AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

171-2317 HYDRAULIC AR-BIODEGRADABLE OIL S/N 3BS1-731 962G WHEEL LOADER


HYDRAULIC SYSTEM
HYDRAULIC GP
KICKOUT & POSITIONER GP
LINES GP-COUPLER
CYLINDER GP

WHEEL LOADER 962G WHEEL LOADER 3BS
 962G Wheel Loader 3BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2530 962G 3BS   (1997)

HYDRAULIC SYSTEM

HYDRAULIC GP
164-6500 CONVERSION AR-RIDE CONTROL
164-6501 CONVERSION AR-RIDE CONTROL
121-3080 HYDRAULIC AR-2 VALVE
143-5030 HYDRAULIC AR-3 VALVE
HYDRAULIC AR-BIODEGRADABLE OIL
171-2317 HYDRAULIC AR-BIODEGRADABLE OIL
HYDRAULIC AR-BIODEGRADABLE OIL
171-2317 HYDRAULIC AR-BIODEGRADABLE OIL
188-1396 HYDRAULIC AR-COUPLER
188-0098 HYDRAULIC AR-HIGH LIFT
 

#SEBP25300510
 

171-2317: HYDRAULIC AR-BIODEGRADABLE OIL

171-2317 HYDRAULIC AR-BIODEGRADABLE OIL
S/N 3BS1-731
i01070703 SEBP2530
1712317 HYDRAULIC AR-BIODEGRADABLE OIL Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-0778 [1] BRACKET  
2. 5P-4428 [2] ELBOW-AIR BRAKE  
3. 6V-2610 [1] FITTING  
4. 9W-8765 [1] PLATE  
5. 131-7251 I [1] HOSE AS  
6. 141-6968 [1] FILM-IDENTIFICATION (BIODEGRADABLE HYDRAULIC OIL)  
7. 150-7299 I [1] HOSE AS  
8. [1] SUPPORT  
9. 157-3861 Y [1] FILTER GP-OIL (BIODEGRADABLE HYDRAULIC)  
10. [1] TUBE AS  
11. [1] FLAP  
12. 3J-1907 [1] SEAL-O-RING  
13. 3K-0360 [2] SEAL-O-RING  
14. 3S-8664 [2] CLIP (LOOP)  
15. 5C-7261 M [1] NUT (M8X1.25-THD)  
16. 6D-4247 [2] CLIP  
17. 6V-8397 [1] SEAL-O-RING  
18. 6V-8398 [7] SEAL-O-RING  
19. 6V-8721 [2] ELBOW  
20. 6V-8782 [1] TEE  
21. 6V-8936 [2] REDUCER  
22. 6V-9844 [1] TEE-SWIVEL  
23. 6V-9851 [1] ELBOW  
24. 6V-9873 [1] CONNECTOR  
25. 7X-2621 M [4] BOLT (M10X1.5X12-MM)  
26. 8C-8989 [1] ELBOW  
27. 8F-6324 [1] GROMMET  
28. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 M [4] NUT (M10X1.5-THD)  
30. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
33. 5P-6011 BD TUBE  
    (FILTER TO PRESSURE GAUGE)
34. 3J-7354 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300511
 

171-2317: HYDRAULIC AR-BIODEGRADABLE OIL

171-2317 HYDRAULIC AR-BIODEGRADABLE OIL
S/N 3BS732-99999
i01506258 SEBP2530
1712317 HYDRAULIC AR-BIODEGRADABLE OIL Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-0778 [1] BRACKET  
2. 5P-4428 [2] ELBOW-AIR BRAKE  
3. 6V-2610 [1] FITTING  
4. 9W-8765 [1] PLATE  
5. 131-7251 I [1] HOSE AS  
6. 141-6968 [1] FILM-IDENTIFICATION (BIODEGRADABLE HYDRAULIC OIL)  
7. 150-7299 I [1] HOSE AS  
8. [1] SUPPORT  
9. 157-3861 Y [1] FILTER GP-OIL (BIODEGRADABLE HYDRAULIC)  
10. [1] TUBE AS  
11. [1] FLAP  
12. 3J-1907 [1] SEAL-O-RING  
13. 3K-0360 [2] SEAL-O-RING  
14. 3S-8664 [2] CLIP (LOOP)  
15. 5C-7261 M [1] NUT (M8X1.25-THD)  
16. 6D-4247 [2] CLIP  
17. 6V-8397 [1] SEAL-O-RING  
18. 6V-8398 [7] SEAL-O-RING  
19. 6V-8721 [2] ELBOW  
20. 6V-8782 [1] TEE  
21. 6V-8936 [2] REDUCER  
22. 6V-9844 [1] TEE-SWIVEL  
23. 6V-9851 [1] ELBOW  
24. 6V-9873 [1] CONNECTOR  
25. 7X-2621 M [4] BOLT (M10X1.5X12-MM)  
26. 8C-8989 [1] ELBOW  
27. 8F-6324 [1] GROMMET  
28. 8T-4121 C [15] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 CM [5] NUT (M10X1.5-THD)  
30. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
33. 5P-6011 BD TUBE  
    (FILTER TO PRESSURE GAUGE)
34. 3J-7354 [1] SEAL-O-RING  
35. 3D-2824 C [1] SEAL-O-RING  
36. 6V-8637 C [1] CONNECTOR  
37. 6V-9746 C [1] SEAL-O-RING  
38. 6Y-4053 CI [1] HOSE AS  
39. 9M-4972 C [1] CLIP (LOOP)  
40. 067-2551 C [1] CLIP  
41. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300512
 

188-1396: HYDRAULIC AR-COUPLER

188-1396 HYDRAULIC AR-COUPLER
S/N 3BS1-UP
CANNOT BE USED WITH HIGH LIFT CONFIGURATION
i01502378 SEBP2530
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  186-9965 [1] BLOCK GP  
  188-1850 [1] BLOCK GP-COUPLER  
  188-1849 Y [1] LINES GP-COUPLER  
  183-9509 Y [1] WIRING GP-CAB (QUICK COUPLER)  
    -OR-
  204-6379 Y [1] WIRING GP-CAB (QUICK COUPLER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300513
 

188-0098: HYDRAULIC AR-HIGH LIFT

188-0098 HYDRAULIC AR-HIGH LIFT
S/N 3BS1-UP
CANNOT BE USED WITH 185-6164 HYDRAULIC AR, 188-1396 HYDRAULIC AR
i01502373 SEBP2530
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  186-9965 [1] BLOCK GP  
  188-0168 [1] BLOCK GP  
  188-0099 Y [1] LINES GP-COUPLER (HIGH LIFT MACHINES)  
  183-9509 Y [1] WIRING GP-CAB (QUICK COUPLER)  
    -OR-
  204-6379 Y [1] WIRING GP-CAB (QUICK COUPLER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300514
 

112-6989: KICKOUT & POSITIONER GP

112-6989 KICKOUT & POSITIONER GP
S/N 3BS1-217
PART OF 121-3080 HYDRAULIC AR-2 VALVE
i00693185 SEBP2530
1126989 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 117-1324 [1] CONTROL GP-POSITION (TILT)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
17. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
18. 124-4592 [1] ROD END  
19. 130-8609 [1] HARNESS AS  
20. 163-0094 [1] ARM-BAIL  
21. 131-3246 [1] COVER AS  
22. 131-3253 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300515
 

135-7215: KICKOUT & POSITIONER GP

135-7215 KICKOUT & POSITIONER GP
S/N 3BS1-432
PART OF 148-5659 ELECTRICAL AR
i00729731 SEBP2530
1357215 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 117-1324 [1] CONTROL GP-POSITION (TILT)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
17. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
18. 124-4592 [1] ROD END  
19. 130-8609 [1] HARNESS AS  
20. 163-0094 [1] ARM-BAIL  
21. 155-5167 [1] COVER AS  
22. 4E-4894 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300516
 

135-7215: KICKOUT & POSITIONER GP

135-7215 KICKOUT & POSITIONER GP
S/N 3BS433-UP
PART OF 148-5659 ELECTRICAL AR
i01066920 SEBP2530
1357215 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 117-1324 [1] CONTROL GP-POSITION (TILT)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
  5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
  6T-4059 [1] GROMMET  
17. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
18. 124-4592 [1] ROD END  
19. 130-8609 [1] HARNESS AS  
20. 163-0094 [1] ARM-BAIL  
21. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
22. 4E-4894 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
24. 3T-3045 C [1] CLIP AS  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300517
 

135-7215: KICKOUT & POSITIONER GP

135-7215 KICKOUT & POSITIONER GP
S/N 3BS433-99999
PART OF 148-5659 ELECTRICAL AR
i01408592 SEBP2530
1357215 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING (LARGE)  
2. 2L-6726 [1] RING-RETAINING (SMALL)  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 4V-1939 [4] CLAMP  
7. 4V-4840 [1] MAGNET AS  
8. 5V-6439 [2] PLATE  
9. 6D-3025 [2] BALL BEARING  
10. 7I-3236 [1] SUPPORT AS  
11. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
12. 7X-7662 [1] ROD END  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
15. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
16. 164-3583 C [1] CONTROL GP-POSITION (TILT)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
  5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
  6T-4059 [1] GROMMET  
17. 161-8904 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
18. 124-4592 [1] ROD END  
19. 155-4186 C [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
20. 163-0094 [1] ARM-BAIL  
21. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
22. 4E-4894 [1] TUBE AS  
23. 131-3255 [1] BRACKET  
24. 3T-3045 [1] CLIP AS  
25. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 6V-8237 [2] WASHER (26X44X4-MM THK)  
32. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
33. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
34. 8C-8451 M [4] BOLT (M6X1X40-MM)  
35. 6V-8132 M [2] BOLT (M24X3X120-MM)  
36. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [3] NUT (M10X1.5-THD)  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9X-2480 M [3] BOLT (M6X1X45-MM)  
45. 125-0901 [1] ROD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25300518
 

201-8254: LINES GP-CONNECTING

201-8254 LINES GP-CONNECTING -COUPLER
S/N 3BS1-99999
i01480892 SEBP2530
2018254 LINES GP-CONNECTING Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-7889 I [2] HOSE AS  
2. 086-9286 [2] CLAMP  
3. 1A-9579 [1] BOLT (5/16-18X1.5-IN)  
4. 3V-0046 [1] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25300519
 

163-4754: LINES GP-COUPLER

163-4754 LINES GP-COUPLER
S/N 3BS1-UP
PART OF 163-4752 COUPLER AR-QUICK
i01163179 SEBP2530
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  168-5037 [1] CLAMP  
  168-2160 [2] CONNECTOR  
  164-5105 Y [1] LINES GP-COUPLER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 962G :

143-5030 HYDRAULIC AR-3 VALVE
121-3080 HYDRAULIC AR-2 VALVE
FILTER GP-OIL
4I-3741 FILTER GP-OIL
FILTER GP-OIL
157-3861 FILTER GP-OIL
FILTER GP-OIL
157-3861 FILTER GP-OIL
FILTER GP-OIL
134-3016 FILTER GP-OIL
CYLINDER GP-TILT
129-4447 CYLINDER GP-TILT
CYLINDER GP-TILT
129-4447 CYLINDER GP-TILT
HYDRAULIC AR-BIODEGRADABLE OIL
171-2317 HYDRAULIC AR-BIODEGRADABLE OIL
188-1396 HYDRAULIC AR-COUPLER
188-0098 HYDRAULIC AR-HIGH LIFT
KICKOUT & POSITIONER GP
112-6989 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
135-7215 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
135-7215 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
135-7215 KICKOUT & POSITIONER GP
LINES GP-CONNECTING
201-8254 LINES GP-CONNECTING

Truck sale:

Caterpillar 962G
 
Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Wielladers, Bouw
59.000 
Caterpillar 962G, Wielladers, Bouw

QUINN COMPANY
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
96.768 
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.