HYDRAULIC SYSTEM
LINES GP-PILOTOPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
LINES GP-PILOT
#SEBP25230410
109-6035: INSTALLATION AR-PILOT LINES
109-6035 INSTALLATION AR-PILOT LINES
S/N 6DN1-UP; 8FN1-UP
2 SPEED HAMMER
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2 SPEED HAMMER
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 111-6494 Y | [1] | LINES GP-PILOT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25230411
159-7744: LEVER GP-CONTROL
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | |
| 2. | 121-7057 | [1] | KNOB (HYDRAULIC CONTROLS LOCKOUT) | |
| 3. | 117-6269 | [1] | LEVER | |
| 4. | 117-6270 | [1] | SUPPORT AS | |
| 5. | 117-6272 | [1] | LEVER AS | |
| 6. | 5D-4822 | [3] | RING-RETAINING | |
| 7. | 117-6271 | [1] | SPRING | |
| 8. | 117-6274 | [1] | PIN | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP25230412
116-9113: LINES GP-AUXILIARY HYDRAULIC
116-9113 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
LONG BOOM
PART OF 4Q-4486 DEMOLITION AR
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
LONG BOOM
PART OF 4Q-4486 DEMOLITION AR
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-1782 | [1] | TUBE AS | |
| 2. | 121-1783 | [1] | TUBE AS | |
| 3. | 121-1784 | [1] | TUBE AS | |
| 4. | 121-1785 | [1] | TUBE AS | |
| 5. | 7Y-3732 | [8] | CLIP | |
| 6. | 124-0909 | [8] | CLIP | |
| 7. | 3V-9744 | [1] | SPACER | |
| 8. | 121-1946 | [3] | PLATE | |
| 9. | 121-1674 | [3] | PLATE | |
| 10. | 121-1675 | [1] | PLATE | |
| 11. | 121-1676 | [1] | PLATE | |
| 12. | 121-1677 | [3] | PLATE | |
| 13. | 121-1758 | [2] | PLATE | |
| 14. | 7X-2555 M | [6] | BOLT (M16X2X80-MM) | |
| 15. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 17. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 18. | 8T-4648 M | [6] | BOLT (M12X1.75X70-MM) | |
| 19. | 7X-2554 M | [12] | BOLT (M16X2X70-MM) | |
| 20. | 8T-7338 M | [6] | BOLT (M16X2X45-MM) | |
| 21. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 9X-8257 | [24] | WASHER (17.5X30X3.5-MM THK) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 5K-9090 | [4] | SEAL-O-RING | |
| 25. | 7Y-5691 I | [1] | HOSE AS | |
| 26. | 121-1769 I | [1] | HOSE AS | |
| 27. | 1P-5767 | [4] | FLANGE-HALF | |
| 28. | 6V-8635 | [1] | CONNECTOR | |
| 29. | 7M-8485 | [1] | SEAL-O-RING | |
| 30. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230413
116-9114: LINES GP-AUXILIARY HYDRAULIC
116-9114 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
3.2M STICK
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
3.2M STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-1786 | [1] | TUBE AS | |
| 2. | 142-6585 | [1] | TUBE AS | |
| 3. | 121-1962 I | [1] | HOSE AS | |
| 4. | 109-6214 I | [1] | HOSE AS | |
| 5. | 7Y-3732 | [4] | CLIP | |
| 6. | 124-0909 | [4] | CLIP | |
| 7. | 137-1594 | [2] | VALVE GP-MANUAL | |
| 8. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 9. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 10. | 1P-5767 | [4] | FLANGE-HALF | |
| 11. | 6V-0400 | [2] | FLANGE-HALF | |
| 12. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 14. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 15. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 16. | 8T-7338 M | [4] | BOLT (M16X2X45-MM) | |
| 17. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 20. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 21. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230414
121-1907: LINES GP-AUXILIARY HYDRAULIC
121-1907 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/LONG BOOM
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/LONG BOOM
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-6123 I | [1] | HOSE AS | |
| 2. | 5I-7456 I | [1] | HOSE AS | |
| 3. | 6K-0806 | [15] | STRAP-CABLE | |
| 4. | 6C-6251 | [2] | PLATE | |
| 5. | 2P-1279 | [2] | LOCKNUT (9/16-18-THD) | |
| 6. | 6V-8627 | [1] | ELBOW | |
| 7. | 6V-8993 | [2] | UNION | |
| 8. | 3J-1907 | [1] | SEAL-O-RING | |
| 9. | 4J-5477 | [6] | SEAL-O-RING | |
| 10. | 7Y-3732 | [4] | CLIP | |
| 11. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 12. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230415
121-1908: LINES GP-AUXILIARY HYDRAULIC
121-1908 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/LONG STICK
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/LONG STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7463 I | [1] | HOSE AS | |
| 2. | 7Y-5806 I | [1] | HOSE AS | |
| 3. | 6K-0806 | [6] | STRAP-CABLE | |
| 4. | 6C-6382 | [1] | PLATE | |
| 5. | 121-1806 | [1] | BLOCK | |
| 6. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 7. | 6V-4144 | [1] | COUPLER AS-QUICK CONNECT (FLUID SAMPLING) | |
| 8. | 6V-4433 | [1] | FITTING | |
| 9. | 6V-8641 | [1] | CONNECTOR | |
| 10. | 6V-8979 | [1] | ELBOW | |
| 11. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 12. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 4J-5477 | [3] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230416
121-1909: LINES GP-AUXILIARY HYDRAULIC
121-1909 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
2SP/MEDIUM STICK
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2SP/MEDIUM STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6641 I | [1] | HOSE AS | |
| 2. | 7I-8457 I | [1] | HOSE AS | |
| 3. | 6K-0806 | [8] | STRAP-CABLE | |
| 4. | 6C-6382 | [1] | PLATE | |
| 5. | 121-1806 | [1] | BLOCK | |
| 6. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 7. | 6V-4144 | [1] | COUPLER AS-QUICK CONNECT (FLUID SAMPLING) | |
| 8. | 6V-4433 | [1] | FITTING | |
| 9. | 6V-8641 | [1] | CONNECTOR | |
| 10. | 6V-8979 | [1] | ELBOW | |
| 11. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 12. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 4J-5477 | [3] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230417
121-1910: LINES GP-AUXILIARY HYDRAULIC
121-1910 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/SHORT STICK
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2SP HAMMER/SHORT STICK
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7I-8457 I | [1] | HOSE AS | |
| 2. | 6K-0806 | [3] | STRAP-CABLE | |
| 3. | 121-1806 | [1] | BLOCK | |
| 4. | 6V-4144 | [1] | COUPLER AS-QUICK CONNECT (FLUID SAMPLING) | |
| 5. | 6V-4433 | [1] | FITTING | |
| 6. | 6V-8627 | [1] | ELBOW | |
| 7. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 8. | 3J-1907 | [2] | SEAL-O-RING | |
| 9. | 4J-5477 | [1] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230418
121-1912: LINES GP-AUXILIARY HYDRAULIC
121-1912 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
SHORT STICK (R 2.0 D)
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
SHORT STICK (R 2.0 D)
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-1777 I | [1] | HOSE AS | |
| 2. | 121-1965 I | [1] | HOSE AS | |
| 3. | 137-1594 | [2] | VALVE GP-MANUAL | |
| 4. | 8T-4194 M | [12] | BOLT (M12X1.75X50-MM) | |
| 5. | 1P-5767 | [4] | FLANGE-HALF | |
| 6. | 6V-0400 | [2] | FLANGE-HALF | |
| 7. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 11. | 1P-3703 | [1] | SEAL-RECTANGULAR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP25230419
121-1921: LINES GP-AUXILIARY HYDRAULIC
121-1921 LINES GP-AUXILIARY HYDRAULIC
S/N 6DN1-UP; 8FN1-UP
2.65M & 2.5M MEDIUM STICKS
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
2.65M & 2.5M MEDIUM STICKS
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-1869 | [1] | TUBE AS | |
| 2. | 142-6584 | [1] | TUBE AS | |
| 3. | 121-1965 I | [1] | HOSE AS | |
| 4. | 121-1777 I | [1] | HOSE AS | |
| 5. | 7Y-3732 | [4] | CLIP | |
| 6. | 124-0909 | [4] | CLIP | |
| 7. | 137-1594 | [2] | VALVE GP-MANUAL | |
| 8. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 9. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 10. | 1P-5767 | [4] | FLANGE-HALF | |
| 11. | 6V-0400 | [2] | FLANGE-HALF | |
| 12. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 13. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 14. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 15. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 16. | 8T-7338 M | [4] | BOLT (M16X2X45-MM) | |
| 17. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 20. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 21. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
