AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

107-5935 HYDRAULIC AR-4 VALVE S/N 3WN1-UP; 4JN1-UP AN ATTACHMENT D6M TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
HYDRAULIC GP
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 3WN
 D6M TRACK-TYPE TRACTOR XL, LGP 3WN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2486 D6M 3WN   (1995)

HYDRAULIC SYSTEM

HYDRAULIC GP
107-5934 HYDRAULIC AR-2 VALVE
107-4473 HYDRAULIC AR-3 VALVE
107-4662 HYDRAULIC AR-4 VALVE
107-5935 HYDRAULIC AR-4 VALVE
 

#SEBP24860440
 

107-5935: HYDRAULIC AR-4 VALVE

107-5935 HYDRAULIC AR-4 VALVE
S/N 3WN1-UP; 4JN1-UP
AN ATTACHMENT
i01801869 SEBP2486
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  107-3909 Y [1] CONTROL GP-HYDRAULIC HAND (BULLDOZER)  
    S/N 3WN1530-UP; 4JN1335-UP
  107-3914 Y [1] CONTROL GP-HYDRAULIC HAND (RIPPER)  
  108-4350 Y [1] LINES GP-RIPPER  
  109-9928 Y [1] LINES GP-TILT CYLINDER  
  121-0934 Y [1] VALVE GP-BANK (BULLDOZER, RIPPER)  
    S/N 3WN1-3321; 4JN1-3137
  209-6764 Y [1] VALVE GP-BANK 4 (BULLDOZER, RIPPER)  
    S/N 3WN3322-UP; 4JN3138-UP
   
  9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
    (PLUGS & O-RING SEALS MUST BE INSTALLED IN THE ANGLE VALVE SECTION PORT)
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860441
 

107-4108: LINES GP-ANGLE & TILT

107-4108 LINES GP-ANGLE & TILT
S/N 3WN1-UP; 4JN1-UP
PART OF 107-4473 HYDRAULIC AR-3 VALVE
i00470791 SEBP2486
1074108 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-2697 [4] CLIP  
2. 8T-0248 [2] TEE  
3. 113-8241 [1] TUBE AS  
4. 113-8242 [1] TUBE AS  
5. 113-8243 [1] TUBE AS  
6. 113-8244 [1] TUBE AS  
7. 113-8245 [1] TUBE AS  
8. 113-8246 [1] TUBE AS  
9. 113-8247 [1] TUBE AS  
10. 113-8248 [1] TUBE AS  
11. 113-8249 [1] TUBE AS  
12. 113-8250 [1] TUBE AS  
13. 113-8251 [1] TUBE AS  
14. 113-8252 [1] TUBE AS  
15. 113-8253 [1] TUBE AS  
16. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
17. 148-8344 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-9162 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
18. 148-8370 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
19. 148-8375 [4] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-8981 [1] ELBOW  
20. 185-5769 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
  8C-3251 [1] ELBOW  
21. 6V-8398 [4] SEAL-O-RING  
22. 6V-9169 [6] NUT (13/16-16-THD)  
23. 6V-9746 [4] SEAL-O-RING  
24. 7J-9108 [5] SEAL-O-RING  
25. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP24860442
 

110-6113: LINES GP-ANGLE & TILT

110-6113 LINES GP-ANGLE & TILT
S/N 3WN1-UP; 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
i00471160 SEBP2486
1106113 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-7454 I [2] HOSE AS  
2. 112-7455 I [2] HOSE AS  
3. 112-7456 I [1] HOSE AS  
4. 112-7457 I [1] HOSE AS  
5. 6V-8398 [12] SEAL-O-RING  
6. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
7. 6V-8625 [2] ELBOW  
8. 3K-0360 [6] SEAL-O-RING  
9. 6V-8639 [4] CONNECTOR  
10. 112-7846 [2] GUARD  
11. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
12. 8T-4223 [21] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8C-7534 [3] CLIP  
14. 8T-4192 M [5] BOLT (M12X1.75X25-MM)  
15. 6V-7687 M [8] LOCKNUT (M12X1.75-THD)  
16. 4T-1847 [1] GUARD AS  
17. 2P-6471 [1] CLIP (TAB)  
18. 2P-6470 [1] CLIP (SLOT)  
19. 5P-7466 [8] CLIP (SLOT)  
20. 5P-8112 [8] GROMMET  
21. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
22. 5P-7467 [8] CLIP (TAB)  
23. 174-9109 I [2] HOSE AS  
24. 8L-6557 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860443
 

110-6113: LINES GP-ANGLE & TILT

110-6113 LINES GP-ANGLE & TILT
S/N 3WN1-UP; 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
i01621708 SEBP2486
1106113 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
2. 112-7454 I [2] HOSE AS  
3. 112-7455 I [2] HOSE AS  
4. 112-7456 I [1] HOSE AS  
5. 112-7457 I [1] HOSE AS  
6. 167-7270 [4] FILM-INSTRUCTION (NO STEP)  
7. 197-2477 [2] PIN  
8. 197-2479 I [2] HOSE AS-GREASE  
9. 198-6217 [2] GUARD  
10. 200-2645 [1] GUARD AS  
11. 204-5093 [2] PLATE  
12. 222-2773 [1] CHANNEL AS (RH)  
13. 222-2774 [1] CHANNEL AS (LH)  
14. 096-7033 [2] PIN-COTTER  
15. 148-8340 [4] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
16. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
17. 2P-6470 [1] CLIP (SLOT)  
18. 2P-6471 [1] CLIP (TAB)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3E-4319 M [1] STUD-TAPERLOCK (M12X1.75X55-MM)  
21. 5P-7466 [7] CLIP (SLOT)  
22. 5P-7467 [7] CLIP (TAB)  
23. 5P-8112 [7] GROMMET  
24. 6V-7687 M [6] LOCKNUT (M12X1.75-THD)  
25. 6V-8398 [6] SEAL-O-RING  
26. 7G-3832 [2] GROMMET  
27. 7G-3833 [2] CLIP (TAB)  
28. 7G-3834 [2] CLIP (SLOT)  
29. 7Y-1858 [2] WASHER (21X37X3-MM THK)  
30. 8T-4139 M [9] BOLT (M12X1.75X30-MM)  
31. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
32. 8T-4184 M [6] BOLT (M12X1.75X45-MM)  
33. 8T-4192 M [7] BOLT (M12X1.75X25-MM)  
34. 8T-4223 [27] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 8T-4244 M [3] NUT (M12X1.75-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860444
 

112-3447: LINES GP-ANGLE & TILT

112-3447 LINES GP-ANGLE & TILT
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
i00489422 SEBP2486
1123447 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-6435 I [2] HOSE AS  
2. 114-6436 I [2] HOSE AS  
3. 114-6438 I [1] HOSE AS  
4. 114-6440 I [1] HOSE AS  
5. 6V-8398 [12] SEAL-O-RING  
6. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
7. 6V-8625 [2] ELBOW  
8. 3K-0360 [6] SEAL-O-RING  
9. 6V-8639 [4] CONNECTOR  
10. 112-7846 [2] GUARD  
11. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
12. 8T-4223 [21] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 6V-7687 M [8] LOCKNUT (M12X1.75-THD)  
14. 4T-1847 [1] GUARD AS  
15. 8C-7534 [3] CLIP  
16. 2P-6471 [1] CLIP (TAB)  
17. 2P-6470 [1] CLIP (SLOT)  
18. 8T-4184 M [6] BOLT (M12X1.75X45-MM)  
19. 175-2504 I [2] HOSE AS  
20. 8T-4192 M [5] BOLT (M12X1.75X25-MM)  
21. 5P-7467 [8] CLIP (TAB)  
22. 5P-7466 [8] CLIP (SLOT)  
23. 5P-8112 [8] GROMMET  
24. 8L-6557 [2] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860445
 

112-3447: LINES GP-ANGLE & TILT

112-3447 LINES GP-ANGLE & TILT
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
i01621699 SEBP2486
1123447 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)(ANGLE, TILT CYLINDERS)  
2. 114-6435 I [2] HOSE AS  
3. 114-6436 I [2] HOSE AS  
4. 114-6438 I [1] HOSE AS  
5. 114-6440 I [1] HOSE AS  
6. 167-7270 [4] FILM-INSTRUCTION (NO STEP)  
7. 222-2773 [1] CHANNEL AS (RH)  
8. 222-2774 [1] CHANNEL AS (LH)  
9. 197-2477 [2] PIN  
10. 197-2479 I [2] HOSE AS-GREASE  
11. 198-6217 [2] GUARD  
12. 200-2645 [1] GUARD AS  
13. 204-5093 [2] PLATE  
14. 096-7033 [2] PIN-COTTER  
15. 148-8340 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
16. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
17. 2P-6470 [1] CLIP (SLOT)  
18. 2P-6471 [1] CLIP (TAB)  
19. 3B-6552 [2] ELBOW-PIPE  
20. 3E-4319 M [1] STUD-TAPERLOCK (M12X1.75X55-MM)  
21. 5P-7466 [7] CLIP (SLOT)  
22. 5P-7467 [7] CLIP (TAB)  
23. 5P-8112 [7] GROMMET  
24. 6V-7687 M [6] LOCKNUT (M12X1.75-THD)  
25. 6V-8398 [6] SEAL-O-RING  
26. 7G-3832 [2] GROMMET  
27. 7G-3833 [2] CLIP (TAB)  
28. 7G-3834 [2] CLIP (SLOT)  
29. 7Y-1858 [2] WASHER (21X37X3-MM THK)  
30. 8T-4139 M [9] BOLT (M12X1.75X30-MM)  
31. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
32. 8T-4192 M [7] BOLT (M12X1.75X25-MM)  
33. 8T-4223 [27] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-4244 M [3] NUT (M12X1.75-THD)  
35. 8T-4184 M [6] BOLT (M12X1.75X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860446
 

111-4620: LINES GP-LIFT CYLINDER

111-4620 LINES GP-LIFT CYLINDER
S/N 3WN1-UP; 4JN1-UP
PART OF 107-4473 HYDRAULIC AR-3 VALVE
i00480016 SEBP2486
1114620 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
2. 3H-8683 [2] CLIP  
3. 5K-2697 [2] CLIP  
4. 113-5321 [1] TUBE AS  
5. 113-5322 [1] TUBE AS  
6. 113-5324 [1] TUBE AS  
7. 113-5325 [1] TUBE AS  
8. 9X-6590 [4] WASHER (30.5X46X3.5-MM THK)  
9. 148-8327 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [8] SEAL-O-RING  
10. 148-8344 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9162 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
11. 148-8414 [2] REDUCER AS  
    (EACH INCLUDES)
  6V-8943 [1] REDUCER  
  7J-9108 [1] SEAL-O-RING  
12. 164-6862 [2] TEE AS  
    (EACH INCLUDES)
  6V-9160 [1] TEE-FACE SEAL  
  6V-9746 [3] SEAL-O-RING  
13. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [1] NUT (M10X1.5-THD)  
15. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
16. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP24860447
 

111-4626: LINES GP-LIFT CYLINDER

111-4626 LINES GP-LIFT CYLINDER -BULLDOZER
S/N BHB1-UP; BHK1-UP; 3WN1-UP; 4JN1-UP; 3XP1-UP; 4MP1-UP
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00480027 SEBP2486
1114626 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9309 [2] TUBE AS  
2. 113-9311 I [2] HOSE AS  
3. 113-9312 I [2] HOSE AS  
4. 3D-2824 [4] SEAL-O-RING  
5. 6V-8713 [2] CONNECTOR  
6. 6V-9007 [2] ELBOW  
7. 6V-9746 [2] SEAL-O-RING  
8. 7J-9108 [8] SEAL-O-RING  
9. 8T-1887 [2] CLIP (SLOT)  
10. 8T-1888 [2] CLIP (TAB)  
11. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860448
 

115-4569: LINES GP-LIFT CYLINDER

115-4569 LINES GP-LIFT CYLINDER -SEMI-UNIVERSAL BULLDOZER
S/N 3WN1-UP; 2SP1-UP
PART OF 138-7032 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00493003 SEBP2486
1154569 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-5282 I [2] HOSE AS  
2. 7J-9108 [8] SEAL-O-RING  
3. 8E-5283 I [2] HOSE AS  
4. 6V-8713 [4] CONNECTOR  
5. 3D-2824 [4] SEAL-O-RING  
6. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
7. 8T-4244 M [8] NUT (M12X1.75-THD)  
8. 5P-7468 [2] CLIP (SLOT)  
9. 5P-7469 [2] CLIP (TAB)  
10. 7G-3833 [4] CLIP (TAB)  
11. 7G-3834 [4] CLIP (SLOT)  
12. 8C-3174 [4] GROMMET  
13. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
14. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
15. 6V-7359 [2] GROMMET (25-MM ID, 37-MM OD)  
16. 5P-7464 [2] CLIP (SLOT)  
17. 5P-7465 [2] CLIP (TAB)  
18. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860449
 

5Q-8084: LINES GP-LIFT CYLINDER

5Q-8084 LINES GP-LIFT CYLINDER
S/N 8FP1-UP
PART OF 5Q-7870 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i01784333 SEBP2486
5Q8084 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Q-8085 I [2] HOSE AS  
2. 7J-9108 [4] SEAL-O-RING  
3. 5Q-8086 I [2] HOSE AS  
4. 148-8341 [4] CONNECTOR AS  
    (EACH INCLUDES)
  7J-9108 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
6. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
7. 8T-4244 M [8] NUT (M12X1.75-THD)  
8. 5P-7468 [2] CLIP (SLOT)  
9. 5P-7469 [2] CLIP (TAB)  
10. 7G-3833 [4] CLIP (TAB)  
11. 7G-3834 [4] CLIP (SLOT)  
12. 8C-3174 [4] GROMMET  
13. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
14. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
15. 6V-7359 [2] GROMMET (25-MM ID, 37-MM OD)  
16. 5P-7464 [2] CLIP (SLOT)  
17. 5P-7465 [2] CLIP (TAB)  
18. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6M :

107-4662 HYDRAULIC AR-4 VALVE
107-4473 HYDRAULIC AR-3 VALVE
107-5934 HYDRAULIC AR-2 VALVE
FILTER & MTG GP-HYDRAULIC
9T-3926 FILTER & MTG GP-HYDRAULIC
CYLINDER GP-TILT
160-0054 CYLINDER GP-TILT
CYLINDER GP-TILT
151-4518 CYLINDER GP-TILT
CYLINDER GP-TILT
115-3523 CYLINDER GP-TILT
CYLINDER GP-TILT
110-4761 CYLINDER GP-TILT
LINES GP-ANGLE & TILT
107-4108 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
110-6113 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
110-6113 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
112-3447 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
112-3447 LINES GP-ANGLE & TILT
LINES GP-LIFT CYLINDER
111-4620 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
111-4626 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
115-4569 LINES GP-LIFT CYLINDER

Truck sale:

Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
 
56,500 
Caterpillar D6M, Crawler dozers, Construction


 
 
Caterpillar D6M, Construction
- Crawler dozers
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.