HYDRAULIC SYSTEM
HYDRAULIC GPOPERATOR STATION
CAB GPCONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
HYDRAULIC GP#SEBP25850440
197-6445: HYDRAULIC AR-GRAPPLE ROTATOR
197-6445 HYDRAULIC AR-GRAPPLE ROTATOR
S/N 1YS1-UP
322B LL (18" RISER)
FOR USE WITH RISER AND LL FRONT LINKAGE
CANNOT BE USED WITH HR-BUTT N TOP AUXILIARY FLOW CONT
AN ATTACHMENT
S/N 1YS1-UP
322B LL (18" RISER)
FOR USE WITH RISER AND LL FRONT LINKAGE
CANNOT BE USED WITH HR-BUTT N TOP AUXILIARY FLOW CONT
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 137-6580 Y | [1] | CONTROL GP-PILOT OPERATED HYD | ||
| 129-7995 Y | [1] | DRIVE GP-AUXILIARY PUMP | ||
| 197-6451 Y | [1] | LINES GP-FRONT | ||
| 197-6452 Y | [1] | LINES GP-PILOT | ||
| 136-0058 Y | [1] | LINES GP-ROTATOR | ||
| 139-5355 Y | [1] | PUMP & MTG GP-IMPLEMENT | ||
| 197-5474 Y | [1] | VALVE GP-CONTROL | ||
| 150-9159 Y | [1] | WIRING GP-GRAPPLE CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850441
163-3314: HYDRAULIC AR-LOG LOADER
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 137-6580 Y | [1] | CONTROL GP-PILOT OPERATED HYD | ||
| 129-7995 Y | [1] | DRIVE GP-AUXILIARY PUMP | ||
| 164-6952 Y | [1] | LINES GP-FRONT | ||
| 165-7325 Y | [1] | LINES GP-PILOT | ||
| 165-3802 Y | [1] | LINES GP-PUMP | ||
| 141-5951 Y | [1] | PUMP & MTG GP-AUXILIARY | ||
| 163-1642 Y | [1] | WIRING GP-LOG LOADER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850442
163-3315: HYDRAULIC AR-LOG LOADER
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 137-6580 Y | [1] | CONTROL GP-PILOT OPERATED HYD | ||
| 129-7995 Y | [1] | DRIVE GP-AUXILIARY PUMP | ||
| 165-7790 Y | [1] | LINES GP-FRONT | ||
| 165-7325 Y | [1] | LINES GP-PILOT | ||
| 165-7791 Y | [1] | LINES GP-PUMP | ||
| 141-5951 Y | [1] | PUMP & MTG GP-AUXILIARY | ||
| 163-1642 Y | [1] | WIRING GP-LOG LOADER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850443
104-5807: HYDRAULIC GP-TILT CAB
104-5807 HYDRAULIC GP-TILT CAB
S/N 1YS1-UP
PART OF 137-5257, 137-5258 CAB AR-FORESTRY
Type 1
AN ATTACHMENT
S/N 1YS1-UP
PART OF 137-5257, 137-5258 CAB AR-FORESTRY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-1641 | [5] | CLIP (LOOP) | |
| 2. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 3. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 104-6232 Y | [1] | CONTROL GP-CAB TILT | |
| 5. | 3B-7722 | [1] | BUSHING-PIPE | |
| 6. | 5H-7598 | [1] | NIPPLE-PIPE | |
| 7. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 032-1268 | [4] | CONNECTOR (90-DEG) | |
| 10. | 132-6774 I | [2] | HOSE AS | |
| 11. | 111-6192 I | [1] | HOSE AS | |
| 12. | 3J-1907 | [2] | SEAL-O-RING | |
| 13. | 6V-8397 | [2] | SEAL-O-RING | |
| 14. | 6V-8636 | [2] | CONNECTOR | |
| 15. | 2K-5760 | [2] | PIN | |
| 16. | 3B-5314 | [4] | PIN-COTTER | |
| 17. | 117-5148 Y | [1] | CYLINDER GP-CAB TILT | |
| 18. | 134-3461 | [1] | CABLE AS | |
| 19. | 093-2065 | [1] | GROMMET | |
| 20. | 4Y-5205 | [4] | WASHER-HARD (34X76X6-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850444
104-5807: HYDRAULIC GP-TILT CAB
104-5807 HYDRAULIC GP-TILT CAB
S/N 1YS1-UP
PART OF 137-5257, 137-5258, 197-6446, 197-6449 CAB AR-FORESTRY
Type 2
AN ATTACHMENT
S/N 1YS1-UP
PART OF 137-5257, 137-5258, 197-6446, 197-6449 CAB AR-FORESTRY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-1641 | [5] | CLIP (LOOP) | |
| 2. | 115-8645 C | [2] | GUARD | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 148-8907 CY | [1] | CONTROL GP-CAB TILT | |
| 5. | 3B-7722 | [1] | BUSHING-PIPE | |
| 6. | 5H-7598 | [1] | NIPPLE-PIPE | |
| 7. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 032-1268 | [4] | CONNECTOR (90-DEG) | |
| 10. | 132-6774 I | [2] | HOSE AS | |
| 11. | 111-6192 I | [1] | HOSE AS | |
| 12. | 2K-5760 | [2] | PIN | |
| 13. | 3B-5314 | [4] | PIN-COTTER | |
| 14. | 117-5148 Y | [1] | CYLINDER GP-CAB TILT | |
| 15. | 134-3461 | [1] | CABLE AS | |
| 16. | 8T-4137 CM | [2] | BOLT (M10X1.5X20-MM) | |
| 17. | 4Y-5205 | [4] | WASHER-HARD (34X76X6-MM THK) | |
| 18. | 7K-1181 C | [5] | STRAP-CABLE | |
| 19. | 2P-0318 C | [1] | BRACKET | |
| 20. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 21. | 7Y-3195 | [1] | GROMMET | |
| 22. | 148-8336 | [2] | CONNECTOR AS | |
| 23. | 123-2157 | [1] | GUARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850445
137-5262: HYDRAULIC GP-TILT CAB
137-5262 HYDRAULIC GP-TILT CAB
S/N 1YS1-UP
PART OF 137-5259 CAB AR-FORESTRY
Type 1
AN ATTACHMENT
S/N 1YS1-UP
PART OF 137-5259 CAB AR-FORESTRY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-1641 | [5] | CLIP (LOOP) | |
| 2. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 3. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 104-6232 Y | [1] | CONTROL GP-CAB TILT | |
| 5. | 3B-7722 | [1] | BUSHING-PIPE | |
| 6. | 5H-7598 | [1] | NIPPLE-PIPE | |
| 7. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 032-1268 | [4] | CONNECTOR (90-DEG) | |
| 10. | 137-0195 I | [2] | HOSE AS | |
| 11. | 111-6192 I | [1] | HOSE AS | |
| 12. | 3J-1907 | [2] | SEAL-O-RING | |
| 13. | 6V-8397 | [2] | SEAL-O-RING | |
| 14. | 6V-8636 | [2] | CONNECTOR | |
| 15. | 2K-5760 | [2] | PIN | |
| 16. | 3B-5314 | [4] | PIN-COTTER | |
| 17. | 139-2056 Y | [1] | CYLINDER GP-TILT | |
| 18. | 140-7731 | [1] | CABLE AS | |
| 19. | 093-2065 | [1] | GROMMET | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850446
137-5262: HYDRAULIC GP-TILT CAB
137-5262 HYDRAULIC GP-TILT CAB
S/N 1YS1-UP
PART OF 137-5259, 197-6450 CAB AR-FORESTRY
Type 2
AN ATTACHMENT
S/N 1YS1-UP
PART OF 137-5259, 197-6450 CAB AR-FORESTRY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-1641 | [5] | CLIP (LOOP) | |
| 2. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 148-8907 CY | [1] | CONTROL GP-CAB TILT | |
| 5. | 3B-7722 | [1] | BUSHING-PIPE | |
| 6. | 5H-7598 | [1] | NIPPLE-PIPE | |
| 7. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 032-1268 | [4] | CONNECTOR (90-DEG) | |
| 10. | 137-0195 I | [2] | HOSE AS | |
| 11. | 111-6192 I | [1] | HOSE AS | |
| 12. | 2K-5760 | [2] | PIN | |
| 13. | 3B-5314 | [4] | PIN-COTTER | |
| 14. | 147-2303 CY | [1] | CYLINDER GP-TILT | |
| 15. | 140-7731 | [1] | CABLE AS | |
| 16. | 7Y-3195 | [1] | GROMMET | |
| 17. | 4Y-5205 C | [4] | WASHER-HARD (34X76X6-MM THK) | |
| 18. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 20. | 7K-1181 | [9] | STRAP-CABLE | |
| 21. | 115-8645 | [4] | GUARD | |
| 22. | 2P-0318 | [1] | BRACKET | |
| 23. | 148-8336 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [2] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8636 | [2] | CONNECTOR | ||
| 24. | 123-2157 | [1] | GUARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850447
148-3670: HYDRAULIC GP-TILT CAB
148-3670 HYDRAULIC GP-TILT CAB
S/N 1YS1-UP
PART OF 137-5173 INSTALLATION AR-CAB
AN ATTACHMENT
S/N 1YS1-UP
PART OF 137-5173 INSTALLATION AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-1641 | [5] | CLIP (LOOP) | |
| 2. | 115-8645 | [2] | GUARD | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 148-8907 Y | [1] | CONTROL GP-CAB TILT | |
| 5. | 3B-7722 | [1] | BUSHING-PIPE | |
| 6. | 5H-7598 | [1] | NIPPLE-PIPE | |
| 7. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 032-1268 | [4] | CONNECTOR (90-DEG) | |
| 10. | 132-6774 I | [2] | HOSE AS | |
| 11. | 111-6192 I | [1] | HOSE AS | |
| 16. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 7K-1181 | [5] | STRAP-CABLE | |
| 19. | 2P-0318 | [1] | BRACKET | |
| 20. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 21. | 7Y-3195 | [1] | GROMMET | |
| 23. | 102-1174 E | GUARD (15CM) | ||
| 165-4934 F | [2] | PLUG AS | ||
| (EACH INCLUDES) | ||||
| 6V-8397 F | [1] | SEAL-O-RING | ||
| 6V-9508 F | [1] | PLUG (11/16-16-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25850448
159-7744: LEVER GP-CONTROL
159-7744 LEVER GP-CONTROL -HYDRAULIC ACTIVATION CONTROL
S/N 1YS1-UP
PART OF 111-6279 CONSOLE GP-OPERATOR
S/N 1YS1-UP
PART OF 111-6279 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | |
| 2. | 121-7057 | [1] | KNOB (HYDRAULIC CONTROLS LOCKOUT) | |
| 3. | 117-6269 | [1] | LEVER | |
| 4. | 117-6270 | [1] | SUPPORT AS | |
| 5. | 117-6272 | [1] | LEVER AS | |
| 6. | 5D-4822 | [3] | RING-RETAINING | |
| 7. | 117-6271 | [1] | SPRING | |
| 8. | 117-6274 | [1] | PIN | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP25850449
132-7437: LINES GP-AUXILIARY HYDRAULIC
132-7437 LINES GP-AUXILIARY HYDRAULIC
S/N 1YS1-UP
PART OF 138-6171 STICK AR-HOE
AN ATTACHMENT
S/N 1YS1-UP
PART OF 138-6171 STICK AR-HOE
AN ATTACHMENT
For full view, you need register
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-7442 I | [2] | HOSE AS | |
| 2. | 1P-3704 | [6] | SEAL-RECTANGULAR | |
| 3. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 4. | 6V-0400 | [4] | FLANGE-HALF | |
| 5. | 8T-4185 M | [8] | BOLT (M10X1.5X50-MM) | |
| 6. | 7Y-4538 | [4] | CLAMP-HALF | |
| 7. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 8. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8K-3235 | [2] | SPACER-SPECIAL | |
| 10. | 132-7439 | [1] | TUBE AS | |
| 11. | 132-7438 | [1] | TUBE AS | |
| 12. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 14. | 7X-0599 | [8] | WASHER-HARD (13X20X2-MM THK) | |
| 15. | 132-7443 | [2] | VALVE GP-MANUAL (WORKTOOL SHUTOFF) | |
| (EACH INCLUDES) | ||||
| 119-1353 | [1] | HANDLE | ||
| 155-7685 | [1] | PLATE | ||
| 155-7686 M | [1] | BOLT (M5X0.8X12-MM) | ||
| 16. | 162-0177 | [2] | PLUG AS | |
| 17. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 5P-0048 | [2] | COVER | |
| 19. | 1P-5767 | [4] | FLANGE-HALF | |
| 20. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 21. | 132-7441 | [2] | ELBOW | |
| 22. | 8T-4198 M | [8] | BOLT (M10X1.5X100-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
