AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-1837 CONTROL GP-HYDRAULIC HAND S/N 1WR1-8115 EXCAVATOR,CENTER PIVOT Type 1 AN ATTACHMENT 416C BACKHOE LOADER


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416C BACKHOE LOADER 1WR
 416C Backhoe Loader Center Pivot, Parallel Lift 1WR00001-08115 (MACHINE) POWERED BY 3054 Engine SEBP2549 416C 1WR   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
112-1834 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5004 CONTROL GP-HYDRAULIC HAND
 

#SEBP25490680
 

112-1837: CONTROL GP-HYDRAULIC HAND

112-1837 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
EXCAVATOR,CENTER PIVOT
Type 1
AN ATTACHMENT
i00200870 SEBP2549
1121837 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3392 [2] ROD END  
2. 8T-3984 [2] KNOB  
3. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [4] BALL JOINT  
5. 8T-4815 [8] ROD END  
6. 8T-6431 [2] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2806 [8] PIN  
11. 9R-2807 [12] CLIP (RETAINER)  
12. 9R-8087 [1] LEVER AS  
  9R-9973 [1] PLATE AS (LH)  
13. 9R-9709 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
14. 9R-9720 [2] BRACKET AS  
15. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
16. 5V-4410 [1] BUSHING  
17. 9R-9901 [8] FASTENER (CLIP)  
18. 9R-9969 [2] BEARING  
19. 9R-9972 [1] LEVER AS  
  9R-9975 [1] PLATE AS (RH)  
20. 006-8606 [1] RING-RETAINING  
21. 104-9483 [1] PLATE  
22. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
23. 117-1051 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
24. 117-1052 [1] SHAFT AS  
  117-1051 [1] PLATE AS  
25. 117-5672 [2] BOOT  
26. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
  9R-3067 [1] PIN  
  9R-3135 [1] PIN  
27. 5V-4410 [2] BUSHING  
28. 118-5264 [2] ROD AS  
29. 128-6150 [1] FILM-INSTRUCTION  
30. 136-7439 B [11] SPACER (20X40X3-MM THK)  
31. 136-7440 B [2] SHIM (1-MM THK)  
32. 8T-4133 M [10] NUT (M10X1.5-THD)  
33. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 9R-9722 [4] ROD  
39. 118-5263 [2] PLATE  
40. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490681
 

112-1837: CONTROL GP-HYDRAULIC HAND

112-1837 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
EXCAVATOR,CENTER PIVOT
Type 2
AN ATTACHMENT
i00675342 SEBP2549
1121837 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3392 [2] ROD END  
2. 8T-3984 [2] KNOB  
3. 8T-4121 C [22] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [4] BALL JOINT  
5. 8T-4815 [8] ROD END  
6. 8T-6431 [2] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-1968 C [6] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2806 [8] PIN  
11. 9R-2807 [12] CLIP (RETAINER)  
12. 9R-8087 [1] LEVER AS  
13. 9R-9709 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
14. 9R-9720 [2] BRACKET AS  
15. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
16. 5V-4410 [1] BUSHING  
17. 9R-9901 [8] FASTENER (CLIP)  
18. 9R-9969 [2] BEARING  
19. 9R-9972 [1] LEVER AS  
20. 006-8606 [3] RING-RETAINING  
21. 104-9483 [1] PLATE  
22. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
23. 117-1051 [1] PLATE AS  
24. 117-1052 [1] SHAFT AS  
25. 117-5672 [2] BOOT  
26. 118-5262 [2] LEVER AS  
27. 157-7237 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
28. 144-0898 C [2] ROD AS  
29. 128-6150 [1] FILM-INSTRUCTION  
30. 136-7439 BC [12] SPACER (20X40X3-MM THK)  
31. 136-7440 B [16] SHIM (1-MM THK)  
32. 8T-4133 M [14] NUT (M10X1.5-THD)  
33. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
34. 142-7404 [2] ROD  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
37. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 9R-9722 [4] ROD  
39. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
40. 6V-8932 CM [2] SETSCREW-SOCKET (M6X1X10-MM)  
41. 142-7405 C [2] COLLAR  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP25490682
 

112-1842: CONTROL GP-HYDRAULIC HAND

112-1842 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
4 LEVER
PART OF 119-4005, 121-8333, 126-0188 HYDRAULIC AR
AN ATTACHMENT
i00200871 SEBP2549
1121842 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [2] ROD END  
2. 8T-9000 [1] KNOB  
3. 9R-2806 [2] PIN  
4. 9R-2807 [2] CLIP (RETAINER)  
5. 116-3016 [1] LEVER AS  
  5V-4410 [1] BUSHING  
6. 116-3018 [1] ROD  
7. 136-7439 B [1] SPACER (20X40X3-MM THK)  
8. 136-7440 B [1] SHIM (1-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 101-2788 J [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
11. 117-5672 [1] BOOT  
12. 123-3119 [1] PLATE  
13. 186-2854 L [1] FILM-INSTRUCTION  
  B   USE AS REQUIRED
  J   USE AS REQUIRED WHEN MACHINE IS EQUIPPED WITH E-STICK
  L   USE AS REQUIRED ON MACHINES WITHOUT E-STICK
  M   METRIC PART
 

#SEBP25490683
 

126-5004: CONTROL GP-HYDRAULIC HAND

126-5004 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
EXCAVATOR, FIELD
AN ATTACHMENT
i00201132 SEBP2549
1265004 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6431 [2] ROD END  
2. 9R-1968 [6] SPACER (10.6X13.6X7-MM THK)  
3. 006-8606 [1] RING-RETAINING  
4. 117-1052 [1] SHAFT AS  
5. 117-1051 [1] PLATE AS  
6. 118-5262 [2] LEVER AS  
    (EACH INCLUDES)
7. 5V-4410 [2] BUSHING  
8. 9R-3067 [1] PIN  
9. 128-6150 [1] FILM-INSTRUCTION  
10. 136-7440 B [8] SHIM (1-MM THK)  
11. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)(M10X1.50X20MM)  
12. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
13. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4815 [2] ROD END  
15. 9R-2806 [2] PIN  
16. 9R-2807 [6] CLIP (RETAINER)  
17. 8T-4133 M [6] NUT (M10X1.5-THD)  
18. 136-7439 B [8] SPACER (20X40X3-MM THK)  
19. 142-7404 [2] ROD  
20. 144-0898 [2] ROD AS  
21. 142-7405 [2] COLLAR  
22. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490684
 

134-4407: CONTROL GP-HYDRAULIC HAND

134-4407 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
PART OF 112-1848, 119-8178, 119-8179, 119-8180, 119-8181, 139-9152, 139-9153 HYDRAULIC AR
AN ATTACHMENT
i00202178 SEBP2549
1344407 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-3984 [1] KNOB  
4. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [1] ROD END  
7. 9R-2806 [1] PIN  
8. 9R-2807 [1] CLIP (RETAINER)  
9. 9R-9953 [1] ROD  
10. 104-1967 [1] LEVER AS  
10A. 1K-6649 [1] BUSHING-OILLESS  
  8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
11. 8T-4133 M [2] NUT (M10X1.5-THD)  
12. 117-5671 A [1] BOOT  
    (PART OF 112-1848,119-8178, 119-8179, 119-8180, 119-8181, 139-9152, 139-9153, 143-3947, 143-3948, 143-3949, 143-3950,
    143-3951 & 143-3952 HYDRAULIC AR)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490685
 

139-9415: CONTROL GP-HYDRAULIC HAND

139-9415 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
3 LEVER FOOT
AN ATTACHMENT
i00497282 SEBP2549
1399415 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-3984 [2] KNOB  
3. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [1] BALL JOINT  
5. 8T-4815 [10] ROD END  
6. 8T-6431 [1] ROD END  
7. 8T-6658 [1] PIN  
8. 8T-9000 [3] KNOB  
9. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2807 [14] CLIP (RETAINER)  
11. 9R-3135 [3] PIN  
12. 9R-4764 [1] ROD  
13. 9R-8825 [4] PLATE  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [2] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 006-8606 [2] RING-RETAINING  
18. 115-6455 [1] LEVER AS  
  5V-4410 [2] BUSHING  
19. 115-6456 [1] LEVER AS  
  5V-4410 [2] BUSHING  
20. 115-6457 [1] LEVER AS  
  5V-4410 [2] BUSHING  
21. 116-2449 [1] SHAFT AS  
22. 116-2452 [1] PLATE  
23. 116-3019 [3] ROD  
24. 116-4372 [1] SHAFT AS  
25. 116-4373 [1] SHAFT AS  
26. 116-4374 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
27. 116-4375 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
28. 116-4381 [2] SEAL  
29. 116-4478 [1] BOSS AS  
  5V-4410 [1] BUSHING  
30. 117-5672 [5] BOOT  
31. 123-2846 [1] SUPPORT AS  
32. 123-3119 [1] PLATE  
33. 126-4358 [2] PLATE  
34. 128-6151 [1] FILM-INSTRUCTION  
35. 130-3291 [1] PLATE AS  
36. 130-3292 [1] PLATE AS  
37. 130-3293 [1] ROD AS  
38. 130-3294 [1] ROD AS  
39. 130-3858 [2] MAT  
40. 136-7439 B [12] SPACER (20X40X3-MM THK)  
41. 136-7440 B [11] SHIM (1-MM THK)  
42. 139-9414 [1] PLATE  
43. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
44. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
45. 7X-2535 M [2] BOLT (M6X1X60-MM)  
46. 8T-4133 M [14] NUT (M10X1.5-THD)  
47. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
48. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
49. 9R-2806 [10] PIN  
50. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
51. 141-1762 [3] SPACER (21.2X25.4X20-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490686
 

139-9416: CONTROL GP-HYDRAULIC HAND

139-9416 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
3 LEVER FOOT, EXTENDABLE STICK, FIELD INSTALLATION
AN ATTACHMENT
i00497333 SEBP2549
1399416 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-3984 [2] KNOB  
3. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4773 [1] BALL JOINT  
5. 8T-4815 [12] ROD END  
6. 8T-6431 [1] ROD END  
7. 8T-6658 [1] PIN  
8. 8T-9000 [4] KNOB  
9. 9R-1968 [2] SPACER (10.6X13.6X7-MM THK)  
10. 9R-2807 [16] CLIP (RETAINER)  
11. 9R-3135 [3] PIN  
12. 9R-4764 [1] ROD  
13. 9R-8825 [4] PLATE  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [2] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 006-8606 [2] RING-RETAINING  
18. 101-2788 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
19. 115-6455 [1] LEVER AS  
  5V-4410 [2] BUSHING  
20. 115-6456 [1] LEVER AS  
  5V-4410 [2] BUSHING  
21. 115-6457 [1] LEVER AS  
  5V-4410 [2] BUSHING  
22. 116-2449 [1] SHAFT AS  
23. 116-2452 [1] PLATE  
24. 116-3016 [1] LEVER AS  
  5V-4410 [1] BUSHING  
25. 116-3018 [1] ROD  
26. 116-3019 [3] ROD  
27. 116-4372 [1] SHAFT AS  
28. 116-4373 [1] SHAFT AS  
29. 116-4374 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
30. 116-4375 [1] SUPPORT AS  
  5V-4410 [2] BUSHING  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
31. 116-4381 [2] SEAL  
32. 116-4478 [1] BOSS AS  
  5V-4410 [1] BUSHING  
33. 117-5672 [6] BOOT  
34. 123-2846 [1] SUPPORT AS  
35. 123-3119 [2] PLATE  
36. 126-4358 [2] PLATE  
37. 128-6151 [1] FILM-INSTRUCTION  
38. 130-3291 [1] PLATE AS  
39. 130-3292 [1] PLATE AS  
40. 130-3293 [1] ROD AS  
41. 130-3294 [1] ROD AS  
42. 130-3858 [2] MAT  
43. 136-7439 B [10] SPACER (20X40X3-MM THK)  
44. 136-7440 B [14] SHIM (1-MM THK)  
45. 6V-7743 M [2] LOCKNUT (M6X1-THD)  
46. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
47. 7X-2535 M [2] BOLT (M6X1X60-MM)  
48. 8T-4133 M [16] NUT (M10X1.5-THD)  
49. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
50. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
51. 9R-2806 [12] PIN  
52. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
53. 141-1762 [2] SPACER (21.2X25.4X20-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490687
 

9R-9705: CONTROL GP-HYDRAULIC HAND

9R-9705 CONTROL GP-HYDRAULIC HAND
S/N 1WR1-8115
AN ATTACHMENT
i00200774 SEBP2549
9R9705 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7439 B [4] SPACER (20X40X3-MM THK)  
2. 8C-3392 [2] ROD END  
3. 8T-3984 [2] KNOB  
4. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [4] BALL JOINT  
6. 8T-4815 [8] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-2806 [8] PIN  
10. 9R-2807 [8] CLIP (RETAINER)  
11. 9R-8087 [1] LEVER AS  
  9R-9973 [1] PLATE AS (LH)  
12. 9R-9709 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
13. 9R-9720 [2] BRACKET AS  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [6] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 9R-9969 [2] BEARING  
18. 9R-9972 [1] LEVER AS  
  9R-9975 [1] PLATE AS (RH)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 104-9483 [1] PLATE  
21. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
22. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
23. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
24. 117-5672 [2] BOOT  
25. 8T-4133 M [12] NUT (M10X1.5-THD)  
26. 110-1463 [1] PLATE-INSTRUCTION  
27. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
28. 006-8606 [2] RING-RETAINING  
29. 136-7440 B [8] SHIM (1-MM THK)  
30. 157-7237 [1] BRACKET AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25490688
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 1WR1-8115
AN ATTACHMENT
i00200824 SEBP2549
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP25490689
 

106-6373: CONTROL GP-HYDRAULIC PEDAL

106-6373 CONTROL GP-HYDRAULIC PEDAL
S/N 1WR1-8115
PART OF 106-6253, 121-8326, 121-8327, 121-8331 HYDRAULIC AR
AN ATTACHMENT
i00200838 SEBP2549
1066373 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 106-6374 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
14. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
15. 8T-4773 [1] BALL JOINT  
16. 8T-4815 [1] ROD END  
17. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Backhoe Extendable Stick Control (Foot Operated)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Four Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Foot Swing Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Standard Pattern) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Excavator Pattern)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Auxiliary Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Multipurpose Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Bracket Modification for Improved Control Groups{5063}
Bracket Modification for Improved Control Groups{5063}
Service Letter-NACD
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Technical Information Bulletin
E-Stick Pedal Linkage Change
E-Stick Pedal Linkage Change
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Specifications
Hydraulic Hand Control (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
An Improved Bucket Lever Will Increase Service Life {5063}
2001/10/15
The Revised Special Instruction, REHS0325 , "Bracket Modification for Improved Control Groups" Can Be Ordered {5063}
2003/05/12

Caterpillar Parts SIS Catalog 416C :

CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1834 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1810 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1810 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-SIDE
104-3919 CONSOLE GP-SIDE
CONSOLE GP-REAR
104-3921 CONSOLE GP-REAR
CONSOLE GP-FRONT
104-6044 CONSOLE GP-FRONT
CONSOLE GP-FRONT
104-3923 CONSOLE GP-FRONT
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5004 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
134-4407 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9415 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9416 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.