112-6989 KICKOUT & POSITIONER GP S/N 4BS321-UP PART OF 148-5657 ELECTRICAL AR Type 3 950G WHEEL LOADER

HYDRAULIC SYSTEM

KICKOUT & POSITIONER GP

0. 112-6989 KICKOUT &

CYLINDER GP

1. 190-7410 LINES GP-C

LINES GP-FRONT

2. 126-7738 LINES GP-F

LINES GP-HYDRAULIC

3. 112-6990 LINES GP-H

COOLER GP

4. 112-6969 LINES GP-H
5. 145-4673 LINES GP-H
6. 145-4673 LINES GP-H
7. 145-4673 LINES GP-H
8. 145-4673 LINES GP-H

LINES GP-CYLINDER

9. 112-6991 LINES GP-L
0. INFORMATION

WHEEL LOADER 950G WHEEL LOADER 4BS
950G Wheel Loader 4BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2527 950G 4BS (1996)

HYDRAULIC SYSTEM

KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP

#SEBP25270560

112-6989: KICKOUT & POSITIONER GP

KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP
S/N 4BS321-UP
PART OF 148-5657 ELECTRICAL AR
Type 3

i01731886 SEBP2527

1126989 KICKOUT & POSITIONER GP Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-3429	[1]	RING-RETAINING
2.	2L-6726	[1]	RING-RETAINING
4.	168-0402 C	[1]	HOUSING
5.	168-8774 C	[1]	SHAFT
6.	4E-7088	[1]	LEVER
7.	4V-1939	[4]	CLAMP
8.	4V-4840	[1]	MAGNET AS
9.	5V-6439	[2]	PLATE
10.	6D-3025	[2]	BALL BEARING
11.	7I-3236	[1]	SUPPORT AS
12.	7X-7464 M	[1]	SETSCREW-HEX SOCKET (M10X1.5-THD)
13.	7X-7662	[1]	ROD END
14.	8C-5607	[6]	MOUNT-ISOLATION
15.	8C-5608	[3]	SPACER (6.5X9.5X25.4-MM THK)
16.	8T-3601	[4]	SETSCREW-SOCKET (1/4-20-THD)
17.	124-4592	[1]	ROD END
18.	125-0901	[1]	ROD
19.	131-3253	[1]	TUBE AS
20.	131-3255	[1]	BRACKET
21.	155-4186	[1]	HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)
22.	155-5167	[1]	COVER AS
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
23.	161-8904 Y	[1]	SENSOR GP-POSITION (ROTARY)(LIFT)
	9X-1813 E		SLEEVE (13CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	163-0094	[1]	ARM-BAIL
25.	164-3583	[1]	CONTROL GP-POSITION (TILT)
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-5617	[1]	FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)
26.	125-0380 M	[1]	NUT-HEX (M8X1.25-THD, LH)
27.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
28.	5C-2890 M	[3]	NUT (M6X1-THD)
29.	5C-7261 M	[1]	NUT (M8X1.25-THD)
30.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
31.	6V-2313 M	[2]	BOLT (M5X0.8X30-MM)
32.	6V-8132 M	[2]	BOLT (M24X3X120-MM)
33.	6V-8237	[2]	WASHER (26X44X4-MM THK)
34.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
35.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
36.	8C-8451 M	[4]	BOLT (M6X1X40-MM)
37.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
38.	8T-4133 M	[3]	NUT (M10X1.5-THD)
39.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
40.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
41.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
42.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
43.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
44.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
45.	9X-2480 M	[3]	BOLT (M6X1X45-MM)
46.	6V-0894 C	[1]	SEAL-O-RING
47.	166-2232 C	[1]	SEAL-LIP TYPE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270561

190-7410: LINES GP-COUPLER

LINES GP-COUPLER

190-7410 LINES GP-COUPLER
S/N 4BS1-UP
PART OF 195-7517, 206-4054 CONTROL AR-QUICK COUPLER

i01476342 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	9V-9116	[2]	SPACER (11.11X19.05X165-MM THK)
3.	106-8704	[2]	SUPPRESSOR AS-ARC
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	130-5300	[1]	CLIP
5.	185-2270 Y	[1]	VALVE GP-DIVERTER (QUICK COUPLER)(QUICK COUPLER)
6.	186-0192	[1]	HARNESS AS-WORK TOOL (QUICK COUPLER)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
7.	194-6762	[1]	TUBE AS
8.	194-6765	[1]	TUBE AS
9.	194-6766	[1]	TUBE AS
10.	194-6767	[1]	TUBE AS
11.	194-6768 I	[2]	HOSE AS
12.	194-6769 I	[2]	HOSE AS
13.	194-6770	[1]	GUARD
14.	194-6772	[1]	BLOCK
15.	141-6348 M	[2]	BOLT (M10X1.5X65-MM)
16.	201-6849	[1]	SWITCH AS (QUICK COUPLER)
	3E-8825	[1]	LAMP (24-VOLT)
	189-0789	[1]	ACTUATOR
17.	2B-2404	[14]	CLIP
18.	3J-1907	[4]	SEAL-O-RING
19.	4D-7794	[1]	CLIP
20.	4J-5477	[10]	SEAL-O-RING
21.	5K-8451	[1]	CLIP (LOOP)
22.	6V-8627	[1]	ELBOW
23.	6V-8641	[3]	CONNECTOR
24.	6V-9828	[2]	CAP (ORFS)
25.	8T-3851 M	[4]	BOSS-WELD (M10X1.5X17.5-MM)
26.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
27.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
28.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
29.	9M-8406	[7]	CLIP (LOOP)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270562

126-7738: LINES GP-FRONT

LINES GP-FRONT

126-7738 LINES GP-FRONT
S/N 4BS1-UP
PART OF 120-6946, 120-6949 HYDRAULIC AR-3 VALVE

i00515137 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-3704	[2]	SEAL-RECTANGULAR
2.	3W-3392 I	[2]	HOSE AS
3.	5H-4020	[2]	COVER
4.	6V-0852	[2]	CAP-DUST
5.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
6.	130-8219	[1]	PLATE
7.	149-8731	[1]	BRACKET
8.	149-8732	[1]	BRACKET
9.	130-9934	[1]	TUBE AS
	7M-8485	[1]	SEAL-O-RING
	8J-0426	[1]	PLUG
10.	130-9935	[1]	TUBE AS
	7M-8485	[1]	SEAL-O-RING
	8J-0426	[1]	PLUG
11.	161-1364	[1]	TUBE AS (LH)
	6K-1694	[3]	CLIP
12.	161-1365	[1]	TUBE AS (RH)
	6K-1694	[3]	CLIP
13.	137-1978 I	[1]	HOSE AS
14.	1P-4579	[2]	FLANGE-HALF
15.	3J-1907	[2]	SEAL-O-RING
16.	4J-0522	[7]	SEAL-O-RING
17.	4J-0524	[1]	SEAL-O-RING
18.	6V-0397	[14]	FLANGE-HALF
19.	8T-2561	[6]	WASHER-HARD (10.5X28.5X5-MM THK)
20.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4133 M	[6]	NUT (M10X1.5-THD)
22.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
23.	8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
24.	8T-4183 M	[32]	BOLT (M12X1.75X40-MM)
25.	8T-4192 M	[4]	BOLT (M12X1.75X25-MM)
26.	8T-4223	[50]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP25270563

112-6990: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

112-6990 LINES GP-HYDRAULIC
S/N 4BS1-UP
PART OF 112-6985 HYDRAULIC AR-2 VALVE

i00735991 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2201 C	[4]	CLAMP-HOSE
2.	8T-4984 C	[2]	CLAMP-HOSE
3.	5P-1296 E	[2]	HOSE (15-CM EACH)
4.	5P-1293 CE	[1]	HOSE (13-CM)
5.	6V-0852	[1]	CAP-DUST
6.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
7.	7V-6428	[1]	KEEPER
8.	8X-4886 C	[1]	ELBOW
9.	133-1963	[1]	VALVE-BREAKER RELIEF
10.	125-2041 I	[1]	HOSE AS
11.	129-4349	[1]	TUBE AS
	6V-0422	[2]	PLUG
12.	133-6615	[1]	PLATE
13.	134-8203 I	[1]	HOSE AS
14.	144-3006 C	[1]	TUBE AS
15.	144-3007 C	[1]	TUBE AS
16.	144-3008 C	[1]	TUBE AS
17.	144-3009 C	[1]	TUBE AS
18.	146-6213 CI	[1]	HOSE AS
19.	1P-3704	[1]	SEAL-RECTANGULAR
20.	1P-4579	[4]	FLANGE-HALF
21.	3D-2824	[1]	SEAL-O-RING
22.	3E-6735 C	[1]	SEAL-O-RING
23.	3J-1907	[2]	SEAL-O-RING
24.	4J-0522 C	[5]	SEAL-O-RING
25.	4J-0524	[2]	SEAL-O-RING
26.	4J-0527 C	[1]	SEAL-O-RING
27.	5P-7470	[1]	CLIP (SLOT)
28.	5P-7471	[1]	CLIP (TAB)
29.	5P-8182	[1]	GROMMET (46-MM ID)
30.	6V-0397	[8]	FLANGE-HALF
31.	6V-8397	[1]	SEAL-O-RING
32.	7G-3413	[1]	CLIP (SLOT)
33.	7G-3414	[1]	CLIP (TAB)
34.	7G-3415	[1]	GROMMET
35.	8C-8992 M	[1]	BOLT-LOCKING (M12X1.75X30-MM)
36.	8T-0788	[1]	ELBOW
37.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
38.	8T-4140 CM	[4]	BOLT (M16X2X60-MM)
39.	8T-4183 M	[20]	BOLT (M12X1.75X40-MM)
40.	8T-4194 M	[2]	BOLT (M12X1.75X50-MM)
41.	8T-4223 C	[37]	WASHER-HARD (13.5X25.5X3-MM THK)
42.	8T-4910 CM	[2]	BOLT (M12X1.75X60-MM)
43.	8T-4956 CM	[8]	BOLT (M12X1.75X35-MM)
44.	8T-6663	[1]	ADAPTER-PORT
45.	8T-6868 CM	[6]	BOLT (M12X1.75X80-MM)
46.	8T-7338 M	[4]	BOLT (M16X2X45-MM)
47.	9M-2092 C	[1]	SEAL-O-RING
48.	9X-8257	[8]	WASHER (17.5X30X3.5-MM THK)
49.	7X-3392	[4]	WASHER-HARD (13.5X22.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP25270564

112-6969: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

112-6969 LINES GP-HYDRAULIC OIL COOLER
S/N 4BS1-256
PART OF 112-6949 CHASSIS AR

i00492789 SEBP2527

1126969 LINES GP-HYDRAULIC OIL COOLER Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5D-1026	[4]	CLAMP-BAND
2.	6V-0852	[2]	CAP-DUST
3.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
4.	6V-5258	[1]	ADAPTER
5.	6Y-4052 I	[1]	HOSE AS
6.	5P-2094 E		HOSE (13CM)
7.	7X-7958	[6]	CLAMP-HOSE
8.	8T-0083	[1]	TEE-UNION
9.	8T-3312	[1]	TEE
10.	8X-6644	[2]	HOSE
11.	9C-1079 I	[1]	HOSE AS
12.	9T-6005	[1]	VALVE GP-CHECK
13.	111-7309	[2]	HOSE
14.	116-9345 I	[1]	HOSE AS
15.	117-1913 I	[1]	HOSE AS
16.	129-3514	[1]	TUBE AS
17.	129-3516	[1]	TUBE AS
18.	129-3517	[1]	TUBE AS
19.	129-3518	[1]	TUBE AS
20.	129-3519	[1]	TUBE AS
21.	129-3520	[1]	TUBE
22.	129-3521	[1]	TUBE AS
23.	129-3522	[1]	TUBE AS
24.	129-3523	[1]	TUBE AS
25.	129-3524	[1]	TUBE
26.	129-3525	[1]	TUBE AS
27.	129-3526 I	[1]	HOSE AS
28.	129-3527 I	[2]	HOSE AS
29.	124-0174	[5]	CLIP (LOOP)
30.	3D-2824	[3]	SEAL-O-RING
31.	3J-1907	[2]	SEAL-O-RING
32.	3K-0360	[2]	SEAL-O-RING
33.	4S-1962	[2]	CLIP (LOOP)
34.	5K-9090	[3]	SEAL-O-RING
35.	5P-4295	[11]	CLIP
36.	6V-8398	[5]	SEAL-O-RING
37.	6V-8635	[1]	CONNECTOR
38.	6V-8637	[2]	CONNECTOR
39.	6V-8639	[1]	CONNECTOR
40.	6V-9746	[12]	SEAL-O-RING
41.	7D-7233	[1]	CLIP (LOOP)
42.	7M-8485	[2]	SEAL-O-RING
43.	8M-2770	[1]	CLIP (LOOP)
44.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 M	[10]	NUT (M10X1.5-THD)
46.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
47.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
48.	9M-4972	[3]	CLIP (LOOP)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP25270565

145-4673: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4BS1-413
PART OF 112-6949 CHASSIS AR

i00758578 SEBP2527

1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[1]	CAP-DUST
2.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
3.	6W-5458	[2]	SPACER (0.406X0.75X0.5-IN THK)
4.	8C-6712	[1]	ELBOW
5.	8T-0083	[1]	TEE-UNION
6.	134-3016 Y	[1]	FILTER GP-OIL (HYDRAULIC)
7.	146-3197 I	[1]	HOSE AS
8.	146-3198 I	[1]	HOSE AS
9.	146-3199 I	[1]	HOSE AS
10.	146-3200 I	[1]	HOSE AS
11.	146-3201 I	[1]	HOSE AS
12.	146-3202 I	[1]	HOSE AS
13.	146-3204	[1]	BRACKET
14.	150-8380	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	150-8381	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	1S-0994	[9]	CLIP (LOOP)
17.	3D-2824	[5]	SEAL-O-RING
18.	3J-1907	[2]	SEAL-O-RING
19.	3J-7354	[2]	SEAL-O-RING
20.	5G-7020	[1]	CLIP (SLOT)
21.	5G-7021	[1]	CLIP (TAB)
22.	5K-9090	[2]	SEAL-O-RING
23.	5P-7468	[1]	CLIP (SLOT)
24.	5P-7469	[1]	CLIP (TAB)
25.	5P-7854	[6]	CLIP
26.	5P-8444	[1]	GROMMET (37-MM ID)
27.	6V-1889	[17]	CLIP (LOOP)
28.	6V-8398	[2]	SEAL-O-RING
29.	6V-8637	[2]	CONNECTOR
30.	6V-9005	[1]	ELBOW
31.	6V-9007	[3]	ELBOW
32.	6V-9746	[11]	SEAL-O-RING
33.	6V-9853	[1]	ELBOW
34.	7D-7233	[2]	CLIP (LOOP)
35.	7M-8485	[1]	SEAL-O-RING
36.	8D-9671	[2]	CLIP
37.	8T-2353	[1]	ADAPTER
38.	8T-4121	[30]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[11]	NUT (M10X1.5-THD)
40.	8T-4136 M	[17]	BOLT (M10X1.5X25-MM)
41.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
42.	8T-4184 M	[1]	BOLT (M12X1.75X45-MM)
43.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4244 M	[1]	NUT (M12X1.75-THD)
45.	8T-8899	[1]	ELBOW
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270566

145-4673: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4BS414-501
PART OF 112-6949 CHASSIS AR

i01009190 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[1]	CAP-DUST
2.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
3.	6W-5458	[2]	SPACER (0.406X0.75X0.5-IN THK)
4.	8C-6712	[1]	ELBOW
5.	8T-0083	[1]	TEE-UNION
6.	134-3016 Y	[1]	FILTER GP-OIL (HYDRAULIC)
7.	163-0573 CI	[1]	HOSE AS
8.	146-3198 I	[1]	HOSE AS
9.	146-3199 I	[1]	HOSE AS
10.	146-3200 I	[1]	HOSE AS
11.	8R-2477 I	[1]	HOSE AS
12.	146-3202 I	[1]	HOSE AS
13.	146-3204	[1]	BRACKET
14.	150-8380	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	150-8381	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	1S-0994	[9]	CLIP (LOOP)
17.	3D-2824	[5]	SEAL-O-RING
18.	3J-1907	[2]	SEAL-O-RING
19.	3J-7354	[2]	SEAL-O-RING
20.	5G-7020	[1]	CLIP (SLOT)
21.	5G-7021	[1]	CLIP (TAB)
22.	5K-9090	[2]	SEAL-O-RING
23.	5P-7468	[1]	CLIP (SLOT)
24.	5P-7469	[1]	CLIP (TAB)
25.	5P-7854	[6]	CLIP
26.	5P-8444	[1]	GROMMET (37-MM ID)
27.	6V-1889	[17]	CLIP (LOOP)
28.	6V-8398	[2]	SEAL-O-RING
29.	6V-8637	[2]	CONNECTOR
30.	6V-8625 C	[1]	ELBOW
31.	6V-9007	[3]	ELBOW
32.	6V-9746	[11]	SEAL-O-RING
33.	6V-9853	[1]	ELBOW
34.	7D-7233	[2]	CLIP (LOOP)
35.	7M-8485	[1]	SEAL-O-RING
36.	8D-9671	[2]	CLIP
37.	8T-2353	[1]	ADAPTER
38.	8T-4121	[30]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[11]	NUT (M10X1.5-THD)
40.	8T-4136 M	[17]	BOLT (M10X1.5X25-MM)
41.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
42.	8T-4184 M	[1]	BOLT (M12X1.75X45-MM)
43.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4244 M	[1]	NUT (M12X1.75-THD)
45.	8T-8899	[1]	ELBOW
46.	3K-0360 C	[1]	SEAL-O-RING
47.	6V-8635 C	[1]	CONNECTOR
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270567

145-4673: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4BS502-558
PART OF 112-6949 CHASSIS AR

i01197204 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[1]	CAP-DUST
2.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
3.	6W-5458	[2]	SPACER (0.406X0.75X0.5-IN THK)
4.	8C-6712	[1]	ELBOW
5.	8T-0083	[1]	TEE-UNION
6.	134-3016 Y	[1]	FILTER GP-OIL (HYDRAULIC)
7.	163-0573 I	[1]	HOSE AS
8.	146-3198 I	[1]	HOSE AS
9.	146-3199 I	[1]	HOSE AS
10.	146-3200 I	[1]	HOSE AS
11.	8R-2477 I	[1]	HOSE AS
12.	146-3202 I	[1]	HOSE AS
13.	146-3204	[1]	BRACKET
14.	150-8380	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	150-8381	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	1S-0994	[9]	CLIP (LOOP)
17.	3D-2824	[5]	SEAL-O-RING
18.	3J-1907	[2]	SEAL-O-RING
19.	3J-7354	[2]	SEAL-O-RING
20.	5G-7020	[1]	CLIP (SLOT)
21.	5G-7021	[1]	CLIP (TAB)
22.	5K-9090	[2]	SEAL-O-RING
23.	5P-7468	[1]	CLIP (SLOT)
24.	5P-7469	[1]	CLIP (TAB)
25.	5P-7854	[6]	CLIP
26.	5P-8444	[1]	GROMMET (37-MM ID)
27.	6V-1889	[17]	CLIP (LOOP)
28.	6V-8398	[2]	SEAL-O-RING
29.	6V-8637	[2]	CONNECTOR
30.	6V-8625	[1]	ELBOW
31.	6V-9007	[3]	ELBOW
32.	6V-9746	[11]	SEAL-O-RING
33.	6V-9853	[1]	ELBOW
34.	7D-7233 C	[3]	CLIP (LOOP)
35.	7M-8485	[1]	SEAL-O-RING
36.	8D-9671	[2]	CLIP
37.	8T-2353	[1]	ADAPTER
38.	8T-4121 C	[31]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[11]	NUT (M10X1.5-THD)
40.	8T-4136 CM	[18]	BOLT (M10X1.5X25-MM)
41.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
42.	8T-4184 M	[1]	BOLT (M12X1.75X45-MM)
43.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4244 M	[1]	NUT (M12X1.75-THD)
45.	8T-8899	[1]	ELBOW
46.	3K-0360	[1]	SEAL-O-RING
47.	6V-8635	[1]	CONNECTOR
48.	7K-1181	[1]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270568

145-4673: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4BS559-UP
PART OF 112-6949 CHASSIS AR

i01444646 SEBP2527

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[1]	CAP-DUST
2.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
3.	6W-5458	[2]	SPACER (0.406X0.75X0.5-IN THK)
4.	8C-6712	[1]	ELBOW
5.	8T-0083	[1]	TEE-UNION
6.	134-3016 Y	[1]	FILTER GP-OIL (HYDRAULIC)
7.	163-0573 I	[1]	HOSE AS
8.	146-3198 I	[1]	HOSE AS
9.	146-3199 I	[1]	HOSE AS
10.	146-3200 I	[1]	HOSE AS
11.	8R-2477 I	[1]	HOSE AS
12.	146-3202 I	[1]	HOSE AS
13.	146-3204	[1]	BRACKET
14.	150-8380	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	150-8381	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
16.	1S-0994	[9]	CLIP (LOOP)
17.	3D-2824	[5]	SEAL-O-RING
18.	3J-1907	[2]	SEAL-O-RING
19.	3J-7354	[1]	SEAL-O-RING
20.	5G-7020	[1]	CLIP (SLOT)
21.	5G-7021	[1]	CLIP (TAB)
22.	5K-9090	[2]	SEAL-O-RING
23.	5P-7468	[1]	CLIP (SLOT)
24.	5P-7469	[1]	CLIP (TAB)
25.	5P-7854	[6]	CLIP
26.	5P-8444	[1]	GROMMET (37-MM ID)
27.	6V-1889	[17]	CLIP (LOOP)
28.	6V-8398	[2]	SEAL-O-RING
29.	6V-8637	[2]	CONNECTOR
31.	6V-9007	[3]	ELBOW
32.	6V-9746	[11]	SEAL-O-RING
33.	6V-9853	[1]	ELBOW
34.	7D-7233 C	[3]	CLIP (LOOP)
35.	7M-8485	[1]	SEAL-O-RING
36.	8D-9671	[2]	CLIP
37.	8T-2353	[1]	ADAPTER
38.	8T-4121 C	[31]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 M	[11]	NUT (M10X1.5-THD)
40.	8T-4136 CM	[18]	BOLT (M10X1.5X25-MM)
41.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
42.	8T-4184 M	[1]	BOLT (M12X1.75X45-MM)
43.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4244 M	[1]	NUT (M12X1.75-THD)
45.	8T-8899	[1]	ELBOW
47.	6V-8635	[1]	CONNECTOR
48.	7K-1181	[1]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25270569

112-6991: LINES GP-LIFT CYLINDER

LINES GP-LIFT CYLINDER

112-6991 LINES GP-LIFT CYLINDER
S/N 4BS1-UP
PART OF 112-6985 HYDRAULIC AR-2 VALVE

i00492893 SEBP2527

1126991 LINES GP-LIFT CYLINDER Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-3703	[4]	SEAL-RECTANGULAR
2.	125-2804	[1]	ELBOW
3.	125-2805	[1]	ELBOW
4.	125-2806	[1]	TUBE AS
	6V-0421	[1]	PLUG
	7K-7745	[1]	CLAMP
5.	125-2807	[1]	TUBE AS
	6V-0421	[1]	PLUG
	7K-7745	[1]	CLAMP
6.	125-2809 I	[2]	HOSE AS
7.	125-2811 I	[2]	HOSE AS
8.	4J-5267	[4]	SEAL-O-RING
9.	6V-8716	[4]	CONNECTOR (STRAIGHT)
10.	6V-9746	[4]	SEAL-O-RING
11.	7G-3832	[2]	GROMMET
12.	7G-3833	[2]	CLIP (TAB)
13.	7G-3834	[2]	CLIP (SLOT)
14.	7M-8485	[4]	SEAL-O-RING
15.	8C-3205	[8]	FLANGE-HALF
16.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
18.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
19.	8T-4196 M	[16]	BOLT (M10X1.5X35-MM)
20.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
21.	8T-6466 M	[16]	BOLT (M10X1.5X60-MM)
22.	7X-7729	[2]	WASHER (11X25X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART