AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

135-4552 WIRING GP-MACHINE S/N 1CW1-UP PART OF 138-3204 CHASSIS AR Type 1 IT38G INTEGRATED TOOLCARRIER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

INTEGRATED TOOLCARRIER IT38G INTEGRATED TOOLCARRIER 1CW
 IT38G Integrated Toolcarrier 1CW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2643 IT38G 1CW   (1998)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
157-4603 WIRING GP-ENGINE
WIRING GP-FRONT
138-3206 WIRING GP-FRONT
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
 

#SEBP26430300
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 1CW1-UP
PART OF 138-3204 CHASSIS AR
Type 1
i00627350 SEBP2643
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  112-4550 E SLEEVE (15CM)  
2. 7K-1181 [31] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 146-5037 [1] PLATE-INSTRUCTION  
5. 147-6979 [1] HARNESS AS-CHASSIS  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4244 M [1] NUT (M12X1.75-THD)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430301
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 1CW1-UP
PART OF 138-3204 CHASSIS AR
Type 2
i01446934 SEBP2643
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  112-4550 BE SLEEVE  
2. 7K-1181 C [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 171-4405 C [1] HARNESS AS-CHASSIS  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  8N-1522 [1] NUT (2-1/4-16-THD)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1535 [1] BELL AS-END  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 C [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 C [1] CLIP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430302
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 1CW1-99999
PART OF 138-3204 CHASSIS AR
i01666945 SEBP2643
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 KIT-RECEPTACLE (3-PIN)  
  112-4550 BE SLEEVE  
2. 7K-1181 [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 214-6405 C [1] HARNESS AS-CHASSIS  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  8N-1522 [1] NUT (2-1/4-16-THD)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1535 [1] BELL AS-END  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  7K-1181 [3] STRAP-CABLE  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 [1] CLIP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430303
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 1CW1-UP
PART OF 135-0511 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
i00695285 SEBP2643
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [5] LOCKWASHER  
2. 3E-6329 BY [1] ALARM GP (ACTION)  
3. 7K-1181 [16] STRAP-CABLE  
4. 8T-8737 [26] PLUG-SEAL  
5. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
6. 107-6065 B [1] SWITCH GP-LAMP TEST  
7. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 109-2356 B [3] PLUG (SWITCH)  
9. 110-6109 [1] KNOB-CONTROL  
10. 111-0155 [1] PLATE AS (LH)  
11. 111-0156 [1] PLATE AS (RH)  
12. 111-0161 [5] HOUSING  
13. 111-7873 [1] HARNESS AS-CAB (SHELL)  
14. 111-7899 B [3] GASKET  
15. 112-4735 [1] CONTROL GP-DIODE BLOCK  
16. 114-3947 [5] PLATE  
17. 115-1748 [10] LAMP (24-VOLT, 3-WATT)  
18. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
19. 118-7241 [1] FILM-INSTRUCTION (DASH, RH)(RH DUCT)  
20. 135-2603 [1] FILM-PANEL (LH DUCT)  
21. 151-6258 [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)(DUCT)  
22. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
23. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
24. 102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
25. 4P-7581 [1] CLIP (LADDER)  
26. 4P-8134 [3] CLIP (LADDER)(TIE WRAP)  
27. 5C-8312 M [5] NUT (M4X0.7-THD)  
28. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430304
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 1CW1-UP
PART OF 135-0511 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
i01197955 SEBP2643
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [5] LOCKWASHER  
2. 3E-6329 Y [1] ALARM GP (ACTION)  
3. 7K-1181 [16] STRAP-CABLE  
4. 8T-8737 [26] PLUG-SEAL  
5. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
6. 107-6065 B [1] SWITCH GP-LAMP TEST  
7. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 109-2356 B [3] PLUG (SWITCH)  
9. 110-6109 [1] KNOB-CONTROL  
10. 111-0155 [1] PLATE AS (LH)  
11. 111-0156 [1] PLATE AS (RH)  
12. 111-0161 [5] HOUSING  
13. 111-7873 [1] HARNESS AS-CAB (SHELL)  
14. 111-7899 B [3] GASKET  
15. 112-4735 [1] CONTROL GP-DIODE BLOCK  
16. 114-3947 [5] PLATE  
17. 115-1748 [10] LAMP (24-VOLT, 3-WATT)  
18. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
19. 118-7241 [1] FILM-INSTRUCTION (DASH, RH)(RH DUCT)  
20. 135-2603 [1] FILM-PANEL (LH DUCT)  
21. 173-9190 C [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)(DUCT)  
22. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
23. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
24. 102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
25. 4P-7581 [1] CLIP (LADDER)  
26. 4P-8134 [3] CLIP (LADDER)(TIE WRAP)  
27. 5C-8312 M [5] NUT (M4X0.7-THD)  
28. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430305
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 1CW1-99999
PART OF 135-0511 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i01529707 SEBP2643
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [15] STRAP-CABLE  
2. 8T-8737 C [26] PLUG-SEAL  
3. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
4. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
    (RUNNING/FLOOD/PANEL/TAIL LIGHTS)
5. 109-2356 BC [4] PLUG  
6. 110-6109 [1] KNOB-CONTROL  
7. 111-7899 BC [4] GASKET  
8. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
9. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
  111-7899 [1] GASKET  
10. 148-0642 CY [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
11. 156-7183 C [1] PLATE AS (LH)  
12. 156-7184 C [1] PLATE AS (RH)  
13. 157-1997 C [4] SPACER (4.34X15.88X6.34-MM THK)  
14. 172-2309 C [1] HARNESS AS-CAB  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
15. 198-5177 C [1] FILM-PANEL (DUCT, LH)  
16. 200-1889 C [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [13] PLUG-SEAL  
  5P-6271 [1] CONNECTOR AS  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
17. 201-2674 C [1] FILM-PANEL  
18. 202-9749 CY [1] MODULE GP-WARNING INDICATOR  
19. 1P-7326 C [4] WASHER (4.32X9.52X1.52-MM THK)  
20. 102-8804 C [1] KIT-RECEPTACLE (4-PIN)  
21. 102-8805 C [1] KIT-RECEPTACLE (6-PIN)  
22. 102-8806 C [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 8T-2659 CM [4] LOCKNUT (M4X0.7-THD)  
26. 8T-4121 C [1] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 CM [1] NUT (M10X1.5-THD)  
28. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430306
 

137-6838: WIRING GP-RELAY PANEL

137-6838 WIRING GP-RELAY PANEL
S/N 1CW1-99999
PART OF 135-4552 WIRING GP-MACHINE
i00602496 SEBP2643
1376838 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-2612 [1] RELAY AS (24-VOLT)(TILT HOOD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 4B-2043 [4] NUT (8-32-THD)  
3. 5H-6565 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 5M-6668 [4] SCREW-MACHINE (8-32X0.75-IN)  
5. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
6. 7V-9275 [1] STRAP  
7. 9S-4693 [2] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
8. 106-3226 [1] BOX AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9R-2821 M [4] BOSS (M10X1.5X15-MM)  
9. 125-1302 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
10. 136-3307 [1] PLATE AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 141-4747 [1] PLATE-IDENTIFICATION (MAIN POWER BREAKER)  
13. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 5C-9553 M [4] BOLT (M6X1X16-MM)  
16. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
17. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
19. 9S-4693 [2] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430307
 

143-2469: WIRING GP-SECONDARY STEERING

143-2469 WIRING GP-SECONDARY STEERING
S/N 1CW1-UP
PART OF 143-2462 STEERING AR-SECONDARY
AN ATTACHMENT
i00583839 SEBP2643
1432469 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0154 [1] SWITCH GP-MAGNETIC (SECONDARY STEERING)  
  4D-1326 [2] LOCKWASHER (EXTERNAL TOOTH)  
  6V-8378 [2] NUT (10-32-THD)  
  6V-8801 [2] NUT (3/8-16-THD)  
  7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
  7X-0620 [2] WASHER-HARD (5.5X13X1.6-MM THK)  
  8F-1434 [2] LOCKWASHER  
2. 5V-7080 [1] CABLE AS  
3. 113-8445 [1] CABLE AS  
4. 115-3069 [2] CLIP AS-CONNECTING (3-PIN)  
5. 116-4491 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 118-5597 [1] DIODE AS  
7. 143-2470 [1] HARNESS AS-STEERING (SECONDARY)  
8. 145-1015 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
9. 146-1538 [1] CABLE AS  
10. 146-1549 [1] CABLE AS  
11. 146-1550 [1] CABLE AS  
12. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3K-0360 [2] SEAL-O-RING  
14. 4S-1962 [1] CLIP (LOOP)  
15. 5C-2890 M [4] NUT (M6X1-THD)  
17. 6V-8188 [6] NUT (1/2-13-THD)  
18. 7F-0560 [6] WASHER (0.516X0.938X0.101-IN THK)  
19. 7X-2552 M [2] BOLT (M16X2X30-MM)  
20. 8C-6358 [1] BLOCK AS-JUNCTION (BATTERY)  
  1D-5117 [3] NUT-JAM (1/2-13-THD)  
21. 8L-8413 [12] STRAP-CABLE (WHITE)  
22. 8M-2770 [1] CLIP (LOOP)  
23. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4133 M [1] NUT (M10X1.5-THD)  
25. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
26. 8T-4138 M [4] BOLT (M6X1X20-MM)  
27. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
28. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
29. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
32. 9M-8406 [6] CLIP (LOOP)  
33. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
34. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
35. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY STEERING OIL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
 

#SEBP26430308
 

179-9282: WIRING GP-SECONDARY STEERING

179-9282 WIRING GP-SECONDARY STEERING
S/N 1CW1-99999
PART OF 143-2462 STEERING AR-SECONDARY
AN ATTACHMENT
i01253997 SEBP2643
1799282 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-7080 [1] CABLE AS  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  1M-6120 [1] NUT (5/16-18-THD)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(180CM)  
2. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 113-8445 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(28CM)  
  8N-0869 [2] COVER-TERMINAL (RED)  
4. 115-3069 [2] CLIP AS-CONNECTING (3-PIN)  
5. 116-4491 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 145-1015 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
7. 146-1550 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(34CM)  
8. 179-9280 [1] HARNESS AS-STEERING (SECONDARY)  
  8T-8737 [2] PLUG-SEAL  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
9. 179-9833 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(200CM)  
  8N-0869 [2] COVER-TERMINAL (RED)  
10. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
11. 3K-0360 [2] SEAL-O-RING  
12. 4S-1962 [1] CLIP (LOOP)  
14. 6V-8188 [6] NUT (1/2-13-THD)  
15. 7F-0560 [6] WASHER (0.516X0.938X0.101-IN THK)  
16. 7X-2552 M [2] BOLT (M16X2X30-MM)  
17. 8C-6358 [1] BLOCK AS-JUNCTION (BATTERY)  
  1D-5117 [3] NUT-JAM (1/2-13-THD)  
  8T-3519 [3] BOLT-BRONZE (1/2-13X2-IN)  
18. 8L-8413 [10] STRAP-CABLE (WHITE)  
19. 8M-2770 [1] CLIP (LOOP)  
20. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [1] NUT (M10X1.5-THD)  
22. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
23. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
24. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
25. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 174-5907 [6] CLIP (LOOP)  
29. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
30. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP26430309
 

134-8505: WIRING GP-TRACTION CONTROL

134-8505 WIRING GP-TRACTION CONTROL
S/N 1CW1-UP
PART OF 134-8501 CONTROL AR-TRACTION
AN ATTACHMENT
i00600812 SEBP2643
1348505 WIRING GP-TRACTION CONTROL Parts scheme 1348505 WIRING GP-TRACTION CONTROL Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7078 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
4. 2D-0388 [1] GROMMET (25.4-MM ID)  
5. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
6. 109-7080 [2] GUARD AS  
7. 9R-5383 [1] BOSS  
8. 9M-8406 [1] CLIP (LOOP)  
9. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
10. 7K-1181 [17] STRAP-CABLE  
11. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 8C-5607 [6] MOUNT-ISOLATION  
14. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
15. 4E-2250 [1] HOUSING  
16. 141-7552 [1] PLUG AS (FOR IT38G ONLY)  
17. 152-7356 [1] LEVER  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6431 [2] ROD END  
20. 119-4167 [1] ROD  
21. 8T-4133 M [2] NUT (M10X1.5-THD)  
22. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
23. 6V-8211 M [3] BOLT (M6X1X55-MM)  
24. 152-3764 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
25. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 105-3769 [1] SENSOR GP-POSITION (ARTICULATION ANGLE)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
28. 2H-3429 [1] RING-RETAINING  
29. 6D-3025 [2] BALL BEARING  
30. 152-7205 [1] SHAFT  
31. 2L-6726 [2] RING-RETAINING  
32. 4J-9448 [3] LUG  
33. 135-4708 [1] HARNESS AS-CONTROL (TRACTION-MAIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  8T-8737 [58] PLUG-SEAL  
34. 3K-0360 [4] SEAL-O-RING  
35. 135-4705 [1] HARNESS AS-CONTROL (TRACTION-REAR AXLE)  
36. 139-6198 Y [1] SERVICE GP-MACHINE (TRACTION CONTROL SYSTEM)  
37. 109-7330 [4] SENSOR GP-SPEED (WHEEL SPEED)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (26CM)  
  4B-4277 [1] WASHER (8.8X17.5X1.6-MM THK)  
38. 139-8974 [1] HARNESS AS-CONTROL (TRACTION-FRONT AXLE)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
39. 6V-3265 [6] CLIP  
40. 2H-9524 [2] GROMMET  
41. 8T-5387 [2] GROMMET  
42. 109-7079 [2] GUARD AS  
43. 1S-9593 [1] STRAP-CABLE  
44. 9U-2277 [1] CLIP AS  
45. 8L-8413 [1] STRAP-CABLE (WHITE)  
46. 118-9623 [1] PLATE AS  
  6B-4284 [4] RIVET  
47. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
48. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4P-8134 [3] CLIP (LADDER)  
50. 141-7553 [1] PLUG AS  
51. 141-9817 [1] GUARD AS  
52. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
53. 8T-9655 [8] MOUNT-ISOLATION  
54. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
55. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
56. 1S-0994 [1] CLIP (LOOP)  
57. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Engine Starting with Auxiliary Start Receptacle - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery Disconnect Switch
938G Wheel Loader and IT38G Integrated Toolcarrier
Circuit Breakers - Reset
938G Wheel Loader and IT38G Integrated Toolcarrier
Alert Indicators
938G Wheel Loader and IT38G Integrated Toolcarrier
Battery or Battery Cable - Inspect/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
Electrical Problems And Malfunctions
Electrical Problems And Malfunctions
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Temperature Sender (Torque Converter Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Power Train
Temperature Sender (Hydraulic Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System
Wheel Speed Sensor
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System
Toggle Switch (Hood Tilt)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Test/Enable Switch
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM)
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Operator Display
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Sensors
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Data Link
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Brake Air Purge Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Harness Code Plug
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Switches
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Sensors
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Articulation Angle Position Sensor - Adjust and Calibrate
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wheel Speed Sensor - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electric Starting System - Test
3114, 3116, and 3126 Engines
System Schematic
Machine Security System
Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Remote Direction Switch - Disable
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Electrical Connector - Inspect
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Replace
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electronic Control Module (ECM) - Flash Program
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Open Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Wiring Harness (Short Circuit) - Test
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Connector - Inspect
Work Area Visual System
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Electrical Component and Connector Locations
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0190 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0191 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0683 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0346 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 03
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 05
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0421 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0367 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
MID 081 - CID 0621 - FMI 02
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Toggle Switch (Automatic/Manual)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
Limit Switch (Parking Brake)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System
General Information
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Connector Locations
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Code List
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Diagnostic Capabilities
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0248 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 00
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 09
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0270 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0605 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0606 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0607 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0616 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0653 - FMI 12
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
MID 028 - CID 0687 - FMI 02
938G Wheel Loader, 938G Series II
Wheel Loader, IT38G
Integrated Toolcarrier and IT38G Series II
Integrated Toolcarrier Traction Control System
Electrical Component and Connector Locations
Machine Security System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Procedure to Disable Top Gears {3168}
2000/02/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06
Correction to Operation and Maintenance Manual , "Transmission Neutralizer Override Control" {7332, 7451}
2001/12/17
Improved Pressure Switch Now Used {1435}
2004/04/19
Improved Service Meter Used {7478}
2004/05/03
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog IT38G :

WIRING GP-FRONT
138-3206 WIRING GP-FRONT
WIRING GP-ENGINE
157-4603 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-CAB
134-4099 WIRING GP-CAB
WIRING GP-CAB
134-4099 WIRING GP-CAB
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS
WIRING GP-RELAY PANEL
137-6838 WIRING GP-RELAY PANEL
WIRING GP-SECONDARY STEERING
143-2469 WIRING GP-SECONDARY STEERING
WIRING GP-SECONDARY STEERING
179-9282 WIRING GP-SECONDARY STEERING

Truck sale:

Caterpillar IT38G
 
Caterpillar IT38G
- Wheel Loaders
ZIEGLER CAT
 
 
Caterpillar IT38G II, Misc Forklifts, Material handling equipment


 
30.773 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


 
63.000 
Caterpillar IT38G II 3, Radlader, Bau-Und Bergbauausrüstung


Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.