4578 GRAPPLE GP
GRAPPLE GP
150-4579 GRAPPLE GP
HEEL GP
132-5389 HEEL GP
HEEL GP
135-4372 HEEL GP

Truck sale:

Caterpillar 325BL, Construction
29,000 
Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT
 
 
Caterpillar 325BL, Construction
- Crawler Excavators
avspare
Caterpillar 325BL, Construction
43,400 
Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 325BL, Construction
31,000 
Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
CATERPILLAR 325BL 1998
 
CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.