AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-3016 FILTER GP-OIL -HYDRAULIC S/N 4BS1-UP PART OF 145-4673 LINES GP-HYDRAULIC OIL COOLER 950G WHEEL LOADER


HYDRAULIC SYSTEM
FILTER GP
FRAME AND BODY
GUARD GP
HYDRAULIC SYSTEM
HYDRAULIC GP
KICKOUT & POSITIONER GP

WHEEL LOADER 950G WHEEL LOADER 4BS
 950G Wheel Loader 4BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2527 950G 4BS   (1996)

HYDRAULIC SYSTEM

FILTER GP
FILTER GP-OIL
134-3016 FILTER GP-OIL
 

#SEBP25270550
 

134-3016: FILTER GP-OIL

134-3016 FILTER GP-OIL -HYDRAULIC
S/N 4BS1-UP
PART OF 145-4673 LINES GP-HYDRAULIC OIL COOLER
i00600867 SEBP2527
1343016 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 8C-3446 [1] VALVE-SAMPLING  
3. 3J-7354 [1] SEAL-O-RING  
4. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
5. 7X-8549 [1] SWITCH AS-PRESSURE (HYD OIL FILTER BYPASS)  
6. 3J-1907 [1] SEAL-O-RING  
 

#SEBP25270551
 

211-6947: GUARD GP-LIFT CYLINDER

211-6947 GUARD GP-LIFT CYLINDER -LIFT
S/N 4BS1-UP
i01788043 SEBP2527
2116947 GUARD GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-8318 Y [1] GUARD GP-LIFT CYLINDER (LH)  
2. 216-8319 Y [1] GUARD GP-LIFT CYLINDER (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270552
 

216-8318: GUARD GP-LIFT CYLINDER

216-8318 GUARD GP-LIFT CYLINDER -LIFT, LH
S/N 4BS1-UP
PART OF 211-6947 GUARD GP-LIFT CYLINDER
i01796642 SEBP2527
2168318 GUARD GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8889 [1] PLATE  
2. 211-3287 [1] SHEET-RUBBER  
3. 211-5004 [1] PLATE AS  
4. 211-5006 [1] PLATE  
5. 216-7752 [1] PLATE AS  
  8T-7501 M [2] STUD-WELD (M10X1.5X38-MM)  
6. 224-9871 [1] CLIP  
7. 224-9872 [1] CLIP  
8. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
9. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
10. 7X-7729 [4] WASHER (11X25X3-MM THK)  
11. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
12. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP25270553
 

216-8319: GUARD GP-LIFT CYLINDER

216-8319 GUARD GP-LIFT CYLINDER -LIFT, RH
S/N 4BS1-UP
PART OF 211-6947 GUARD GP-LIFT CYLINDER
i01796643 SEBP2527
2168319 GUARD GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8889 [1] PLATE  
2. 211-3287 [1] SHEET-RUBBER  
3. 211-5004 [1] PLATE AS  
4. 211-5006 [1] PLATE  
5. 216-7752 [1] PLATE AS  
  8T-7501 M [2] STUD-WELD (M10X1.5X38-MM)  
6. 224-9871 [1] CLIP  
7. 224-9872 [1] CLIP  
8. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
9. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
10. 7X-7729 [4] WASHER (11X25X3-MM THK)  
11. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
12. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
13. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP25270554
 

112-6985: HYDRAULIC AR-2 VALVE

112-6985 HYDRAULIC AR-2 VALVE
S/N 4BS1-UP
PART OF 112-6947 GENERAL AR
i00492855 SEBP2527
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-6986 Y [1] CYLINDER & SEAL GP-LIFT (LH)  
  112-6987 Y [1] CYLINDER & SEAL GP-LIFT (RH)  
  112-6988 Y [1] CYLINDER & SEAL GP-TILT  
  112-6990 Y [1] LINES GP-HYDRAULIC  
  112-6991 Y [1] LINES GP-LIFT CYLINDER  
  112-6993 Y [1] LINES GP-TILT CYLINDER  
  112-6994 Y [1] MOUNTING GP-HYDRAULIC TANK  
  112-6995 Y [1] PUMP & MTG GP-HYDRAULIC (STEERING, IMPL, PILOT, BRAKE)  
  129-1243 Y [1] TANK GP-HYDRAULIC  
  112-6998 Y [1] VALVE & MTG GP-MAIN CONTROL (2-FUNCTION)  
  154-5713 Y [1] VALVE GP-LOWERING CONTROL (DEAD ENGINE, LIFT ARM LOWER)(BUCKET)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270555
 

120-6946: HYDRAULIC AR-3 VALVE

120-6946 HYDRAULIC AR-3 VALVE
S/N 4BS1-UP
3 VALVE
i01605072 SEBP2527
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  150-9053 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
    -OR-
  207-7448 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
  126-7738 Y [1] LINES GP-FRONT  
  120-6947 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270556
 

120-6949: HYDRAULIC AR-3 VALVE

120-6949 HYDRAULIC AR-3 VALVE -LOGGING
S/N 4BS1-UP
3 VALVE
PART OF 120-6948 LOGGING AR
i01605102 SEBP2527
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  143-4615 Y [1] ARM AS-LIFT  
  150-9053 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
    -OR-
  207-7448 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
  153-4948 Y [1] CYLINDER & SEAL GP-TILT  
  126-7738 Y [1] LINES GP-FRONT  
  151-0884 Y [1] LINES GP-TILT CYLINDER  
  120-6950 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270557
 

112-6989: KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP
S/N 4BS1-320
PART OF 112-6949 CHASSIS AR, 148-5657 ELECTRICAL AR
i00492887 SEBP2527
1126989 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 117-1324 [1] CONTROL GP-POSITION (TILT)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
17. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
18. 124-4592 [1] ROD END  
19. 130-8609 [1] HARNESS AS  
20. 163-0094 [1] ARM-BAIL  
21. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
22. 131-3253 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
24. [1] ROD  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270558
 

112-6989: KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP
S/N 4BS321-UP
PART OF 148-5657 ELECTRICAL AR
Type 1
i00997562 SEBP2527
1126989 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 117-1324 [1] CONTROL GP-POSITION (TILT)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
17. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
18. 124-4592 [1] ROD END  
19. 130-8609 [1] HARNESS AS  
20. 163-0094 [1] ARM-BAIL  
21. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
22. 131-3253 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
24. 3T-3045 C [1] CLIP AS  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270559
 

112-6989: KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP
S/N 4BS321-UP
PART OF 148-5657 ELECTRICAL AR
Type 2
i01237224 SEBP2527
1126989 KICKOUT & POSITIONER GP Parts scheme 1126989 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING  
2. 2L-6726 [1] RING-RETAINING  
4. 4E-2250 [1] HOUSING  
5. 4E-2453 [1] SHAFT  
6. 4E-7088 [1] LEVER  
7. 4V-1939 [4] CLAMP  
8. 4V-4840 [1] MAGNET AS  
9. 5V-6439 [2] PLATE  
10. 6D-3025 [2] BALL BEARING  
11. 7I-3236 [1] SUPPORT AS  
12. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
13. 7X-7662 [1] ROD END  
14. 8C-5607 [6] MOUNT-ISOLATION  
15. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
16. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
17. 124-4592 [1] ROD END  
18. 125-0901 [1] ROD  
19. 131-3253 [1] TUBE AS  
20. 131-3255 [1] BRACKET  
21. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
22. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
23. 161-8904 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
  9X-1813 E SLEEVE (13CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 163-0094 [1] ARM-BAIL  
25. 164-3583 [1] CONTROL GP-POSITION (TILT)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
26. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
27. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5C-7261 M [1] NUT (M8X1.25-THD)  
30. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
31. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
32. 6V-8132 M [2] BOLT (M24X3X120-MM)  
33. 6V-8237 [2] WASHER (26X44X4-MM THK)  
34. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
35. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
36. 8C-8451 M [4] BOLT (M6X1X40-MM)  
37. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [3] NUT (M10X1.5-THD)  
39. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
40. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
45. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}

Caterpillar Parts SIS Catalog 950G :

CYLINDER GP-TILT
151-8206 CYLINDER GP-TILT
CYLINDER GP-TILT
151-8206 CYLINDER GP-TILT
CYLINDER GP-TILT
118-9001 CYLINDER GP-TILT
CYLINDER GP-TILT
118-9001 CYLINDER GP-TILT
CYLINDER GP-LIFT
125-0024 CYLINDER GP-LIFT
CYLINDER GP-LIFT
125-0024 CYLINDER GP-LIFT
CYLINDER GP-LIFT
118-8296 CYLINDER GP-LIFT
CYLINDER GP-LIFT
118-8296 CYLINDER GP-LIFT
GUARD GP-LIFT CYLINDER
211-6947 GUARD GP-LIFT CYLINDER
GUARD GP-LIFT CYLINDER
216-8318 GUARD GP-LIFT CYLINDER
GUARD GP-LIFT CYLINDER
216-8319 GUARD GP-LIFT CYLINDER
112-6985 HYDRAULIC AR-2 VALVE
120-6946 HYDRAULIC AR-3 VALVE
120-6949 HYDRAULIC AR-3 VALVE
KICKOUT & POSITIONER GP
112-6989 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
112-6989 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.