AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-7443 C-FRAME GP-POWER ANGLING S/N 3XP1-UP; 4MP1-UP PART OF 107-5600, 121-0406, 126-5209, 133-9155 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D6M


IMPLEMENTS
C-FRAME GP
LINES GP-GREASE
BULLDOZER GP
PUSH ARM GP
BULLDOZER GP

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 3WN
 D6M TRACK-TYPE TRACTOR XL, LGP 3WN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2486 D6M 3WN   (1995)

IMPLEMENTS

C-FRAME GP
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
 

#SEBP24860500
 

112-7443: C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00493157 SEBP2486
1127443 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5235 B [6] SHIM (0.8-MM THK)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 108-9603 [1] PIN  
9. 108-9604 [1] SPACER  
10. 108-9602 [1] PIN  
11. 105-2058 [1] BRACKET AS  
12. 7X-2465 M [4] BOLT (M24X3X180-MM)  
13. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
14. 110-5217 [2] PLATE  
15. 110-5218 [2] PLATE  
16. 104-7434 [1] RETAINER  
17. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
18. 104-4817 [1] PIN  
19. 124-5234 [2] RETAINER  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 124-5233 [2] PIN  
24. 8T-4123 [3] WASHER (22X35X3.5-MM THK)  
25. 112-7444 [1] FRAME AS  
26. 8P-9770 [1] PLATE  
27. 108-9606 [1] SLEEVE  
28. 108-8268 [2] BRACKET  
29. 9R-2640 M [2] BOSS (M12X1.75X25-MM)  
30. 104-7423 [1] TOWER AS  
31. 139-1145 [1] TOWER AS (LH)  
32. 139-1144 [1] TOWER AS (RH)  
33. 124-5240 [2] PLATE  
34. 124-5741 [2] PIN  
35. 4Y-4905 B [12] WASHER (79X175X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24860501
 

112-7443: C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
i00902684 SEBP2486
1127443 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5235 B [6] SHIM (0.8-MM THK)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 145-0801 C [1] PIN  
9. 108-9604 [1] SPACER  
10. 145-0803 C [1] PIN  
11. 105-2058 [1] BRACKET AS  
12. 7X-2465 M [4] BOLT (M24X3X180-MM)  
13. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
14. 110-5217 [2] PLATE  
15. 110-5218 [2] PLATE  
16. 104-7434 [1] RETAINER  
17. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
18. 104-4817 [1] PIN  
19. 124-5234 [2] RETAINER  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 124-5233 [2] PIN  
24. 8T-4123 [3] WASHER (22X35X3.5-MM THK)  
25. 145-0800 C [1] FRAME AS  
26. 8P-9770 [1] PLATE  
27. 145-0804 [1] SLEEVE  
28. 108-8268 [2] BRACKET  
29. 9R-2640 M [2] BOSS (M12X1.75X25-MM)  
30. 104-7423 [1] TOWER AS  
31. 139-1145 [1] TOWER AS (LIFT LH)  
32. 139-1144 [1] TOWER AS (LIFT RH)  
    (EACH LIFT TOWER AS INCLUDES)
33. 8G-2019 [1] HANDLE  
34. 124-5240 [2] PLATE  
35. 4Y-4905 B [8] WASHER (79X175X2-MM THK)  
36. 124-5741 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24860502
 

112-7443: C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
i01036795 SEBP2486
1127443 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5235 B [6] SHIM (0.8-MM THK)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 160-5691 C [1] PIN  
9. 161-2113 C [1] SPACER (60X89.8X231-MM THK)  
10. 145-0803 [1] PIN  
11. 105-2058 [1] BRACKET AS  
12. 7X-2465 M [4] BOLT (M24X3X180-MM)  
13. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
14. 110-5217 [2] PLATE  
15. 110-5218 [2] PLATE  
16. 104-7434 [1] RETAINER  
17. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
18. 104-4817 [1] PIN  
19. 124-5234 [2] RETAINER  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 124-5233 [2] PIN  
24. 8T-4123 [3] WASHER (22X35X3.5-MM THK)  
25. 145-0800 [1] FRAME AS  
26. 8P-9770 [1] PLATE  
27. 145-0804 [1] SLEEVE  
28. 108-8268 [2] BRACKET  
29. 9R-2640 M [2] BOSS (M12X1.75X25-MM)  
30. 104-7423 [1] TOWER AS  
31. 139-1145 [1] TOWER AS (LIFT LH)  
32. 139-1144 [1] TOWER AS (LIFT RH)  
    (EACH LIFT TOWER AS INCLUDES)
33. 8G-2019 [1] HANDLE  
34. 124-5240 [2] PLATE  
35. 4Y-4905 B [8] WASHER (79X175X2-MM THK)  
36. 124-5741 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24860503
 

112-7443: C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
PART OF 107-5600, 121-0406, 126-5209, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01782011 SEBP2486
1127443 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5235 B [6] SHIM (0.8-MM THK)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 160-5691 [1] PIN  
9. 161-2113 [1] SPACER (60X89.8X231-MM THK)  
10. 145-0803 [1] PIN  
11. 105-2058 [1] BRACKET AS  
12. 298-2764 M [4] BOLT (M24X3X190-MM)  
13. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
14. 110-5217 [2] PLATE  
15. 110-5218 [2] PLATE  
16. 104-7434 [1] RETAINER  
17. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
18. 104-4817 [1] PIN  
19. 124-5234 [2] RETAINER  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 124-5233 [2] PIN  
24. 8T-4123 [3] WASHER (22X35X3.5-MM THK)  
25. 200-2636 C [1] FRAME AS  
25A. 8P-9770 [1] PLATE  
25B. 9R-2640 M [1] BOSS (M12X1.75X25-MM)  
25C. 9R-3572 M [2] BOSS (M12X1.75X20-MM)  
25D. 104-7423 [1] TOWER AS  
25E. 108-8268 [2] BRACKET  
25F. 124-5240 [2] PLATE  
25G. 145-0804 [1] SLEEVE  
25H. 200-2632 [1] TOWER AS  
25J. 200-2633 [1] TOWER AS  
25K. 224-0683 [2] STEP AS  
26. 4Y-4905 B [6] WASHER (79X175X2-MM THK)  
27. 124-5741 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24860504
 

349-2450: LINES GP-GREASE

349-2450 LINES GP-GREASE
S/N 4JN1-UP
PART OF 230-6109 BAR GP-EQUALIZER
AN ATTACHMENT
i03728301 SEBP2486
3492450 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 173-3660 I [1] HOSE AS  
3. 169-7393 [1] CONNECTOR AS  
  3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
4. 5P-4479 [1] ELBOW (FLARED-LONG)  
5. 6D-3479 [1] CLIP (LOOP)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP24860505
 

110-5232: LINK GP-PITCH

110-5232 LINK GP-PITCH
S/N 3XP1-UP; 4MP1-UP
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 133-9154, 133-9155 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00470854 SEBP2486
1105232 LINK GP-PITCH Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-3896 [1] LINK  
2. 7J-1309 [2] BEARING  
3. 1S-3311 [2] RING-RETAINING  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
 

#SEBP24860506
 

190-5328: LINK GP-PITCH

190-5328 LINK GP-PITCH
S/N BHB1-UP; BHK1-UP; 3XP1-UP; 4MP1-UP
PART OF 107-5599, 107-5600, 121-0406, 126-5209, 133-9154, 133-9155, 177-1998, 177-1999 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01581543 SEBP2486
1905328 LINK GP-PITCH Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(PITCH LINK)  
2. 7J-1309 [2] BEARING  
3. 188-3757 [1] LINK  
4. 1S-3311 [2] RING-RETAINING  
 

#SEBP24860507
 

5Q-8010: PUSH ARM & BRACE GP

5Q-8010 PUSH ARM & BRACE GP
S/N 8FP1-UP
PART OF 5Q-7870 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i01784298 SEBP2486
5Q8010 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Q-8006 [1] ARM AS (LH)  
1A. 3G-6313 [1] BEARING  
1B. 1U-2533 [1] BAR  
1C. 115-4522 [1] BRACKET  
1D. 4T-0780 [1] TRUNNION  
1E. 179-6153 [1] BEARING  
  8E-5701 [14] SHIM (0.8-MM THK)  
  8E-5703 [14] SHIM (0.8-MM THK)  
1F. 8P-9770 [1] PLATE  
2. 5Q-8009 [1] ARM AS (RH)  
2A. 3G-6313 [1] BEARING  
2B. 1U-2533 [1] BAR  
2C. 4T-0732 [1] BRACKET  
2D. 179-6153 [1] BEARING  
  8E-5701 [14] SHIM (0.8-MM THK)  
  8E-5703 [14] SHIM (0.8-MM THK)  
2E. 8P-9770 [1] PLATE  
3. 160-6306 [1] CAP-BEARING  
4. 8E-5701 [52] SHIM (0.8-MM THK)  
5. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
6. 8E-5703 [78] SHIM (0.8-MM THK)  
7. 8J-2880 [3] CAP AS-BEARING  
8. 8T-4131 M [22] NUT (M20X2.5-THD)  
9. 115-3523 Y [1] CYLINDER GP-TILT  
10. 3F-6185 [2] PIN  
11. 4F-0255 [2] PIN  
12. 3B-4627 [2] PIN-COTTER  
13. 124-9672 [1] BRACE AS-TILT  
  8E-2887 [1] YOKE  
16. 4T-1520 [1] CAGE AS  
  6J-5383 [1] BEARING  
17. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
18. 7X-2566 M [6] BOLT (M20X2.5X110-MM)  
19. 8T-4123 [6] WASHER (22X35X3.5-MM THK)  
20. 8T-5439 [6] WASHER-HARD (21.5X45X6-MM THK)  
22. 7X-2532 M [8] BOLT (M20X2.5X130-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860508
 

115-4472: PUSH ARM GP

115-4472 PUSH ARM GP
S/N 3WN1-UP; 2SP1-UP
PART OF 122-6593, 138-7032 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00492897 SEBP2486
1154472 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-0255 [2] PIN  
2. 4T-1520 [1] CAGE AS  
2A. 6J-5383 [1] BEARING  
3. 8E-5701 B [52] SHIM (0.8-MM THK)  
4. 8E-5703 B [78] SHIM (0.8-MM THK)  
5. 8J-2880 [3] CAP AS-BEARING  
6. 115-3523 Y [1] CYLINDER GP-TILT  
7. 115-4473 [1] ARM AS (RH)  
7A. 3G-6313 [1] BEARING  
7B. 1U-2533 [1] BAR  
7C. 4T-0732 [1] BRACKET  
7D. 179-6153 [1] BEARING  
7E. 8P-9770 [1] PLATE  
8. 115-4474 [1] ARM AS (LH)  
8A. 3G-6313 [1] BEARING  
8B. 1U-2533 [1] BAR  
8C. 4T-0780 [1] TRUNNION  
8D. 179-6153 [1] BEARING  
8E. 8P-9770 [1] PLATE  
8F. 115-4522 [1] BRACKET  
9. 124-9672 [1] BRACE AS-TILT  
9A. 8E-2887 [1] YOKE  
10. 160-6306 [2] CAP-BEARING  
11. 3B-4626 [2] PIN-COTTER  
12. 3F-6185 [2] PIN  
13. 6V-9167 M [8] BOLT (M20X2.5X140-MM)  
14. 7X-2566 M [6] BOLT (M20X2.5X110-MM)  
15. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
16. 8T-4123 [6] WASHER (22X35X3.5-MM THK)  
17. 8T-4131 M [22] NUT (M20X2.5-THD)  
18. 8T-5439 [6] WASHER-HARD (21.5X45X6-MM THK)  
19. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24860509
 

142-1229: TRUNNION GP-BULLDOZER

142-1229 TRUNNION GP-BULLDOZER
S/N 3WN1-UP; 4JN1-UP; 2SP1-UP
PART OF 122-6593, 138-7032 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00650777 SEBP2486
1421229 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1979 [2] SEAL-O-RING  
2. 9U-8909 [2] TRUNNION AS  
    (EACH INCLUDES)
  9J-2759 [1] TRUNNION  
3. 7X-2475 M [20] BOLT (M16X2X130-MM)  
4. 8T-4122 [20] WASHER-HARD (17X32X3.5-MM THK)  
5. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 143-3148 [2] COVER  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6M :

C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
5Q-7870 BULLDOZER AR-STRAIGHT
138-7032 BULLDOZER AR-SEMI-UNIVERSAL
122-6593 BULLDOZER AR-SEMI-UNIVERSAL
177-1999 BULLDOZER AR-PWR ANGLE & TILT
177-1998 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
LINES GP-GREASE
349-2450 LINES GP-GREASE
LINK GP-PITCH
110-5232 LINK GP-PITCH
LINK GP-PITCH
190-5328 LINK GP-PITCH
PUSH ARM & BRACE GP
5Q-8010 PUSH ARM & BRACE GP
PUSH ARM GP
115-4472 PUSH ARM GP

Truck sale:

Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
 
56,500 
Caterpillar D6M, Crawler dozers, Construction


 
 
Caterpillar D6M, Construction
- Crawler dozers
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.