AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-5953 VALVE GP-CONTROL -BULLDOZER LIFT S/N 5WR1-UP PART OF 121-0934 VALVE GP-BANK AN ATTACHMENT D6M


HYDRAULIC SYSTEM
VALVE GP-CONTROL
VALVE GP-MAKEUP
PUMP GP
VALVE GP-RELIEF
IMPLEMENTS
BULLDOZER GP
C-FRAME GP

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 5WR
 D6M Track-Type Tractor Power Shift 5WR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2623 D6M 5WR   (1996)

HYDRAULIC SYSTEM

VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4954 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4955 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-5953 VALVE GP-CONTROL
 

#SEBP26230270
 

6E-5953: VALVE GP-CONTROL

6E-5953 VALVE GP-CONTROL -BULLDOZER LIFT
S/N 5WR1-UP
PART OF 121-0934 VALVE GP-BANK
AN ATTACHMENT
i00402261 SEBP2623
6E5953 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 1U-2744 [1] VALVE GP-CHECK (CONTROL VALVE)  
  5K-9090 [1] SEAL-O-RING  
  4T-7795 [1] RING-BACKUP  
  4K-1388 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
4. 9T-0704 [1] VALVE GP-RELIEF (LINE)(CONTROL VALVE)  
  6E-0358 [1] RING-BACKUP  
  4K-1388 [1] SEAL-O-RING  
  8C-3088 [1] SEAL-O-RING  
5. 4T-4513 [1] SPRING  
6. 100-3567 [1] HOUSING-DETENT  
7. 100-3566 [1] PISTON-DETENT  
8. 4B-9782 [1] BALL  
9. 4T-4532 [1] HOUSING  
10. 144-4277 [1] SHAFT AS-DETENT  
11. 100-3564 [1] SPRING  
12. 4T-4521 [2] RETAINER  
13. 100-3563 [1] SPACER  
14. 8F-0212 [1] SEAL-O-RING  
15. 195-2139 [2] SEAL-O-RING  
16. 4T-4534 [1] SPRING (OUTER)  
17. 9T-3729 [1] SPRING (INNER)  
18. 2M-9780 [1] SEAL-O-RING  
19. 9S-8006 [1] PLUG (7/8-14-THD)  
20. 4T-4520 [1] WASHER-SPECIAL (CONTROL VALVE)  
21. 4T-4528 [1] RETAINER  
22. 126-5476 [1] SEAT AS-SHUTTLE  
  4T-7807 [1] RING-BACKUP  
  8T-2360 [1] SEAL-O-RING  
  7J-0204 [1] SEAL-O-RING  
23. 126-5796 [1] VALVE GP-SHUTTLE (CONTROL VALVE)  
  8T-2361 [1] SEAL-O-RING  
  1P-7363 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  126-5984 [1] RING-BACKUP  
  126-5985 [1] RING-BACKUP  
24. 5B-9318 [7] BALL  
25. 8S-4710 [2] BOLT (1/4-20X4-IN)  
26. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 128-2776 [1] GASKET  
 

#SEBP26230271
 

6E-5653: VALVE GP-MAKEUP

6E-5653 VALVE GP-MAKEUP
S/N 5WR1-425
PART OF 121-0934, 6E-4950 VALVE GP-BANK
ALSO AN ATTACHMENT
i00401881 SEBP2623
6E5653 VALVE GP-MAKEUP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0657 [1] PLUG  
2. 4K-1388 [1] SEAL-O-RING  
3. 9T-6694 [1] SPRING  
4. 7M-1201 [1] DOWEL  
 

#SEBP26230272
 

9T-6695: VALVE GP-MAKEUP

9T-6695 VALVE GP-MAKEUP
S/N 5WR426-UP
PART OF 121-0934, 6E-4950 VALVE GP-BANK, 209-6765 VALVE GP-BANK 3, 209-6764 VALVE GP-BANK 4
ALSO AN ATTACHMENT
i01109864 SEBP2623
9T6695 VALVE GP-MAKEUP Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0657 [1] PLUG  
2. 4K-1388 [1] SEAL-O-RING  
3. 9T-6694 [1] SPRING  
4. 7M-1201 [1] DOWEL  
 

#SEBP26230273
 

100-2812: VALVE GP-PUMP CONTROL

100-2812 VALVE GP-PUMP CONTROL
S/N 5WR1-UP
PART OF 107-8136 PUMP GP-PISTON
i00459613 SEBP2623
1002812 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [3] SEAL-O-RING  
3. 6E-4241 [1] SPOOL-MARGIN  
4. 9T-2186 [2] PLUG  
5. 6E-4239 [1] SPOOL-CUTOFF  
6. 6E-4230 [2] GUIDE-SPRING  
7. 6E-4228 [1] SPRING  
8. 6E-6140 [1] PLUG-COMPENSATOR  
9. 033-6036 [1] SEAL-O-RING  
10. 9X-8914 M [2] SETSCREW-SOCKET (M8X1.25X45-MM)  
11. 6E-6142 [1] PLUG-MARGIN  
12. 033-6027 [1] SEAL-O-RING  
13. 6E-4246 [1] SPRING-MARGIN  
14. 6E-4318 [1] PIN-SPRING STOP  
15. 6E-4242 [2] GUIDE-SPRING  
16. 6E-6141 [2] LOCKNUT-SEALING  
17. 6E-4229 [1] BODY-COMPENSATOR  
  M   METRIC PART
 

#SEBP26230274
 

6E-0772: VALVE GP-RELIEF

6E-0772 VALVE GP-RELIEF
S/N 5WR1-UP
PART OF 6E-4954 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00396601 SEBP2623
6E0772 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING  
2. 6E-0358 [1] RING-BACKUP  
3. 5K-9090 [1] SEAL-O-RING  
 

#SEBP26230275
 

107-5599: BULLDOZER AR-PWR ANGLE & TILT

107-5599 BULLDOZER AR-PWR ANGLE & TILT
S/N 3WP1-UP
ADJUSTABLE PITCH
AN ATTACHMENT
i01700949 SEBP2623
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5230 Y [1] BLADE GP-ANGLING  
  110-5226 Y [1] C-FRAME GP-POWER ANGLING  
  137-5107 Y [2] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  152-6485 Y [2] CYLINDER GP-HYDRAULIC  
  110-3269 Y [2] CYLINDER GP-BULLDOZER LIFT  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  110-6113 Y [1] LINES GP-ANGLE & TILT  
  111-4626 Y [1] LINES GP-LIFT CYLINDER  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
  134-6775 Y [1] PIN GP-CYLINDER (DOZER)  
   
  107-8126 [2] BEARING  
    (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLTION OF THE C-FRAME)
  109-0959 [4] RING  
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (BACK OF MOLDBOARD, NEAR TOP AT RIGHT HAND END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26230276
 

133-9154: BULLDOZER AR-PWR ANGLE & TILT

133-9154 BULLDOZER AR-PWR ANGLE & TILT
S/N 3XP1-UP
AN ATTACHMENT
i01624159 SEBP2623
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5230 Y [1] BLADE GP-ANGLING  
  110-5226 Y [1] C-FRAME GP-POWER ANGLING  
  137-5107 Y [1] CYLINDER GP-HYDRAULIC (ANGLE)  
    -OR-
  152-6485 Y [2] CYLINDER GP-HYDRAULIC  
  110-4761 Y [1] CYLINDER GP-TILT  
    -OR-
  160-0054 Y [1] CYLINDER GP-TILT (BULLDOZER)  
  110-6113 Y [1] LINES GP-ANGLE & TILT  
  110-5232 Y [1] LINK GP-PITCH  
    -OR-
  190-5328 Y [1] LINK GP-PITCH  
   
  2Y-9790 [1] PLATE-SERIAL NUMBER  
    (BACK OF MOLDBOARD, NEAR TOP RIGHT
    HAND END)
  109-0959 [4] RING  
  107-8126 [2] BEARING  
    BEARING MUST BE PRESSED INTO THE C-FRAME
    MOUNTING BORE IN THE TRACTOR MAIN FRAME
    PRIOR TO INSTALLATION OF THE C-FRAME.
  Y   SEPARATE ILLUSTRATION
 

#SEBP26230277
 

110-5226: C-FRAME GP-POWER ANGLING

110-5226 C-FRAME GP-POWER ANGLING
S/N 3WP1-UP
PART OF 107-5599 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00470849 SEBP2623
1105226 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-9553 [1] FRAME AS  
2. 104-7423 [1] TOWER AS  
3. 109-0958 [2] PIN  
4. 4Y-4905 B [8] WASHER (79X175X2-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 124-5741 [2] PIN  
9. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
10. 108-9604 [1] SPACER  
11. 108-9603 [1] PIN  
12. 108-9602 [1] PIN  
13. 124-5235 B [6] SHIM (0.8-MM THK)(.8MM THK)  
14. 124-5234 [2] RETAINER  
15. 105-2058 [1] BRACKET AS  
16. 7X-2465 M [4] BOLT (M24X3X180-MM)  
17. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
18. 110-5217 [2] PLATE  
19. 110-5218 [2] PLATE  
20. 104-7434 [1] RETAINER  
21. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
22. 104-4817 [1] PIN  
23. 8G-5747 [4] SPACER (45X50X15-MM THK)  
24. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
25. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 124-5233 [2] PIN  
28. 089-8249 [2] SPACER (64X72X13-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26230278
 

110-5226: C-FRAME GP-POWER ANGLING

110-5226 C-FRAME GP-POWER ANGLING
S/N 3WP1-UP; 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT
i01133441 SEBP2623
1105226 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-0799 C [1] FRAME AS  
2. 104-7423 [1] TOWER AS  
3. 145-0804 [1] SLEEVE  
4. 4Y-4905 B [8] WASHER (79X175X2-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 124-5741 [2] PIN  
9. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
10. 108-9604 [1] SPACER  
11. 145-0801 C [1] PIN  
12. 145-0803 C [1] PIN  
13. 124-5235 B [6] SHIM (0.8-MM THK)(.8MM THK)  
14. 124-5234 [2] RETAINER  
15. 105-2058 [1] BRACKET AS  
16. 7X-2465 M [4] BOLT (M24X3X180-MM)  
17. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
18. 110-5217 [2] PLATE  
19. 110-5218 [2] PLATE  
20. 104-7434 [1] RETAINER  
21. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
22. 104-4817 [1] PIN  
23. 8G-5747 [4] SPACER (45X50X15-MM THK)  
24. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
25. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 124-5233 [2] PIN  
28. 089-8249 [2] SPACER (64X72X13-MM THK)  
29. 109-0958 C [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26230279
 

110-5226: C-FRAME GP-POWER ANGLING

110-5226 C-FRAME GP-POWER ANGLING
S/N 3WP1-UP; 3XP1-UP
PART OF 107-5599, 133-9154 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT
i01133451 SEBP2623
1105226 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-0799 [1] FRAME AS  
2. 104-7423 [1] TOWER AS  
3. 145-0804 [1] SLEEVE  
4. 4Y-4905 B [8] WASHER (79X175X2-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 124-5741 [2] PIN  
9. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
10. 161-2113 C [1] SPACER (60X89.8X231-MM THK)  
11. 160-5691 C [1] PIN  
12. 145-0803 [1] PIN  
13. 124-5235 B [6] SHIM (0.8-MM THK)(.8MM THK)  
14. 124-5234 [2] RETAINER  
15. 105-2058 [1] BRACKET AS  
16. 7X-2465 M [4] BOLT (M24X3X180-MM)  
17. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
18. 110-5217 [2] PLATE  
19. 110-5218 [2] PLATE  
20. 104-7434 [1] RETAINER  
21. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
22. 104-4817 [1] PIN  
23. 8G-5747 [4] SPACER (45X50X15-MM THK)  
24. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
25. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 124-5233 [2] PIN  
28. 089-8249 [2] SPACER (64X72X13-MM THK)  
29. 109-0958 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6M :

VALVE GP-CONTROL
6E-4955 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4954 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4953 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-4952 VALVE GP-CONTROL
VALVE GP-CONTROL
209-6762 VALVE GP-CONTROL
VALVE GP-CONTROL
209-6761 VALVE GP-CONTROL
VALVE GP-CHECK
129-1101 VALVE GP-CHECK
VALVE GP-BANK 4
209-6764 VALVE GP-BANK 4
VALVE GP-MAKEUP
6E-5653 VALVE GP-MAKEUP
VALVE GP-MAKEUP
9T-6695 VALVE GP-MAKEUP
VALVE GP-PUMP CONTROL
100-2812 VALVE GP-PUMP CONTROL
VALVE GP-RELIEF
6E-0772 VALVE GP-RELIEF
107-5599 BULLDOZER AR-PWR ANGLE & TILT
133-9154 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING

Truck sale:

Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar D6M
 
Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
 
56,500 
Caterpillar D6M, Crawler dozers, Construction


 
 
Caterpillar D6M, Construction
- Crawler dozers
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.