AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

135-4552 WIRING GP-MACHINE S/N 4YS189-2470 PART OF 126-9527 CHASSIS AR 938G WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 938G WHEEL LOADER 4YS
 938G Wheel Loader 4YS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2566 938G 4YS   (1997)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
 

#SEBP25660300
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 4YS189-2470
PART OF 126-9527 CHASSIS AR
i01110295 SEBP2566
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 7K-1181 [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 171-4405 C [1] HARNESS AS-CHASSIS  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1535 [1] BELL AS-END  
  3S-2093 [5] STRAP-CABLE  
  7K-1181 [3] STRAP-CABLE  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660301
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 4YS2471-UP
PART OF 126-9527 CHASSIS AR
i01684634 SEBP2566
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 7K-1181 [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 214-6405 C [1] HARNESS AS-CHASSIS  
  3E-3369 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1535 [1] BELL AS-END  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660302
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 4YS1-1994
PART OF 135-2507 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i00509357 SEBP2566
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [5] LOCKWASHER  
2. 3E-6329 BY [1] ALARM GP (ACTION)  
3. 7K-1181 [16] STRAP-CABLE  
4. 8T-8737 [26] PLUG-SEAL (3.07MM ODX14.6MM OAL)  
5. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
6. 107-6065 B [1] SWITCH GP-LAMP TEST  
7. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 109-2356 B [3] PLUG (SWITCH)  
9. 110-6109 [1] KNOB-CONTROL  
10. 111-0155 [1] PLATE AS (LH)  
11. 111-0156 [1] PLATE AS (RH)  
12. 111-0161 [5] HOUSING  
13. 111-7873 [1] HARNESS AS-CAB  
14. 111-7899 B [3] GASKET  
15. 112-4735 [1] CONTROL GP-DIODE BLOCK  
16. 114-3947 [5] PLATE  
17. 115-1748 [10] LAMP (24-VOLT, 3-WATT)  
18. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
19. 118-7241 [1] FILM-INSTRUCTION (DASH, RH)(RH DUCT)  
20. 135-2603 [1] FILM-PANEL (LH DUCT)  
21. 173-9190 [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)  
22. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
23. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
24. 102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
25. 4P-7581 [1] CLIP (LADDER)  
26. 4P-8134 [3] CLIP (LADDER)(TIE WRAP)  
27. 5C-8312 M [5] NUT (M4X0.7-THD)  
28. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660303
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 4YS1995-UP
PART OF 135-2507 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i01506440 SEBP2566
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [15] STRAP-CABLE  
2. 8T-8737 C [26] PLUG-SEAL  
3. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
4. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
    (RUNNING/FLOOD/PANEL/TAIL LIGHTS)
5. 109-2356 BC [4] PLUG  
6. 110-6109 [1] KNOB-CONTROL  
7. 111-7899 BC [4] GASKET  
8. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
9. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
  111-7899 [1] GASKET  
10. 148-0642 CY [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
11. 156-7183 C [1] PLATE AS (LH)  
12. 156-7184 C [1] PLATE AS (RH)  
13. 157-1997 C [4] SPACER (4.34X15.88X6.34-MM THK)  
14. 172-2309 C [1] HARNESS AS-CAB  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
15. 198-5177 C [1] FILM-PANEL (DUCT, LH)  
16. 200-1889 C [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [13] PLUG-SEAL  
  5P-6271 [1] CONNECTOR AS  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
17. 201-2674 C [1] FILM-PANEL  
18. 202-9749 CY [1] MODULE GP-WARNING INDICATOR  
19. 1P-7326 C [4] WASHER (4.32X9.52X1.52-MM THK)  
20. 102-8804 C [1] KIT-RECEPTACLE (4-PIN)  
21. 102-8805 C [1] KIT-RECEPTACLE (6-PIN)  
22. 102-8806 C [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 8T-2659 CM [4] LOCKNUT (M4X0.7-THD)  
26. 8T-4121 C [1] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 CM [1] NUT (M10X1.5-THD)  
28. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660304
 

137-6838: WIRING GP-RELAY PANEL

137-6838 WIRING GP-RELAY PANEL
S/N 4YS1-UP
PART OF 135-4552 WIRING GP-MACHINE
i00508492 SEBP2566
1376838 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-2612 [1] RELAY AS (24-VOLT)(TILT HOOD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 4B-2043 [4] NUT (8-32-THD)  
3. 5H-6565 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5M-6668 [4] SCREW-MACHINE (8-32X0.75-IN)  
5. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
6. 7V-9275 [1] STRAP  
7. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
8. 106-3226 [1] BOX AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9R-2821 M [4] BOSS (M10X1.5X15-MM)  
9. 125-1302 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
10. 136-3307 [1] PLATE AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 141-4747 [1] PLATE-IDENTIFICATION (MAIN POWER BREAKER)  
13. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 5C-9553 M [4] BOLT (M6X1X16-MM)  
16. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
17. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
19. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
  M   METRIC PART
 

#SEBP25660305
 

143-2469: WIRING GP-SECONDARY STEERING

143-2469 WIRING GP-SECONDARY STEERING
S/N 4YS1-UP
PART OF 143-2462 STEERING AR-SECONDARY
AN ATTACHMENT
i00583838 SEBP2566
1432469 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-7080 [1] CABLE AS  
2. 113-8445 [1] CABLE AS  
3. 115-3069 [2] CLIP AS-CONNECTING (3-PIN)  
4. 116-4491 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 118-5597 [1] DIODE AS  
6. 139-2599 [1] RELAY  
7. 140-6094 [1] CABLE AS  
8. 140-6308 [1] CABLE AS  
9. 140-6309 [1] CABLE AS  
10. 143-2470 [1] HARNESS AS-STEERING (SECONDARY)  
  102-8808 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
11. 145-1015 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
12. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3K-0360 [2] SEAL-O-RING  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 4P-7581 [1] CLIP (LADDER)  
16. 4S-1962 [1] CLIP (LOOP)  
17. 5C-7261 M [1] NUT (M8X1.25-THD)  
18. 5C-8312 M [2] NUT (M4X0.7-THD)  
19. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
20. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 6V-8188 [6] NUT (1/2-13-THD)  
22. 7F-0560 [6] WASHER (0.516X0.938X0.101-IN THK)  
23. 7X-2552 M [2] BOLT (M16X2X30-MM)  
24. 8C-6358 [1] BLOCK AS-JUNCTION (BATTERY)  
  1D-5117 [3] NUT-JAM (1/2-13-THD)  
25. 8L-8413 [14] STRAP-CABLE (WHITE)  
26. 8M-2770 [6] CLIP (LOOP)  
27. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
30. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
31. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
32. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4244 M [1] NUT (M12X1.75-THD)  
36. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
38. 9M-8406 [1] CLIP (LOOP)  
39. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
40. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
 

#SEBP25660306
 

130-4730: WIRING GP-SENSOR

130-4730 WIRING GP-SENSOR
S/N 4YS1-UP
PART OF 134-8593 MONITOR AR-PAYLOAD
Type 1
AN ATTACHMENT
i00557826 SEBP2566
1304730 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4244 M [3] NUT (M12X1.75-THD)  
2. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 3S-2093 [7] STRAP-CABLE  
4. 129-8111 [1] HARNESS AS-MONITOR (PAYLOAD)  
5. 126-6872 [1] TEE  
6. 3J-1907 [2] SEAL-O-RING  
7. 6V-8397 [4] SEAL-O-RING  
8. 102-5912 I [1] HOSE AS  
9. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYL HEAD END OIL)  
10. 122-2222 [1] ADAPTER  
11. 4E-2448 [1] BRACKET  
12. 6V-8636 [1] CONNECTOR  
13. 6V-9850 [1] ELBOW  
14. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
15. 5P-9683 [1] ROD END  
16. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
17. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
18. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
19. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
20. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 4E-2250 [1] HOUSING  
22. 6S-4868 [1] LEVER  
23. 7I-3236 [1] SUPPORT AS  
24. 129-6791 [1] ROD  
25. 129-6792 [1] ARM-BAIL  
26. 8K-1253 [1] ROD END  
27. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
28. 123-7416 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
29. 6V-2313 M [1] BOLT (M5X0.8X30-MM)  
30. 4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
31. 2H-3429 [1] RING-RETAINING  
32. 9X-2480 M [3] BOLT (M6X1X45-MM)  
33. 9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
34. 8C-5607 [6] MOUNT-ISOLATION  
35. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
36. 5C-2890 M [3] NUT (M6X1-THD)  
37. 6D-3025 [2] BALL BEARING  
38. 4E-2453 [1] SHAFT  
39. 2L-6726 [2] RING-RETAINING  
40. 8T-2561 [2] WASHER-HARD (10.5X28.5X5-MM THK)  
41. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660307
 

130-4730: WIRING GP-SENSOR

130-4730 WIRING GP-SENSOR
S/N 4YS1-UP
PART OF 134-8593 MONITOR AR-PAYLOAD
Type 2
AN ATTACHMENT
i01734499 SEBP2566
1304730 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
2. 3S-2093 [6] STRAP-CABLE  
3. 4E-2448 [1] BRACKET  
4. 5P-9683 [1] ROD END  
5. 7I-3236 [1] SUPPORT AS  
6. 8C-5607 [6] MOUNT-ISOLATION  
7. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
8. 8K-1253 [1] ROD END  
9. 102-5912 I [1] HOSE AS  
10. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYL HEAD END OIL)  
11. 129-6791 [1] ROD  
12. 129-6792 [1] ARM-BAIL  
13. 129-8111 [1] HARNESS AS-MONITOR (PAYLOAD)  
14. 164-6871 [1] ADAPTER AS  
15. 166-2232 C [1] SEAL-LIP TYPE  
16. 168-0402 C [1] HOUSING  
17. 168-1968 [1] TEE AS  
18. 168-8774 C [1] SHAFT  
19. 219-2384 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
20. 148-8367 [1] ELBOW AS  
21. 155-7327 [1] CONNECTOR AS  
22. 2H-3429 [1] RING-RETAINING  
23. 2L-6726 [2] RING-RETAINING  
24. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
25. 4E-7088 [1] LEVER  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 6D-3025 [2] BALL BEARING  
28. 6V-0894 C [1] SEAL-O-RING  
29. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
30. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
31. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
32. 8T-2561 [2] WASHER-HARD (10.5X28.5X5-MM THK)  
33. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
35. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
36. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
37. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
40. 9X-2480 M [3] BOLT (M6X1X45-MM)  
41. 9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660308
 

134-8505: WIRING GP-TRACTION CONTROL

134-8505 WIRING GP-TRACTION CONTROL
S/N 4YS1-UP
PART OF 134-8501 CONTROL AR-TRACTION
Type 1
AN ATTACHMENT
i00511568 SEBP2566
1348505 WIRING GP-TRACTION CONTROL Parts scheme 1348505 WIRING GP-TRACTION CONTROL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7078 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
4. 2D-0388 [1] GROMMET (25.4-MM ID)  
5. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
6. 109-7080 [2] GUARD AS  
7. 9R-5383 [1] BOSS  
8. 9M-8406 [1] CLIP (LOOP)  
9. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
10. 7K-1181 [17] STRAP-CABLE  
11. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
15. 4E-2250 [1] HOUSING  
17. 152-7356 [1] LEVER  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6431 [2] ROD END  
20. 119-4167 [1] ROD  
21. 8T-4133 M [2] NUT (M10X1.5-THD)  
22. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
23. 6V-8211 M [3] BOLT (M6X1X55-MM)  
24. 152-3764 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
25. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 105-3769 Y [1] SENSOR GP-POSITION (ARTICULATION ANGLE)  
28. 2H-3429 [1] RING-RETAINING  
29. 6D-3025 [2] BALL BEARING  
30. 152-7205 [1] SHAFT  
31. 2L-6726 [2] RING-RETAINING  
32. 4J-9448 [3] LUG  
33. 135-4708 [1] HARNESS AS-CONTROL (TRACTION-MAIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  8T-8737 [58] PLUG-SEAL  
34. 3K-0360 [4] SEAL-O-RING  
35. 135-4705 [1] HARNESS AS-CONTROL (TRACTION-REAR AXLE)  
36. 139-6198 Y [1] SERVICE GP-MACHINE (TRACTION CONTROL SYSTEM)  
37. 109-7330 Y [4] SENSOR GP-SPEED (WHEEL SPEED)  
38. 139-8974 [1] HARNESS AS-CONTROL (TRACTION-FRONT AXLE)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
39. 6V-3265 [6] CLIP  
40. 2H-9524 [2] GROMMET  
41. 8T-5387 [2] GROMMET  
42. 109-7079 [2] GUARD AS  
43. 1S-9593 [1] STRAP-CABLE  
44. 9U-2277 [1] CLIP AS  
45. 8L-8413 [1] STRAP-CABLE (WHITE)  
46. 118-9623 [1] PLATE AS  
  6B-4284 [4] RIVET  
47. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
48. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4P-8134 [3] CLIP (LADDER)  
50. 141-7553 [1] PLUG AS  
51. 141-9817 [1] GUARD AS  
52. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
53. 8T-9655 [8] MOUNT-ISOLATION  
54. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
55. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
56. 1S-0994 [1] CLIP (LOOP)  
57. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
58. 141-7552 [1] PLUG AS (FOR IT38G ONLY)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25660309
 

134-8505: WIRING GP-TRACTION CONTROL

134-8505 WIRING GP-TRACTION CONTROL
S/N 4YS1-UP
PART OF 134-8501 CONTROL AR-TRACTION
Type 2
AN ATTACHMENT
i01164209 SEBP2566
1348505 WIRING GP-TRACTION CONTROL Parts scheme 1348505 WIRING GP-TRACTION CONTROL Parts scheme
  For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7078 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
4. 2D-0388 [1] GROMMET (25.4-MM ID)  
5. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
6. 109-7080 [2] GUARD AS  
7. 9R-5383 [1] BOSS  
8. 9M-8406 [1] CLIP (LOOP)  
9. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
10. 7K-1181 [17] STRAP-CABLE  
11. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
15. 4E-2250 [1] HOUSING  
17. 152-7356 [1] LEVER  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6431 [2] ROD END  
20. 119-4167 [1] ROD  
21. 8T-4133 M [2] NUT (M10X1.5-THD)  
22. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
23. 6V-8211 M [3] BOLT (M6X1X55-MM)  
24. 152-3764 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
25. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 105-3769 Y [1] SENSOR GP-POSITION (ARTICULATION ANGLE)  
28. 2H-3429 [1] RING-RETAINING  
29. 6D-3025 [2] BALL BEARING  
30. 152-7205 [1] SHAFT  
31. 2L-6726 [2] RING-RETAINING  
32. 4J-9448 [3] LUG  
33. 135-4708 [1] HARNESS AS-CONTROL (TRACTION-MAIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  8T-8737 [58] PLUG-SEAL  
34. 3K-0360 [4] SEAL-O-RING  
35. 135-4705 [1] HARNESS AS-CONTROL (TRACTION-REAR AXLE)  
  102-8808 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
36. 187-5032 CY [1] SERVICE GP-MACHINE (TRACTION CONTROL SYSTEM)  
37. 109-7330 Y [4] SENSOR GP-SPEED (WHEEL SPEED)  
38. 139-8974 [1] HARNESS AS-CONTROL (TRACTION-FRONT AXLE)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
39. 6V-3265 [6] CLIP  
40. 2H-9524 [2] GROMMET  
41. 8T-5387 [2] GROMMET  
42. 109-7079 [2] GUARD AS  
43. 1S-9593 [1] STRAP-CABLE  
44. 9U-2277 [1] CLIP AS  
45. 8L-8413 [1] STRAP-CABLE (WHITE)  
46. 118-9623 [1] PLATE AS  
  6B-4284 [4] RIVET  
47. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
48. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4P-8134 [3] CLIP (LADDER)  
50. 141-7553 [1] PLUG AS  
51. 141-9817 [1] GUARD AS  
52. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
53. 8T-9655 [8] MOUNT-ISOLATION  
54. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
55. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
56. 1S-0994 [1] CLIP (LOOP)  
57. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
58. 141-7552 [1] PLUG AS (FOR IT38G ONLY)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Engine Starting with Auxiliary Start Receptacle - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Circuit Breakers - Reset
938G Wheel Loader and IT38G Integrated Toolcarrier
Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery or Battery Cable - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Temperature Sender (Torque Converter Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train
Temperature Sender (Hydraulic Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Wheel Speed Sensor
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System
Toggle Switch (Hood Tilt)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Temperature Switch (Axle Oil Cooler)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Test/Enable Switch
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM)
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Operator Display
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Sensors
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Data Link
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Brake Air Purge Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Harness Code Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Switches
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Sensors
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Sensors
Payload Control System (PCS) 2.X
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Testing and Adjusting
Articulation Angle Position Sensor - Adjust and Calibrate
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wheel Speed Sensor - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electric Starting System - Test
3114, 3116, and 3126 Engines
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
System Schematic
Machine Security System
Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Remote Direction Switch - Disable
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Flash Program
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Open Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Short Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Connector - Inspect
Work Area Visual System
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Electrical Component and Connector Locations
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0190 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0191 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0367 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0621 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Toggle Switch (Automatic/Manual)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Limit Switch (Parking Brake)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
General Information
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Connector Locations
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Code List
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Capabilities
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0248 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 00
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0605 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0606 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0607 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0616 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0653 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0687 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Component and Connector Locations
Machine Security System
Connector Locations
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electrical Component and Connector Locations
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Procedure to Disable Top Gears {3168}
2000/02/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06
Correction to Operation and Maintenance Manual , "Transmission Neutralizer Override Control" {7332, 7451}
2001/12/17
Improved Pressure Switch Now Used {1435}
2004/04/19
Improved Service Meter Used {7478}
2004/05/03
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
An Improved Backup Alarm is Now Available {7406}
2009/01/26
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 938G :

WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-FRONT
134-8640 WIRING GP-FRONT
WIRING GP-FRONT
134-8640 WIRING GP-FRONT
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-RELAY PANEL
137-6838 WIRING GP-RELAY PANEL
WIRING GP-SECONDARY STEERING
143-2469 WIRING GP-SECONDARY STEERING
WIRING GP-SENSOR
130-4730 WIRING GP-SENSOR
WIRING GP-SENSOR
130-4730 WIRING GP-SENSOR
WIRING GP-TRACTION CONTROL
134-8505 WIRING GP-TRACTION CONTROL

Truck sale:

 
 
Caterpillar 938G
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 938G, forks, Construction
 
Caterpillar 938G, forks, Construction
- forks
HOLT CAT
Caterpillar 938 G, Wheel Loaders, Construction
42,748 
Caterpillar 938 G, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR ROMANIA
 
32,500 
Caterpillar 938G, Wheel Loaders, Construction


Caterpillar 938G, Wheel Loaders, Construction
29,255 
Caterpillar 938G, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.