POWER TRAIN
AXLE GPBRAKING SYSTEM
BRAKE GPPOWER TRAIN
AXLE GP
#SEBP25520220
107-3716: AXLE & MTG GP-REAR
107-3716 AXLE & MTG GP-REAR
S/N 7WN1-938
PART OF 118-9126, 137-6844, 143-1783, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 7WN1-938
PART OF 118-9126, 137-6844, 143-1783, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25520221
114-0165: AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
S/N 7WN1-938
PART OF 118-9125, 118-9127, 147-9646, 147-9647 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 7WN1-938
PART OF 118-9125, 118-9127, 147-9646, 147-9647 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
#SEBP25520222
114-0165: AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
S/N 7WN439-938
PART OF 143-1782, 143-1784, 147-9647, 147-9649, 147-9650 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 7WN439-938
PART OF 143-1782, 143-1784, 147-9647, 147-9649, 147-9650 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-5434 | [1] | VALVE AS-VENT (FINAL DRIVE, AXLE) | |
| 2. | 156-2857 CY | [1] | AXLE GP-REAR | |
| 3. | 7X-2570 M | [8] | BOLT (M20X2.5X220-MM) | |
| 4. | 8T-4131 M | [8] | NUT (M20X2.5-THD) | |
| 5. | 8T-5439 | [16] | WASHER-HARD (21.5X45X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25520223
110-8631: AXLE GP-DRIVE & STEERING
110-8631 AXLE GP-DRIVE & STEERING -FRONT
S/N 7WN1-938; 1ER1-863
PART OF 112-9630 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
S/N 7WN1-938; 1ER1-863
PART OF 112-9630 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-6108 | [1] | GEAR SET-BEVEL | |
| 2. | 130-3809 | [1] | TIE ROD AS (RH) | |
| 3. | 130-3012 | [1] | TIE ROD AS (LH) | |
| (EACH TIE ROD AS INCLUDES) | ||||
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-7043 | [1] | JOINT | ||
| 4. | 130-3011 Y | [1] | CYLINDER GP-STEERING | |
| 5. | 130-3850 B | [1] | SHIM (0.8-MM THK) | |
| 054-6459 B | [1] | SHIM (1-MM THK) | ||
| 054-6460 B | [1] | SHIM (1.05-MM THK) | ||
| 054-6461 B | [1] | SHIM (1.1-MM THK) | ||
| 054-6462 B | [1] | SHIM (1.15-MM THK) | ||
| 054-6463 B | [1] | SHIM (1.2-MM THK) | ||
| 054-6464 B | [1] | SHIM (1.25-MM THK) | ||
| 054-6465 B | [1] | SHIM (1.3-MM THK) | ||
| 054-6466 B | [1] | SHIM (1.35-MM THK) | ||
| 054-6467 B | [1] | SHIM (1.4-MM THK) | ||
| 054-6468 B | [1] | SHIM (1.45-MM THK) | ||
| 054-6469 B | [1] | SHIM (1.5-MM THK) | ||
| 054-6470 B | [1] | SHIM (1.55-MM THK) | ||
| 054-6471 B | [1] | SHIM (1.6-MM THK) | ||
| 054-6472 B | [1] | SHIM (0.95-MM THK) | ||
| 054-6473 B | [1] | SHIM (0.9-MM THK) | ||
| 054-6474 B | [1] | SHIM (0.65-MM THK) | ||
| 054-6475 B | [1] | SHIM (0.7-MM THK) | ||
| 054-6476 B | [1] | SHIM (0.75-MM THK) | ||
| 054-6477 B | [1] | SHIM (0.85-MM THK) | ||
| 6. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 7. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 8. | 130-6689 B | [1] | RING (15.1-MM THK) | |
| 130-6690 B | [1] | RING (15.2-MM THK) | ||
| 130-6691 B | [1] | RING (15.26-MM THK) | ||
| 130-6693 B | [1] | RING (15.3-MM THK) | ||
| 130-6694 B | [1] | RING (15.33-MM THK) | ||
| 130-6695 B | [1] | RING (15.36-MM THK) | ||
| 130-6696 B | [1] | RING (15.38-MM THK) | ||
| 130-6697 B | [1] | RING (15.4-MM THK) | ||
| 130-6698 B | [1] | RING (15.43-MM THK) | ||
| 130-6699 B | [1] | RING (15.46-MM THK) | ||
| 130-6701 B | [1] | RING (15.48-MM THK) | ||
| 130-6702 B | [1] | RING (15.5-MM THK) | ||
| 130-6703 B | [1] | RING (15.53-MM THK) | ||
| 130-6704 B | [1] | RING (15.56-MM THK) | ||
| 130-6705 B | [1] | RING (15.58-MM THK) | ||
| 130-6706 B | [1] | RING (15.6-MM THK) | ||
| 130-6707 B | [1] | RING (15.63-MM THK) | ||
| 130-6708 B | [1] | RING (15.66-MM THK) | ||
| 130-6709 B | [1] | RING (15.68-MM THK) | ||
| 130-6710 B | [1] | RING (15.7-MM THK) | ||
| 130-6711 B | [1] | RING (15.73-MM THK) | ||
| 130-6712 B | [1] | RING (15.8-MM THK) | ||
| 130-6713 B | [1] | RING (15.83-MM THK) | ||
| 130-6714 B | [1] | RING (15.86-MM THK) | ||
| 130-6715 B | [1] | RING (15.9-MM THK) | ||
| 130-6716 B | [1] | RING (15.93-MM THK) | ||
| 130-6718 B | [1] | RING (15.96-MM THK) | ||
| 130-6719 B | [1] | RING (16-MM THK) | ||
| 130-6720 B | [1] | RING (16.03-MM THK) | ||
| 130-6721 B | [1] | RING (16.06-MM THK) | ||
| 130-6722 B | [1] | RING (16.1-MM THK) | ||
| 130-6724 B | [1] | RING (16.13-MM THK) | ||
| 130-6725 B | [1] | RING (16.16-MM THK) | ||
| 130-6726 B | [1] | RING (16.2-MM THK) | ||
| 130-6727 B | [1] | RING (16.23-MM) | ||
| 130-6728 B | [1] | RING (16.26-MM THK) | ||
| 130-6729 B | [1] | RING (16.3-MM THK) | ||
| 130-6731 B | [1] | RING (16.4-MM THK) | ||
| 130-6732 B | [1] | RING (16.76-MM THK) | ||
| 9. | 9R-3168 M | [4] | SCREW (M10X1.5X20-MM) | |
| 10. | 119-7061 | [2] | PLUG | |
| 11. | 130-6878 | [6] | RING | |
| 12. | 169-4162 | [6] | CONE-BEARING | |
| 13. | 169-4161 | [6] | CONE-BEARING | |
| 14. | 169-4160 | [6] | GEAR | |
| 15. | 130-7027 | [2] | CARRIER | |
| 16. | 119-7042 | [2] | SHAFT | |
| 17. | 119-7040 | [2] | GEAR-RING | |
| 18. | 130-3007 | [2] | NUT | |
| 19. | 119-7060 M | [2] | SCREW-STOP (M14X1.5X50-MM) | |
| 20. | 130-7047 | [16] | STUD | |
| 21. | 130-3008 M | [16] | BOLT (M10X1.5X45-MM) | |
| 22. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 23. | 6V-0832 | [4] | CONE | |
| 24. | 130-6879 | [2] | SEAL | |
| 25. | 9X-0640 | [2] | SEAL-O-RING | |
| 26. | 130-3014 Y | [1] | SHAFT GP-DRIVE (LH) | |
| 27. | 130-3013 Y | [1] | SHAFT GP-DRIVE (RH) | |
| 28. | 054-6589 | [2] | CLIP | |
| 29. | 119-7045 | [2] | SEAL | |
| 30. | 7X-5771 | [2] | RING-RETAINING | |
| 31. | 131-3816 | [2] | RING | |
| 32. | 119-7053 | [2] | FLANGE | |
| 33. | 5P-9439 | [2] | BALL BEARING | |
| 34. | 130-6677 | [16] | BOLT (M12X1.75X30-MM) | |
| 35. | 130-7026 | [2] | PIN | |
| 36. | 119-7038 | [2] | PIN | |
| 37. | 130-7008 B | [2] | SHIM (0.2-MM THK) | |
| 130-7009 B | [2] | SHIM (0.3-MM THK) | ||
| 130-7010 B | [2] | SHIM (0.4-MM THK) | ||
| 130-7011 B | [2] | SHIM (0.6-MM THK) | ||
| 130-7012 B | [2] | SHIM (0.8-MM THK) | ||
| 130-7013 B | [2] | SHIM (1-MM THK) | ||
| 130-7015 B | [2] | SHIM (1.6-MM THK) | ||
| 130-7017 B | [2] | SHIM (2-MM THK) | ||
| 38. | 119-7047 | [2] | SEAL | |
| 39. | 119-7046 | [2] | SEAL | |
| 40. | 031-0426 | [2] | CUP-BEARING | |
| 41. | 077-3918 | [2] | BEARING | |
| 42. | 119-7057 | [1] | HOUSING (RH) | |
| 43. | 130-7031 | [1] | HOUSING (LH) | |
| 44. | 9R-5246 | [2] | BUSHING | |
| 45. | 130-6877 | [2] | SEAL | |
| 46. | 130-2998 | [2] | BUSHING | |
| 47. | 9X-0796 | [1] | SEAL-O-RING | |
| 48. | 130-6673 | [1] | PLUG | |
| 49. | 9R-3175 | [1] | PLUG | |
| 50. | 054-6526 | [15] | DISC | |
| 51. | 6V-3303 M | [15] | BOLT (M16X2X60-MM) | |
| 52. | 054-6847 | [1] | SEAL-O-RING | |
| 53. | 6V-2200 | [2] | CUP-BEARING | |
| 54. | 003-7501 | [2] | CONE-BEARING | |
| 55. | 130-6798 B | [2] | SHIM (1-MM THK) | |
| 130-6799 B | [2] | WASHER (1.05-MM THK) | ||
| 130-6800 B | [2] | SHIM (1.1-MM THK) | ||
| 130-6801 B | [2] | WASHER (62.2X75X1.15-MM THK) | ||
| 130-6802 B | [2] | WASHER (62.2X75X1.2-MM THK) | ||
| 130-6803 B | [2] | WASHER (62.2X75X1.25-MM THK) | ||
| 130-6804 B | [2] | SHIM (1.3-MM THK) | ||
| 130-6805 B | [2] | SHIM (1.35-MM THK) | ||
| 130-6806 B | [2] | SHIM (1.4-MM THK) | ||
| 130-6807 B | [2] | WASHER (1.45-MM THK) | ||
| 130-6808 B | [2] | SHIM (1.5-MM THK) | ||
| 130-6809 B | [2] | SHIM (1.55-MM THK) | ||
| 130-6810 B | [2] | SHIM (1.6-MM THK) | ||
| 130-6811 B | [2] | SHIM (1.65-MM THK) | ||
| 130-6812 B | [2] | SHIM (1.7-MM THK) | ||
| 130-6813 B | [2] | SHIM (1.75-MM THK) | ||
| 130-6814 B | [2] | SHIM (1.8-MM THK) | ||
| 130-6815 B | [2] | SHIM (1.85-MM THK) | ||
| 130-6816 B | [2] | SHIM (1.9-MM THK) | ||
| 130-6817 B | [2] | WASHER (62.2X75X1.95-MM THK) | ||
| 130-6818 B | [2] | WASHER (62.2X75X2-MM THK) | ||
| 130-6819 B | [2] | WASHER (62.2X75X2.05-MM THK) | ||
| 130-6820 B | [2] | SHIM (2.1-MM THK) | ||
| 56. | 119-7056 | [1] | HOUSING (LH) | |
| 57. | 119-7055 | [1] | HOUSING (RH) | |
| 58. | 130-6675 | [1] | PIN | |
| 59. | 082-3077 | [4] | PIN | |
| 60. | 130-3010 | [4] | PIN | |
| 61. | 105-3484 M | [12] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 62. | 119-7036 | [1] | PIN | |
| 63. | 9R-6994 | [2] | WASHER-THRUST | |
| 64. | 128-7855 | [2] | GEAR-PINION | |
| 65. | 119-7035 | [2] | GEAR | |
| 66. | 008-1902 | [3] | CONE-BEARING | |
| 67. | 6S-3051 | [3] | CUP-BEARING | |
| 68. | 055-1986 | [1] | SEAL-LIP TYPE | |
| 69. | 130-7046 | [1] | FLANGE | |
| 70. | 130-7028 | [1] | PLATE | |
| 71. | 054-6480 | [1] | DISC | |
| 72. | 130-3005 M | [1] | NUT (M24X2-THD) | |
| 73. | 130-7024 | [1] | CASE | |
| 74. | 130-7048 B | [2] | RING (13.5-MM THK) | |
| 130-7049 B | [2] | RING (13.6-MM THK) | ||
| 130-7050 B | [2] | RING (13.7-MM THK) | ||
| 75. | 130-3000 M | [2] | WASHER (53.2X71.9X1.9-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25520224
110-8632: AXLE GP-DRIVE & STEERING
110-8632 AXLE GP-DRIVE & STEERING -FRONT
S/N 7WN1-938; 1ER1-863
RATIO 14.62
PART OF 112-9631 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
S/N 7WN1-938; 1ER1-863
RATIO 14.62
PART OF 112-9631 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-7035 | [2] | GEAR | |
| 2. | 130-3809 | [1] | TIE ROD AS (RH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6880 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 3. | 130-3012 | [1] | TIE ROD AS (LH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6881 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 4. | 178-7190 Y | [1] | CYLINDER GP-STEERING | |
| 5. | 130-7008 B | [2] | SHIM (0.2-MM THK) | |
| 130-7009 B | [2] | SHIM (0.3-MM THK) | ||
| 130-7010 B | [2] | SHIM (0.4-MM THK) | ||
| 130-7011 B | [2] | SHIM (0.6-MM THK) | ||
| 130-7012 B | [2] | SHIM (0.8-MM THK) | ||
| 130-7013 B | [2] | SHIM (1-MM THK) | ||
| 130-7015 B | [2] | SHIM (1.6-MM THK) | ||
| 130-7017 B | [2] | SHIM (2-MM THK) | ||
| 6. | 107-5608 | [1] | GEAR SET-BEVEL | |
| 7. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 8. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 9. | 130-6689 B | [1] | RING (15.1-MM THK) | |
| 130-6690 B | [1] | RING (15.2-MM THK) | ||
| 130-6691 B | [1] | RING (15.26-MM THK) | ||
| 130-6693 B | [1] | RING (15.3-MM THK) | ||
| 130-6694 B | [1] | RING (15.33-MM THK) | ||
| 130-6695 B | [1] | RING (15.36-MM THK) | ||
| 130-6696 B | [1] | RING (15.38-MM THK) | ||
| 130-6697 B | [1] | RING (15.4-MM THK) | ||
| 130-6698 B | [1] | RING (15.43-MM THK) | ||
| 130-6699 B | [1] | RING (15.46-MM THK) | ||
| 130-6701 B | [1] | RING (15.48-MM THK) | ||
| 130-6702 B | [1] | RING (15.5-MM THK) | ||
| 130-6703 B | [1] | RING (15.53-MM THK) | ||
| 130-6704 B | [1] | RING (15.56-MM THK) | ||
| 130-6705 B | [1] | RING (15.58-MM THK) | ||
| 130-6706 B | [1] | RING (15.6-MM THK) | ||
| 130-6707 B | [1] | RING (15.63-MM THK) | ||
| 130-6708 B | [1] | RING (15.66-MM THK) | ||
| 130-6709 B | [1] | RING (15.68-MM THK) | ||
| 130-6710 B | [1] | RING (15.7-MM THK) | ||
| 130-6711 B | [1] | RING (15.73-MM THK) | ||
| 130-6712 B | [1] | RING (15.8-MM THK) | ||
| 130-6713 B | [1] | RING (15.83-MM THK) | ||
| 130-6714 B | [1] | RING (15.86-MM THK) | ||
| 130-6715 B | [1] | RING (15.9-MM THK) | ||
| 130-6716 B | [1] | RING (15.93-MM THK) | ||
| 130-6718 B | [1] | RING (15.96-MM THK) | ||
| 130-6719 B | [1] | RING (16-MM THK) | ||
| 130-6720 B | [1] | RING (16.03-MM THK) | ||
| 130-6721 B | [1] | RING (16.06-MM THK) | ||
| 130-6722 B | [1] | RING (16.1-MM THK) | ||
| 130-6724 B | [1] | RING (16.13-MM THK) | ||
| 130-6725 B | [1] | RING (16.16-MM THK) | ||
| 130-6726 B | [1] | RING (16.2-MM THK) | ||
| 130-6727 B | [1] | RING (16.23-MM) | ||
| 130-6728 B | [1] | RING (16.26-MM THK) | ||
| 130-6729 B | [1] | RING (16.3-MM THK) | ||
| 130-6731 B | [1] | RING (16.4-MM THK) | ||
| 130-6732 B | [1] | RING (16.76-MM THK) | ||
| 10. | 243-5336 M | [4] | BOLT (M10X1.5X20-MM) | |
| 11. | 119-7061 | [2] | PLUG | |
| 12. | 130-6878 | [6] | RING | |
| 13. | 169-4162 | [6] | CONE-BEARING | |
| 14. | 169-4161 | [6] | CONE-BEARING | |
| 15. | 169-4160 | [6] | GEAR | |
| 16. | 130-7027 | [2] | CARRIER | |
| 17. | 119-7042 | [2] | SHAFT | |
| 18. | 119-7040 | [2] | GEAR-RING | |
| 19. | 130-3007 | [2] | NUT | |
| 20. | 119-7060 M | [2] | SCREW-STOP (M14X1.5X50-MM) | |
| 21. | 130-7047 | [16] | STUD | |
| 22. | 311-8193 M | [16] | BOLT (M10X1.5X45-MM) | |
| 23. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 24. | 178-8608 | [4] | CONE-TAPERED | |
| 25. | 130-6879 | [2] | SEAL | |
| 26. | 9X-0640 | [2] | SEAL-O-RING | |
| 27. | 130-3014 Y | [1] | SHAFT GP-DRIVE (LH) | |
| 28. | 130-3013 Y | [1] | SHAFT GP-DRIVE (RH) | |
| 29. | 054-6589 | [2] | CLIP | |
| 30. | 119-7045 | [2] | SEAL | |
| 31. | 7X-5771 | [2] | RING-RETAINING | |
| 32. | 131-3816 | [2] | RING | |
| 33. | 119-7053 | [2] | FLANGE | |
| 34. | 5P-9439 | [2] | BALL BEARING | |
| 35. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 36. | 130-7026 | [2] | PIN | |
| 37. | 119-7038 | [2] | PIN | |
| 38. | 9X-0796 | [4] | SEAL-O-RING | |
| 39. | 119-7047 | [2] | SEAL | |
| 40. | 119-7046 | [2] | SEAL | |
| 41. | 031-0426 | [2] | CUP-BEARING | |
| 42. | 077-3918 | [2] | BEARING | |
| 43. | 119-7057 | [1] | HOUSING (RH) | |
| 44. | 130-7031 | [1] | HOUSING (LH) | |
| 45. | 9R-5246 | [2] | BUSHING | |
| 46. | 130-6877 | [2] | SEAL | |
| 47. | 130-2998 | [2] | BUSHING | |
| 48. | 054-6459 B | [1] | SHIM (1-MM THK) | |
| 054-6460 B | [1] | SHIM (1.05-MM THK) | ||
| 054-6461 B | [1] | SHIM (1.1-MM THK) | ||
| 054-6462 B | [1] | SHIM (1.15-MM THK) | ||
| 054-6463 B | [1] | SHIM (1.2-MM THK) | ||
| 054-6464 B | [1] | SHIM (1.25-MM THK) | ||
| 054-6465 B | [1] | SHIM (1.3-MM THK) | ||
| 054-6466 B | [1] | SHIM (1.35-MM THK) | ||
| 054-6467 B | [1] | SHIM (1.4-MM THK) | ||
| 054-6468 B | [1] | SHIM (1.45-MM THK) | ||
| 054-6469 B | [1] | SHIM (1.5-MM THK) | ||
| 054-6470 B | [1] | SHIM (1.55-MM THK) | ||
| 054-6471 B | [1] | SHIM (1.6-MM THK) | ||
| 054-6472 B | [1] | SHIM (0.95-MM THK) | ||
| 054-6473 B | [1] | SHIM (0.9-MM THK) | ||
| 054-6474 B | [1] | SHIM (0.65-MM THK) | ||
| 054-6475 B | [1] | SHIM (0.7-MM THK) | ||
| 054-6476 B | [1] | SHIM (0.75-MM THK) | ||
| 054-6477 B | [1] | SHIM (0.85-MM THK) | ||
| 130-3850 B | [1] | SHIM (0.8-MM THK) | ||
| 49. | 130-6673 | [1] | PLUG | |
| 50. | 9R-3175 | [1] | PLUG | |
| 51. | 054-6526 | [15] | DISC | |
| 52. | 6V-3303 M | [15] | BOLT (M16X2X60-MM) | |
| 53. | 054-6847 | [1] | SEAL-O-RING | |
| 54. | 6V-2200 | [2] | CUP-BEARING | |
| 55. | 003-7501 | [2] | CONE-BEARING | |
| 56. | 130-6798 B | [2] | SHIM (1-MM THK) | |
| 130-6799 B | [2] | WASHER (1.05-MM THK) | ||
| 130-6800 B | [2] | SHIM (1.1-MM THK) | ||
| 130-6801 B | [2] | WASHER (62.2X75X1.15-MM THK) | ||
| 130-6802 B | [2] | WASHER (62.2X75X1.2-MM THK) | ||
| 130-6803 B | [2] | WASHER (62.2X75X1.25-MM THK) | ||
| 130-6804 B | [2] | SHIM (1.3-MM THK) | ||
| 130-6805 B | [2] | SHIM (1.35-MM THK) | ||
| 130-6806 B | [2] | SHIM (1.4-MM THK) | ||
| 130-6807 B | [2] | WASHER (1.45-MM THK) | ||
| 130-6808 B | [2] | SHIM (1.5-MM THK) | ||
| 130-6809 B | [2] | SHIM (1.55-MM THK) | ||
| 130-6810 B | [2] | SHIM (1.6-MM THK) | ||
| 130-6811 B | [2] | SHIM (1.65-MM THK) | ||
| 130-6812 B | [2] | SHIM (1.7-MM THK) | ||
| 130-6813 B | [2] | SHIM (1.75-MM THK) | ||
| 130-6814 B | [2] | SHIM (1.8-MM THK) | ||
| 130-6815 B | [2] | SHIM (1.85-MM THK) | ||
| 130-6816 B | [2] | SHIM (1.9-MM THK) | ||
| 130-6817 B | [2] | WASHER (62.2X75X1.95-MM THK) | ||
| 130-6818 B | [2] | WASHER (62.2X75X2-MM THK) | ||
| 130-6819 B | [2] | WASHER (62.2X75X2.05-MM THK) | ||
| 130-6820 B | [2] | SHIM (2.1-MM THK) | ||
| 57. | 119-7056 | [1] | HOUSING (LH) | |
| 58. | 119-7055 | [1] | HOUSING (RH) | |
| 59. | 130-6675 | [1] | PIN | |
| 60. | 082-3077 | [4] | PIN | |
| 61. | 130-3010 | [4] | PIN | |
| 62. | 105-3484 M | [12] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 63. | 119-7036 | [1] | PIN | |
| 64. | 9R-6994 | [2] | WASHER-THRUST | |
| 65. | 128-7855 | [2] | GEAR-PINION | |
| 66. | 130-3000 M | [2] | WASHER (53.2X71.9X1.9-MM THK) | |
| 67. | 008-1902 | [3] | CONE-BEARING | |
| 68. | 6S-3051 | [3] | CUP-BEARING | |
| 69. | 055-1986 | [1] | SEAL-LIP TYPE | |
| 70. | 130-7046 | [1] | FLANGE | |
| 71. | 130-7028 | [1] | PLATE | |
| 72. | 054-6480 | [1] | DISC | |
| 73. | 130-3005 M | [1] | NUT (M24X2-THD) | |
| 74. | 130-7024 | [1] | CASE | |
| 75. | 130-7048 B | [2] | RING (13.5-MM THK) | |
| 130-7049 B | [2] | RING (13.6-MM THK) | ||
| 130-7050 B | [2] | RING (13.7-MM THK) | ||
| 76. | 493-8891 B | [2] | RING (11-MM THK) | |
| 493-8892 B | [2] | RING (11.1-MM THK) | ||
| 493-8893 B | [2] | RING (11.2-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25520225
111-1523: AXLE GP-DRIVE & STEERING
111-1523 AXLE GP-DRIVE & STEERING -REAR
S/N 1ER1-863
RATIO 18.62. ALL WHEEL STEER
PART OF 112-2113 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
S/N 1ER1-863
RATIO 18.62. ALL WHEEL STEER
PART OF 112-2113 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-2462 | [10] | SPRING | |
| 2. | 8U-3591 | [10] | SPACER (6.5X15X7-MM THK) | |
| 3. | 7X-2619 M | [10] | BOLT (M6X1X10-MM) | |
| 4. | 110-0878 | [10] | PIN | |
| 5. | 110-4748 | [16] | NUT | |
| 6. | 009-3819 | [1] | CONE-BEARING | |
| 7. | 110-0880 | [2] | CARRIER-DISC | |
| 8. | 110-4752 B | [4] | SHIM | |
| 9. | 110-0876 | [6] | SCREW | |
| 10. | 1G-6735 | [8] | PIN-GROOVED | |
| 11. | 110-0877 | [6] | PIN | |
| 12. | 110-4736 | [6] | RING | |
| 13. | 110-0870 | [10] | PLATE | |
| 14. | 110-0842 | [8] | DISC-FRICTION | |
| 15. | 110-4757 | [2] | RING | |
| 16. | 110-4755 | [2] | RING | |
| 17. | 110-4756 | [2] | RING | |
| 18. | 110-4758 | [2] | RING | |
| 19. | 2D-9191 | [1] | CONE-BEARING | |
| 20. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK)(16.16MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK)(16.96MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK)(17MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK)(17.02MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK)(17.06MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK)(17.08MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK)(17.12MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK)(17.14MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK)(17.16MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK)(17.18MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK)(17.22MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK)(17.24MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK)(17.26MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK)(17.28MM THK) | ||
| 21. | 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | |
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | ||
| 22. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5557 B | [1] | DISC (1.25-M THK) | ||
| 5W-5558 B | [1] | DISC (1.35-MM THK) | ||
| 5W-5559 B | [1] | DISC (1.45-MM THK) | ||
| 5W-5560 B | [1] | DISC (1.55-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 5W-5562 B | [1] | DISC (1.75-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 23. | 110-2461 M | [8] | BOLT (M16X1.5X100-MM) | |
| 24. | 110-2457 | [4] | PIN-SPRING | |
| 25. | 110-2458 | [4] | PIN-SPRING | |
| 26. | 110-2467 | [1] | SHAFT-DIFFERENTIAL | |
| 27. | 213-9783 | [6] | BEARING-ROLLER | |
| 28. | 110-0845 | [4] | WASHER-THRUST | |
| 29. | 110-0855 | [2] | GEAR-AXLE BEVEL | |
| 30. | 110-0852 | [2] | DISC-PRESSURE | |
| 31. | 110-0854 | [8] | DISC-FRICTION | |
| 32. | 110-0853 | [10] | PLATE | |
| 33. | 223-2127 | [1] | HOUSING-DIFFERENTIAL | |
| 34. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 35. | 213-9759 | [4] | GEAR-BEVEL | |
| 36. | 193-1132 | [6] | GEAR-PLANETARY | |
| 37. | 190-8590 | [12] | RING-SNAP | |
| 38. | 110-0867 | [1] | HOUSING-AXLE DRIVE | |
| 39. | 110-0883 | [2] | HOUSING-BRAKE | |
| 40. | 190-8567 B | [1] | SHIM (1-MM THK) | |
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 110-0124 | [1] | SHIM (2-MM THK) | ||
| 110-0122 | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 | [1] | SHIM (1.2-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK)(0.75MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK)(0.65MM THK) | ||
| 193-1125 B | [1] | SHIM (0.1-MM THK)(0.1MM THK) | ||
| 193-1127 B | [1] | SHIM (0.15-MM THK)(0.15MM THK) | ||
| 193-1128 B | [1] | WASHER (0.1-MM THK)(0.1MM THK) | ||
| 193-1129 B | [1] | WASHER (0.15-MM THK)(0.15MM THK) | ||
| 193-1130 B | [1] | WASHER (0.5-MM THK)(0.5MM THK) | ||
| 41. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 110-4746 | [1] | SEAL | |
| 43. | 110-0856 | [1] | CAP-PROTECTION | |
| 44. | 113-5988 | [1] | FLANGE | |
| 45. | 110-4791 | [1] | HOUSING-AXLE | |
| 46. | 110-4749 | [2] | PLUG | |
| 47. | 110-2463 | [1] | BEARING-ROLLER | |
| 48. | 110-0180 B | [2] | WASHER (90X99.8X0.3-MM THK) | |
| 6T-8671 B | [2] | SHIM (0.8-MM THK) | ||
| 6T-8672 B | [2] | SHIM (0.7-MM THK) | ||
| 6T-8673 B | [2] | SHIM (0.6-MM THK) | ||
| 6T-8674 B | [2] | SHIM (0.5-MM THK) | ||
| 6T-8675 B | [2] | SHIM (0.4-MM THK) | ||
| 110-0167 B | [2] | WASHER (90X99.8X0.85-MM THK) | ||
| 110-0168 B | [2] | WASHER (90X99.8X0.75-MM THK) | ||
| 110-0169 B | [2] | WASHER (90X99.8X0.65-MM THK) | ||
| 110-0170 B | [2] | WASHER (0.55-MM THK) | ||
| 110-0177 B | [2] | WASHER (90X99.8X0.45-MM THK) | ||
| 110-0178 B | [2] | WASHER (90X99.8X0.35-MM THK) | ||
| 110-0181 B | [2] | RING (2-MM THK) | ||
| 110-0182 B | [2] | RING (1.95-MM THK) | ||
| 110-0183 B | [2] | RING (1.9-MM THK) | ||
| 110-0184 B | [2] | RING (1.85-MM THK) | ||
| 098-2961 B | [2] | SHIM (1.7-MM THK) | ||
| 098-2962 B | [2] | SHIM (1.8-MM THK) | ||
| 098-2959 B | [2] | SHIM (1.5-MM THK) | ||
| 098-2960 B | [2] | SHIM (1.6-MM THK) | ||
| 098-2957 B | [2] | SHIM (1.3-MM THK) | ||
| 098-2958 B | [2] | SHIM (1.4-MM THK) | ||
| 6T-8668 B | [2] | SHIM (1.2-MM THK) | ||
| 6T-8669 B | [2] | SHIM (1.1-MM THK) | ||
| 6T-8670 B | [2] | SHIM (1-MM THK) | ||
| 110-0191 B | [2] | RING (1.25-MM THK) | ||
| 110-0192 B | [2] | RING (1.15-MM THK) | ||
| 110-0193 B | [2] | RING (1.05-MM THK) | ||
| 110-0194 B | [2] | RING (0.95-MM THK) | ||
| 110-0195 B | [2] | RING (0.9-MM THK) | ||
| 49. | 110-0875 | [2] | PISTON | |
| 50. | 110-4753 | [2] | BEARING | |
| 51. | 008-1902 | [2] | CONE-BEARING | |
| 52. | 110-4790 | [1] | HOUSING-AXLE | |
| 53. | 110-4792 | [1] | HOUSING-BRAKE | |
| 110-4793 | [1] | HOUSING-BRAKE | ||
| 54. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 55. | 110-0134 B | [1] | SHIM (0.4-MM THK) | |
| 110-0131 B | [1] | SHIM (1-MM THK) | ||
| 110-0132 B | [1] | SHIM (0.8-MM THK) | ||
| 110-0133 B | [1] | SHIM (0.6-MM THK) | ||
| B | [1] | SHIM (0.3-MM THK) | ||
| 110-0136 B | [1] | SHIM (0.2-MM THK) | ||
| 110-0126 B | [1] | SHIM (2-MM THK) | ||
| 110-0127 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0128 B | [1] | SHIM (1.6-MM THK) | ||
| 56. | 110-0859 | [2] | PIN-BEARING | |
| 57. | 096-9988 M | [8] | BOLT (M14X2X30-MM) | |
| 58. | 9R-6947 | [2] | SEAL-O-RING | |
| 59. | 9R-6952 | [2] | CAP-SEALING | |
| 60. | 110-0884 | [2] | HUB | |
| 61. | 110-0874 | [20] | BOLT-WHEEL | |
| 62. | 110-4745 | [2] | SEAL-O-RING | |
| 63. | 8U-2356 | [4] | BEARING | |
| 64. | 110-0866 | [2] | CARRIER-PLANETARY | |
| 65. | 110-0862 | [2] | GEAR-RING | |
| 66. | 098-2996 | [4] | SEAL-O-RING | |
| 67. | 6S-3051 | [2] | CUP-BEARING | |
| 68. | 110-4737 | [6] | RING-RETAINING | |
| 69. | 4D-8648 | [2] | CUP-BEARING | |
| 70. | 110-0865 | [2] | SHAFT-SUN GEAR | |
| 71. | 009-3818 | [1] | CUP-BEARING | |
| 72. | 110-0846 | [2] | RING-RETAINING | |
| 73. | 2D-9190 | [1] | CUP-BEARING | |
| 74. | 110-0863 | [2] | WASHER-THRUST | |
| 75. | 110-0844 | [2] | WASHER-THRUST | |
| 76. | 110-0849 | [2] | NUT-SLOTTED | |
| 77. | 110-0861 | [2] | WASHER-TAB | |
| 78. | 9R-6965 M | [4] | SCREW (M10X1.5X20-MM) | |
| 79. | 110-0851 | [2] | SEAL | |
| 80. | 110-0850 | [4] | SEAL | |
| 81. | 110-0839 | [2] | BUSHING | |
| 82. | 110-0864 | [2] | RING-RETAINING | |
| 83. | 110-2460 M | [4] | BOLT (M12X1.5X95-MM) | |
| 84. | 8T-6385 M | [32] | BOLT (M16X2X180-MM) | |
| 85. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 86. | 110-4733 | [2] | UNIVERSAL JOINT | |
| 87. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 88. | 110-0860 | [2] | PIN-BEARING | |
| 89. | 130-2701 | [1] | GEAR SET-REAR AXLE | |
| 90. | 110-0843 | [1] | WASHER (31X56X6-MM THK) | |
| 91. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 92. | 110-2456 | [4] | PIN-SPRING | |
| 93. | 110-0840 | [2] | TIE ROD | |
| 94. | 110-0871 | [1] | GUIDE | |
| 95. | 110-0847 | [1] | PLUG-SCREW | |
| 96. | 9R-6953 | [6] | SEAL-O-RING | |
| 97. | 109-4440 | [5] | PLUG | |
| 98. | 110-0841 | [1] | ROD-PISTON | |
| 99. | 110-4754 | [1] | GASKET | |
| 100. | 110-4759 | [2] | GUIDE-PISTON | |
| 101. | 110-0873 | [1] | CYLINDER | |
| 102. | 110-4742 | [2] | SEAL-O-RING | |
| 103. | 110-4739 | [12] | RING-SNAP | |
| 104. | 110-4735 | [4] | RING-GUIDE | |
| 105. | 5W-6392 | [2] | SEAL-O-RING | |
| 106. | 5W-6391 | [2] | SCRAPER | |
| 107. | 110-0872 | [1] | GUIDE | |
| 108. | 110-2459 M | [8] | BOLT (M14X2X105-MM) | |
| 109. | 6V-2652 | [2] | CONE-BEARING | |
| 110. | 110-0858 | [2] | CAP-SEALING | |
| 111. | 110-4743 | [2] | SEAL-O-RING | |
| 112. | 9R-3171 | [4] | FITTING | |
| 225-5014 B | [1] | RING (16.56-MM THK) | ||
| 225-5015 B | [1] | RING (16.62-MM THK) | ||
| 225-5016 B | [1] | RING (16.64-MM THK) | ||
| 225-5017 B | [1] | RING (16.68-MM THK) | ||
| 225-5018 B | [1] | RING (16.72-MM THK) | ||
| 225-5019 B | [1] | RING (16.74-MM THK) | ||
| 225-5020 B | [1] | RING (16.76-MM THK) | ||
| 225-5021 B | [1] | RING (16.76-MM THK) | ||
| 225-5022 B | [1] | RING (16.78-MM THK) | ||
| 225-5023 B | [1] | RING (16.82-MM THK) | ||
| 225-5024 B | [1] | RING (16.84-MM THK) | ||
| 225-5025 B | [1] | RING (16.88-MM THK) | ||
| 225-5026 B | [1] | RING (16.9-MM THK) | ||
| 225-5027 B | [1] | RING (16.94-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25520226
119-8190: AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N 1ER1-863
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
S/N 1ER1-863
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-2462 | [10] | SPRING | |
| 2. | 8U-3591 | [10] | SPACER (6.5X15X7-MM THK) | |
| 3. | 7X-2619 M | [10] | BOLT (M6X1X10-MM) | |
| 4. | 110-0878 | [10] | PIN | |
| 5. | 110-4748 | [16] | NUT | |
| 6. | 009-3819 | [1] | CONE-BEARING | |
| 7. | 110-0880 | [2] | CARRIER-DISC | |
| 8. | 110-4752 B | [4] | SHIM | |
| 9. | 110-0876 | [6] | SCREW | |
| 10. | 1G-6735 | [8] | PIN-GROOVED | |
| 11. | 110-0877 | [6] | PIN | |
| 12. | 110-4736 | [6] | RING | |
| 13. | 110-0870 | [10] | PLATE | |
| 14. | 110-0842 | [8] | DISC-FRICTION | |
| 15. | 110-4757 | [2] | RING | |
| 16. | 110-4755 | [2] | RING | |
| 17. | 110-4756 | [2] | RING | |
| 18. | 110-4758 | [2] | RING | |
| 19. | 2D-9191 | [1] | CONE-BEARING | |
| 20. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 225-5014 B | [1] | RING (16.56-MM THK) | ||
| 225-5015 B | [1] | RING (16.62-MM THK) | ||
| 225-5016 B | [1] | RING (16.64-MM THK) | ||
| 225-5017 B | [1] | RING (16.68-MM THK) | ||
| 225-5018 B | [1] | RING (16.72-MM THK) | ||
| 225-5024 B | [1] | RING (16.84-MM THK) | ||
| 225-5025 B | [1] | RING (16.88-MM THK) | ||
| 225-5026 B | [1] | RING (16.9-MM THK) | ||
| 225-5027 B | [1] | RING (16.94-MM THK) | ||
| 225-5019 B | [1] | RING (16.74-MM THK) | ||
| 225-5020 B | [1] | RING (16.76-MM THK) | ||
| 225-5021 B | [1] | RING (16.76-MM THK) | ||
| 225-5022 B | [1] | RING (16.78-MM THK) | ||
| 225-5023 B | [1] | RING (16.82-MM THK) | ||
| 21. | 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | |
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | ||
| 22. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5557 B | [1] | DISC (1.25-M THK) | ||
| 5W-5558 B | [1] | DISC (1.35-MM THK) | ||
| 5W-5559 B | [1] | DISC (1.45-MM THK) | ||
| 5W-5560 B | [1] | DISC (1.55-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 5W-5562 B | [1] | DISC (1.75-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 23. | 110-2461 M | [8] | BOLT (M16X1.5X100-MM) | |
| 24. | 110-2457 | [4] | PIN-SPRING | |
| 25. | 110-2458 | [4] | PIN-SPRING | |
| 26. | 110-2467 | [1] | SHAFT-DIFFERENTIAL | |
| 27. | 213-9783 | [6] | BEARING-ROLLER | |
| 28. | 248-1017 | [4] | WASHER-THRUST | |
| 29. | 110-0855 | [2] | GEAR-AXLE BEVEL | |
| 30. | 110-0852 | [2] | DISC-PRESSURE | |
| 31. | 110-0854 | [8] | DISC-FRICTION | |
| 32. | 110-0853 | [10] | PLATE | |
| 33. | 253-9741 | [1] | CASE-DIFFERENTIAL | |
| 34. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 35. | 213-9759 | [4] | GEAR-BEVEL | |
| 36. | 193-1132 | [6] | GEAR-PLANETARY | |
| 37. | 190-8590 | [12] | RING-SNAP | |
| 38. | 110-0867 | [1] | HOUSING-AXLE DRIVE | |
| 39. | 110-0883 | [2] | HOUSING-BRAKE | |
| 40. | 190-8567 B | [1] | SHIM (1-MM THK) | |
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 110-0124 B | [1] | SHIM (2-MM THK) | ||
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 193-1125 B | [1] | SHIM (0.1-MM THK)(0.1MM THK) | ||
| 193-1127 B | [1] | SHIM (0.15-MM THK) | ||
| 193-1128 B | [1] | WASHER (0.1-MM THK) | ||
| 193-1129 B | [1] | WASHER (0.15-MM THK) | ||
| 193-1130 B | [1] | WASHER (0.5-MM THK) | ||
| 41. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 110-4746 | [1] | SEAL | |
| 43. | 110-0856 | [1] | CAP-PROTECTION | |
| 44. | 113-5988 | [1] | FLANGE | |
| 45. | 110-4791 | [1] | HOUSING-AXLE | |
| 46. | 110-4749 | [2] | PLUG | |
| 47. | 110-2463 | [1] | BEARING-ROLLER | |
| 48. | 110-0180 B | [2] | WASHER (90X99.8X0.3-MM THK) | |
| 6T-8671 B | [2] | SHIM (0.8-MM THK) | ||
| 6T-8672 B | [2] | SHIM (0.7-MM THK) | ||
| 6T-8673 B | [2] | SHIM (0.6-MM THK) | ||
| 6T-8674 B | [2] | SHIM (0.5-MM THK) | ||
| 6T-8675 B | [2] | SHIM (0.4-MM THK) | ||
| 110-0167 B | [2] | WASHER (90X99.8X0.85-MM THK) | ||
| 110-0168 B | [2] | WASHER (90X99.8X0.75-MM THK) | ||
| 110-0169 B | [2] | WASHER (90X99.8X0.65-MM THK) | ||
| 110-0170 B | [2] | WASHER (0.55-MM THK) | ||
| 110-0177 B | [2] | WASHER (90X99.8X0.45-MM THK) | ||
| 110-0178 B | [2] | WASHER (90X99.8X0.35-MM THK) | ||
| 110-0181 B | [2] | RING (2-MM THK) | ||
| 110-0182 B | [2] | RING (1.95-MM THK) | ||
| 110-0183 B | [2] | RING (1.9-MM THK) | ||
| 110-0184 B | [2] | RING (1.85-MM THK) | ||
| 098-2961 B | [2] | SHIM (1.7-MM THK) | ||
| 098-2962 B | [2] | SHIM (1.8-MM THK) | ||
| 098-2959 B | [2] | SHIM (1.5-MM THK) | ||
| 098-2960 B | [2] | SHIM (1.6-MM THK) | ||
| 098-2957 B | [2] | SHIM (1.3-MM THK) | ||
| 098-2958 B | [2] | SHIM (1.4-MM THK) | ||
| 6T-8668 B | [2] | SHIM (1.2-MM THK) | ||
| 6T-8669 B | [2] | SHIM (1.1-MM THK) | ||
| 6T-8670 B | [2] | SHIM (1-MM THK) | ||
| 110-0191 B | [2] | RING (1.25-MM THK) | ||
| 110-0192 B | [2] | RING (1.15-MM THK) | ||
| 110-0193 B | [2] | RING (1.05-MM THK) | ||
| 110-0194 B | [2] | RING (0.95-MM THK) | ||
| 110-0195 B | [2] | RING (0.9-MM THK) | ||
| 49. | 110-0875 | [2] | PISTON | |
| 50. | 110-4753 | [2] | BEARING | |
| 51. | 008-1902 | [2] | CONE-BEARING | |
| 52. | 110-4790 | [1] | HOUSING-AXLE | |
| 53. | 110-4792 | [1] | HOUSING-BRAKE (LH) | |
| 110-4793 | [1] | HOUSING-BRAKE (RH) | ||
| 54. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 55. | 110-0134 B | [1] | SHIM (0.4-MM THK) | |
| 110-0131 B | [1] | SHIM (1-MM THK) | ||
| 110-0132 B | [1] | SHIM (0.8-MM THK) | ||
| 110-0133 B | [1] | SHIM (0.6-MM THK) | ||
| B | [1] | SHIM (0.3-MM THK) | ||
| 110-0136 B | [1] | SHIM (0.2-MM THK) | ||
| 110-0126 B | [1] | SHIM (2-MM THK) | ||
| 110-0127 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0128 B | [1] | SHIM (1.6-MM THK) | ||
| 56. | 110-0859 | [2] | PIN-BEARING | |
| 57. | 096-9988 M | [8] | BOLT (M14X2X30-MM) | |
| 58. | 9R-6947 | [2] | SEAL-O-RING | |
| 59. | 9R-6952 | [2] | CAP-SEALING | |
| 60. | 110-0884 | [2] | HUB | |
| 61. | 110-0874 | [20] | BOLT-WHEEL | |
| 62. | 110-4745 | [2] | SEAL-O-RING | |
| 63. | 110-2464 | [4] | BEARING-ROLLER | |
| 64. | 110-0866 | [2] | CARRIER-PLANETARY | |
| 65. | 110-0862 | [2] | GEAR-RING | |
| 66. | 098-2996 | [4] | SEAL-O-RING | |
| 67. | 6S-3051 | [2] | CUP-BEARING | |
| 68. | 110-4737 | [6] | RING-RETAINING | |
| 69. | 4D-8648 | [2] | CUP-BEARING | |
| 70. | 110-0865 | [2] | SHAFT-SUN GEAR | |
| 71. | 009-3818 | [1] | CUP-BEARING | |
| 72. | 110-0846 | [2] | RING-RETAINING | |
| 73. | 2D-9190 | [1] | CUP-BEARING | |
| 74. | 110-0863 | [2] | WASHER-THRUST | |
| 75. | 110-0844 | [2] | WASHER-THRUST | |
| 76. | 110-0849 | [2] | NUT-SLOTTED | |
| 77. | 110-0861 | [2] | WASHER-TAB | |
| 78. | 9R-6965 M | [4] | SCREW (M10X1.5X20-MM) | |
| 79. | 110-0851 | [2] | SEAL | |
| 80. | 110-0850 | [4] | SEAL | |
| 81. | 110-0839 | [2] | BUSHING | |
| 82. | 110-0864 | [2] | RING-RETAINING | |
| 83. | 110-2460 M | [4] | BOLT (M12X1.5X95-MM) | |
| 84. | 8T-6385 M | [32] | BOLT (M16X2X180-MM) | |
| 85. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 86. | 110-4733 | [2] | UNIVERSAL JOINT | |
| 87. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 88. | 110-0860 | [2] | PIN-BEARING | |
| 89. | 130-2703 | [1] | GEAR SET | |
| 90. | 110-0843 | [1] | WASHER (31X56X6-MM THK) | |
| 91. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 92. | 110-2456 | [4] | PIN-SPRING | |
| 93. | 110-0840 | [2] | TIE ROD | |
| 94. | 110-0871 | [1] | GUIDE | |
| 95. | 110-0847 | [1] | PLUG-SCREW | |
| 96. | 9R-6953 | [6] | SEAL-O-RING | |
| 97. | 109-4440 | [5] | PLUG | |
| 98. | 110-0841 | [1] | ROD-PISTON | |
| 99. | 110-4754 | [1] | GASKET | |
| 100. | 110-4759 | [2] | GUIDE-PISTON | |
| 101. | 110-0873 | [1] | CYLINDER | |
| 102. | 110-4742 | [2] | SEAL-O-RING | |
| 103. | 110-4739 | [12] | RING-SNAP | |
| 104. | 110-4735 | [4] | RING-GUIDE | |
| 105. | 5W-6392 | [2] | SEAL-O-RING | |
| 106. | 5W-6391 | [2] | SCRAPER | |
| 107. | 110-0872 | [1] | GUIDE | |
| 108. | 110-2459 M | [8] | BOLT (M14X2X105-MM) | |
| 109. | 6V-2652 | [2] | CONE-BEARING | |
| 110. | 110-0858 | [2] | CAP-SEALING | |
| 111. | 110-4743 | [2] | SEAL-O-RING | |
| 112. | 9R-3171 | [4] | FITTING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25520227
114-0166: AXLE GP-REAR
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5837 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 2. | 9R-5219 | [8] | BOLT-SPECIAL | |
| 3. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 4. | 118-5839 | [2] | SEAL-REAR AXLE | |
| 5. | 030-1957 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 6. | 115-2137 | [1] | HOUSING AS (LH) | |
| 7. | 115-2138 | [1] | HOUSING AS | |
| (EACH INCLUDES) | ||||
| 8. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 9. | 9R-2412 | [2] | STUD | |
| 10. | 8S-9151 | [1] | CUP-BEARING | |
| 11. | 9R-2414 | [1] | GEAR (56-TEETH) | |
| 12. | 9R-9406 | [1] | HOUSING-REAR BRAKE | |
| 13. | 9X-8880 | [25] | BOLT (5/8-11X2-IN) | |
| 14. | 9X-8883 | [1] | BOLT (5/8-11X2.75-IN) | |
| 15. | 153-3194 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 16. | 7T-6652 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 17. | 9R-2421 | [3] | SHAFT | |
| 18. | 9R-2419 | [3] | KIT-BEARING | |
| 19. | 9R-2418 | [6] | WASHER (32.94X57.21X0.78-MM THK) | |
| 20. | 9R-2417 | [3] | WASHER (33.07X48.38X1.06-MM THK) | |
| 21. | 153-3192 | [3] | GEAR-PLANETARY (20 TEETH) | |
| 22. | 9R-2420 | [1] | RETAINER | |
| 23. | 9R-2435 B | [2] | SPACER (22.86X53.85X1.25-MM THK) | |
| 9R-2436 B | [2] | SPACER (22.86X53.85X1.35-MM THK) | ||
| 9R-2437 B | [2] | SPACER (22.86X53.85X1.45-MM THK) | ||
| 9R-2438 B | [2] | SPACER (22.86X53.85X1.55-MM THK) | ||
| 9R-2439 B | [2] | SPACER (22.86X53.85X1.65-MM THK) | ||
| 9R-2440 B | [2] | SPACER (22.86X53.85X1.75-MM THK) | ||
| 9R-2441 B | [2] | SPACER (22.86X53.85X1.85-MM THK) | ||
| 9R-2442 B | [2] | SPACER (22.86X53.85X1.96-MM THK) | ||
| 9R-2443 B | [2] | SPACER (22.86X53.85X2.06-MM THK) | ||
| 9R-2444 B | [2] | SPACER (22.86X53.85X2.16-MM THK) | ||
| 9R-2445 B | [2] | SPACER (22.86X53.85X2.26-MM THK) | ||
| 24. | 9R-2505 | [1] | SEAL | |
| 25. | 9R-2504 | [1] | SHAFT | |
| 26. | 9R-2506 | [1] | FORK | |
| 27. | 9R-2507 M | [1] | SCREW-SPECIAL | |
| 28. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 29. | 9R-2495 | [2] | SEAL | |
| 30. | 3J-9196 | [4] | NUT-JAM (1/2-20-THD) | |
| 31. | 9R-2425 | [2] | WASHER (23.088X69.6X9.52-MM THK) | |
| 32. | 9R-2466 M | [2] | BOLT (7/8-14X2.2-IN) | |
| 33. | 9R-2426 | [2] | LOCK | |
| 34. | 9R-2424 | [2] | GEAR (16-TEETH) | |
| 35. | 9R-9405 | [1] | HOUSING-REAR BRAKE (RH) | |
| 36. | 133-7234 | [8] | DISC-FRICTION | |
| 37. | 9R-9401 | [8] | PLATE | |
| 38. | 9R-2474 | [2] | PIN | |
| 39. | 055-1258 | [1] | HOUSING-BRAKE (RH) | |
| 40. | 055-1259 | [1] | HOUSING-BRAKE | |
| 41. | 9R-2427 B | [1] | SHIM (0.965-MM THK) | |
| 9R-2428 B | [1] | SHIM (1.118-MM THK) | ||
| 9R-2429 B | [1] | SHIM (1.27-MM THK) | ||
| 9R-2430 B | [1] | SHIM (1.422-MM THK) | ||
| 9R-2431 B | [1] | SHIM (1.575-MM THK) | ||
| 9R-2432 B | [1] | SHIM (1.727-MM THK) | ||
| 9R-2433 B | [1] | SHIM (1.88-MM THK) | ||
| 9R-2434 B | [1] | SHIM (2.032-MM THK) | ||
| 42. | 2B-2006 | [12] | BOLT (1/2-13X4.75-IN) | |
| 43. | 9R-9398 | [2] | MANIFOLD-BRAKE TUBE | |
| 44. | 8H-1607 | [2] | SEAL-O-RING | |
| 45. | 5L-9018 | [4] | BOLT-SOCKET HEAD (1/4-20X1.75-IN) | |
| 46. | 8M-8157 | [4] | SEAL-O-RING | |
| 47. | 8T-6760 | [2] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
| 48. | 9R-9410 | [2] | SEAL-REAR BRAKE | |
| 49. | 9R-9408 | [2] | PISTON-REAR BRAKE | |
| 50. | 9R-9409 | [2] | SEAL-REAR BRAKE | |
| 51. | 9R-0823 | [1] | LEVER AS | |
| 52. | 9R-0883 | [1] | PIN | |
| 53. | 9R-2493 | [1] | RING | |
| 54. | 9R-2492 | [1] | WASHER (64.389X78.74X3.124-MM THK) | |
| 55. | 9R-2482 | [1] | COUPLING | |
| 56. | 9R-2486 | [1] | SPRING | |
| 57. | 9R-2483 | [1] | ADAPTER | |
| 58. | 2S-0480 | [1] | CUP-TAPERED ROLLER | |
| 59. | 2S-0479 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 60. | 9R-2485 | [8] | BOLT (1/2-13X2.87-IN) | |
| 61. | 9R-2480 | [1] | CASE AS | |
| 9R-2485 | [1] | BOLT (1/2-13X2.87-IN) | ||
| 62. | 9R-2484 | [2] | BUSHING-TERMINAL | |
| 63. | 9R-2490 | [2] | WASHER (76.2X101.6X1.524-MM THK) | |
| 64. | 9R-2488 | [1] | GEAR (16-TEETH) | |
| 65. | 9R-2491 | [1] | SPIDER | |
| 66. | 9R-9403 | [4] | PINION | |
| 67. | 9R-2489 | [4] | WASHER-SPRING | |
| 68. | 9R-2487 | [1] | GEAR (16-TEETH) | |
| 69. | 118-9117 | [1] | GEAR SET | |
| 70. | 5L-9656 | [1] | CONE-BEARING (TAPERED ROLLER)(BEARING) | |
| 71. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 72. | 9R-2446 B | [1] | SPACER (45.86X50.98X31.858-MM THK) | |
| 9R-2447 B | [1] | SPACER (45.86X50.98X31.908-MM THK) | ||
| 9R-2448 B | [1] | SPACER (45.86X50.98X31.959-MM THK) | ||
| 9R-2449 B | [1] | SPACER (45.86X50.98X32.01-MM THK) | ||
| 9R-2450 B | [1] | SPACER (45.86X50.98X32.061-MM THK) | ||
| 9R-2451 B | [1] | SPACER (45.86X50.98X32.112-MM THK) | ||
| 9R-2452 B | [1] | SPACER (45.86X50.98X32.162-MM THK) | ||
| 9R-2453 B | [1] | SPACER (45.86X50.98X32.213-MM THK) | ||
| 9R-2454 B | [1] | SPACER (45.86X50.98X32.264-MM THK) | ||
| 9R-2455 B | [1] | SPACER (45.86X50.98X32.315-MM THK) | ||
| 9R-2456 B | [1] | SPACER (45.86X50.98X32.366-MM THK) | ||
| 9R-2457 B | [1] | SPACER (45.86X50.98X32.416-MM THK) | ||
| 9R-2458 B | [1] | SPACER (45.86X50.98X32.467-MM THK) | ||
| 9R-2459 B | [1] | SPACER (45.86X50.98X32.518-MM THK) | ||
| 9R-2460 B | [1] | SPACER (45.86X50.98X32.569-MM THK) | ||
| 73. | 9R-6671 M | [12] | BOLT (1/2-20X1.62-IN) | |
| 74. | 0T-0318 | [2] | BOLT (7/16-14X1-IN) | |
| 75. | 9R-2502 | [1] | NUT (1-1/4-18-THD) | |
| 76. | 9R-9404 | [1] | BLOCK | |
| 77. | 2M-2570 | [12] | LOCKNUT (1/2-20-THD) | |
| 78. | 9R-6602 | [2] | PLUG-MAGNETIC | |
| 79. | 9R-2508 | [1] | HOUSING | |
| 80. | 3B-5302 | [1] | PIN-COTTER | |
| 81. | 9R-2494 | [1] | RING | |
| 82. | 7T-7621 | [1] | BEARING AS | |
| 83. | 7T-6654 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 84. | 9R-2512 | [1] | SEAL | |
| 85. | 9R-2407 | [1] | RETAINER AS | |
| 86. | 4K-5843 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 87. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 88. | 3B-4509 | [6] | LOCKWASHER | |
| 89. | 3K-3379 | [6] | BOLT (9/16-12X1-IN) | |
| 90. | 7T-6653 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 91. | 9R-2496 | [1] | SEAL | |
| 92. | 9R-2499 | [1] | SEAL AS | |
| 93. | 9R-2498 | [1] | RETAINER | |
| 94. | 113-1147 | [1] | FLANGE | |
| 95. | 9R-2497 | [1] | SEAL | |
| 96. | 9R-2501 | [1] | WASHER (32.5X60.5X5.6-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25520228
156-2853: AXLE GP-REAR
156-2853 AXLE GP-REAR
S/N 7WN1-938
RATIO 20.8
PART OF 107-3716 AXLE & MTG GP-REAR
AN ATTACHMENT
S/N 7WN1-938
RATIO 20.8
PART OF 107-3716 AXLE & MTG GP-REAR
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5837 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 1A. | 9R-5219 | [8] | BOLT-SPECIAL | |
| 2. | 9R-2407 | [1] | RETAINER AS | |
| 2A. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 2B. | 4K-5843 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 156-1928 | [1] | HOUSING AS (LH) | |
| 3A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3B. | 8S-9151 | [1] | CUP-BEARING | |
| 3C. | [2] | STUD | ||
| 3D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 4. | [1] | HOUSING AS | ||
| 4A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4B. | 8S-9151 | [1] | CUP-BEARING | |
| 4C. | [2] | STUD | ||
| 4D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 5. | 186-4117 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 5A. | 7T-6652 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 5B. | 9R-2417 | [3] | WASHER (33.07X48.38X1.06-MM THK) | |
| 5C. | 9R-2418 | [6] | WASHER (32.94X57.21X0.78-MM THK) | |
| 5D. | 9R-2419 | [3] | KIT-BEARING | |
| 5E. | 9R-2420 | [1] | RETAINER | |
| 5F. | 9R-2421 | [3] | SHAFT | |
| 5G. | 186-4118 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 6. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 7. | 9R-0883 | [1] | PIN | |
| 8. | 9R-0823 | [1] | LEVER AS | |
| 9. | 9R-2427 B | [1] | SHIM (0.965-MM THK) | |
| 9R-2428 B | [1] | SHIM (1.118-MM THK) | ||
| 9R-2429 B | [1] | SHIM (1.27-MM THK) | ||
| 9R-2430 B | [1] | SHIM (1.422-MM THK) | ||
| 9R-2431 B | [1] | SHIM (1.575-MM THK) | ||
| 9R-2432 B | [1] | SHIM (1.727-MM THK) | ||
| 9R-2433 B | [1] | SHIM (1.88-MM THK) | ||
| 9R-2434 B | [1] | SHIM (2.032-MM THK) | ||
| 10. | 9R-2425 | [2] | WASHER (23.088X69.6X9.52-MM THK) | |
| 11. | 156-2572 | [1] | HOUSING-REAR BRAKE (RH)(RH) | |
| 12. | 9R-9410 | [2] | SEAL-REAR BRAKE | |
| 13. | 9R-9409 | [2] | SEAL-REAR BRAKE | |
| 14. | 9R-9408 | [2] | PISTON-REAR BRAKE | |
| 15. | 9R-2446 B | [1] | SPACER (45.86X50.98X31.858-MM THK) | |
| 9R-2447 B | [1] | SPACER (45.86X50.98X31.908-MM THK) | ||
| 9R-2448 B | [1] | SPACER (45.86X50.98X31.959-MM THK) | ||
| 9R-2449 B | [1] | SPACER (45.86X50.98X32.01-MM THK) | ||
| 9R-2450 B | [1] | SPACER (45.86X50.98X32.061-MM THK) | ||
| 9R-2451 B | [1] | SPACER (45.86X50.98X32.112-MM THK) | ||
| 9R-2452 B | [1] | SPACER (45.86X50.98X32.162-MM THK) | ||
| 9R-2453 B | [1] | SPACER (45.86X50.98X32.213-MM THK) | ||
| 9R-2454 B | [1] | SPACER (45.86X50.98X32.264-MM THK) | ||
| 9R-2455 B | [1] | SPACER (45.86X50.98X32.315-MM THK) | ||
| 9R-2456 B | [1] | SPACER (45.86X50.98X32.366-MM THK) | ||
| 9R-2457 B | [1] | SPACER (45.86X50.98X32.416-MM THK) | ||
| 9R-2458 B | [1] | SPACER (45.86X50.98X32.467-MM THK) | ||
| 9R-2459 B | [1] | SPACER (45.86X50.98X32.518-MM THK) | ||
| 9R-2460 B | [1] | SPACER (45.86X50.98X32.569-MM THK) | ||
| 16. | 230-4017 | [8] | DISC-BRAKE | |
| 17. | 9R-2474 | [2] | PIN | |
| 18. | 9R-9401 | [8] | PLATE | |
| 19. | 8S-4740 | [12] | BOLT (9/16-12X5-IN) | |
| 20. | 9R-9398 | [2] | MANIFOLD-BRAKE TUBE | |
| 21. | 8H-1607 | [2] | SEAL-O-RING | |
| 22. | 9R-2424 | [2] | GEAR (16-TEETH) | |
| 23. | 8M-8157 | [4] | SEAL-O-RING | |
| 24. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 25. | 5L-9656 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 26. | 9X-8880 | [25] | BOLT (5/8-11X2-IN) | |
| 27. | 9R-2508 | [1] | HOUSING | |
| 28. | 113-1147 | [1] | FLANGE | |
| 29. | 9R-2497 | [1] | SEAL | |
| 30. | 9R-2501 | [1] | WASHER (32.5X60.5X5.6-MM THK) | |
| 31. | 9R-2502 | [1] | NUT (1-1/4-18-THD) | |
| 32. | 3B-5302 | [1] | PIN-COTTER | |
| 33. | 9R-2498 | [1] | RETAINER | |
| 34. | 3B-4509 | [6] | LOCKWASHER | |
| 35. | 3K-3379 | [6] | BOLT (9/16-12X1-IN) | |
| 36. | 9X-8883 | [1] | BOLT (5/8-11X2.75-IN) | |
| 37. | 5L-9018 | [4] | BOLT-SOCKET HEAD (1/4-20X1.75-IN) | |
| 38. | 8T-6760 | [2] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
| 39. | 9R-2499 | [1] | SEAL AS | |
| 40. | 9R-2496 | [1] | SEAL | |
| 41. | 7T-6653 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 118-5839 | [2] | SEAL-REAR AXLE | |
| 43. | 9R-2512 | [1] | SEAL | |
| 44. | 030-1957 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 45. | 7T-6654 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 46. | 9R-2505 | [1] | SEAL | |
| 47. | 9R-2504 | [1] | SHAFT | |
| 48. | 9R-2507 M | [1] | SCREW-SPECIAL | |
| 49. | 7T-7621 | [1] | BEARING AS | |
| 50. | 9R-2494 | [1] | RING | |
| 51. | 9R-2480 | [1] | CASE AS | |
| 52. | 2S-0480 | [1] | CUP-TAPERED ROLLER | |
| 53. | 2S-0479 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 54. | 9R-2506 | [1] | FORK | |
| 55. | 9R-2492 | [1] | WASHER (64.389X78.74X3.124-MM THK) | |
| 56. | 9R-2493 | [1] | RING | |
| 57. | 9R-2488 | [1] | GEAR (16-TEETH) | |
| 58. | 9R-2482 | [1] | COUPLING | |
| 59. | 278-0223 | [1] | HOUSING-BRAKE (WITHOUT DIFFERENTIAL LOCK) | |
| 60. | 9R-2486 | [1] | SPRING | |
| 61. | 9R-2483 | [1] | ADAPTER | |
| 62. | 9R-2484 | [2] | BUSHING-TERMINAL | |
| 63. | 9R-2490 | [2] | WASHER (76.2X101.6X1.524-MM THK) | |
| 64. | 9R-2491 | [1] | SPIDER | |
| 65. | 9R-9403 | [4] | PINION | |
| 66. | 9R-2489 | [4] | WASHER-SPRING | |
| 67. | 9R-2485 | [8] | BOLT (1/2-13X2.87-IN) | |
| 68. | 9R-2495 | [2] | SEAL | |
| 69. | 9R-5241 | [1] | GEAR SET | |
| 70. | 9R-6671 M | [12] | BOLT (1/2-20X1.62-IN) | |
| 71. | 2M-2570 | [12] | LOCKNUT (1/2-20-THD) | |
| 72. | 9R-2503 | [1] | BLOCK | |
| 73. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 74. | 0T-0318 | [2] | BOLT (7/16-14X1-IN) | |
| 75. | 9R-2487 | [1] | GEAR (16-TEETH) | |
| 76. | 9R-2435 B | [2] | SPACER (22.86X53.85X1.25-MM THK) | |
| 9R-2436 B | [2] | SPACER (22.86X53.85X1.35-MM THK) | ||
| 9R-2437 B | [2] | SPACER (22.86X53.85X1.45-MM THK) | ||
| 9R-2438 B | [2] | SPACER (22.86X53.85X1.55-MM THK) | ||
| 9R-2439 B | [2] | SPACER (22.86X53.85X1.65-MM THK) | ||
| 9R-2440 B | [2] | SPACER (22.86X53.85X1.75-MM THK) | ||
| 9R-2441 B | [2] | SPACER (22.86X53.85X1.85-MM THK) | ||
| 9R-2442 B | [2] | SPACER (22.86X53.85X1.96-MM THK) | ||
| 9R-2443 B | [2] | SPACER (22.86X53.85X2.06-MM THK) | ||
| 9R-2444 B | [2] | SPACER (22.86X53.85X2.16-MM THK) | ||
| 9R-2445 B | [2] | SPACER (22.86X53.85X2.26-MM THK) | ||
| 77. | 9R-6602 | [2] | PLUG-MAGNETIC | |
| 78. | 5P-0540 | [4] | NUT-HEX FULL (9/16-18-THD) | |
| 79. | 278-0224 | [1] | HOUSING-BRAKE (WITH DIFFERENTIAL LOCK) | |
| 80. | 156-1933 | [1] | HOUSING-REAR BRAKE (LH)(LH) | |
| 81. | 9R-2426 | [2] | LOCK | |
| 82. | 9R-2466 M | [2] | BOLT (7/8-14X2.2-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25520229
156-2857: AXLE GP-REAR
156-2857 AXLE GP-REAR
S/N 7WN1-938
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
S/N 7WN1-938
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
For full view, you need register
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5837 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 1A. | 9R-5219 | [8] | BOLT-SPECIAL | |
| 2. | 9R-2407 | [1] | RETAINER AS | |
| 2A. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 2B. | 4K-5843 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 156-1928 | [1] | HOUSING AS (LH) | |
| 3A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3B. | 8S-9151 | [1] | CUP-BEARING | |
| 3C. | [2] | STUD | ||
| 3D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 4. | [1] | HOUSING AS | ||
| 4A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4B. | 8S-9151 | [1] | CUP-BEARING | |
| 4C. | [2] | STUD | ||
| 4D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 5. | 186-4117 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 5A. | 7T-6652 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 5B. | 9R-2417 | [3] | WASHER (33.07X48.38X1.06-MM THK) | |
| 5C. | 9R-2418 | [6] | WASHER (32.94X57.21X0.78-MM THK) | |
| 5D. | 9R-2419 | [3] | KIT-BEARING | |
| 5E. | 9R-2420 | [1] | RETAINER | |
| 5F. | 9R-2421 | [3] | SHAFT | |
| 5G. | 186-4118 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 6. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 7. | 9R-0883 | [1] | PIN | |
| 8. | 9R-0823 | [1] | LEVER AS | |
| 9. | 9R-2427 B | [1] | SHIM (0.965-MM THK) | |
| 9R-2428 B | [1] | SHIM (1.118-MM THK) | ||
| 9R-2429 B | [1] | SHIM (1.27-MM THK) | ||
| 9R-2430 B | [1] | SHIM (1.422-MM THK) | ||
| 9R-2431 B | [1] | SHIM (1.575-MM THK) | ||
| 9R-2432 B | [1] | SHIM (1.727-MM THK) | ||
| 9R-2433 B | [1] | SHIM (1.88-MM THK) | ||
| 9R-2434 B | [1] | SHIM (2.032-MM THK) | ||
| 10. | 9R-2425 | [2] | WASHER (23.088X69.6X9.52-MM THK) | |
| 11. | 156-2572 | [1] | HOUSING-REAR BRAKE (RH) | |
| 12. | 9R-9410 | [2] | SEAL-REAR BRAKE | |
| 13. | 9R-9409 | [2] | SEAL-REAR BRAKE | |
| 14. | 9R-9408 | [2] | PISTON-REAR BRAKE | |
| 15. | 9R-2446 B | [1] | SPACER (45.86X50.98X31.858-MM THK) | |
| 9R-2447 B | [1] | SPACER (45.86X50.98X31.908-MM THK) | ||
| 9R-2448 B | [1] | SPACER (45.86X50.98X31.959-MM THK) | ||
| 9R-2449 B | [1] | SPACER (45.86X50.98X32.01-MM THK) | ||
| 9R-2450 B | [1] | SPACER (45.86X50.98X32.061-MM THK) | ||
| 9R-2451 B | [1] | SPACER (45.86X50.98X32.112-MM THK) | ||
| 9R-2452 B | [1] | SPACER (45.86X50.98X32.162-MM THK) | ||
| 9R-2453 B | [1] | SPACER (45.86X50.98X32.213-MM THK) | ||
| 9R-2454 B | [1] | SPACER (45.86X50.98X32.264-MM THK) | ||
| 9R-2455 B | [1] | SPACER (45.86X50.98X32.315-MM THK) | ||
| 9R-2456 B | [1] | SPACER (45.86X50.98X32.366-MM THK) | ||
| 9R-2457 B | [1] | SPACER (45.86X50.98X32.416-MM THK) | ||
| 9R-2458 B | [1] | SPACER (45.86X50.98X32.467-MM THK) | ||
| 9R-2459 B | [1] | SPACER (45.86X50.98X32.518-MM THK) | ||
| 9R-2460 B | [1] | SPACER (45.86X50.98X32.569-MM THK) | ||
| 16. | 230-4017 | [8] | DISC-BRAKE | |
| 17. | 9R-2474 | [2] | PIN | |
| 18. | 9R-9401 | [8] | PLATE | |
| 19. | 8S-4740 | [12] | BOLT (9/16-12X5-IN) | |
| 20. | 9R-9398 | [2] | MANIFOLD-BRAKE TUBE | |
| 21. | 8H-1607 | [2] | SEAL-O-RING | |
| 22. | 9R-2424 | [2] | GEAR (16-TEETH) | |
| 23. | 8M-8157 | [4] | SEAL-O-RING | |
| 24. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 25. | 5L-9656 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 26. | 9X-8880 | [25] | BOLT (5/8-11X2-IN) | |
| 27. | 9R-2508 | [1] | HOUSING | |
| 28. | 113-1147 | [1] | FLANGE | |
| 29. | 9R-2497 | [1] | SEAL | |
| 30. | 9R-2501 | [1] | WASHER (32.5X60.5X5.6-MM THK) | |
| 31. | 9R-2502 | [1] | NUT (1-1/4-18-THD) | |
| 32. | 3B-5302 | [1] | PIN-COTTER | |
| 33. | 9R-2498 | [1] | RETAINER | |
| 34. | 3B-4509 | [6] | LOCKWASHER | |
| 35. | 3K-3379 | [6] | BOLT (9/16-12X1-IN) | |
| 36. | 9X-8883 | [1] | BOLT (5/8-11X2.75-IN) | |
| 37. | 5L-9018 | [4] | BOLT-SOCKET HEAD (1/4-20X1.75-IN) | |
| 38. | 8T-6760 | [2] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
| 39. | 9R-2499 | [1] | SEAL AS | |
| 40. | 9R-2496 | [1] | SEAL | |
| 41. | 7T-6653 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 118-5839 | [2] | SEAL-REAR AXLE | |
| 43. | 9R-2512 | [1] | SEAL | |
| 44. | 030-1957 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 45. | 7T-6654 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 46. | 9R-2505 | [1] | SEAL | |
| 47. | 9R-2504 | [1] | SHAFT | |
| 48. | 9R-2507 M | [1] | SCREW-SPECIAL | |
| 49. | 7T-7621 | [1] | BEARING AS | |
| 50. | 9R-2494 | [1] | RING | |
| 51. | 9R-2480 | [1] | CASE AS | |
| 52. | 2S-0480 | [1] | CUP-TAPERED ROLLER | |
| 53. | 2S-0479 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 54. | 9R-2506 | [1] | FORK | |
| 55. | 9R-2492 | [1] | WASHER (64.389X78.74X3.124-MM THK) | |
| 56. | 9R-2493 | [1] | RING | |
| 57. | 9R-2488 | [1] | GEAR (16-TEETH) | |
| 58. | 9R-2482 | [1] | COUPLING | |
| 59. | 282-9821 | [1] | HOUSING-BRAKE (LH) | |
| 60. | 9R-2486 | [1] | SPRING | |
| 61. | 9R-2483 | [1] | ADAPTER | |
| 62. | 9R-2484 | [2] | BUSHING-TERMINAL | |
| 63. | 9R-2490 | [2] | WASHER (76.2X101.6X1.524-MM THK) | |
| 64. | 9R-2491 | [1] | SPIDER | |
| 65. | 9R-9403 | [4] | PINION | |
| 66. | 9R-2489 | [4] | WASHER-SPRING | |
| 67. | 9R-2485 | [8] | BOLT (1/2-13X2.87-IN) | |
| 68. | 9R-2495 | [2] | SEAL | |
| 69. | 118-9117 | [1] | GEAR SET | |
| 70. | 9R-6671 M | [12] | BOLT (1/2-20X1.62-IN) | |
| 71. | 2M-2570 | [12] | LOCKNUT (1/2-20-THD) | |
| 72. | 9R-2503 | [1] | BLOCK | |
| 73. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 74. | 0T-0318 | [2] | BOLT (7/16-14X1-IN) | |
| 75. | 9R-2487 | [1] | GEAR (16-TEETH) | |
| 76. | 9R-2435 B | [2] | SPACER (22.86X53.85X1.25-MM THK) | |
| 9R-2436 B | [2] | SPACER (22.86X53.85X1.35-MM THK) | ||
| 9R-2437 B | [2] | SPACER (22.86X53.85X1.45-MM THK) | ||
| 9R-2438 B | [2] | SPACER (22.86X53.85X1.55-MM THK) | ||
| 9R-2439 B | [2] | SPACER (22.86X53.85X1.65-MM THK) | ||
| 9R-2440 B | [2] | SPACER (22.86X53.85X1.75-MM THK) | ||
| 9R-2441 B | [2] | SPACER (22.86X53.85X1.85-MM THK) | ||
| 9R-2442 B | [2] | SPACER (22.86X53.85X1.96-MM THK) | ||
| 9R-2443 B | [2] | SPACER (22.86X53.85X2.06-MM THK) | ||
| 9R-2444 B | [2] | SPACER (22.86X53.85X2.16-MM THK) | ||
| 9R-2445 B | [2] | SPACER (22.86X53.85X2.26-MM THK) | ||
| 77. | 9R-6602 | [2] | PLUG-MAGNETIC | |
| 78. | 5P-0540 | [4] | NUT-HEX FULL (9/16-18-THD) | |
| 79. | 282-9822 | [1] | HOUSING-BRAKE (RH) | |
| 80. | 156-1933 | [1] | HOUSING-REAR BRAKE (LH) | |
| 81. | 9R-2426 | [2] | LOCK | |
| 82. | 9R-2466 M | [2] | BOLT (7/8-14X2.2-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
Information:
POWER TRAIN
AXLE GP
Operation and Maintenance Manual
Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Technical Information Bulletin
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
Specifications
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Systems Operation
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
