AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

133-7377 CONTROL GP-HYDRAULIC -BLADE ANGLE S/N 3DS344-UP; BDW1-UP PART OF 131-0775, 379-7868 HYDRAULIC AR-MACHINE ALSO AN ATTACHMENT 527


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK
CONTROL GP-CLUTCH & BRAKE
CONTROL GP
PANEL GP
HEATER GP

TRACK SKIDDER 527 TRACK SKIDDER 3DS
 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2590 527 3DS   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
133-7377 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
133-7378 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
133-7381 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
141-9924 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
131-3056 CONTROL GP-HYDRAULIC HAND
 

#SEBP25900360
 

133-7377: CONTROL GP-HYDRAULIC

133-7377 CONTROL GP-HYDRAULIC -BLADE ANGLE
S/N 3DS344-UP; BDW1-UP
PART OF 131-0775, 379-7868 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00503734 SEBP2590
1337377 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-3713 [1] ROD-CONTROL  
2. 1B-0676 [2] PIN  
3. 134-2622 [1] LEVER AS  
4. 3W-1496 [1] ROD  
5. 8T-0798 [4] BEARING-ROLLER  
6. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
7. 3W-1615 [1] LEVER  
8. 7H-3641 [1] END-ROD (5/16-24-THD)  
9. 6V-8918 [1] BOLT (5/16-18X1.25-IN)  
10. 3B-4615 [2] PIN-COTTER  
11. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
12. 031-4155 [1] LOCKNUT (5/16-18-THD)  
13. 6V-1033 [1] END-BEARING ROD  
14. 8G-4680 [1] YOKE  
15. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
16. 7S-5757 [1] RING-RETAINING  
17. 8E-1370 [1] WASHER-THRUST  
18. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
19. 8T-0741 [4] SEAL-LIP TYPE  
 

#SEBP25900361
 

133-7378: CONTROL GP-HYDRAULIC

133-7378 CONTROL GP-HYDRAULIC -BULLDOZER LIFT
S/N 3DS1-UP; BDW1-UP
PART OF 129-7609, 131-0775, 379-7868 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00503736 SEBP2590
1337378 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
4. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5J-5315 [1] ROD END  
6. 1B-0676 [2] PIN  
7. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
8. 8T-0798 [2] BEARING-ROLLER  
9. 8T-0741 [2] SEAL-LIP TYPE  
10. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
11. 3B-4615 [2] PIN-COTTER  
12. 7F-3713 [1] ROD-CONTROL  
13. 4D-4064 [1] ROD END (3/8-24-THD)  
14. 8G-4650 [1] LEVER  
15. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
16. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
17. 3W-1487 [1] SUPPORT  
18. 7X-0578 [4] WASHER-HARD (10.2X32X2.5-MM THK)  
19. 3W-1488 [1] SHAFT AS  
20. 3W-1486 [1] ROD  
21. 3W-2959 [1] COVER  
22. 7M-4914 [1] SPRING-HYD DECELERATOR  
23. 3W-1482 [1] SHAFT AS  
24. 6P-5208 [1] GUIDE-CONTROL  
25. 6P-5207 [1] SEAL-DOMED  
26. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
 

#SEBP25900362
 

133-7381: CONTROL GP-HYDRAULIC

133-7381 CONTROL GP-HYDRAULIC -BULLDOZER TILT
S/N 3DS344-UP; BDW1-UP
PART OF 131-0775, 379-7868 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00503740 SEBP2590
1337381 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3641 [3] END-ROD (5/16-24-THD)  
2. 6V-8918 [3] BOLT (5/16-18X1.25-IN)  
3. 6V-8186 [4] NUT-FULL (5/16-24-THD)  
4. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
5. 8G-4659 [1] SHAFT AS  
6. 3W-1491 [1] SUPPORT  
7. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
8. 6V-8801 [1] NUT (3/8-16-THD)  
9. 3R-7116 [1] ROD-CONTROL  
10. 3W-1495 [1] LEVER  
11. 1B-0676 [3] PIN  
12. 3B-4615 [3] PIN-COTTER  
13. 4J-2701 [1] ROD END  
14. 031-4155 [3] LOCKNUT (5/16-18-THD)  
15. 3B-4617 [1] PIN-COTTER  
16. 2H-2292 [1] ROD-ADJUSTMENT  
17. 8T-0798 [6] BEARING-ROLLER  
18. 3W-1492 [1] LEVER  
19. 7F-3713 [1] ROD-CONTROL  
20. 3W-1493 [1] LEVER  
21. 3W-2960 [1] SHAFT AS  
22. 9B-7237 [7] BOLT (3/8-16X1.25-IN)  
23. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 8T-4122 [5] WASHER-HARD (17X32X3.5-MM THK)  
25. 8T-0741 [6] SEAL-LIP TYPE  
26. 1B-8704 [1] KEY-WOODRUFF  
 

#SEBP25900363
 

141-9924: CONTROL GP-HYDRAULIC

141-9924 CONTROL GP-HYDRAULIC -BULLDOZER LIFT
S/N 3DS1-UP
PART OF 141-4036 HYDRAULIC AR
AN ATTACHMENT
i00580728 SEBP2590
1419924 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [2] NUT-FULL (1/2-20-THD)  
3. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
4. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1B-0676 [2] PIN  
6. 3B-4615 [2] PIN-COTTER  
7. 7F-3713 [1] ROD-CONTROL  
8. 8G-4657 [1] YOKE  
9. 5J-5315 [1] ROD END  
10. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
11. 3W-1484 [1] BRACKET AS  
12. 9B-7237 [7] BOLT (3/8-16X1.25-IN)  
13. 4D-4064 [1] ROD END (3/8-24-THD)  
14. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
15. 3W-1488 [1] SHAFT AS  
16. 8G-4650 [1] LEVER  
17. 3W-1481 [1] ROD  
18. 3W-2959 [1] COVER  
19. 7X-0578 [4] WASHER-HARD (10.2X32X2.5-MM THK)  
20. [1] FILM-INSTRUCTION (BULLDOZER LIFT)  
21. 3W-1487 [1] SUPPORT  
22. 8T-0798 [4] BEARING-ROLLER  
23. 8T-0741 [4] SEAL-LIP TYPE  
24. 6P-5208 [1] GUIDE-CONTROL  
25. 6P-5207 [1] SEAL-DOMED  
26. 7M-4914 [1] SPRING-HYD DECELERATOR  
27. 3W-1482 [1] SHAFT AS  
28. 3W-1486 [1] ROD  
29. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
 

#SEBP25900364
 

131-3056: CONTROL GP-HYDRAULIC HAND

131-3056 CONTROL GP-HYDRAULIC HAND -BLADE ANGLE
S/N 3DS1-343
PART OF 129-7609 HYDRAULIC AR-MACHINE
i00508435 SEBP2590
1313056 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3641 [3] END-ROD (5/16-24-THD)  
2. 6V-8918 [3] BOLT (5/16-18X1.25-IN)  
3. 6V-8186 [4] NUT-FULL (5/16-24-THD)  
4. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
5. 8G-4659 [1] SHAFT AS  
6. 3W-1491 [1] SUPPORT  
7. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
8. 6V-8801 [1] NUT (3/8-16-THD)  
9. 3R-7116 [1] ROD-CONTROL  
10. 3W-1495 [1] LEVER  
11. 1B-0676 [3] PIN  
12. 3B-4615 [3] PIN-COTTER  
13. 4J-2701 [1] ROD END  
14. 031-4155 [3] LOCKNUT (5/16-18-THD)  
15. 3B-4617 [1] PIN-COTTER  
16. 2H-2292 [1] ROD-ADJUSTMENT  
17. 8T-0798 [8] BEARING-ROLLER  
18. 134-2622 [1] LEVER AS  
19. 7F-3713 [1] ROD-CONTROL  
20. 3W-1493 [1] LEVER  
21. 3W-2960 [1] SHAFT AS  
22. 9B-7237 [7] BOLT (3/8-16X1.25-IN)  
23. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 8T-4122 [5] WASHER-HARD (17X32X3.5-MM THK)  
25. 8T-0741 [8] SEAL-LIP TYPE  
26. 1B-8704 [1] KEY-WOODRUFF  
27. 3W-1492 [1] LEVER  
28. 8T-8908 [1] BOLT (1/4-20X1-IN)  
29. 6V-8185 [1] NUT (1/4-20-THD)  
30. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 134-2621 [1] PLATE  
32. 7S-5757 [1] RING-RETAINING  
33. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
34. 8E-1370 [1] WASHER-THRUST  
35. 8G-4680 [1] YOKE  
 

#SEBP25900365
 

137-2107: CONTROL GP-JOYSTICK

137-2107 CONTROL GP-JOYSTICK -SWING BOOM
S/N 3DS1-UP
PART OF 133-7610 LINES GP-GRAPPLE
AN ATTACHMENT
i00505997 SEBP2590
1372107 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-8857 [1] BOOT  
2. 142-0269 [1] FILM-INSTRUCTION (GRAPPLE CONTROL)  
3. 135-4573 [1] PLATE  
4. 124-7517 [3] SCREW  
5. 135-4576 [2] BUTTON  
6. 135-4882 [1] SWITCH AS-CONTROL (BOOM SWING LEFT)  
6A. 135-4882 [1] SWITCH AS-CONTROL (BOOM SWING RIGHT)  
7. 137-4112 [1] SWITCH AS-CONTROL (GRAPPLE TONG OPEN, CLOSE)  
7A. 137-4112 [1] SWITCH AS-CONTROL (GRAPPLE ROTATION)  
8. 137-4151 [1] SCREW  
9. 137-4152 [1] GASKET  
10. 137-4153 [2] BUTTON  
11. 137-5234 [1] CABLE AS  
12. 137-5235 [2] HOUSING  
 

#SEBP25900366
 

8G-4330: CONTROL GP-STEER CLUTCH & BRK

8G-4330 CONTROL GP-STEER CLUTCH & BRK
S/N 3DS1-UP; BDW1-UP
PART OF 132-0285, 132-0286, 152-3012 CAB AR-OPEN ROPS
AN ATTACHMENT
i00420874 SEBP2590
8G4330 CONTROL GP-STEER CLUTCH & BRK Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-5317 [2] BUMPER  
  6V-8189 [2] NUT (5/16-18-THD)  
2. 3W-1447 [1] LEVER  
3. 3W-8484 [1] LEVER  
4. 5J-5315 [4] ROD END  
5. 9M-4707 [1] ROD  
6. 3W-8483 [1] LEVER  
7. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
8. 1B-8706 [3] KEY-WOODRUFF  
9. 3S-2713 [6] NUT-FULL (3/8-24-THD)  
10. 113-8460 [1] ROD  
11. 5P-2566 [1] BOLT (1/2-13X1.5-IN)  
12. 8T-2501 [1] BOLT (3/8-16X2-IN)  
  2K-4973 [1] LOCKNUT (3/8-16-THD)  
13. 9M-4461 [1] ROD END  
14. 3W-1446 [1] LEVER  
15. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
16. 8T-4835 [1] BOLT (1/2-13X2-IN)  
17. 8G-5189 [1] SUPPORT  
18. 1K-4705 [2] WASHER  
19. 1T-0720 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
20. 8G-5190 [1] SHAFT AS  
21. 8G-5193 [1] SHAFT  
22. 8T-1177 [2] BEARING-ROLLER  
23. 8T-1173 [2] SEAL-LIP TYPE  
24. 8T-1175 [2] SEAL-LIP TYPE  
25. 090-3178 [2] BEARING-ROLLER  
26. 1B-8702 [2] KEY-WOODRUFF  
27. 2Y-5671 [2] WASHER (19.43X33X0.91-MM THK)  
28. 8P-7824 [2] KNOB  
29. 030-7573 [2] BOLT (3/8-16X1.5-IN)  
30. 8P-7826 [2] KNOB  
31. 3W-8485 [1] LEVER  
32. 3W-8486 [1] LEVER  
33. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
34. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
35. 2L-6267 [4] LOCKNUT (3/8-24-THD)  
36. 1B-0676 [1] PIN  
  3B-4617 [1] PIN-COTTER  
37. 3D-9912 [1] ROD-CONTROL  
38. 4D-4064 [1] ROD END (3/8-24-THD)  
  7X-3174 [1] BOLT (3/8-24X1.375-IN)  
39. 3W-1448 [1] SHAFT  
40. 8T-1178 [2] BEARING-ROLLER  
  8T-1174 [2] SEAL-LIP TYPE  
41. 7X-0291 [4] BOLT (3/8-16X3.75-IN)  
42. 8M-5254 [6] SEAL-O-RING  
43. 1B-8714 [2] KEY-WOODRUFF  
44. 3W-1449 [1] SUPPORT  
45. 9S-1328 [2] WASHER (26X41X1.6-MM THK)  
46. 3T-6498 Y [1] VALVE GP-STEERING & BRAKE CONT  
47. 4L-6454 [4] BOLT (3/8-16X1-IN)  
48. 3W-8487 [1] LEVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900367
 

135-2673: CONTROL GP-TRANSMISSION

135-2673 CONTROL GP-TRANSMISSION
S/N 3DS1-UP; BDW1-UP
PART OF 132-0285, 132-0286, 152-3012 CAB AR-OPEN ROPS
AN ATTACHMENT
i00496022 SEBP2590
1352673 CONTROL GP-TRANSMISSION Parts scheme 1352673 CONTROL GP-TRANSMISSION Parts scheme 1352673 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1581 [1] SWITCH AS-NEUTRAL START  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
2. 7M-0706 [1] KNOB  
3. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
4. 8E-5568 [1] ROD AS  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  3B-4605 [1] PIN-COTTER  
6. 1J-4384 [1] PIN-CLEVIS  
  3B-4615 [1] PIN-COTTER  
7. 8G-6755 [1] BRACKET AS  
8. 4L-6454 [3] BOLT (3/8-16X1-IN)  
9. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 4H-0408 [1] PLUG-PROTECTION (10-MM)  
11. 3W-3598 [1] LEVER  
12. 2M-8908 [1] KNOB  
13. 9G-0742 [1] BOOT  
14. 1A-9252 [1] END-ADJUSTMENT ROD  
15. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
16. 1B-8701 [1] KEY-WOODRUFF  
  8G-8127 [1] LEVER  
17. 135-7834 [1] LINK AS  
  3S-2713 [2] NUT-FULL (3/8-24-THD)  
  4D-4064 [1] ROD END (3/8-24-THD)  
  5J-5315 [1] ROD END  
  8G-6770 [1] ROD  
18. 135-7833 [1] LINK AS  
  3S-2713 [2] NUT-FULL (3/8-24-THD)  
  4D-4064 [1] ROD END (3/8-24-THD)  
  5J-5315 [1] ROD END  
  7G-1520 [1] ROD  
19. 8G-6723 [1] COVER AS  
20. 8T-1177 [4] BEARING-ROLLER  
  8F-7702 [4] SEAL-LIP TYPE  
21. 1K-0485 [2] WASHER (19.4X34.9X2.5-MM THK)  
22. 2K-4973 [3] LOCKNUT (3/8-16-THD)  
  5S-7382 [3] BOLT (3/8-16X1.375-IN)  
23. 8E-7005 [1] HARNESS AS  
24. 135-7837 [1] LINK AS  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  105-3223 [1] ROD  
  1B-4203 [2] NUT-FULL (3/8-24-THD)  
  9W-9687 [2] STUD  
25. 9D-3769 [1] GROMMET  
26. 9G-9150 [1] CLIP  
27. 8G-6732 [1] LEVER AS  
28. 8T-8919 [1] BOLT (1/2-13X1.75-IN)  
  1K-6872 [1] LOCKNUT (1/2-13-THD)  
29. 8L-8413 [1] STRAP-CABLE (WHITE)  
30. 4S-4465 [4] SCREW-TRUSS HEAD (1/4-20X0.625-IN)  
31. 8G-6731 [1] GUIDE  
32. 8T-9364 [3] BOLT (1/4-20X0.625-IN)  
  5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
33. 8E-5571 [1] BRACKET  
34. 5B-2183 [1] NUT-JAM (9/16-18-THD)  
  8T-8614 [1] RING-LOCK  
35. 8G-6711 [1] LEVER AS  
  4K-3893 [1] BUSHING  
36. 4H-0407 [1] PLUG-PROTECTION  
37. 1B-8706 [2] KEY-WOODRUFF  
  5S-7383 [2] BOLT (3/8-16X1.75-IN)  
  6V-8801 [2] NUT (3/8-16-THD)  
  7P-3006 [2] LEVER  
38. 8G-6716 [1] SUPPORT  
39. 8T-1177 [4] BEARING-ROLLER  
  8F-7702 [4] SEAL-LIP TYPE  
40. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
41. 8T-4896 [26] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 1K-0485 [4] WASHER (19.4X34.9X2.5-MM THK)  
43. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
44. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
45. 5K-7638 [1] ROD-CONTROL  
46. 8G-6017 [1] SUPPORT  
47. 4L-6454 [23] BOLT (3/8-16X1-IN)  
48. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
49. 3W-3263 [1] LINK AS  
  5J-5315 [1] ROD END  
  6V-8183 [1] NUT-FULL (3/8-24-THD)  
50. 8G-6727 [1] LEVER AS  
51. 003-8535 [1] BUSHING-TERMINAL  
52. 1S-1150 [1] SPACER (0.391X0.5X0.19-IN THK)  
53. 034-3557 [1] BOLT-LOCKING (3/8-16X1.125-IN)  
54. 8G-6737 [1] LEVER AS  
55. 3T-7713 [1] GASKET  
56. 3S-6956 [1] ROD  
57. 4H-0408 [2] PLUG-PROTECTION (10-MM)  
58. 8G-6713 [1] YOKE AS  
  5B-0639 [1] WASHER (19.5X38.1X6-MM THK)  
59. 5H-9899 [1] RING-RETAINING (EXTERNAL)  
60. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
61. 4D-4064 [2] ROD END (3/8-24-THD)  
62. 5J-5315 [2] ROD END  
63. 3W-3110 [3] LOCK PIN  
64. 8G-6717 [2] BELLCRANK  
65. 8T-1177 [4] BEARING-ROLLER  
  8F-7702 [4] SEAL-LIP TYPE  
66. 4K-5175 [1] BOLT-12 POINT HEAD (1/2-13X1.5-IN)  
67. 1K-0485 [4] WASHER (19.4X34.9X2.5-MM THK)  
68. 5J-5315 [1] ROD END  
69. 6Y-8522 [1] ROD  
70. 6V-8183 [6] NUT-FULL (3/8-24-THD)  
71. 4D-4064 [3] ROD END (3/8-24-THD)  
72. 1B-8706 [2] KEY-WOODRUFF  
  5S-7383 [2] BOLT (3/8-16X1.75-IN)  
  6V-8801 [2] NUT (3/8-16-THD)  
  7P-3006 [2] LEVER  
73. 5K-1827 [1] ROD  
74. 8G-6719 [1] BRACKET AS  
75. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
  5S-7382 [1] BOLT (3/8-16X1.375-IN)  
76. 8G-6718 [1] SHAFT  
77. 1J-4384 [2] PIN-CLEVIS  
  3B-4615 [2] PIN-COTTER  
78. 3W-3507 [1] BUSHING  
79. 8G-6740 [1] BRACKET AS  
80. 4L-6454 [4] BOLT (3/8-16X1-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
81. 4M-7680 [1] PIN  
82. 3B-4617 [2] PIN-COTTER  
83. 4M-8799 [1] SPRING  
84. 8G-6745 [1] LEVER AS  
85. 6V-8185 [1] NUT (1/4-20-THD)  
86. 8G-6751 [1] ADAPTER  
87. 3H-1977 [1] PIN-CLEVIS  
88. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
89. 8G-8125 [1] SUPPORT  
  8T-1172 [2] SEAL-LIP TYPE  
  8T-1176 [2] BEARING-ROLLER  
90. 6Y-7901 [1] LEVER AS  
91. 6Y-7905 [1] ROD  
92. 1M-1341 [2] END-YOKE ROD  
 

#SEBP25900368
 

9N-4236: GAUGE & WARNING GP

9N-4236 GAUGE & WARNING GP
S/N 3DS1-UP; BDW1-UP
PART OF 132-0285, 132-0286, 152-3012 CAB AR-OPEN ROPS
AN ATTACHMENT
i00437498 SEBP2590
9N4236 GAUGE & WARNING GP Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3623 [1] WIRE AS  
2. 7X-2058 [3] LAMP (24-VOLT)  
3. 4W-0485 [1] GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER, 24-VOLT)  
  3L-8187 [3] LOCKWASHER  
  4B-2043 [2] NUT (8-32-THD)  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-8368 [3] NUT (6-32-THD)  
  9B-7233 [2] LOCKWASHER  
4. 9G-9152 [1] CLIP  
5. 6Y-7371 [1] HARNESS AS  
6. 4W-0483 [1] GAUGE GP-COOLANT TEMPERATURE (24-VOLT)(ENGINE)  
  3L-8187 [3] LOCKWASHER  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-8368 [3] NUT (6-32-THD)  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
7. 116-4684 [1] GAUGE GP-FUEL LEVEL (24-VOLT)  
  3L-8187 [3] LOCKWASHER  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-8368 [3] NUT (6-32-THD)  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
 

#SEBP25900369
 

134-9653: HEATER GP-CAB

134-9653 HEATER GP-CAB -OPEN ROPS
S/N 3DS1-UP; BDW1-UP
AN ATTACHMENT
i00919148 SEBP2590
1349653 HEATER GP-CAB Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-8961 [1] GUARD AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
2. 8E-8544 [1] PLATE AS  
  1F-0750 [4] NUT-WELD (3/8-16-THD)  
3. 136-1591 [1] PLATE (RH)  
4. 6Y-3416 [1] HARNESS AS  
5. 8E-8539 [1] SHIELD AS  
  1F-0750 [3] NUT-WELD (3/8-16-THD)  
6. 8K-1433 [2] GROMMET  
7. 3K-9520 [2] GROMMET  
8. 7X-1999 Y [1] HEATER GP-CAB (OPEN ROPS)  
9. 6V-8801 [4] NUT (3/8-16-THD)  
10. 4L-6454 [17] BOLT (3/8-16X1-IN)  
11. 5P-1075 [21] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 6B-4661 [1] BUSHING-REDUCER  
13. 8F-8151 [1] VALVE-SHUTOFF  
14. 8S-0948 [2] CLIP  
15. 004-6810 [1] ELBOW  
16. 2V-0099 [1] KNOB-CONTROL  
17. 7G-8699 [1] VALVE-WATER  
18. 5D-1026 [4] CLAMP-BAND  
19. 136-2038 [1] DOOR AS  
  1F-0750 [6] NUT-WELD (3/8-16-THD)  
20. 135-7065 [1] WINDOW  
21. 135-7064 [1] PLATE AS  
  8T-3612 M [7] NUT-WELD (M8X1.25-THD)  
22. 136-2043 [1] FRAME AS (RH)  
  1F-0750 [7] NUT-WELD (3/8-16-THD)  
  5H-9394 [5] BOSS (1/2-13X1-IN)  
23. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
    -OR-
24. 6D-4636 [1] CLIP (LOOP)  
  5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 527 :

CONTROL GP-HANDLE
137-2106 CONTROL GP-HANDLE
CONTROL GP-DECELERATOR
8G-3913 CONTROL GP-DECELERATOR
152-3012 CAB AR-OPEN ROPS
132-0286 CAB AR-OPEN ROPS
132-0285 CAB AR-OPEN ROPS
TRUNNION GP-BULLDOZER
140-9489 TRUNNION GP-BULLDOZER
SINGLETREE GP
8E-2796 SINGLETREE GP
206-7786 INSTALLATION AR-BULLDOZER
CONTROL GP-HYDRAULIC
133-7378 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
133-7381 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
141-9924 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
131-3056 CONTROL GP-HYDRAULIC HAND
CONTROL GP-JOYSTICK
137-2107 CONTROL GP-JOYSTICK
CONTROL GP-STEER CLUTCH & BRK
8G-4330 CONTROL GP-STEER CLUTCH & BRK
CONTROL GP-TRANSMISSION
135-2673 CONTROL GP-TRANSMISSION
GAUGE & WARNING GP
9N-4236 GAUGE & WARNING GP

Truck sale:

Caterpillar 527, skidder, Forestry equipment
173,742 
Caterpillar 527, skidder, Forestry equipment
- skidder
FINNING CANADA
Caterpillar 527GROEM, skidder, Forestry equipment
369,700 
Caterpillar 527GROEM, skidder, Forestry equipment
- skidder
PETERSON CAT
Caterpillar 527, Forestry Equipment
195,000 USD 
Caterpillar 527, Forestry Equipment
- skidder
WESTERN STATES EQUIPMENT
Caterpillar 527GR, Forestry Equipment
209,122 
Caterpillar 527GR, Forestry Equipment
- skidder
FINNING CANADA
Canada
Caterpillar 527, Forestry Equipment
 
Caterpillar 527, Forestry Equipment
- skidder
PETERSON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.