204-6379 WIRING GP-CAB -QUICK COUPLER S/N 3BS1-99999 PART OF 188-1396 HYDRAULIC AR-COUPLER, 188-0098 HYDRAULIC AR-HIGH LIFT 962G

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 204-6379 WIRING GP-
1. 156-1105 WIRING GP-
2. 156-1105 WIRING GP-
3. 112-6981 WIRING GP-
4. 153-4848 WIRING GP-
5. 148-5662 WIRING GP-
6. 145-9301 WIRING GP-
7. 162-7354 WIRING GP-
8. 162-7354 WIRING GP-
9. 144-2276 WIRING GP-
0. INFORMATION

WHEEL LOADER 962G WHEEL LOADER 3BS
962G Wheel Loader 3BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2530 962G 3BS (1997)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

154-8768 WIRING GP-CAB

183-9509 WIRING GP-CAB

204-6379 WIRING GP-CAB

156-1105 WIRING GP-ELECTRIC CLUTCH

112-6981 WIRING GP-ENGINE

#SEBP25300300

204-6379: WIRING GP-CAB

WIRING GP-CAB

204-6379 WIRING GP-CAB -QUICK COUPLER
S/N 3BS1-99999
PART OF 188-1396 HYDRAULIC AR-COUPLER, 188-0098 HYDRAULIC AR-HIGH LIFT

i01502006 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	065-7187	[1]	TERMINAL
2.	132-1829 Y	[1]	ALARM GP (24-VOLT)(ACTION)
3.	204-3936	[1]	HARNESS AS-CAB (QUICK COUPLER)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
4.	219-9541	[1]	SWITCH AS-ROCKER (LED)(QUICK COUPLER)
	Y		SEPARATE ILLUSTRATION

#SEBP25300301

156-1105: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

156-1105 WIRING GP-ELECTRIC CLUTCH
S/N 3BS1-432
AXLE OIL
PART OF 151-6291 COOLER & MTG AR-AXLE OIL

i00820934 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-0299 M	[2]	BOLT (M16X2X30-MM)
8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
156-5892	[1]	BRACKET
6V-1889	[1]	CLIP (LOOP)
6V-3265	[3]	CLIP
8M-2773	[1]	CLIP (LOOP)
9M-8406	[3]	CLIP (LOOP)
130-5300	[2]	CLIP
156-1107	[1]	HARNESS AS-AXLE (REAR AXLE OIL TEMPERATURE)
156-1108	[1]	HARNESS AS (AXLE OIL COOLER TEMPERATURE)
157-7317	[1]	HARNESS AS (AXLE OIL COOLER PUMP CLUTCH)
8T-4133 M	[3]	NUT (M10X1.5-THD)
6W-5458	[1]	SPACER (0.406X0.75X0.5-IN THK)
3S-2093	[5]	STRAP-CABLE
155-8998	[1]	SWITCH AS-TEMPERATURE (AXLE OIL COOLER)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
5P-8247	[2]	WASHER-HARD (17X32X3.5-MM THK)
9U-1420	[1]	WIRE AS
M		METRIC PART

#SEBP25300302

156-1105: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

156-1105 WIRING GP-ELECTRIC CLUTCH
S/N 3BS433-99999
AXLE OIL
PART OF 151-6291 COOLER & MTG AR-AXLE OIL

i01066866 SEBP2530

1561105 WIRING GP-ELECTRIC CLUTCH Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[3]	STRAP-CABLE
2.	6W-5458	[1]	SPACER (0.406X0.75X0.5-IN THK)
3.	155-8998	[1]	SWITCH AS-TEMPERATURE (AXLE OIL COOLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	156-1108	[1]	HARNESS AS (AXLE OIL COOLER TEMPERATURE)
5.	157-7317	[1]	HARNESS AS (AXLE OIL COOLER PUMP CLUTCH)
6.	6V-1889	[1]	CLIP (LOOP)
7.	6V-3265	[3]	CLIP
8.	8T-4121 C	[5]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4133 M	[2]	NUT (M10X1.5-THD)
10.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
11.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP25300303

112-6981: WIRING GP-ENGINE

WIRING GP-ENGINE

112-6981 WIRING GP-ENGINE
S/N 3BS1-99999
PART OF 148-5659 ELECTRICAL AR

i00695466 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
2.	130-5300	[4]	CLIP
3.	3S-2093	[4]	STRAP-CABLE
4.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
5.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
6.	9M-8406	[8]	CLIP (LOOP)
7.	147-1224	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
8.	6V-2455	[1]	SENSOR GP-SPEED (ENGINE)
9.	8M-2772	[2]	CLIP (LOOP)
10.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER OIL)
11.	3J-1907	[3]	SEAL-O-RING
12.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
13.	8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
14.	118-6878	[1]	BRACKET AS
15.	3E-6455	[1]	SWITCH AS-PRESSURE (ENGINE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
16.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
17.	8T-4133 M	[2]	NUT (M10X1.5-THD)
18.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
19.	3V-0778	[1]	BRACKET
20.	9X-3495	[1]	CLIP AS
21.	8M-2769	[1]	CLIP
22.	1S-0994	[1]	CLIP (LOOP)
23.	131-0427 Y	[1]	SENSOR GP-TEMPERATURE (ENGINE COOLANT)
24.	5K-3294	[1]	CLIP
25.	6D-4246	[1]	CLIP (LOOP)
26.	4E-2843	[1]	PLATE AS
27.	116-4491	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
28.	130-9927	[1]	STRIP AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
29.	8T-4190 M	[1]	BOLT (M16X2X25-MM)
30.	7X-7729	[1]	WASHER (11X25X3-MM THK)
31.	4D-7794	[2]	CLIP
32.	9U-2277	[1]	CLIP AS
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300304

153-4848: WIRING GP-ENGINE

WIRING GP-ENGINE

153-4848 WIRING GP-ENGINE
S/N 3BS1-UP
PART OF 157-2110, 157-2113, 178-8847 CONVERSION AR-MACHINE

i00778567 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
8T-4190 M	[1]	BOLT (M16X2X25-MM)
3V-0778	[1]	BRACKET
118-6878	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
116-4491	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
130-5300	[4]	CLIP
9M-8406	[8]	CLIP (LOOP)
8M-2772	[1]	CLIP (LOOP)
033-8248	[2]	CLIP (LOOP)
8M-2769	[1]	CLIP
1S-0994	[1]	CLIP (LOOP)
2P-0449	[1]	CLIP
6D-4246	[1]	CLIP (LOOP)
4D-7794	[2]	CLIP
9X-3495	[1]	CLIP AS
9U-2277	[1]	CLIP AS
153-4833	[1]	HARNESS AS
8T-4133 M	[2]	NUT (M10X1.5-THD)
4E-2843	[1]	PLATE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3J-1907	[3]	SEAL-O-RING
4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER OIL)
6V-2455	[1]	SENSOR GP-SPEED (ENGINE)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9X-1386 BE		SLEEVE
131-0427 Y	[1]	SENSOR GP-TEMPERATURE (ENGINE COOLANT)
3S-2093	[6]	STRAP-CABLE
130-9927	[1]	STRIP AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3E-6455	[1]	SWITCH AS-PRESSURE (ENGINE OIL)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
7X-7729	[1]	WASHER (11X25X3-MM THK)
8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
4P-5787	[1]	WIRE AS
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP25300305

148-5662: WIRING GP-FRONT

WIRING GP-FRONT

148-5662 WIRING GP-FRONT
S/N 3BS1-99999
PART OF 148-5659 ELECTRICAL AR

i00770136 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	5V-6152	[2]	CLAMP
3.	5V-6153	[1]	PLATE-COVER
4.	7K-1181	[2]	STRAP-CABLE
5.	7T-0970	[2]	HORN AS (24-VOLT, HIGH TONE)
			(EACH INCLUDES)
	8C-7581 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
	9B-7233	[2]	LOCKWASHER
6.	130-5300	[7]	CLIP
7.	141-3882	[1]	HARNESS AS-FRONT
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	8T-8737	[31]	PLUG-SEAL
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
8.	4D-7794	[3]	CLIP
9.	4K-8864	[5]	CLIP (LOOP)
10.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	5P-7464	[1]	CLIP (SLOT)
12.	5P-7465	[1]	CLIP (TAB)
13.	8M-2773	[6]	CLIP (LOOP)
14.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[11]	NUT (M10X1.5-THD)
16.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
17.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)
18.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
19.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
20.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
21.	9M-8406	[1]	CLIP (LOOP)
22.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
23.	141-3883	[1]	HARNESS AS
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	8T-8737	[5]	PLUG-SEAL
24.	141-3884	[1]	HARNESS AS
	8T-8737	[5]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	M		METRIC PART

#SEBP25300306

145-9301: WIRING GP-MACHINE

WIRING GP-MACHINE

145-9301 WIRING GP-MACHINE
S/N 3BS1-99999
PART OF 148-5659 ELECTRICAL AR

i00775034 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
2.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	3S-2093	[30]	STRAP-CABLE
4.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)
	4B-2049	[1]	NUT (10-32-THD)
	8F-1434	[1]	LOCKWASHER
	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
5.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	130-5300	[8]	CLIP
7.	136-3937	[1]	SHEET
8.	136-4129	[1]	BRACKET
9.	144-2276 Y	[1]	WIRING GP-RELAY PANEL
10.	145-9302	[1]	HARNESS AS-CHASSIS (TILT)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	3T-3043	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
11.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
13.	146-9542	[1]	HARNESS AS-HYDRAULIC TANK (OIL LEVEL SW. OIL TEMP SENSOR)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
	8T-8737	[5]	PLUG-SEAL
14.	1S-0994	[6]	CLIP (LOOP)
15.	2M-3433	[2]	GROMMET
16.	2M-9780	[1]	SEAL-O-RING
17.	3J-1907	[3]	SEAL-O-RING
18.	4D-7388	[2]	CLIP (LOOP)
19.	4S-1962	[6]	CLIP (LOOP)
20.	8C-8533	[1]	CLIP
21.	5C-8312 M	[4]	NUT (M4X0.7-THD)
22.	5P-7854	[1]	CLIP
23.	5P-9297	[7]	CLIP (LOOP)
24.	5P-9299	[1]	CLIP (LOOP)
25.	6D-4246	[1]	CLIP (LOOP)
26.	6V-1889	[2]	CLIP (LOOP)
27.	7D-7233	[1]	CLIP (LOOP)
28.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
29.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4133 M	[9]	NUT (M10X1.5-THD)
31.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[25]	BOLT (M10X1.5X20-MM)
33.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
34.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[2]	NUT (M12X1.75-THD)
36.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
37.	9M-8406	[4]	CLIP (LOOP)
38.	130-5301	[1]	CLIP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300307

162-7354: WIRING GP-MACHINE

WIRING GP-MACHINE

162-7354 WIRING GP-MACHINE
S/N 3BS1-647
PART OF 157-2110, 157-2113, 178-8847 CONVERSION AR-MACHINE

i00981025 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
2.	3E-7693	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	3S-2093	[30]	STRAP-CABLE
4.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)
	4B-2049	[1]	NUT (10-32-THD)
	8F-1434	[1]	LOCKWASHER
	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
5.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	130-5300	[7]	CLIP
7.	136-3937	[1]	SHEET
8.	136-4129	[1]	BRACKET
9.	163-1035 Y	[1]	WIRING GP-RELAY PANEL
10.	145-9302	[1]	HARNESS AS-CHASSIS
11.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	146-5037	[1]	PLATE-INSTRUCTION
13.	146-9542	[1]	HARNESS AS-HYDRAULIC TANK (OIL LEVEL SW. OIL TEMP SENSOR)
14.	1S-0994	[6]	CLIP (LOOP)
15.	2M-3433	[2]	GROMMET
16.	2M-9780	[1]	SEAL-O-RING
17.	3J-1907	[3]	SEAL-O-RING
18.	4D-7388	[1]	CLIP (LOOP)
19.	4S-1962	[6]	CLIP (LOOP)
20.	4S-4455	[1]	CLIP
21.	5C-8312 M	[4]	NUT (M4X0.7-THD)
22.	5P-7854	[1]	CLIP
23.	5P-9297	[7]	CLIP (LOOP)
24.	5P-9299	[2]	CLIP (LOOP)
25.	6D-4246	[1]	CLIP (LOOP)
26.	6V-1889	[2]	CLIP (LOOP)
27.	7D-7233	[1]	CLIP (LOOP)
28.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
29.	8T-4121	[36]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4133 M	[9]	NUT (M10X1.5-THD)
31.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[24]	BOLT (M10X1.5X20-MM)
33.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
34.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[1]	NUT (M12X1.75-THD)
36.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
37.	9M-8406	[2]	CLIP (LOOP)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300308

162-7354: WIRING GP-MACHINE

WIRING GP-MACHINE

162-7354 WIRING GP-MACHINE
S/N 3BS1-UP
PART OF 157-2110, 157-2113, 178-8847 CONVERSION AR-MACHINE

i01269969 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
2.	175-3244 C	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	3S-2093	[30]	STRAP-CABLE
4.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)
	4B-2049	[1]	NUT (10-32-THD)
	8F-1434	[1]	LOCKWASHER
	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
5.	123-2993	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	130-5300	[8]	CLIP
7.	136-3937	[1]	SHEET
8.	136-4129	[1]	BRACKET
9.	163-1035 Y	[1]	WIRING GP-RELAY PANEL
10.	145-9302	[1]	HARNESS AS-CHASSIS
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	3T-3043	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
11.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS WEDGE)
12.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
13.	146-9542	[1]	HARNESS AS-HYDRAULIC TANK (OIL LEVEL SW. OIL TEMP SENSOR)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	8T-8737		PLUG-SEAL
14.	1S-0994	[6]	CLIP (LOOP)
15.	2M-3433	[2]	GROMMET
16.	2M-9780	[1]	SEAL-O-RING
17.	3J-1907	[3]	SEAL-O-RING
18.	4D-7388	[1]	CLIP (LOOP)
19.	4S-1962	[6]	CLIP (LOOP)
20.	4S-4455	[1]	CLIP
21.	5C-8312 M	[4]	NUT (M4X0.7-THD)
22.	5P-7854	[1]	CLIP
23.	5P-9297	[7]	CLIP (LOOP)
24.	5P-9299	[2]	CLIP (LOOP)
25.	6D-4246	[1]	CLIP (LOOP)
26.	6V-1889	[2]	CLIP (LOOP)
27.	7D-7233	[1]	CLIP (LOOP)
28.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
29.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4133 M	[9]	NUT (M10X1.5-THD)
31.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[24]	BOLT (M10X1.5X20-MM)
33.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
34.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[1]	NUT (M12X1.75-THD)
36.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
37.	9M-8406	[2]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300309

144-2276: WIRING GP-RELAY PANEL

WIRING GP-RELAY PANEL

144-2276 WIRING GP-RELAY PANEL
S/N 3BS1-99999
PART OF 145-9301 WIRING GP-MACHINE

i00748689 SEBP2530

1442276 WIRING GP-RELAY PANEL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0075 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)
2.	9S-4693	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	3K-8782	[4]	FUSE (10-AMPERE)
4.	3S-2093	[7]	STRAP-CABLE
5.	4B-2049	[2]	NUT (10-32-THD)
6.	4K-5122	[4]	HOLDER AS-FUSE
			(EACH INCLUDES)
	139-0178	[1]	CAP
7.	7V-9275	[1]	STRAP
8.	8T-6411 M	[7]	SCREW-MACHINE (M6X1X12-MM)
9.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
10.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
11.	121-1023	[1]	BLOCK-TERMINAL
12.	125-1302	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
13.	130-5300	[1]	CLIP
14.	130-7068	[1]	PLATE-INSTRUCTION
15.	130-7070	[1]	PLATE-INSTRUCTION
16.	144-2256	[1]	BOX AS
	6V-9632 M	[9]	NUT-WELD (M6X1-THD)
	7T-1099	[3]	LINK
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	8T-4935 M	[1]	BOSS-WELD (M10X1.5X45-MM)
	9R-2821 M	[4]	BOSS (M10X1.5X15-MM)
17.	144-2257	[1]	PLATE
18.	147-2079	[1]	HARNESS AS-BOX (RELAY)
19.	147-2080	[1]	HARNESS AS-BOX (FUSES, LIGHTS, HOOD, BREAKERS)
20.	147-2083	[1]	CABLE AS (ALTERNATOR)
21.	166-3423	[1]	CABLE AS (AIR INLET HEATER RELAY)
22.	147-2085	[1]	CABLE AS (ALTERNATOR)
23.	147-2086	[1]	CABLE AS (MAIN POWER RELAY)
24.	147-2087	[1]	WIRE AS (START RELAY)
25.	166-2834	[1]	CABLE AS (AIR INLET HEATER RELAY)
26.	147-2089	[1]	CABLE AS (MAIN POWER RELAY)
27.	147-2090	[1]	WIRE AS
28.	149-2612	[1]	RELAY AS (24-VOLT)(HOOD)
29.	4B-4274	[6]	WASHER (5.5X13X1.2-MM THK)
30.	5C-2890 M	[2]	NUT (M6X1-THD)
31.	5C-9553 M	[11]	BOLT (M6X1X16-MM)
32.	5L-4507	[6]	SCREW-MACHINE (10-32X0.875-IN)
33.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
35.	8T-4205	[13]	WASHER-HARD (7.2X14.5X2-MM THK)
36.	9X-8256	[7]	WASHER (6.6X12X2-MM THK)
37.	9S-4693	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
38.	9H-1958	[1]	CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
39.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
40.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
41.	184-7435	[1]	PLATE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders

Fuses - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders

Circuit Breakers - Reset
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders

Battery or Battery Cable - Inspect/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Electrical Problems And Malfunctions
Electrical Problems And Malfunctions

Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off

The Harness 118-2943 May Be Installed Incorrectly
The Harness 118-2943 May Be Installed Incorrectly

Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders
Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Pressure Switch (Service Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System

Temperature Sender (Torque Converter Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System

Relay (Secondary Steering Motor)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System

Pressure Switch (Parking Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System

Toggle Switch (Hood Tilt)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System

Temperature Switch (Axle Oil Cooler)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Temperature Switch (Front and Rear Axle Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Temperature Sender (Hydraulic Oil)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System

Liquid Level Switch (Hydraulic Tank)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock

Service Letter-Asia

Systems Operation

Senders
Caterpillar Monitoring System

Switches
Caterpillar Monitoring System

Sensors
Caterpillar Monitoring System

Action Lamp
Caterpillar Monitoring System

Action Alarm
Caterpillar Monitoring System

Options Code Plug
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System

Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System

CAT Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Sensors
Payload Control System (PCS) 2.X

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock

Testing and Adjusting

Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

System Schematic
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Electrical Components And Connector Locations
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0041 FMI 03 Sensor Power Supply Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0041 FMI 04 Sensor Power Supply Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Electrical Connector - Inspect
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0070 FMI 03 Pressure Switch (Parking Brake Oil) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0070 FMI 04 Pressure Switch (Parking Brake Oil) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0190 FMI 02 Speed Sensor (Engine) Signal Incorrect - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0270 FMI 12 Caterpillar Monitoring System Harness Code Failed - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0444 FMI 06 Magnetic Switch (Start Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0562 FMI 09 Caterpillar Monitoring System Abnormal Update - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0617 FMI 03 Magnetic Switch (Air Inlet Heater Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0617 FMI 05 Magnetic Switch (Air Inlet Heater Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0617 FMI 06 Magnetic Switch (Air Inlet Heater Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0793 FMI 03 Pressure Switch (Primary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0793 FMI 04 Pressure Switch (Primary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0794 FMI 03 Pressure Switch (Secondary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0794 FMI 04 Pressure Switch (Secondary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0248 FMI 12 CAT Data Link Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0270 FMI 02 Caterpillar Monitoring System Harness Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0296 FMI 09 Power Train Electronic Control Module Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0296 FMI 11 Power Train Electronic Control Module Failure Mode Not Identifiable - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0359 FMI 03 Detent Coil (Lift Lever Raise) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0360 FMI 03 Detent Coil (Lift Lever Lower) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0361 FMI 03 Detent Coil (Tilt Lever Tilt Back) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0359 FMI 05 Detent Coil (Lift Lever Raise) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0360 FMI 05 Detent Coil (Lift Lever Lower) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0361 FMI 05 Detent Coil (Tilt Lever Tilt Back) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0359 FMI 06 Detent Coil (Lift Lever Raise) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0360 FMI 06 Detent Coil (Lift Lever Lower) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0361 FMI 06 Detent Coil (Tilt Lever Tilt Back) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

CID 0687 FMI 02 Options Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

Electrical Connector - Inspect
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Electrical Connector - Inspect
Caterpillar Monitoring System

Electric Starting System - Test
3114, 3116, and 3126 Engines

Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X

Wiring Harness (Short Circuit) - Test
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

System Schematic
Machine Security System

Wiring Harness (Open Circuit) - Test
Product Link 151/201

Electrical Connector - Inspect
Product Link 151/201

Wiring Harness (Open Circuit) - Test
Caterpillar Monitoring System

Wiring Harness (Short Circuit) - Test
Product Link 151/201

Wiring Harness (Short Circuit) - Test
Product Link - PL102C

Wiring Harness (Open Circuit) - Test
Product Link - PL102C

Electrical Connector - Inspect
Product Link - PL102C

Electrical Connector - Inspect
Work Area Visual System

Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X

Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X

Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X

Glossary of Electrical Terms
Payload Control System (PCS) 2.X

System Schematic
Payload Control System (PCS) 2.X

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System

Electrical Component and Connector Locations
Caterpillar Monitoring System

Switch Circuits
Caterpillar Monitoring System

MID 122 - CID 0269 - FMI 03
Product Link 151/201

MID 122 - CID 0269 - FMI 04
Product Link 151/201

Electrical Component and Connector Locations
Machine Security System

Connector Locations
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Electrical Component and Connector Locations
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

New Position Sensor For Payload Control System And Implement Control System Features Improved Sealing {1408}
1999/04/19

Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06

Field Returns of 4W-9972 Temperature Senders Are Necessary for Failure Analysis {1906}
2000/11/13

Improved Transmission Direction Switch Now Used {7332}
2003/10/13

Improved Pressure Switch Now Used {1435}
2003/07/28

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 962G :

183-9509 WIRING GP-CAB

154-8768 WIRING GP-CAB

156-1104 WIRING GP-AXLE TEMPERATURE

165-7066 WARNING GP-BACKUP

112-6979 WARNING GP-BACKUP

156-1105 WIRING GP-ELECTRIC CLUTCH

112-6981 WIRING GP-ENGINE

153-4848 WIRING GP-ENGINE

148-5662 WIRING GP-FRONT

145-9301 WIRING GP-MACHINE

162-7354 WIRING GP-MACHINE

Truck sale:

Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI

59.000

Caterpillar 962G, Wielladers, Bouw

QUINN COMPANY

Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI

96.768

Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA