AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

087-4782 ROTATING GP-PUMP S/N 1YS1-UP PART OF 087-4780, 087-4781 ROTATING GP-PUMP 322B L EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
FILTER GP
MOTOR GP
SWIVEL GP
TANK GP

EXCAVATOR 322B L EXCAVATOR 1YS
 322B L Excavator 1YS00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2585 322B L 1YS   (1996)

HYDRAULIC SYSTEM

PUMP GP
ROTATING GP-PUMP
087-4780 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4782 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
126-2135 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
126-2136 VALVE GP-PUMP CONTROL
 

#SEBP25850590
 

087-4782: ROTATING GP-PUMP

087-4782 ROTATING GP-PUMP
S/N 1YS1-UP
PART OF 087-4780, 087-4781 ROTATING GP-PUMP
i00463404 SEBP2585
0874782 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3368 [4] WASHER-SPRING  
2. 087-4783 [1] CYLINDER  
3. 167-6701 [1] PLATE-RETAINING  
4. 105-1517 M [14] SCREW  
5. 9T-3369 [1] PIN-CENTER  
6. 099-5713 [7] PISTON  
7. 9T-3745 [14] RING  
8. 9T-3391 B [1] SPACER (10X24.2X5.3-MM THK)(5.3MM THICK)  
  9T-3392 B [1] SPACER (10X24.2X5.4-MM THK)(5.4MM THICK)  
  9T-3393 B [1] SPACER (10X24.2X5.5-MM THK)(5.5MM THICK)  
  9T-3394 B [1] SPACER (10X24.2X5.6-MM THK)(5.6MM THICK)  
  9T-3395 B [1] SPACER (10X24.2X5.7-MM THK)(5.7MM THICK)  
  9T-3396 B [1] SPACER (10X24.2X5.8-MM THK)(5.8MM THICK)  
  9T-3397 B [1] SPACER (10X24.2X5.9-MM THK)(5.9MM THICK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25850591
 

107-6996: SCREEN GP-HYDRAULIC

107-6996 SCREEN GP-HYDRAULIC
S/N 1YS1-UP
PART OF 126-2011, 126-2089 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
i00473171 SEBP2585
1076996 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 096-2915 [1] ROD  
4. 8T-4133 M [2] NUT (M10X1.5-THD)  
5. 087-5297 [1] SCREEN AS  
6. 5H-5672 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP25850592
 

191-0886: SHAFT GP-HYDRAULIC MOTOR

191-0886 SHAFT GP-HYDRAULIC MOTOR
S/N 1YS1-UP
PART OF 190-8121 ROTATING GP-MOTOR
AN ATTACHMENT
i01502569 SEBP2585
1910886 SHAFT GP-HYDRAULIC MOTOR Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-1955 [1] KIT-BEARING  
2. 095-0929 [1] RING-RETAINING (EXTERNAL)  
 

#SEBP25850593
 

159-7841: SWIVEL GP

159-7841 SWIVEL GP
S/N 1YS1-UP
PART OF 115-8985, 129-5949, 199-7689 LINES GP-TRAVEL MOTOR
ALSO AN ATTACHMENT
i01520813 SEBP2585
1597841 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
2. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
3. 7Y-4817 [1] COVER  
4. 095-1716 [1] SEAL-O-RING  
5. 7I-7131 [1] RETAINER  
6. 7Y-4801 [1] HOUSING  
7. 159-7782 [5] SEAL  
8. 095-1625 [3] SEAL-O-RING  
9. 4I-6262 [1] ROTOR GP-SWIVEL  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP25850594
 

7Y-4800: SWIVEL GP

7Y-4800 SWIVEL GP
S/N 1YS1-UP
PART OF 129-5949 LINES GP-TRAVEL MOTOR
AN ATTACHMENT
i00540407 SEBP2585
7Y4800 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
2. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
3. 7Y-4817 [1] COVER  
4. 095-1716 [1] SEAL-O-RING  
5. 7I-7131 [1] RETAINER  
6. 7Y-4801 [1] HOUSING  
7. 096-4615 [5] SEAL  
8. 095-1625 [3] SEAL-O-RING  
9. 4I-6262 [1] ROTOR GP-SWIVEL  
10. 9S-8001 [1] PLUG  
11. 4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP25850595
 

126-2011: TANK & FILTER GP-HYDRAULIC

126-2011 TANK & FILTER GP-HYDRAULIC
S/N 1YS1-1352
PART OF 126-2010 TANK & MTG GP-HYDRAULIC
AN ATTACHMENT
i00513769 SEBP2585
1262011 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
2. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
3. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
5. 119-5162 [1] COVER  
6. 6V-6707 [1] SEAL-O-RING  
7. 115-8646 [1] GUARD  
8. 1P-4278 [1] CLAMP-HOSE  
9. 107-6995 Y [1] FILTER GP-OIL  
10. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
11. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
12. 112-0065 [1] BRACKET  
13. 121-1513 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 114-0741 [1] COVER  
16. 4J-0522 [1] SEAL-O-RING  
17. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 6J-2680 [2] SEAL-O-RING  
19. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
20. 123-1982 [1] PIPE  
21. 126-2079 [1] HOSE  
22. 107-6996 Y [1] SCREEN GP-HYDRAULIC  
23. 8H-7521 [1] SEAL-O-RING  
24. 121-1473 [1] PIPE AS  
25. 7X-2555 M [4] BOLT (M16X2X80-MM)  
26. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
27. 118-3997 Y [1] VALVE GP-BLOCKER  
28. 8T-4133 M [2] NUT (M10X1.5-THD)  
29. 5P-9299 [2] CLIP (LOOP)  
30. 111-4760 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
31. 3D-2824 [1] SEAL-O-RING  
32. 4I-5394 [1] SENDER AS-TEMPERATURE  
33. 3K-0360 [1] SEAL-O-RING  
34. 169-7946 [1] COVER AS  
35. 4I-3745 [1] CAP-PRESSURE  
36. 095-1730 [1] SEAL-O-RING  
37. 105-2652 [1] PLUG  
38. 6C-8496 [1] WASHER (46X60.5X1.5-MM THK)  
39. 095-1608 [1] SEAL-O-RING  
40. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
41. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
42. 4I-3741 Y [1] FILTER GP-OIL  
43. 094-3245 [1] GAUGE GP-SIGHT  
44. 7Y-4754 [2] BLOCK  
45. 094-3247 M [2] BOLT (M10X1.5X36-MM)  
46. 095-1514 [4] SEAL-O-RING  
47. 095-1517 [4] SEAL-O-RING  
48. 096-4754 [1] PIPE  
49. 9S-4182 [1] PLUG (7/16-20-THD)  
50. 112-0058 [1] COVER AS  
  1U-2827 [1] GUIDE-VALVE  
  8J-8783 [1] VALVE-DRAIN  
51. 5M-2057 [1] SEAL-O-RING  
52. 9J-7031 [1] PLUG-DRAIN  
53. 4M-0189 [1] SEAL-O-RING  
54. 3J-7354 [1] SEAL-O-RING  
55. 133-5812 [1] SUPPORT  
56. 7T-1099 [3] LINK  
57. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
58. 087-5140 [1] PLATE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25850596
 

126-2011: TANK & FILTER GP-HYDRAULIC

126-2011 TANK & FILTER GP-HYDRAULIC
S/N 1YS1353-UP
PART OF 126-2010 TANK & MTG GP-HYDRAULIC
AN ATTACHMENT
i01567572 SEBP2585
1262011 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TANK AS-HYDRAULIC  
  7T-1099 [3] LINK  
  8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  087-5140 [1] PLATE  
2. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
3. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
5. 119-5162 [1] COVER  
6. 6V-6707 [1] SEAL-O-RING  
7. 115-8646 [1] GUARD  
8. 1P-4278 [1] CLAMP-HOSE  
9. 107-6995 Y [1] FILTER GP-OIL  
10. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
11. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
12. 112-0065 [1] BRACKET  
13. 121-1513 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 114-0741 [1] COVER  
16. 4J-0522 [1] SEAL-O-RING  
17. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 6J-2680 [2] SEAL-O-RING  
19. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
20. 123-1982 [1] PIPE  
21. 126-2079 [1] HOSE  
22. 107-6996 Y [1] SCREEN GP-HYDRAULIC  
23. 8H-7521 [1] SEAL-O-RING  
24. 121-1473 [1] PIPE AS  
25. 7X-2555 M [4] BOLT (M16X2X80-MM)  
26. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
27. 118-3997 Y [1] VALVE GP-BLOCKER  
28. 8T-4133 M [2] NUT (M10X1.5-THD)  
29. 5P-9299 [2] CLIP (LOOP)  
30. 111-4760 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
31. 3D-2824 [1] SEAL-O-RING  
32. 4I-5394 [1] SENDER AS-TEMPERATURE  
33. 3K-0360 [1] SEAL-O-RING  
34. 169-7946 [1] COVER AS  
35. 4I-3745 [1] CAP-PRESSURE  
36. 095-1730 [1] SEAL-O-RING  
37. 105-2652 [1] PLUG  
38. 6C-8496 [1] WASHER (46X60.5X1.5-MM THK)  
39. 095-1608 [1] SEAL-O-RING  
40. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
41. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
42. 184-3930 [1] FILTER GP-OIL (HYDRAULIC, PILOT SUPPLY)  
  103-8236 [1] RING  
43. 094-3245 [1] GAUGE GP-SIGHT  
  7Y-4754 [1] BLOCK  
  094-3247 M [2] BOLT (M10X1.5X36-MM)  
  095-1514 [4] SEAL-O-RING  
  095-1517 [4] SEAL-O-RING  
  096-4754 [1] PIPE  
44. 112-0058 [1] COVER AS  
  1U-2827 [1] GUIDE-VALVE  
  8J-8783 [1] VALVE-DRAIN  
45. 5M-2057 [1] SEAL-O-RING  
46. 9J-7031 [1] PLUG-DRAIN  
47. 4M-0189 [1] SEAL-O-RING  
48. 3J-7354 [1] SEAL-O-RING  
49. 9S-4182 [1] PLUG (7/16-20-THD)  
51. 133-5812 [1] SUPPORT  
52. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25850597
 

126-2089: TANK & FILTER GP-HYDRAULIC

126-2089 TANK & FILTER GP-HYDRAULIC
S/N 1YS1-1352
PART OF 126-2088 TANK & MTG GP-HYDRAULIC
i00513915 SEBP2585
1262089 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
2. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
3. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
5. 119-5162 [1] COVER  
6. 6V-6707 [1] SEAL-O-RING  
7. 115-8646 [1] GUARD  
8. 1P-4278 [1] CLAMP-HOSE  
9. 107-6995 Y [1] FILTER GP-OIL  
10. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
11. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
12. 112-0065 [1] BRACKET  
13. 121-1513 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 114-0741 [1] COVER  
15. 4J-0522 [1] SEAL-O-RING  
16. 126-2079 [1] HOSE  
17. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 6J-2680 [2] SEAL-O-RING  
19. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
20. 9S-4182 [1] PLUG (7/16-20-THD)  
21. 123-1982 [1] PIPE  
22. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
23. 107-6996 Y [1] SCREEN GP-HYDRAULIC  
24. 111-4760 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
25. 3D-2824 [1] SEAL-O-RING  
26. 8T-4133 M [2] NUT (M10X1.5-THD)  
27. 5P-9299 [2] CLIP (LOOP)  
28. 4I-5394 [1] SENDER AS-TEMPERATURE  
29. 3K-0360 [1] SEAL-O-RING  
30. 169-7946 [1] COVER AS  
31. 4I-3745 [1] CAP-PRESSURE  
32. 095-1730 [1] SEAL-O-RING  
33. 105-2652 [1] PLUG  
34. 6C-8496 [1] WASHER (46X60.5X1.5-MM THK)  
35. 095-1608 [1] SEAL-O-RING  
36. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
37. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
38. 4I-3741 Y [1] FILTER GP-OIL  
39. 094-3245 [1] GAUGE GP-SIGHT  
  7Y-4754 [2] BLOCK  
  094-3247 M [2] BOLT (M10X1.5X36-MM)  
  095-1514 [4] SEAL-O-RING  
  095-1517 [4] SEAL-O-RING  
  096-4754 [1] PIPE  
40. 112-0058 [1] COVER AS  
  1U-2827 [1] GUIDE-VALVE  
  8J-8783 [1] VALVE-DRAIN  
41. 5M-2057 [1] SEAL-O-RING  
42. 9J-7031 [1] PLUG-DRAIN  
43. 4M-0189 [1] SEAL-O-RING  
44. 3J-7354 [1] SEAL-O-RING  
45. 133-5812 [1] SUPPORT  
46. 087-5140 [1] PLATE  
47. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
48. 7T-1099 [3] LINK  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25850598
 

126-2089: TANK & FILTER GP-HYDRAULIC

126-2089 TANK & FILTER GP-HYDRAULIC
S/N 1YS1353-UP
PART OF 126-2088 TANK & MTG GP-HYDRAULIC
i01567574 SEBP2585
1262089 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. TANK AS-HYDRAULIC  
  087-5140 [1] PLATE  
  8T-4191 M [2] BOLT (M10X1.5X16-MM)  
  7T-1099 [3] LINK  
2. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
3. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
5. 119-5162 [1] COVER  
6. 6V-6707 [1] SEAL-O-RING  
7. 115-8646 [1] GUARD  
8. 1P-4278 [1] CLAMP-HOSE  
9. 107-6995 Y [1] FILTER GP-OIL  
10. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
11. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
12. 112-0065 [1] BRACKET  
13. 121-1513 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 114-0741 [1] COVER  
15. 4J-0522 [1] SEAL-O-RING  
16. 126-2079 [1] HOSE  
17. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 6J-2680 [2] SEAL-O-RING  
19. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
20. 123-1982 [1] PIPE  
21. 107-6996 Y [1] SCREEN GP-HYDRAULIC  
22. 111-4760 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
23. 3D-2824 [1] SEAL-O-RING  
24. 8T-4133 M [2] NUT (M10X1.5-THD)  
25. 5P-9299 [2] CLIP (LOOP)  
26. 4I-5394 [1] SENDER AS-TEMPERATURE  
27. 3K-0360 [1] SEAL-O-RING  
28. 169-7946 [1] COVER AS  
29. 4I-3745 [1] CAP-PRESSURE  
30. 095-1730 [1] SEAL-O-RING  
31. 105-2652 [1] PLUG  
32. 6C-8496 [1] WASHER (46X60.5X1.5-MM THK)  
33. 095-1608 [1] SEAL-O-RING  
34. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
35. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 184-3930 Y [1] FILTER GP-OIL (HYDRAULIC, PILOT SUPPLY)  
37. 094-3245 [1] GAUGE GP-SIGHT  
  7Y-4754 [2] BLOCK  
  094-3247 M [2] BOLT (M10X1.5X36-MM)  
  095-1514 [4] SEAL-O-RING  
  095-1517 [4] SEAL-O-RING  
  096-4754 [1] PIPE  
38. 112-0058 [1] COVER AS  
  1U-2827 [1] GUIDE-VALVE  
  8J-8783 [1] VALVE-DRAIN  
39. 5M-2057 [1] SEAL-O-RING  
40. 9J-7031 [1] PLUG-DRAIN  
41. 4M-0189 [1] SEAL-O-RING  
42. 3J-7354 [1] SEAL-O-RING  
43. 9S-4182 [1] PLUG (7/16-20-THD)  
45. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
46. 133-5812 [1] SUPPORT  
47. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25850599
 

126-2010: TANK & MTG GP-HYDRAULIC

126-2010 TANK & MTG GP-HYDRAULIC
S/N 1YS1-UP
(HYD-SUCTION SHUT OFF)
AN ATTACHMENT
i00513768 SEBP2585
1262010 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2011 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 7X-2553 M [6] BOLT (M16X2X40-MM)  
3. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
Hydraulic Horsepower Testing
Hydraulic Horsepower Testing
Specifications
Main Hydraulic Pump
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Piston Pump (Main) - Purge
322B, 325B and 330B Excavators Attachments
Pump Control (Negative Flow) - Adjust
322B Excavator Hydraulic System
Pump Control (Output Flow) - Adjust
322B Excavator Hydraulic System
Gear Pump (Pilot) - Test
322B Excavator Hydraulic System
Pump Control (Negative Flow) - Test
322B Excavator Hydraulic System
Piston Pump (Main) - Test
322B Excavator Hydraulic System
Main Hydraulic Pump Air - Purge
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Engine & Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Main Hydraulic Pump & Pump Drive Coupling
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Main Hydraulic Pump
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Pump Control Pilot Lines Improved {5058}
1998/01/26
Correct the Flow Meter Tool Layout in Systems Operation/Testing and Adjusting, RENR1920 {5050}
1999/12/06
Correct the Flow Meter Tool Layout in Systems Operation/Testing and Adjusting, RENR1020 {5050}
1999/12/06
The Main Hydraulic Pump Regulator Is Improved {3222}
2000/11/06
The Specifications Are Identified For Auxiliary Hydraulic Pumps {3108, 5073}
2002/02/04
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 322B L :

ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4780 ROTATING GP-PUMP
ROTATING GP-MOTOR
191-0883 ROTATING GP-MOTOR
ROTATING GP-MOTOR
190-8121 ROTATING GP-MOTOR
PUMP GP-MAIN HYDRAULIC
126-2073 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
123-2231 PUMP GP-MAIN HYDRAULIC
PUMP GP-GEAR
228-1838 PUMP GP-GEAR
PUMP GP-GEAR
136-8900 PUMP GP-GEAR
SCREEN GP-HYDRAULIC
107-6996 SCREEN GP-HYDRAULIC
SHAFT GP-HYDRAULIC MOTOR
191-0886 SHAFT GP-HYDRAULIC MOTOR
SWIVEL GP
159-7841 SWIVEL GP
SWIVEL GP
7Y-4800 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
126-2011 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
126-2011 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
126-2089 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
126-2089 TANK & FILTER GP-HYDRAULIC

Truck sale:

 
59,500 
Caterpillar 322BL, Construction
- Crawler Excavators
RING POWER CORP.
 
35,000 
Caterpillar 322BL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 322BL, Construction
45,000 
Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO
Caterpillar 322BL, Construction
42,500 
Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO
Caterpillar 322BL, Construction
34,000 
Caterpillar 322BL, Construction
- Crawler Excavators
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.