AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-9046 KICKOUT & POSITIONER GP S/N 8TN1-924; 1FR1-1415 PART OF 107-3313 LOADER AR 436C BACKHOE LOADER


HYDRAULIC SYSTEM
KICKOUT & POSITIONER GP
LINES GP-AUXILIARY
CYLINDER GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
HYDRAULIC SYSTEM
LINES GP-AUXILIARY

BACKHOE LOADER 436C BACKHOE LOADER 1FR
 436C Backhoe Loader Center Pivot, Single Tilt 1FR00001-01415 (MACHINE) POWERED BY 3054 Engine SEBP2599 436C 1FR   (1996)

HYDRAULIC SYSTEM

KICKOUT & POSITIONER GP
WIRING GP-KICKOUT & POSITIONER
122-1645 WIRING GP-KICKOUT & POSITIONER
KICKOUT & POSITIONER GP
106-9046 KICKOUT & POSITIONER GP
 

#SEBP25990380
 

106-9046: KICKOUT & POSITIONER GP

106-9046 KICKOUT & POSITIONER GP
S/N 8TN1-924; 1FR1-1415
PART OF 107-3313 LOADER AR
i00200839 SEBP2599
1069046 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-7797 [1] PLATE  
2. 9R-3255 [1] LEVER  
3. 128-7902 [1] SPACER (60.25X75X6-MM THK)  
4. 9R-5301 [2] PIN-COTTER  
5. 135-9420 [1] PIVOT  
6. 140-6009 [1] LEVER AS  
7. 9R-9146 [1] PIPE AS  
8. 128-7905 [3] SPACER (61X114.3X1-MM THK)  
9. 128-7903 [3] SPACER (61X114.3X3-MM THK)  
10. 1B-0676 [1] PIN  
11. 5P-0372 [1] LOCK PIN  
12. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
13. 8T-0706 [1] RING-RETAINING  
14. 3C-8727 [1] SPRING  
15. 9R-2806 [2] PIN  
16. 9R-2807 [4] CLIP (RETAINER)  
17. 8T-5063 [1] ROD END  
18. 8T-4133 M [2] NUT (M10X1.5-THD)  
19. 8C-6955 [1] END-YOKE ROD  
20. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
21. 130-5774 [1] LINK AS  
22. 130-7952 [1] PLATE  
23. 8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
24. 1B-8736 [1] KEY-WOODRUFF  
25. 112-5494 [1] LEVER AS  
  7Y-0336 [1] SPACER (24.5X44X24-MM THK)  
26. 9R-2614 [1] BEARING  
27. 106-7301 [1] ROD AS  
28. 2Y-5829 M [1] NUT (M10X1.5-THD)  
29. 130-5891 [1] LEVER AS  
  7Y-0336 [1] SPACER (24.5X44X24-MM THK)  
30. 9R-3135 [1] PIN  
31. 9R-2614 [1] BEARING  
32. 8C-3274 [1] FILM-IDENTIFICATION (BUCKET)  
  M   METRIC PART
 

#SEBP25990381
 

135-7198: KIT-AUXILIARY LINES

135-7198 KIT-AUXILIARY LINES
S/N 8TN1-924; 1FR1-1415
FIELD INSTALLATION
AN ATTACHMENT
i00617012 SEBP2599
1357198 KIT-AUXILIARY LINES Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7709 [1] TUBE AS  
2. 5P-7466 [1] CLIP (SLOT)  
3. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
4. 7S-3916 [1] CLIP (TAB)  
5. 7S-3919 [1] CLIP (SLOT)  
6. 5P-7467 [1] CLIP (TAB)  
7. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 5P-8112 [1] GROMMET  
10. 8W-5149 I [1] HOSE AS  
11. 123-7637 [2] CAP  
12. 148-8317 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-8714 [1] CONNECTOR  
13. 150-3054 [1] CONNECTOR AS  
  5K-9090 [3] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  109-2953 [1] CONNECTOR  
14. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
15. 107-6708 [1] BRACKET  
16. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
17. 150-3052 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  107-6709 [1] CONNECTOR  
18. 109-1260 [1] BRACKET  
19. 148-8386 [1] ELBOW AS  
  3E-7426 [1] ELBOW  
  5K-9090 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
20. 5P-7468 [1] CLIP (SLOT)  
21. 5P-7469 [1] CLIP (TAB)  
22. 5P-8444 [1] GROMMET (37-MM ID)  
23. 124-7633 [1] TUBE AS  
24. 110-7710 [1] TUBE AS  
25. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
26. 106-0409 I [1] HOSE AS  
27. 8S-0023 [1] CLIP (SLOT)  
28. 8S-0024 [1] CLIP (TAB)  
29. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
30. 5K-9090 [2] SEAL-O-RING  
31. 148-8450 [1] TEE AS  
  3E-7443 [1] TEE-UNION  
  5K-9090 [1] SEAL-O-RING  
  6V-9746 [2] SEAL-O-RING  
32. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  8T-2363 [1] TEE-UNION  
33. 150-3053 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  108-3872 [1] CONNECTOR  
34. 6V-9172 [2] NUT (1-7/16-12-THD)  
35. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
36. 6V-9746 [2] SEAL-O-RING  
37. 6V-9832 [1] CAP  
38. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
39. 106-0594 I [1] HOSE AS  
40. 8T-1889 [1] CLIP (SLOT)  
41. 106-0411 [2] BLOCK  
42. 106-0412 [2] BLOCK  
43. 106-0413 [2] BLOCK  
44. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
46. 106-0414 [1] BLOCK  
47. 106-0415 [1] BLOCK  
48. 106-0416 [1] BLOCK  
49. 106-0425 [1] PLATE AS (WORK TOOL REST)  
50. 123-3201 [1] TUBE AS  
51. 8T-1890 [1] CLIP (TAB)  
52. 8T-1891 [1] CLIP (SLOT)  
53. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
54. 101-0863 [2] FILM-INSTRUCTION (RETURN FLOW)  
55. 8T-1892 [1] CLIP (TAB)  
56. 159-1550 I [1] HOSE AS  
57. 160-2247 G SLEEVE-ABRASION (40.95 INCHES)  
58. 096-0061 [4] STRAP-CABLE  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25990382
 

135-7199: KIT-AUXILIARY LINES

135-7199 KIT-AUXILIARY LINES
S/N 8TN1-924; 1FR1-1415
AN ATTACHMENT
i00742869 SEBP2599
1357199 KIT-AUXILIARY LINES Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7709 [1] TUBE AS  
2. 5P-7466 [1] CLIP (SLOT)  
3. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
4. 7S-3916 [1] CLIP (TAB)  
5. 7S-3919 [1] CLIP (SLOT)  
6. 5P-7467 [1] CLIP (TAB)  
7. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 5P-8112 [1] GROMMET  
10. 8W-5149 I [1] HOSE AS  
11. 123-7637 [2] CAP  
12. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
13. 107-6708 [1] BRACKET  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 109-1260 [1] BRACKET  
16. 5P-7468 [1] CLIP (SLOT)  
17. 5P-7469 [1] CLIP (TAB)  
18. 5P-8444 [1] GROMMET (37-MM ID)  
19. 124-7633 [1] TUBE AS  
20. 110-7710 [1] TUBE AS  
21. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
22. 106-0409 I [1] HOSE AS  
23. 8S-0023 [1] CLIP (SLOT)  
24. 8S-0024 [1] CLIP (TAB)  
25. 5K-9090 [2] SEAL-O-RING  
26. 6V-9172 [2] NUT (1-7/16-12-THD)  
27. 6V-9746 [2] SEAL-O-RING  
28. 6V-9832 [1] CAP  
29. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
30. 106-0594 I [1] HOSE AS  
31. 8T-1889 [1] CLIP (SLOT)  
32. 106-0411 [2] BLOCK  
33. 106-0412 [2] BLOCK  
34. 106-0413 [2] BLOCK  
35. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
36. 106-0425 [1] PLATE AS (WORK TOOL REST)  
37. 106-0414 [1] BLOCK  
38. 106-0415 [1] BLOCK  
39. 106-0416 [1] BLOCK  
40. 123-3201 [1] TUBE AS  
41. 8T-1890 [1] CLIP (TAB)  
42. 8T-1891 [1] CLIP (SLOT)  
43. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
44. 101-0863 [2] FILM-INSTRUCTION (RETURN FLOW)  
45. 8T-1892 [1] CLIP (TAB)  
46. 159-1550 I [1] HOSE AS  
47. 148-8317 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-8714 [1] CONNECTOR  
48. 150-3054 [1] CONNECTOR AS  
  5K-9090 [3] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  109-2953 [1] CONNECTOR  
49. 150-3052 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  107-6709 [1] CONNECTOR  
50. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
51. 148-8450 [1] TEE AS  
  3E-7443 [1] TEE-UNION  
  5K-9090 [1] SEAL-O-RING  
  6V-9746 [2] SEAL-O-RING  
52. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
53. 148-8386 [1] ELBOW AS  
  3E-7426 [1] ELBOW  
  5K-9090 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
54. 150-3053 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  108-3872 [1] CONNECTOR  
55. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
56. 160-2247 SLEEVE-ABRASION (40.95 INCHES)  
57. 096-0061 [4] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25990383
 

135-7200: KIT-AUXILIARY LINES

135-7200 KIT-AUXILIARY LINES
S/N 8TN1-924; 1FR1-1415
FIELD INSTALLATION
AN ATTACHMENT
i00604121 SEBP2599
1357200 KIT-AUXILIARY LINES Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-7637 [2] CAP  
2. 123-3201 [1] TUBE AS  
3. 110-7709 [1] TUBE AS  
4. 5P-7466 [1] CLIP (SLOT)  
5. 5P-7469 [1] CLIP (TAB)  
6. 5P-8112 [1] GROMMET  
7. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
8. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
9. 6V-8400 [2] SEAL-O-RING  
10. 108-3872 [1] CONNECTOR  
11. 5K-9090 [11] SEAL-O-RING  
12. 6V-9746 [8] SEAL-O-RING  
13. 109-2953 [1] CONNECTOR  
14. 109-1260 [1] BRACKET  
15. 106-0425 [1] PLATE AS (WORK TOOL REST)  
16. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
18. 7S-3916 [1] CLIP (TAB)  
19. 7S-3919 [1] CLIP (SLOT)  
20. 159-1550 I [1] HOSE AS  
21. 6V-9854 [2] ELBOW (SWIVEL)  
22. 106-0594 I [1] HOSE AS  
23. 5P-7467 [1] CLIP (TAB)  
24. 5P-7468 [1] CLIP (SLOT)  
25. 8T-1891 [1] CLIP (SLOT)  
26. 8T-1892 [1] CLIP (TAB)  
27. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
28. 3E-7443 [1] TEE-UNION  
29. 3E-7426 [1] ELBOW  
30. 106-0409 I [1] HOSE AS  
31. 5P-8444 [1] GROMMET (37-MM ID)  
32. 6V-9172 [2] NUT (1-7/16-12-THD)  
33. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
34. 6V-9855 [1] ELBOW  
35. 110-7710 [1] TUBE AS  
36. 8S-0023 [1] CLIP (SLOT)  
37. 8S-0024 [1] CLIP (TAB)  
38. 106-0411 [2] BLOCK  
39. 106-0412 [2] BLOCK  
40. 106-0413 [2] BLOCK  
41. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
42. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
43. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
44. 106-0414 [1] BLOCK  
45. 106-0415 [1] BLOCK  
46. 106-0416 [1] BLOCK  
47. 8W-5149 I [1] HOSE AS  
48. 6V-8714 [1] CONNECTOR  
49. 3D-2824 [1] SEAL-O-RING  
50. 124-7633 [1] TUBE AS  
51. 101-0863 [2] FILM-INSTRUCTION (RETURN FLOW)  
52. 7M-8485 [3] SEAL-O-RING  
53. 6V-8398 [1] SEAL-O-RING  
54. 6V-9853 [1] ELBOW  
55. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
56. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
57. 106-0843 [1] TUBE AS  
58. 8T-1889 [1] CLIP (SLOT)  
59. 110-7713 [1] TUBE AS  
60. 8T-1890 [1] CLIP (TAB)  
61. 107-6709 [1] CONNECTOR  
62. 107-6708 [1] BRACKET  
63. 096-0061 [2] STRAP-CABLE  
64. 130-3161 SLEEVE-ABRASION (68CM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25990384
 

119-3362: KIT-LOAD CONTROL

119-3362 KIT-LOAD CONTROL
S/N 8TN1-924; 1FR1-1415
PART OF 136-6518 CONTROL AR-LIFT & TILT LOAD
Type 1
i00200903 SEBP2599
1193362 KIT-LOAD CONTROL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-6738 [4] CLAMP-HOSE  
2. 9T-5454 Y [2] VALVE GP-LOAD CONTROL  
3. 124-3555 [1] TUBE AS  
4. 124-3556 [1] TUBE AS  
5. 124-3557 [1] TUBE AS  
6. 124-3558 [1] TUBE AS  
7. 124-3559 I [2] HOSE AS  
8. 124-3560 I [1] HOSE AS  
9. 124-3561 I [1] HOSE AS  
10. 124-3563 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
11. 124-3564 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 2M-9780 [8] SEAL-O-RING  
13. 6V-8398 [8] SEAL-O-RING  
14. 6V-8638 [4] CONNECTOR  
15. 6V-8642 [4] CONNECTOR  
16. 7J-9108 [8] SEAL-O-RING  
17. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25990385
 

119-3362: KIT-LOAD CONTROL

119-3362 KIT-LOAD CONTROL
S/N 8TN1-924; 1FR1-1415
PART OF 136-6518 CONTROL AR-LIFT & TILT LOAD
Type 2
i00720747 SEBP2599
1193362 KIT-LOAD CONTROL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7982 C [2] ELBOW (9/16-18-THD)  
2. 6V-0405 C [4] SEAL-BONDED  
3. 7X-3163 C [1] ADAPTER-SWIVEL  
4. 8T-1674 C [1] TEE  
5. 9M-6738 [4] CLAMP-HOSE  
6. 124-3555 [1] TUBE AS  
7. 124-3556 [1] TUBE AS  
8. 124-3557 [1] TUBE AS  
9. 124-3558 [1] TUBE AS  
10. 124-3559 I [2] HOSE AS  
11. 124-3560 I [1] HOSE AS  
12. 124-3561 I [1] HOSE AS  
13. 124-3563 [1] BRACKET AS  
14. 124-3564 [1] BRACKET AS  
15. 144-6300 CY [2] VALVE GP-LOAD CONTROL  
16. 144-8311 C [2] ADAPTER  
17. 145-0227 C [2] FUSE  
18. 145-1037 CI [1] HOSE AS  
19. 145-1038 CI [1] HOSE AS  
20. 145-1039 CI [1] HOSE AS  
21. 2M-9780 [8] SEAL-O-RING  
22. 3J-1907 C [3] SEAL-O-RING  
23. 3J-7354 C [2] SEAL-O-RING  
24. 4J-5477 C [4] SEAL-O-RING  
25. 5K-9090 C [1] SEAL-O-RING  
26. 6V-8397 C [6] SEAL-O-RING  
27. 6V-8398 [8] SEAL-O-RING  
28. 6V-8638 [4] CONNECTOR  
29. 6V-8642 [4] CONNECTOR  
30. 6V-8647 C [2] CONNECTOR  
31. 6V-9849 C [2] ELBOW  
32. 7J-9108 [8] SEAL-O-RING  
33. 7M-8485 C [1] SEAL-O-RING  
34. 7X-3406 C [1] ADAPTER-CROSS  
35. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25990386
 

119-8322: KIT-SEAL

119-8322 KIT-SEAL
S/N 8TN1-924
HYDRAULIC (.30 OVERSIZE)
FOR USE WITH 116-4366 CYLINDER GP-STABILIZER, 116-4368 CYLINDER GP-STABILIZER
FIELD INSTALLATION
i00200669 SEBP2599
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4T-6128 [1] RING  
  1K-7098 [1] RING-BACKUP  
  8T-8311 [1] RING-WEAR  
  2H-3934 [1] SEAL-O-RING  
  4T-6126 [1] SEAL-U-CUP  
  8T-8227 [1] SEAL AS  
  9X-3568 [1] SEAL AS  
  9X-3567 [1] SEAL-LIP TYPE  
 

#SEBP25990387
 

8Y-7474: LINES GP-BACKHOE

8Y-7474 LINES GP-BACKHOE
S/N 8TN1-924; 1FR1-1415
PART OF 143-1800, 8Y-7466 HYDRAULIC AR
i00200754 SEBP2599
8Y7474 LINES GP-BACKHOE Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-7533 [1] TUBE AS  
2. 113-7874 [1] TUBE AS  
3. 113-7875 [1] TUBE AS  
4. 113-7876 [1] TUBE AS  
5. 116-2299 [1] TUBE AS  
6. 116-2300 [1] TUBE AS  
7. 3D-2824 [6] SEAL-O-RING  
8. 6V-8398 [2] SEAL-O-RING  
9. 6V-8637 [6] CONNECTOR  
10. 6V-9746 [8] SEAL-O-RING  
11. 7J-9108 [2] SEAL-O-RING  
12. 8T-1887 [6] CLIP (SLOT)  
13. 8T-1888 [6] CLIP (TAB)  
14. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP25990388
 

121-8347: LINES GP-BACKHOE AUXILIARY

121-8347 LINES GP-BACKHOE AUXILIARY
S/N 8TN1-924; 1FR1-1415
PART OF 121-8301, 121-8302, 121-8306 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
i00201128 SEBP2599
1218347 LINES GP-BACKHOE AUXILIARY Parts scheme 1218347 LINES GP-BACKHOE AUXILIARY Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9007 [1] ELBOW  
1A. 3D-2824 [1] SEAL-O-RING  
1B. 6V-9746 [1] SEAL-O-RING  
2. 9R-2075 I [2] HOSE AS  
3. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
4. 110-7713 [1] TUBE AS  
5. 117-0646 [1] TUBE AS  
6. 5P-7465 [5] CLIP (TAB)  
7. 9R-9284 I [1] HOSE AS  
8. 9R-9285 I [1] HOSE AS  
9. 6V-9169 [1] NUT (13/16-16-THD)  
11. 5K-9090 [2] SEAL-O-RING  
12. 6V-9746 [4] SEAL-O-RING  
13. 6V-1249 [5] GROMMET (22-MM ID)  
14. 5P-7464 [5] CLIP (SLOT)  
15. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
16. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 106-0849 [1] TUBE AS  
18. 9R-1005 [6] CLIP (SLOT)  
19. 9R-1004 [6] CLIP (TAB)  
20. 159-1550 I [1] HOSE AS  
21. 6V-9854 [2] ELBOW (SWIVEL)  
21A. 5K-9090 [2] SEAL-O-RING  
22. 106-0594 I [1] HOSE AS  
23. 5P-7467 [4] CLIP (TAB)  
24. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-1891 [1] CLIP (SLOT)  
26. 8T-1892 [1] CLIP (TAB)  
27. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
28. 3E-7443 [1] TEE-UNION  
28A. 5K-9090 [1] SEAL-O-RING  
28B. 6V-9746 [2] SEAL-O-RING  
29. 3E-7426 [1] ELBOW  
29A. 5K-9090 [1] SEAL-O-RING  
29B. 6V-8400 [1] SEAL-O-RING  
30. 9R-9253 [1] PLATE  
31. 6V-9853 [1] ELBOW  
31A. 6V-9746 [1] SEAL-O-RING  
32. 6V-9172 [2] NUT (1-7/16-12-THD)  
33. 2P-1293 [3] LOCKNUT (1-3/16-12-THD)  
34. 6V-9855 [1] ELBOW  
34A. 6V-8400 [1] SEAL-O-RING  
35. 7J-9108 [2] SEAL-O-RING  
36. 6V-8398 [8] SEAL-O-RING  
37. 117-0645 [1] TUBE AS  
38. 106-0411 [2] BLOCK  
39. 106-0412 [2] BLOCK  
40. 106-0413 [2] BLOCK  
41. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
42. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
43. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
44. 106-0414 [1] BLOCK  
45. 106-0415 [1] BLOCK  
46. 106-0416 [1] BLOCK  
47. 124-7633 [1] TUBE AS  
48. 6V-8714 [1] CONNECTOR  
48A. 3D-2824 [1] SEAL-O-RING  
48B. 5K-9090 [1] SEAL-O-RING  
49. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
50. 123-3201 [1] TUBE AS  
51. 5P-7466 [4] CLIP (SLOT)  
52. 5P-8112 [4] GROMMET  
53. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
54. 123-7637 [2] CAP  
55. 107-6708 [1] BRACKET  
56. 110-7709 [1] TUBE AS  
58. 5P-7469 [1] CLIP (TAB)  
62. 107-6709 [1] CONNECTOR  
62A. 5K-9090 [1] SEAL-O-RING  
62B. 7M-8485 [1] SEAL-O-RING  
63. 108-3872 [1] CONNECTOR  
63A. 6V-9746 [1] SEAL-O-RING  
63B. 7M-8485 [1] SEAL-O-RING  
67. 109-1260 [1] BRACKET  
68. 5P-0599 [1] CLAMP-BAND  
70. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
71. 7S-3916 [1] CLIP (TAB)  
72. 7S-3919 [1] CLIP (SLOT)  
73. 9R-5948 [1] BLOCK  
74. 6V-8633 [1] CONNECTOR  
74A. 3D-2824 [1] SEAL-O-RING  
74B. 6V-8398 [1] SEAL-O-RING  
75. 8Y-7414 I [1] HOSE AS  
77. 5P-7468 [1] CLIP (SLOT)  
78. 8Y-7413 I [1] HOSE AS  
79. 103-9423 I [1] HOSE AS  
80. 8T-1890 [2] CLIP (TAB)  
81. 6V-8713 [1] CONNECTOR  
81A. 3D-2824 [1] SEAL-O-RING  
81B. 7J-9108 [1] SEAL-O-RING  
82. 116-2302 [1] TUBE AS  
83. 106-0409 I [1] HOSE AS  
84. 5P-8444 [1] GROMMET (37-MM ID)  
87. 9R-9461 [1] TUBE AS  
88. 110-7710 [1] TUBE AS  
89. 8S-0023 [1] CLIP (SLOT)  
90. 8S-0024 [1] CLIP (TAB)  
91. 8T-1889 [2] CLIP (SLOT)  
92. 106-0843 [1] TUBE AS  
94. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
103. 8W-5149 I [1] HOSE AS  
104. 101-0863 [2] FILM-INSTRUCTION (RETURN FLOW)  
106. 101-0862 [2] PLATE-WARNING (SECURE EXTENDABLE STICK)  
107. 096-0061 [2] STRAP-CABLE  
108. 130-3161 SLEEVE-ABRASION (68CM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25990389
 

121-8348: LINES GP-BACKHOE AUXILIARY

121-8348 LINES GP-BACKHOE AUXILIARY
S/N 8TN1-924; 1FR1-1415
PART OF 121-8313, 121-8314, 121-8318 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
i00201129 SEBP2599
1218348 LINES GP-BACKHOE AUXILIARY Parts scheme 1218348 LINES GP-BACKHOE AUXILIARY Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-0863 [2] FILM-INSTRUCTION (RETURN FLOW)  
2. 6V-8400 [2] SEAL-O-RING  
3. 6V-9855 [1] ELBOW  
4. 5K-9090 [6] SEAL-O-RING  
5. 110-7710 [1] TUBE AS  
6. 8S-0024 [1] CLIP (TAB)  
7. 8S-0023 [1] CLIP (SLOT)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
10. 106-0409 I [1] HOSE AS  
11. 5P-8444 [1] GROMMET (37-MM ID)  
12. 5P-7469 [1] CLIP (TAB)  
13. 5P-7468 [1] CLIP (SLOT)  
14. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
15. 6V-9172 [2] NUT (1-7/16-12-THD)  
16. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
17. 107-6708 [1] BRACKET  
18. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
19. 107-6709 [1] CONNECTOR  
20. 7M-8485 [1] SEAL-O-RING  
21. 123-7637 [1] CAP  
22. 3E-7443 [1] TEE-UNION  
23. 6V-9746 [3] SEAL-O-RING  
24. 6V-9832 [1] CAP  
25. 6V-9854 [1] ELBOW (SWIVEL)  
26. 3E-7426 [1] ELBOW  
27. 6V-8714 [1] CONNECTOR  
28. 3D-2824 [1] SEAL-O-RING  
29. 123-3201 [1] TUBE AS  
30. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
31. 8T-1891 [1] CLIP (SLOT)  
32. 8T-1892 [1] CLIP (TAB)  
33. 159-1550 I [1] HOSE AS  
34. 106-0594 I [1] HOSE AS  
35. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
36. 106-0411 [2] BLOCK  
37. 106-0412 [2] BLOCK  
38. 106-0413 [2] BLOCK  
39. 096-0061 [2] STRAP-CABLE  
40. 130-3161 E SLEEVE-ABRASION (68CM)  
41. 110-7709 [1] TUBE AS  
42. 5P-7466 [1] CLIP (SLOT)  
43. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
44. 7S-3916 [1] CLIP (TAB)  
45. 7S-3919 [1] CLIP (SLOT)  
46. 5P-7467 [1] CLIP (TAB)  
47. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 5P-8112 [1] GROMMET  
50. 8W-5149 I [1] HOSE AS  
51. 123-7637 [1] CAP  
52. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
53. 7M-8485 [1] SEAL-O-RING  
54. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
55. 8T-1890 [1] CLIP (TAB)  
56. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
57. 108-3872 [1] CONNECTOR  
58. 109-1260 [1] BRACKET  
59. 6V-9746 [2] SEAL-O-RING  
60. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
61. 8T-1889 [1] CLIP (SLOT)  
62. 106-0416 [1] BLOCK  
63. 106-0415 [1] BLOCK  
64. 106-0414 [1] BLOCK  
65. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
66. 7X-2538 M [2] BOLT (M8X1.25X100-MM)  
67. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
68. 6V-9854 [1] ELBOW (SWIVEL)  
69. 5K-9090 [2] SEAL-O-RING  
70. 124-7633 [1] TUBE AS  
71. 9S-4183 [1] PLUG (1-1/16-12-THD)  
72. 3D-2824 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Bucket Positioner
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Specifications
Bucket Positioner and Lift Kickout
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Disassembly and Assembly
Bucket Positioner & Kickdown Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Improved Lever Assembly Allows Greater Clearance {5112,7117}
1997/05/12
Correction for Specifications of the Backhoe Linkage {5109, 5112, 6506}
2000/04/03

Caterpillar Parts SIS Catalog 436C :

8Y-7466 HYDRAULIC AR
143-3944 HYDRAULIC AR
143-3943 HYDRAULIC AR
143-3942 HYDRAULIC AR
143-3941 HYDRAULIC AR
143-1800 HYDRAULIC AR
139-9418 HYDRAULIC AR
130-1245 HYDRAULIC AR
KIT-AUXILIARY LINES
135-7198 KIT-AUXILIARY LINES
KIT-AUXILIARY LINES
135-7199 KIT-AUXILIARY LINES
KIT-AUXILIARY LINES
135-7200 KIT-AUXILIARY LINES
KIT-LOAD CONTROL
119-3362 KIT-LOAD CONTROL
KIT-LOAD CONTROL
119-3362 KIT-LOAD CONTROL
119-8322 KIT-SEAL
LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
LINES GP-BACKHOE AUXILIARY
121-8347 LINES GP-BACKHOE AUXILIARY

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.