AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

133-2964 CYLINDER GP-LIFT -LH S/N 7LS1-UP 177.8MM BORE X 833MM STROKE PART OF 119-4422 CYLINDER & SEAL GP-LIFT Type 1 972G


HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP

WHEEL LOADER 972G WHEEL LOADER 7LS
 972G Wheel Loader 7LS00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2569 972G 7LS   (1997)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LIFT
133-2963 CYLINDER GP-LIFT
CYLINDER GP-LIFT
133-2963 CYLINDER GP-LIFT
CYLINDER GP-LIFT
133-2964 CYLINDER GP-LIFT
CYLINDER GP-LIFT
133-2964 CYLINDER GP-LIFT
CYLINDER GP-TILT
133-2962 CYLINDER GP-TILT
CYLINDER GP-TILT
188-2445 CYLINDER GP-TILT
 

#SEBP25690430
 

133-2964: CYLINDER GP-LIFT

133-2964 CYLINDER GP-LIFT -LH
S/N 7LS1-UP
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
Type 1
i00577313 SEBP2569
1332964 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-4048 [1] CYLINDER AS  
  9T-8676 [1] BUSHING  
2. 3J-9449 [1] LOCKNUT (2-1/2-12-THD)  
3. 8T-1789 [1] SEAL AS  
4. 8M-4228 [1] RING-WEAR  
5. 6E-1440 [1] PISTON  
6. 8J-1665 [1] SEAL-O-RING  
7. 9X-7273 [1] RING-BACKUP  
8. 133-4046 [1] HEAD  
9. 133-4047 [1] ROD AS  
10. 9T-2584 [1] RING-RETAINING (INTERNAL)  
11. 8T-8389 [1] SEAL-WIPER  
12. 5J-8325 [1] SEAL-U-CUP  
13. 8C-9121 [1] SEAL AS  
14. 8T-6745 [1] RING-WEAR  
15. 8T-0362 M [2] BOLT (M20X2.5X110-MM)  
16. 6V-3669 M [6] BOLT (M20X2.5X80-MM)  
17. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25690431
 

133-2964: CYLINDER GP-LIFT

133-2964 CYLINDER GP-LIFT -LH
S/N 7LS1-UP
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
Type 2
i01410518 SEBP2569
1332964 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-4048 [1] CYLINDER AS  
1A. 9T-8676 [1] BUSHING  
2. 3J-9449 [1] LOCKNUT (2-1/2-12-THD)  
3. 8T-1789 J [1] SEAL AS  
4. 8M-4228 J [1] RING-WEAR  
5. 6E-1440 [1] PISTON  
6. 8J-1665 J [1] SEAL-O-RING  
7. 9X-7273 J [1] RING-BACKUP  
8. 133-4046 [1] HEAD  
9. 133-4047 [1] ROD AS  
10. 225-3285 CJ [1] SEAL-WIPER  
11. 167-2320 CJ [1] SEAL-U-CUP  
12. 167-2209 CJ [1] SEAL AS-BUFFER  
13. 8T-6745 J [1] RING-WEAR  
14. 8T-0362 M [2] BOLT (M20X2.5X110-MM)  
15. 6V-3669 M [6] BOLT (M20X2.5X80-MM)  
16. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  228-1779 J [1] KIT-SEAL (LIFT CYLINDER)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25690432
 

133-2962: CYLINDER GP-TILT

133-2962 CYLINDER GP-TILT
S/N 7LS1-306
235MM BORE X 535MM STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
i00591222 SEBP2569
1332962 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6179 [1] CYLINDER AS  
  9J-7100 [1] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 7J-2087 J [1] RING-WEAR  
4. 4T-4143 J [1] SEAL AS  
5. 7J-4083 [1] PISTON  
6. 173-7756 [2] WASHER (70.08X114X6.35-MM THK)  
7. 8F-6230 J [1] SEAL-O-RING  
8. 3J-8466 J [1] RING-BACKUP  
9. 133-6178 [1] HEAD  
10. 8T-0666 M [6] BOLT (M24X3X90-MM)  
11. 6V-8237 [8] WASHER (26X44X4-MM THK)  
12. 8T-0668 M [2] BOLT (M24X3X110-MM)  
13. 173-7755 [1] ROD AS  
  9J-7099 [1] BUSHING  
14. 8T-6745 J [1] RING-WEAR  
15. 346-5193 J [1] SEAL AS-BUFFER  
16. 346-5201 J [1] SEAL-U-CUP  
17. 346-5199 J [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  381-2337 J [1] KIT-HYD CYLINDER SEAL  
    (KIT INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25690433
 

188-2445: CYLINDER GP-TILT

188-2445 CYLINDER GP-TILT
S/N 7LS307-UP
235 MM (9.25 IN) BORE X 535 MM (21.06 IN) STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
i01291224 SEBP2569
1882445 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6179 [1] CYLINDER AS  
  9J-7100 [1] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 7J-2087 [1] RING-WEAR  
4. 4T-4143 [1] SEAL AS  
5. 187-6650 [1] PISTON  
6. 173-7756 [1] WASHER (70.08X114X6.35-MM THK)  
7. 8F-6230 [1] SEAL-O-RING  
8. 3J-8466 [1] RING-BACKUP  
9. 188-2447 [1] HEAD  
10. 8T-0666 M [6] BOLT (M24X3X90-MM)  
11. 6V-8237 [8] WASHER (26X44X4-MM THK)  
12. 8T-0668 M [2] BOLT (M24X3X110-MM)  
13. 188-2448 [1] ROD AS  
  9J-7099 [1] BUSHING  
14. 132-4907 [1] RING-WEAR  
15. 167-2211 [1] SEAL AS-BUFFER  
16. 167-2324 [1] SEAL-U-CUP  
17. 225-3286 [1] SEAL-WIPER  
18. 187-6651 [1] WASHER (70.08X114X12.7-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25690434
 

134-3016: FILTER GP-OIL

134-3016 FILTER GP-OIL -HYDRAULIC
S/N 7LS1-UP
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
i00600867 SEBP2569
1343016 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 8C-3446 [1] VALVE-SAMPLING  
3. 3J-7354 [1] SEAL-O-RING  
4. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
5. 7X-8549 [1] SWITCH AS-PRESSURE (HYD OIL FILTER BYPASS)  
6. 3J-1907 [1] SEAL-O-RING  
 

#SEBP25690435
 

199-2745: FILTER GP-OIL

199-2745 FILTER GP-OIL -HYDRAULIC
S/N 7LS301-UP
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
i01480859 SEBP2569
1992745 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
2. 3J-7354 [1] SEAL-O-RING  
3. 7X-8549 [1] SWITCH AS-PRESSURE (HYD OIL FILTER BYPASS)  
  3J-1907 [1] SEAL-O-RING  
4. 8C-3446 [1] VALVE-SAMPLING  
5. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
 

#SEBP25690436
 

119-4420: HYDRAULIC AR

119-4420 HYDRAULIC AR
S/N 7LS1-UP
PART OF 122-7190 GENERAL AR
i00878704 SEBP2569
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  119-4422 Y [1] CYLINDER & SEAL GP-LIFT (LH)  
  119-4423 Y [1] CYLINDER & SEAL GP-LIFT (RH)  
  119-4425 Y [1] CYLINDER & SEAL GP-TILT  
  119-4421 Y [1] LINES GP-HYDRAULIC  
  119-4426 Y [1] LINES GP-LIFT CYLINDER  
  119-4424 Y [1] LINES GP-TILT CYLINDER  
  122-7196 Y [1] MOUNTING GP-HYDRAULIC TANK  
  133-7337 Y [1] PUMP & MTG GP-HYDRAULIC  
  133-1843 Y [1] TANK GP-HYDRAULIC  
  130-1842 Y [1] VALVE & MTG GP-MAIN CONTROL (2-FUNCTION)  
  152-3679 Y [1] VALVE GP-LOWERING CONTROL (BUCKET)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25690437
 

140-0287: HYDRAULIC AR-3 VALVE

140-0287 HYDRAULIC AR-3 VALVE
S/N 7LS1-UP
i01649423 SEBP2569
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  140-7412 Y [1] ARM & BEARING AS-LIFT  
  150-9053 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
    -OR-
  207-7448 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
  133-9187 Y [1] LINES GP-FRONT  
  130-1843 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25690438
 

119-4428: KICKOUT & POSITIONER GP

119-4428 KICKOUT & POSITIONER GP
S/N 7LS1-183
PART OF 148-7176 ELECTRICAL AR
i00917453 SEBP2569
1194428 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5559 [1] BRACKET  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [1] RING-RETAINING  
4. 3S-2093 [2] STRAP-CABLE  
5. 3T-3045 [1] CLIP AS  
6. 4E-2250 [1] HOUSING  
7. 4E-2453 [1] SHAFT  
8. 4E-7088 [1] LEVER  
9. 4V-1939 [4] CLAMP  
10. 4V-4840 [1] MAGNET AS  
11. 5V-6439 [2] PLATE  
12. 6D-3025 [2] BALL BEARING  
13. 7I-3236 [1] SUPPORT AS  
14. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
15. 7X-7662 [1] ROD END  
16. 8C-5607 [6] MOUNT-ISOLATION  
17. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
18. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
19. 089-7338 [5] SLEEVE  
20. 116-7965 [1] GUARD AS  
  8C-3334 [1] RIVET-TUBULAR  
21. 117-1324 [1] CONTROL GP-POSITION (WORK TOOL)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
22. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
23. 124-4592 [1] ROD END  
24. 131-3246 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
25. 4E-5210 [1] TUBE AS  
26. 136-1871 [1] HARNESS AS-WORK TOOL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
27. 137-6630 [1] BRACKET  
28. 138-7703 [1] ARM-BAIL  
29. 138-7815 [1] ROD  
30. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
31. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
32. 4D-7794 [1] CLIP  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5C-7261 M [1] NUT (M8X1.25-THD)  
35. 5C-9553 M [2] BOLT (M6X1X16-MM)  
36. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
37. 6V-2313 M [3] BOLT (M5X0.8X30-MM)  
38. 6V-8237 [2] WASHER (26X44X4-MM THK)  
39. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
40. 7X-2534 M [4] BOLT (M6X1X50-MM)  
41. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
42. 8T-0669 M [2] BOLT (M24X3X130-MM)  
43. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [5] NUT (M10X1.5-THD)  
45. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
46. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
47. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
48. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
51. 9X-2480 M [3] BOLT (M6X1X45-MM)  
52. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
53. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25690439
 

119-4428: KICKOUT & POSITIONER GP

119-4428 KICKOUT & POSITIONER GP
S/N 7LS184-UP
PART OF 148-7176 ELECTRICAL AR
Type 1
i01034901 SEBP2569
1194428 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5559 [1] BRACKET  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [1] RING-RETAINING  
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 4E-2250 [1] HOUSING  
7. 4E-2453 [1] SHAFT  
8. 4E-7088 [1] LEVER  
9. 4V-1939 [4] CLAMP  
10. 4V-4840 [1] MAGNET AS  
11. 5V-6439 [2] PLATE  
12. 6D-3025 [2] BALL BEARING  
13. 7I-3236 [1] SUPPORT AS  
14. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
15. 7X-7662 [1] ROD END  
16. 8C-5607 [6] MOUNT-ISOLATION  
17. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
18. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
19. 126-2743 [5] SPACER (12X20X9-MM THK)  
20. 116-7965 [1] GUARD AS  
  8C-3334 [1] RIVET-TUBULAR  
21. 164-3583 C [1] CONTROL GP-POSITION (WORK TOOL)  
  9X-5617 [1] FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)  
  102-8808 C [1] KIT-CONNECTING PLUG (3-PIN)  
  8T-8730 C [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3E-3368 C [5] WEDGE-PLUG LOCK (3-PIN)  
22. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
23. 124-4592 [1] ROD END  
24. 131-3246 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
25. 4E-5210 [1] TUBE AS  
26. 154-9000 C [1] HARNESS AS-WORK TOOL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
27. 137-6630 [1] BRACKET  
28. 138-7703 [1] ARM-BAIL  
29. 138-7815 [1] ROD  
30. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
31. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
32. 4D-7794 [1] CLIP  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5C-7261 M [1] NUT (M8X1.25-THD)  
35. 5C-9553 M [2] BOLT (M6X1X16-MM)  
36. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
37. 6V-2313 M [3] BOLT (M5X0.8X30-MM)  
38. 6V-8237 [2] WASHER (26X44X4-MM THK)  
39. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
40. 7X-2534 M [4] BOLT (M6X1X50-MM)  
41. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
42. 8T-0669 M [2] BOLT (M24X3X130-MM)  
43. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [5] NUT (M10X1.5-THD)  
45. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
46. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
47. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
48. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
51. 9X-2480 M [3] BOLT (M6X1X45-MM)  
52. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
53. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 972G :

CYLINDER GP-LIFT
133-2963 CYLINDER GP-LIFT
CYLINDER GP-LIFT
133-2963 CYLINDER GP-LIFT
CYLINDER GP-FORK
203-2208 CYLINDER GP-FORK
CYLINDER GP-FORK
153-3747 CYLINDER GP-FORK
CYLINDER GP-BUCKET
188-3120 CYLINDER GP-BUCKET
CYLINDER & SEAL GP-TILT
119-4425 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-TILT
119-4425 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-LIFT
119-4423 CYLINDER & SEAL GP-LIFT
CYLINDER GP-LIFT
133-2964 CYLINDER GP-LIFT
CYLINDER GP-TILT
133-2962 CYLINDER GP-TILT
CYLINDER GP-TILT
188-2445 CYLINDER GP-TILT
FILTER GP-OIL
134-3016 FILTER GP-OIL
FILTER GP-OIL
199-2745 FILTER GP-OIL
119-4420 HYDRAULIC AR
140-0287 HYDRAULIC AR-3 VALVE
KICKOUT & POSITIONER GP
119-4428 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 972G
 
Caterpillar 972G
- bucket
FINNING CANADA
Caterpillar 972G, Construction
71,000 
Caterpillar 972G, Construction
- Wheel Loaders
BUTLER MACHINERY COMPANY
Caterpillar 972G, Construction
53,385 
Caterpillar 972G, Construction
- Wheel Loaders
WILLIAM ADAMS PTY. LTD.
Australia
 
55,000 
Caterpillar 972G, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 972G, Construction
49,000 
Caterpillar 972G, Construction
- Wheel Loaders
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.