OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
HYDRAULIC GPCOOLER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP24390840
108-1011: CONTROL AR-HYDRAULIC
108-1011 CONTROL AR-HYDRAULIC
S/N 7XM1-UP
RIPPER
PART OF 325-4782 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N 7XM1-UP
RIPPER
PART OF 325-4782 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP24390841
109-7183: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 108-1009 Y | [1] | LINES GP-BULLDOZER MANIFOLD | ||
| 6Y-3591 Y | [1] | LINES GP-PUMP | ||
| 116-7810 Y | [1] | LINES GP-TILT CYLINDER | ||
| 6Y-3522 Y | [1] | LINKAGE GP-IMPLEMENT | ||
| 6Y-3525 Y | [1] | MOUNTING GP-VALVE | ||
| 9T-8346 Y | [1] | PUMP GP-PISTON | ||
| 9T-8344 Y | [1] | VALVE GP-BANK (BULLDOZER, RIPPER) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390842
158-7718: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | LINES GP-PILOT | ||
| Y | [1] | LINES GP-RIPPER | ||
| Y | [1] | VALVE GP-CONTROL | ||
| 158-8030 Y | [1] | VALVE GP-DIVERTER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390843
6Y-4857: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6Y-3526 Y | [1] | ADAPTER GP-MOTOR | ||
| 6Y-4743 Y | [1] | LINES GP-STEERING | ||
| 9T-8345 Y | [1] | MOTOR GP-PISTON | ||
| S/N 7XM1-3685 | ||||
| 159-7162 Y | [1] | MOTOR GP-PISTON | ||
| S/N 7XM3686-UP | ||||
| 6E-1661 Y | [1] | PUMP GP-PISTON | ||
| S/N 7XM1-4619 | ||||
| 139-4151 CY | [1] | PUMP GP-PISTON | ||
| S/N 7XM4620-UP | ||||
| 6E-1716 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| S/N 7XM1-3685 | ||||
| 164-3700 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| S/N 7XM3686-UP | ||||
| 9T-8704 Y | [1] | VALVE GP-PRESSURE CONTROL | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390844
8E-2797: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-6985 | [1] | PLATE AS | |
| 2. | 6T-4531 Y | [1] | VALVE & MTG GP-CONTROL | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7X-3325 | [2] | BOLT-LOCKING (1/2-13-THD) | ||
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 3T-3045 | [1] | CLIP AS | |
| 9. | 101-2915 | [1] | FILM-INSTRUCTION | |
| 10. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 11. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8T-9101 | [4] | BOLT (3/8-16X2.75-IN) | ||
| 12. | 8C-8988 | [2] | ELBOW | |
| 13. | 3J-1907 | [6] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390845
8E-2797: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | C | [1] | PLATE AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 188-6140 CY | [1] | VALVE & MTG GP-CONTROL | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 3T-3045 | [1] | CLIP AS | |
| 9. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 10. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 8T-8915 C | [4] | BOLT (3/8-16X3.25-IN) | |
| 12. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-8917 C | [2] | BOLT (1/2-13X1.25-IN) | |
| 14. | 137-3936 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 15. | 8C-8988 | [2] | ELBOW | |
| 16. | 200-8257 C | [1] | HARNESS AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390846
8E-2797: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | PLATE AS | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 188-6140 Y | [1] | VALVE & MTG GP-CONTROL | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 9. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 8T-8915 | [4] | BOLT (3/8-16X3.25-IN) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 13. | 137-3936 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 14. | 8C-8988 | [2] | ELBOW | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390847
350-6775: CONVERSION GP-HYDRAULIC SYSTEM
350-6775 CONVERSION GP-HYDRAULIC SYSTEM
S/N 7XM1-UP
PART OF 350-6769 CONVERSION AR-MACHINE
FOR USE WITH EMISSIONS RETROFIT REPOWER TIER III FOR D8R TRACTOR
S/N 7XM1-UP
PART OF 350-6769 CONVERSION AR-MACHINE
FOR USE WITH EMISSIONS RETROFIT REPOWER TIER III FOR D8R TRACTOR
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 208-9526 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 210-6607 Y | [1] | MOTOR & MTG GP-HYDRAULIC FAN | ||
| 253-7530 Y | [1] | PUMP GP-CHARGE | ||
| 204-2578 Y | [1] | PUMP GP-PISTON (REAR) | ||
| 237-3942 | [1] | ADAPTER | ||
| 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | ||
| 7X-0328 | [2] | BOLT (1/2-13X3.5-IN) | ||
| 7X-0333 | [2] | BOLT (1/2-13X4.75-IN) | ||
| 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | ||
| 8T-4182 M | [16] | BOLT (M10X1.5X45-MM) | ||
| 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | ||
| 8T-4195 M | [14] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [44] | BOLT (M10X1.5X35-MM) | ||
| 8T-8915 | [4] | BOLT (3/8-16X3.25-IN) | ||
| 8T-9393 | [4] | BOLT (5/8-11X1.5-IN) | ||
| 032-1853 | [2] | BOLT-12 POINT HEAD (3/4-10X2-IN) | ||
| 218-7227 | [1] | BRACKET AS | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 248-6991 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 6V-0852 | [1] | CAP-DUST | ||
| 7G-3833 | [1] | CLIP (TAB) | ||
| 7G-3834 | [1] | CLIP (SLOT) | ||
| 7G-5984 | [1] | CLIP (TAB) | ||
| 7G-5985 | [1] | CLIP (SLOT) | ||
| 6V-8640 | [1] | CONNECTOR | ||
| 6V-9874 | [2] | CONNECTOR (STRAIGHT) | ||
| 253-1354 | [1] | COUPLING AS-PERMANENT | ||
| 124-2138 | [2] | COUPLING-PERMANENT | ||
| 154-0115 | [1] | COUPLING-PERMANENT | ||
| 193-1551 | [1] | COUPLING-PERMANENT | ||
| 236-7638 | [1] | COUPLING-PERMANENT | ||
| 5H-4018 | [2] | COVER | ||
| 8C-3417 | [1] | ELBOW | ||
| 8T-1682 | [1] | ELBOW | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 1P-4584 | [2] | FLANGE-HALF | ||
| 8C-3205 | [8] | FLANGE-HALF | ||
| 8C-3206 | [14] | FLANGE-HALF | ||
| 7G-5986 | [1] | GROMMET | ||
| 8C-3174 | [1] | GROMMET | ||
| 122-6906 | [7] | HOSE-HYDRAULIC | ||
| 122-6908 | [7] | HOSE-HYDRAULIC | ||
| 122-6910 | [31] | HOSE-HYDRAULIC | ||
| 209-1392 | [1] | MANIFOLD | ||
| 217-6886 | [1] | MANIFOLD | ||
| 217-6887 | [1] | MANIFOLD | ||
| 226-7906 | [1] | MANIFOLD | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | ||
| 2K-8257 | [1] | SEAL-O-RING | ||
| 2M-9780 | [2] | SEAL-O-RING | ||
| 2S-4078 | [1] | SEAL-O-RING | ||
| 3J-1907 | [3] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 3K-0715 | [1] | SEAL-O-RING | ||
| 4J-0519 | [4] | SEAL-O-RING | ||
| 4J-0520 | [6] | SEAL-O-RING | ||
| 4J-0524 | [1] | SEAL-O-RING | ||
| 4J-5267 | [2] | SEAL-O-RING | ||
| 5F-3106 | [1] | SEAL-O-RING | ||
| 5K-9090 | [2] | SEAL-O-RING | ||
| 6J-2680 | [3] | SEAL-O-RING | ||
| 6K-6307 | [2] | SEAL-O-RING | ||
| 7M-8485 | [2] | SEAL-O-RING | ||
| 8T-0315 | [1] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 1P-3705 | [3] | SEAL-RECTANGULAR | ||
| 8C-8431 | [1] | TEE | ||
| 212-5804 | [1] | TUBE AS | ||
| 212-5805 | [1] | TUBE AS | ||
| 7X-7729 | [12] | WASHER (11X25X3-MM THK) | ||
| 2S-0115 | [2] | WASHER-HARD (20X36.5X5-MM THK) | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7X-0513 | [4] | WASHER-HARD (17X30X5-MM THK) | ||
| 7X-3392 | [4] | WASHER-HARD (13.5X22.5X3-MM THK) | ||
| 8T-4121 | [62] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24390848
109-9677: COOLER GP-HYDRAULIC OIL
109-9677 COOLER GP-HYDRAULIC OIL
S/N 7XM1-UP
PART OF 105-9698 INSTALLATION AR-ENGINE
S/N 7XM1-UP
PART OF 105-9698 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 217-2659 | [1] | BRACKET AS | |
| 2. | 110-6938 | [1] | BRACKET AS | |
| 7M-7794 | [2] | STUD-WELD (9.4X21.5X25.5-MM) | ||
| 3. | 118-0227 | [1] | BRACKET AS | |
| 7M-7794 | [2] | STUD-WELD (9.4X21.5X25.5-MM) | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 172-1672 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 5. | 234-8945 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 8T-6767 | [2] | PLUG-PIPE (3/8-18-THD) | ||
| 6. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 7. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 8. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 9. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 10. | 8T-4835 | [4] | BOLT (1/2-13X2-IN) | |
| 11. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP24390849
209-8378: COOLER GP-HYDRAULIC OIL
209-8378 COOLER GP-HYDRAULIC OIL
S/N 7XM1-UP
PART OF 350-6772 CONVERSION GP-COOLING SYSTEM
S/N 7XM1-UP
PART OF 350-6772 CONVERSION GP-COOLING SYSTEM
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 297-5587 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 303-8791 | [1] | CORE AS-OIL COOLER | |
| 124-8335 | [1] | VALVE AS-CONTROL | ||
| 4F-7391 | [1] | SEAL-O-RING | ||
| 3. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| 4. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 5. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
