9T-9182 VALVE GP-CONTROL S/N 3DR1-UP; 4BR1-UP ANGLE PART OF 9T-9183 VALVE GP-BANK, 9T-9184 VALVE GP-BANK 4 ALSO AN ATTACHMENT D5M

HYDRAULIC SYSTEM

VALVE GP-CONTROL

0. 9T-9182 VALVE GP-C

VALVE GP-MAKEUP

1. 6E-5653 VALVE GP-M
2. 9T-6695 VALVE GP-M

PUMP GP

3. 101-0960 VALVE GP-P

VALVE GP-RELIEF

4. 6E-0772 VALVE GP-R

IMPLEMENTS

BULLDOZER GP

5. 104-7430 BULLDOZER
6. 107-6810 BULLDOZER
7. 133-9149 BULLDOZER
8. 133-9151 BULLDOZER

C-FRAME GP

9. 108-3925 C-FRAME GP
0. INFORMATION

TRACK-TYPE TRACTOR D5M TRACK-TYPE TRACTOR 3DR
D5M & D5M LGP Track-Type Tractor 3DR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2497 D5M 3DR (1996)

HYDRAULIC SYSTEM

VALVE GP-CONTROL

6E-5953 VALVE GP-CONTROL

9T-6697 VALVE GP-CONTROL

9T-9182 VALVE GP-CONTROL

#SEBP24970380

9T-9182: VALVE GP-CONTROL

VALVE GP-CONTROL

9T-9182 VALVE GP-CONTROL
S/N 3DR1-UP; 4BR1-UP
ANGLE
PART OF 9T-9183 VALVE GP-BANK, 9T-9184 VALVE GP-BANK 4
ALSO AN ATTACHMENT

i00437317 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	8B-2377	[2]	BOLT (1/4-20X2-IN)
2.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	6E-5564	[1]	HOUSING
4.	031-5085	[1]	BOLT-LOCKING (1/4-20X1-IN)
5.	9T-0874	[1]	SPRING-SPOOL
6.	4T-4533	[1]	SPACER (7.1X17.3X1.5-MM THK)
7.	4T-4534	[1]	SPRING (OUTER)
8.	4T-4528	[1]	RETAINER
9.	4T-4520	[1]	WASHER-SPECIAL
10.	7J-0204	[1]	SEAL-O-RING
11.	031-0214	[2]	BOLT-LOCKING (1/4-20X0.5-IN)
12.	4T-4524	[1]	GUARD-DUST
13.	9S-8006	[1]	PLUG (7/8-14-THD)
14.	2M-9780	[1]	SEAL-O-RING
15.	4T-7810	[1]	SPRING (INNER)
16.	7F-8607	[2]	SEAL-O-RING
17.	4T-4521	[2]	RETAINER
18.	4T-4525	[1]	VALVE GP-CHECK
19.	5B-9318	[1]	BALL
20.	4T-4526	[1]	SEAT
21.	3J-7354	[1]	SEAL-O-RING
22.	1P-7363	[1]	SEAL-O-RING
23.	8T-2361	[1]	SEAL-O-RING
24.	8T-2360	[1]	SEAL-O-RING
25.	6E-0772 YC	[2]	VALVE GP-RELIEF
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP24970381

6E-5653: VALVE GP-MAKEUP

VALVE GP-MAKEUP

6E-5653 VALVE GP-MAKEUP
S/N 3DR1-846; 4BR1-955
PART OF 6E-4951 VALVE GP-BANK 4
AN ATTACHMENT

i00401883 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9T-0657	[1]	PLUG
2.	4K-1388	[1]	SEAL-O-RING
3.	9T-6694	[1]	SPRING
4.	7M-1201	[1]	DOWEL

#SEBP24970382

9T-6695: VALVE GP-MAKEUP

VALVE GP-MAKEUP

9T-6695 VALVE GP-MAKEUP
S/N 3DR1-UP; 4BR1-UP
PART OF 6E-4950, 9T-9183 VALVE GP-BANK, 209-6765 VALVE GP-BANK 3, 209-6766, 9T-9184 VALVE GP-BANK 4
ALSO AN ATTACHMENT

i00435438 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9T-0657	[1]	PLUG
2.	4K-1388	[1]	SEAL-O-RING
3.	9T-6694	[1]	SPRING
4.	7M-1201	[1]	DOWEL

#SEBP24970383

101-0960: VALVE GP-PUMP CONTROL

VALVE GP-PUMP CONTROL

101-0960 VALVE GP-PUMP CONTROL
S/N 3DR1-UP; 4BR1-UP
PART OF 6E-6272 PUMP GP-PISTON

i00462610 SEBP2497

1010960 VALVE GP-PUMP CONTROL Parts scheme

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9T-3816	[1]	SPOOL
2.	9T-3815	[1]	SEAT
3.	9T-3814	[1]	SPRING
4.	5L-4758	[1]	SEAL-O-RING
5.	9T-3813	[1]	PLUG (ADJ)
6.	9S-8002	[1]	PLUG (7/16-20-THD)
7.	3J-7354	[1]	SEAL-O-RING
8.	9T-7062	[1]	BODY
9.	3J-6021	[3]	PLUG
10.	6E-0231	[1]	SEAT-CHECK VALVE
11.	7L-8316	[1]	SETSCREW-SOCKET (10-32X2.54-IN)
12.	9T-3809	[1]	SPOOL
13.	9T-3810	[1]	SEAT
14.	9T-6858	[1]	SPRING
15.	9T-3812	[1]	SEAT
16.	8T-7931	[1]	SETSCREW (1/2-20-THD)
17.	1J-9671	[1]	SEAL-O-RING
18.	9S-8003	[1]	PLUG (1/2-20-THD)
19.	3E-4354	[1]	BALL
20.	2S-9600	[1]	DOWEL

#SEBP24970384

6E-0772: VALVE GP-RELIEF

VALVE GP-RELIEF

6E-0772 VALVE GP-RELIEF
S/N 3DR1-UP; 4BR1-UP
PART OF 6E-4954, 9T-9182 VALVE GP-CONTROL
ALSO AN ATTACHMENT

i00396602 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	4K-1388	[1]	SEAL-O-RING
2.	6E-0358	[1]	RING-BACKUP
3.	5K-9090	[1]	SEAL-O-RING

#SEBP24970385

104-7430: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

104-7430 BULLDOZER AR-PWR ANGLE & TILT
S/N 4GP1-UP
ADJUSTABLE PITCH
AN ATTACHMENT

i01205577 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
104-7412 Y	[1]	BLADE GP-ANGLING
104-7435 Y	[1]	C-FRAME GP-POWER ANGLING
106-1286 Y	[2]	CYLINDER GP-ANGLING
		-OR-
137-8456 Y	[2]	CYLINDER GP-ANGLING
		-OR-
152-6482 Y	[2]	CYLINDER GP-ANGLING
105-9822 Y	[2]	CYLINDER GP-BULLDOZER LIFT
		-OR-
167-7551 CY	[2]	CYLINDER GP-BULLDOZER LIFT
106-3255 Y	[1]	CYLINDER GP-TILT
		-OR-
151-4861 Y	[1]	CYLINDER GP-TILT
		-OR-
160-0045 Y	[1]	CYLINDER GP-BULLDOZER TILT
106-4171 Y	[1]	LINES GP-ANGLE & TILT
137-9370 Y	[1]	LINES GP-BULLDOZER
104-7425 Y	[1]	LINK GP-PITCH
135-6416 Y	[1]	PIN GP

107-8126	[2]	BEARING
		(BEARING MUST BE PRESSED INTO C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
8T-7371	[1]	PLATE-SERIAL NUMBER
		(LOCATED BACK OF MOLDBOARD-NEAR THE TOP AT THE RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

#SEBP24970386

107-6810: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

107-6810 BULLDOZER AR-PWR ANGLE & TILT
S/N 4FP1-UP
LGP-ADJUSTABLE PITCH
AN ATTACHMENT

i01581559 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
108-8585 Y	[1]	BLADE GP-ANGLING
108-3925 Y	[1]	C-FRAME GP
106-1286 Y	[2]	CYLINDER GP-ANGLING
		-OR-
137-8456 Y	[2]	CYLINDER GP-ANGLING
		-OR-
152-6482 Y	[2]	CYLINDER GP-ANGLING
105-9822 Y	[2]	CYLINDER GP-BULLDOZER LIFT
		-OR-
167-7551 Y	[2]	CYLINDER GP-BULLDOZER LIFT
106-3255 Y	[1]	CYLINDER GP-TILT
		-OR-
151-4861 Y	[1]	CYLINDER GP-TILT
		-OR-
160-0045 Y	[1]	CYLINDER GP-BULLDOZER TILT
109-0238 Y	[1]	LINES GP-ANGLE & TILT
137-9370 Y	[1]	LINES GP-BULLDOZER
104-7425 Y	[1]	LINK GP-PITCH
135-6416 Y	[1]	PIN GP

107-8126	[2]	BEARING (SPECIAL)
		(PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
Y		SEPARATE ILLUSTRATION

#SEBP24970387

133-9149: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

133-9149 BULLDOZER AR-PWR ANGLE & TILT
S/N 4GP1-UP
ADJUSTABLE PITCH
AN ATTACHMENT

i01047692 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
104-7412 Y	[1]	BLADE GP-ANGLING

104-7435 Y	[1]	C-FRAME GP-POWER ANGLING
137-8456 Y	[2]	CYLINDER GP-ANGLING
		-OR-
152-6482 Y	[2]	CYLINDER GP-ANGLING
106-3255 Y	[1]	CYLINDER GP-TILT
		-OR-
151-4861 Y	[1]	CYLINDER GP-TILT
		-OR-
160-0045 Y	[1]	CYLINDER GP-BULLDOZER TILT

106-4171 Y	[1]	LINES GP-ANGLE & TILT
104-7425 Y	[1]	LINK GP-PITCH

107-8126	[2]	BEARING
		(BEARING MUST BE PRESSED INTO C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
8T-7371	[1]	PLATE-SERIAL NUMBER
		(LOCATED BACK OF MOLDBOARD-NEAR THE TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP24970388

133-9151: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

133-9151 BULLDOZER AR-PWR ANGLE & TILT
S/N 4FP1-UP
LGP-ADJUSTABLE PITCH
AN ATTACHMENT

i01047697 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
108-8585 Y	[1]	BLADE GP-ANGLING
108-3925 Y	[1]	C-FRAME GP
		-OR-
137-8456 Y	[2]	CYLINDER GP-ANGLING
		-OR-
152-6482 Y	[2]	CYLINDER GP-ANGLING
106-3255 Y	[1]	CYLINDER GP-TILT
		-OR-
151-4861 Y	[1]	CYLINDER GP-TILT
		-OR-
160-0045 Y	[1]	CYLINDER GP-BULLDOZER TILT
109-0238 Y	[1]	LINES GP-ANGLE & TILT
104-7425 Y	[1]	LINK GP-PITCH

107-8126	[2]	BEARING (SPECIAL)
		(PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
8T-7371	[1]	PLATE-SERIAL NUMBER
		(LOCATED BACK OF MOLDBOARD-NEAR THE TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP24970389

108-3925: C-FRAME GP

C-FRAME GP

108-3925 C-FRAME GP
S/N 4FP1-UP
PART OF 107-6810, 133-9151 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT

i00482461 SEBP2497

For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	147-4356	[1]	FRAME AS
1A.	147-4357	[1]	BUSHING
8.	4Y-4905 B	[12]	WASHER (79X175X2-MM THK)
9.	7P-6711	[8]	WASHER (52X108X3-MM THK)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	104-4746	[2]	DOWEL
12.	108-5794	[4]	PLUG-PIPE
13.	104-7391	[1]	CAP
14.	8T-5041 M	[2]	BOLT (M12X1.75X120-MM)
15.	8T-4123	[3]	WASHER (3.62X5.75X0.375-MM THK)
16.	147-4359	[1]	PIN
17.	147-4358	[1]	PIN
18.	104-7394	[1]	SPACER (64X76.5X72-MM THK)
19.	124-5235 B	[6]	SHIM (0.8-MM THK)
20.	124-5741	[2]	PIN
21.	105-2058	[1]	BRACKET AS
22.	7X-2465 M	[4]	BOLT (M24X3X180-MM)
23.	8T-1482	[4]	WASHER-HARD (26X50X8-MM THK)
24.	104-4816	[2]	SHIM (35-MM THK)(35MM THK)
25.	104-7498	[2]	RETAINER
26.	104-7434	[1]	RETAINER
27.	7X-2562 M	[5]	BOLT (M20X2.5X45-MM)
28.	104-4817	[1]	PIN
29.	8G-5747	[4]	SPACER (45X50X15-MM THK)
30.	8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
31.	089-8249	[2]	SPACER (64X72X13-MM THK)
32.	124-5234	[2]	RETAINER
33.	104-4747	[2]	PIN
34.	124-5233	[2]	PIN
35.	2G-5676 B	[12]	WASHER (1.781X4X0.06-IN THK)
	B		USE AS REQUIRED
	M		METRIC PART