IMPLEMENTS
BULLDOZER GPC-FRAME GP
IMPLEMENTS
BULLDOZER GP#SEBP24860490
133-9154: BULLDOZER AR-PWR ANGLE & TILT
133-9154 BULLDOZER AR-PWR ANGLE & TILT
S/N 3XP1-UP
ADJUSTABLE PITCH
FOR USE WITH @@@@@134-6775@@@@@, @@@@@111-4626@@@@@, @@@@@110-3269@@@@@
AN ATTACHMENT
S/N 3XP1-UP
ADJUSTABLE PITCH
FOR USE WITH @@@@@134-6775@@@@@, @@@@@111-4626@@@@@, @@@@@110-3269@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 110-5230 Y | [1] | BLADE GP-ANGLING | ||
| 110-5226 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 137-5107 Y | [2] | CYLINDER GP-HYDRAULIC (ANGLE) | ||
| -OR- | ||||
| 152-6485 Y | [2] | CYLINDER GP-HYDRAULIC | ||
| -OR- | ||||
| 228-0320 Y | [2] | CYLINDER GP-ANGLING | ||
| 110-4761 Y | [1] | CYLINDER GP-TILT | ||
| -OR- | ||||
| 151-4518 Y | [1] | CYLINDER GP-TILT | ||
| -OR- | ||||
| 160-0054 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | ||
| 110-6113 Y | [1] | LINES GP-ANGLE & TILT | ||
| 110-5232 Y | [1] | LINK GP-PITCH | ||
| -OR- | ||||
| 190-5328 Y | [1] | LINK GP-PITCH | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 107-8126 | [2] | BEARING (FRAME) | ||
| (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME) | ||||
| 109-0959 | [4] | RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860491
133-9155: BULLDOZER AR-PWR ANGLE & TILT
133-9155 BULLDOZER AR-PWR ANGLE & TILT
S/N 4MP1-UP
FOR USE WITH @@@@@111-4626@@@@@, @@@@@110-3269@@@@@, @@@@@134-6775@@@@@
AN ATTACHMENT
S/N 4MP1-UP
FOR USE WITH @@@@@111-4626@@@@@, @@@@@110-3269@@@@@, @@@@@134-6775@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 112-7446 Y | [1] | BLADE GP-ANGLING | ||
| 112-7443 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 137-5107 Y | [2] | CYLINDER GP-HYDRAULIC (ANGLE) | ||
| -OR- | ||||
| 152-6485 Y | [2] | CYLINDER GP-HYDRAULIC | ||
| -OR- | ||||
| 228-0320 Y | [2] | CYLINDER GP-ANGLING | ||
| 110-4761 Y | [1] | CYLINDER GP-TILT | ||
| -OR- | ||||
| 151-4518 Y | [1] | CYLINDER GP-TILT | ||
| -OR- | ||||
| 160-0054 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | ||
| 112-3447 Y | [1] | LINES GP-ANGLE & TILT | ||
| 110-5232 Y | [1] | LINK GP-PITCH | ||
| -OR- | ||||
| 190-5328 Y | [1] | LINK GP-PITCH | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 107-8126 | [2] | BEARING (FRAME) | ||
| (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME) | ||||
| 109-0959 | [4] | RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860492
177-1998: BULLDOZER AR-PWR ANGLE & TILT
177-1998 BULLDOZER AR-PWR ANGLE & TILT -FINE GRADING
S/N BHB1-UP
3-M FOLDABLE BLADE. WITH ADJUSTABLE PITCH
AN ATTACHMENT
S/N BHB1-UP
3-M FOLDABLE BLADE. WITH ADJUSTABLE PITCH
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 177-2001 Y | [1] | BLADE GP-ANGLING | ||
| -OR- | ||||
| 226-5426 Y | [1] | BLADE GP | ||
| 112-7443 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 152-6485 Y | [2] | CYLINDER GP-HYDRAULIC | ||
| -OR- | ||||
| 228-0320 Y | [2] | CYLINDER GP-ANGLING | ||
| 110-3269 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 160-0054 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | ||
| 112-3447 Y | [1] | LINES GP-ANGLE & TILT | ||
| 111-4626 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 190-5328 Y | [1] | LINK GP-PITCH | ||
| 134-6775 Y | [1] | PIN GP-CYLINDER | ||
| 107-8126 J | [2] | BEARING | ||
| 109-0959 J | [4] | RING | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD AT RH END NEAR TOP) | ||||
| J | PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860493
177-1999: BULLDOZER AR-PWR ANGLE & TILT
177-1999 BULLDOZER AR-PWR ANGLE & TILT
S/N BHK1-UP
WITH ADJUSTABLE PITCH
AN ATTACHMENT
S/N BHK1-UP
WITH ADJUSTABLE PITCH
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 177-2002 Y | [1] | BLADE GP-ANGLING | ||
| -OR- | ||||
| 223-2260 Y | [1] | BLADE GP | ||
| 112-7443 Y | [1] | C-FRAME GP-POWER ANGLING | ||
| 152-6485 Y | [2] | CYLINDER GP-HYDRAULIC | ||
| -OR- | ||||
| 228-0320 Y | [2] | CYLINDER GP-ANGLING | ||
| 110-3269 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 160-0054 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | ||
| 112-3447 Y | [1] | LINES GP-ANGLE & TILT | ||
| 111-4626 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 190-5328 Y | [1] | LINK GP-PITCH | ||
| 134-6775 Y | [1] | PIN GP-CYLINDER | ||
| 107-8126 J | [2] | BEARING | ||
| 109-0959 J | [4] | RING | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP AT RH END) | ||||
| J | PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860494
122-6593: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP24860495
138-7032: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 115-4594 Y | [1] | BLADE & EDGE GP-SEMI-UNIVERSAL | ||
| 115-3524 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 115-4569 Y | [1] | LINES GP-LIFT CYLINDER (SEMI-UNIVERSAL BULLDOZER) | ||
| 115-4564 Y | [1] | LINES GP-TILT CYLINDER | ||
| 138-7033 Y | [1] | MOUNTING GP-CYLINDER | ||
| 115-4472 Y | [1] | PUSH ARM GP | ||
| 142-1229 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 6V-4249 M | [8] | BOLT (M10X1.5X50-MM) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 211-8511 | [1] | BRACKET | ||
| 149-6292 | [4] | PAWL | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP AT RH END) | ||||
| 149-6290 | [4] | SPACER | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860496
5Q-7870: BULLDOZER AR-STRAIGHT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5Q-8052 Y | [1] | BLADE GP-STRAIGHT | ||
| 1U-1839 Y | [2] | CYLINDER GP-BULLDOZER LIFT | ||
| 5Q-8084 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 5Q-8082 Y | [1] | LINES GP-TILT | ||
| 5Q-8040 Y | [1] | MOUNTING GP-CYLINDER (BULLDOZER) | ||
| 5Q-8010 Y | [1] | PUSH ARM & BRACE GP | ||
| 5Q-7867 Y | [1] | TRUNNION GP-BULLDOZER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24860497
110-5226: C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 145-0799 | [1] | FRAME AS | |
| 8P-9770 | [1] | PLATE | ||
| 9R-2640 M | [2] | BOSS (M12X1.75X25-MM) | ||
| 2. | 104-7423 | [1] | TOWER AS | |
| 3. | 139-1143 | [1] | TOWER AS (LIFT RH) | |
| 139-1141 | [1] | TOWER AS (LIFT LH) | ||
| 4. | 124-5240 | [2] | PLATE | |
| 5. | 145-0804 | [1] | SLEEVE | |
| 6. | 108-8268 | [2] | BRACKET | |
| 7. | 4Y-4905 B | [8] | WASHER (79X175X2-MM THK) | |
| 8. | 104-4746 | [2] | DOWEL | |
| 9. | 110-5218 | [2] | PLATE | |
| 10. | 124-5741 | [2] | PIN | |
| 11. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 12. | 108-5794 | [4] | PLUG-PIPE | |
| 13. | 109-0958 | [2] | PIN | |
| 14. | 124-5233 | [2] | PIN | |
| 15. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | ||
| 16. | 124-5234 | [2] | RETAINER | |
| 17. | 8T-4139 M | [6] | BOLT (M12X1.75X30-MM) | |
| 18. | 104-7434 | [1] | RETAINER | |
| 19. | 104-4817 | [1] | PIN | |
| 20. | 7X-2562 M | [5] | BOLT (M20X2.5X45-MM) | |
| 21. | 124-5235 B | [6] | SHIM (0.8-MM THK) | |
| 22. | 8T-4123 | [3] | WASHER (22X35X3.5-MM THK) | |
| 23. | 104-7391 | [1] | CAP | |
| 24. | 145-0801 | [1] | PIN | |
| 25. | 108-9604 | [1] | SPACER | |
| 26. | 145-0803 | [1] | PIN | |
| 27. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 28. | 110-5217 | [2] | PLATE | |
| 29. | 105-2058 | [1] | BRACKET AS | |
| 30. | 7X-2465 M | [4] | BOLT (M24X3X180-MM) | |
| 8T-1482 | [4] | WASHER-HARD (26X50X8-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP24860498
110-5226: C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 145-0799 | [1] | FRAME AS | |
| 8P-9770 | [1] | PLATE | ||
| 9R-2640 M | [2] | BOSS (M12X1.75X25-MM) | ||
| 2. | 104-7423 | [1] | TOWER AS | |
| 3. | 139-1143 | [1] | TOWER AS (LIFT RH) | |
| 139-1141 | [1] | TOWER AS (LIFT LH) | ||
| 4. | 124-5240 | [2] | PLATE | |
| 5. | 145-0804 | [1] | SLEEVE | |
| 6. | 108-8268 | [2] | BRACKET | |
| 7. | 4Y-4905 B | [8] | WASHER (79X175X2-MM THK) | |
| 8. | 104-4746 | [2] | DOWEL | |
| 9. | 110-5218 | [2] | PLATE | |
| 10. | 124-5741 | [2] | PIN | |
| 11. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 12. | 108-5794 | [4] | PLUG-PIPE | |
| 13. | 109-0958 | [2] | PIN | |
| 14. | 124-5233 | [2] | PIN | |
| 15. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | ||
| 16. | 124-5234 | [2] | RETAINER | |
| 17. | 8T-4139 M | [6] | BOLT (M12X1.75X30-MM) | |
| 18. | 104-7434 | [1] | RETAINER | |
| 19. | 104-4817 | [1] | PIN | |
| 20. | 7X-2562 M | [5] | BOLT (M20X2.5X45-MM) | |
| 21. | 124-5235 B | [6] | SHIM (0.8-MM THK) | |
| 22. | 8T-4123 | [3] | WASHER (22X35X3.5-MM THK) | |
| 23. | 104-7391 | [1] | CAP | |
| 24. | 160-5691 C | [1] | PIN | |
| 25. | 161-2113 C | [1] | SPACER (60X89.8X231-MM THK) | |
| 26. | 145-0803 | [1] | PIN | |
| 27. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 28. | 110-5217 | [2] | PLATE | |
| 29. | 105-2058 | [1] | BRACKET AS | |
| 30. | 7X-2465 M | [4] | BOLT (M24X3X180-MM) | |
| 8T-1482 | [4] | WASHER-HARD (26X50X8-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP24860499
110-5226: C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 3
AN ATTACHMENT
S/N 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your D6M TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 200-2649 | [1] | FRAME AS | |
| 1A. | 145-0804 | [1] | SLEEVE | |
| 2. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 3. | 109-0958 | [2] | PIN | |
| 4. | 4Y-4905 B | [6] | WASHER (79X175X2-MM THK) | |
| 5. | 104-4746 | [2] | DOWEL | |
| 6. | 108-5794 | [4] | PLUG-PIPE | |
| 7. | 104-7391 | [1] | CAP | |
| 8. | 124-5741 | [2] | PIN | |
| 9. | 8T-4123 | [3] | WASHER (22X35X3.5-MM THK) | |
| 10. | 161-2113 | [1] | SPACER (60X89.8X231-MM THK) | |
| 11. | 160-5691 | [1] | PIN | |
| 12. | 145-0803 | [1] | PIN | |
| 13. | 124-5235 B | [6] | SHIM (0.8-MM THK) | |
| 14. | 124-5234 | [2] | RETAINER | |
| 15. | 105-2058 | [1] | BRACKET AS | |
| 16. | 298-2764 M | [4] | BOLT (M24X3X190-MM) | |
| 17. | 8T-1482 | [4] | WASHER-HARD (26X50X8-MM THK) | |
| 18. | 110-5217 | [2] | PLATE | |
| 19. | 110-5218 | [2] | PLATE | |
| 20. | 104-7434 | [1] | RETAINER | |
| 21. | 7X-2562 M | [5] | BOLT (M20X2.5X45-MM) | |
| 22. | 104-4817 | [1] | PIN | |
| 23. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 24. | 8T-4139 M | [6] | BOLT (M12X1.75X30-MM) | |
| 25. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| 26. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 124-5233 | [2] | PIN | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
