WORK TOOLS
BLADE GPGROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
BLADE GP
#SEBP25361430
256-5314: BLADE GP-UNIVERSAL
256-5314 BLADE GP-UNIVERSAL
S/N DK330000-UP; 9EM1-UP
WITH ROCK GUARD & WEAR PLATES
PART OF 245-3569, 385-2624 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
S/N DK330000-UP; 9EM1-UP
WITH ROCK GUARD & WEAR PLATES
PART OF 245-3569, 385-2624 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
For full view, you need register
#SEBP25361431
135-9374: EDGE GP-BIT & CUTTING
135-9374 EDGE GP-BIT & CUTTING
S/N DK430000-UP; D1E1-UP; D1F1-UP; 9EM1-UP; BHR1-99999
PART OF 151-1150, 385-2628 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N DK430000-UP; D1E1-UP; D1F1-UP; 9EM1-UP; BHR1-99999
PART OF 151-1150, 385-2628 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
#SEBP25361432
163-9465: EDGE GP-BIT & CUTTING
163-9465 EDGE GP-BIT & CUTTING
S/N 3MP1-UP
PART OF 163-9464 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N 3MP1-UP
PART OF 163-9464 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-3527 | [5] | BOLT-PLOW (1-8X4.5-IN) | |
| 2. | 2J-3507 | [33] | NUT-FULL (1-8-THD) | |
| 3. | 4T-6381 | [1] | EDGE-CUTTING | |
| 4. | 6Y-5540 | [2] | EDGE-CUTTING | |
| 5. | 8E-4193 | [1] | BIT-END (RH) | |
| 6. | 8E-4194 | [1] | BIT-END (LH) | |
| 7. | 151-2985 | [1] | EDGE-CUTTING | |
| 8. | 4J-9058 | [28] | BOLT-PLOW (1-8X3.25-IN) | |
| 9. | 5P-8250 | [33] | WASHER (28X49X5-MM THK) |
#SEBP25361433
4Z-9057: EDGE GP-BIT & CUTTING
4Z-9057 EDGE GP-BIT & CUTTING
S/N DK530000-UP; LAA1-UP; 9EM1-UP; DZR1-UP
LOW GROUND PRESSURE
PART OF 256-4889, 257-5547, 385-2626, 385-2627, 4Z-9207 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N DK530000-UP; LAA1-UP; 9EM1-UP; DZR1-UP
LOW GROUND PRESSURE
PART OF 256-4889, 257-5547, 385-2626, 385-2627, 4Z-9207 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361434
507-2813: EDGE GP-BIT & CUTTING
507-2813 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N 9EM1-UP
28-MM (1.2-IN) THICK. ABRASIVE RESISTANT MATERIAL
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N 9EM1-UP
28-MM (1.2-IN) THICK. ABRASIVE RESISTANT MATERIAL
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361435
507-2837: EDGE GP-BIT & CUTTING
507-2837 EDGE GP-BIT & CUTTING
S/N 9EM1-UP
28-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N 9EM1-UP
28-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361436
507-2838: EDGE GP-BIT & CUTTING
507-2838 EDGE GP-BIT & CUTTING
S/N 9EM1-UP
45-MM (1.8-IN) THICK. UTILITY
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N 9EM1-UP
45-MM (1.8-IN) THICK. UTILITY
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361437
507-2839: EDGE GP-BIT & CUTTING
507-2839 EDGE GP-BIT & CUTTING
S/N 9EM1-UP
HOT CUPPED. 28-MM (1.2-IN) THICK
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N 9EM1-UP
HOT CUPPED. 28-MM (1.2-IN) THICK
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361438
507-2840: EDGE GP-BIT & CUTTING
507-2840 EDGE GP-BIT & CUTTING
S/N 9EM1-UP
HOT CUPPED. 35-MM (1.4-IN) THICK
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N 9EM1-UP
HOT CUPPED. 35-MM (1.4-IN) THICK
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361439
507-2918: EDGE GP-BIT & CUTTING
507-2918 EDGE GP-BIT & CUTTING
S/N 9EM1-UP
28-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH ANGLE BLADES
FIELD INSTALLATION
S/N 9EM1-UP
28-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH ANGLE BLADES
FIELD INSTALLATION
For full view, you need register
Information:
WORK TOOLS
BLADE GP
Special Instruction
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
