AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

151-8206 CYLINDER GP-TILT S/N 8JW1-UP 215.9MM (8.5 IN) BORE X 540MM (21.3 IN) STROKE PART OF 153-4948 CYLINDER & SEAL GP-TILT Type 2 950G


HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP

WHEEL LOADER 950G WHEEL LOADER 8JW
 950G Wheel Loader 8JW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2644 950G 8JW   (1998)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
118-9001 CYLINDER GP-TILT
CYLINDER GP-TILT
151-8206 CYLINDER GP-TILT
CYLINDER GP-TILT
151-8206 CYLINDER GP-TILT
LINES GP-COUPLER
190-7410 LINES GP-COUPLER
 

#SEBP26440430
 

151-8206: CYLINDER GP-TILT

151-8206 CYLINDER GP-TILT
S/N 8JW1-UP
215.9MM (8.5 IN) BORE X 540MM (21.3 IN) STROKE
PART OF 153-4948 CYLINDER & SEAL GP-TILT
Type 2
i01602745 SEBP2644
1518206 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-8208 [1] CYLINDER AS  
  9J-7099 [1] BUSHING  
2. 3J-9449 [1] LOCKNUT (2-1/2-12-THD)  
3. 159-3452 [1] PISTON  
4. 4J-6557 [1] RING  
5. 9M-5024 [1] SEAL-O-RING  
6. 151-8212 [1] HEAD  
7. 151-8207 [1] ROD AS  
  3G-8779 [1] BUSHING  
8. 8C-9101 [1] RING-WEAR  
9. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
10. 9T-0119 [1] SEAL AS  
11. 7J-8064 [1] RING-WEAR  
12. 8T-0668 M [2] BOLT (M24X3X110-MM)  
13. 9M-2828 [8] WASHER-HARD (28X44.5X6-MM THK)  
14. 173-9779 M [6] BOLT (M24X3X80-MM)  
15. 225-3285 C [1] SEAL-WIPER  
16. 167-2320 C [1] SEAL-U-CUP  
17. 167-2209 C [1] SEAL AS-BUFFER  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26440431
 

134-3016: FILTER GP-OIL

134-3016 FILTER GP-OIL -HYDRAULIC
S/N 8JW1-UP
PART OF 145-4673 LINES GP-HYDRAULIC OIL COOLER
i00791766 SEBP2644
1343016 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
2. 8C-3446 [1] VALVE-SAMPLING  
3. 3J-7354 [1] SEAL-O-RING  
4. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
5. 7X-8549 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER BYPASS)  
6. 3J-1907 [1] SEAL-O-RING  
 

#SEBP26440432
 

145-9362: HYDRAULIC AR-2 VALVE

145-9362 HYDRAULIC AR-2 VALVE
S/N 8JW1-UP
PART OF 126-7782 GENERAL AR
i00791774 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-6986 Y [1] CYLINDER & SEAL GP-LIFT (LH)  
  112-6987 Y [1] CYLINDER & SEAL GP-LIFT (RH)  
  112-6988 Y [1] CYLINDER & SEAL GP-TILT  
  112-6990 Y [1] LINES GP-HYDRAULIC  
  112-6991 Y [1] LINES GP-LIFT CYLINDER  
  144-4237 Y [1] LINES GP-PILOT  
  112-6993 Y [1] LINES GP-TILT CYLINDER  
  112-6994 Y [1] MOUNTING GP-HYDRAULIC TANK  
  112-6995 Y [1] PUMP & MTG GP-HYDRAULIC (STEERING, IMPL, PILOT, BRAKE)  
  129-1243 Y [1] TANK GP-HYDRAULIC  
  144-4017 Y [1] VALVE & MTG GP-MAIN CONTROL (2-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440433
 

145-4892: HYDRAULIC AR-3 VALVE

145-4892 HYDRAULIC AR-3 VALVE
S/N 8JW1-UP
i00802150 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  143-4615 Y [1] ARM AS-LIFT  
  153-0401 Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  126-7738 Y [1] LINES GP-FRONT  
  145-2805 Y [1] LINES GP-PILOT (3-VALVE)  
  144-4018 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440434
 

147-5143: HYDRAULIC AR-3 VALVE

147-5143 HYDRAULIC AR-3 VALVE
S/N 8JW1-UP
LOGGING
PART OF 147-5142 LOGGING AR
i00798486 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  143-4615 Y [1] ARM AS-LIFT  
  153-0401 Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  153-4948 Y [1] CYLINDER & SEAL GP-TILT  
  126-7738 Y [1] LINES GP-FRONT  
  145-2805 Y [1] LINES GP-PILOT (3-VALVE)  
  151-0884 Y [1] LINES GP-TILT CYLINDER  
  144-4019 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440435
 

161-4362: HYDRAULIC AR-3 VALVE

161-4362 HYDRAULIC AR-3 VALVE
S/N 8JW1-UP
i00894286 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  143-4615 Y [1] ARM AS-LIFT  
  Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  126-7738 Y [1] LINES GP-FRONT  
  145-2805 Y [1] LINES GP-PILOT (3-VALVE)  
  144-4018 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440436
 

161-4363: HYDRAULIC AR-3 VALVE

161-4363 HYDRAULIC AR-3 VALVE
S/N 8JW1-UP
PART OF 161-4364 LOGGING AR
FOR USE WITH 161-4364 LOGGING AR
i00893941 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  143-4615 Y [1] ARM AS-LIFT  
  Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  153-4948 Y [1] CYLINDER & SEAL GP-TILT  
  126-7738 Y [1] LINES GP-FRONT  
  145-2805 Y [1] LINES GP-PILOT (3-VALVE)  
  151-0884 Y [1] LINES GP-TILT CYLINDER  
  144-4019 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440437
 

126-7788: KICKOUT & POSITIONER GP

126-7788 KICKOUT & POSITIONER GP
S/N 8JW1-262
PART OF 148-5656 ELECTRICAL AR
i00800060 SEBP2644
1267788 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7844 Y [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 [2] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4V-1939 [4] CLAMP  
4. 4V-4840 [1] MAGNET AS  
5. 5G-7820 [1] MAGNET AS  
6. 5V-6439 [2] PLATE  
7. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
8. 087-5421 [1] PLATE  
9. 116-2025 Y [1] CONTROL GP-POSITION (TILT)  
10. 130-5300 [1] CLIP  
11. 131-3253 [1] TUBE AS  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440438
 

126-7788: KICKOUT & POSITIONER GP

126-7788 KICKOUT & POSITIONER GP
S/N 8JW263-286
PART OF 148-5656 ELECTRICAL AR
i01564694 SEBP2644
1267788 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8670 CY [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 C [4] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4V-1939 [4] CLAMP  
4. 4V-4840 [1] MAGNET AS  
5. 5G-7820 [1] MAGNET AS  
6. 5V-6439 [2] PLATE  
7. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
8. 087-5421 [1] PLATE  
9. 116-2025 Y [1] CONTROL GP-POSITION (TILT)  
10. 130-5300 [1] CLIP  
11. 131-3253 [1] TUBE AS  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440439
 

126-7788: KICKOUT & POSITIONER GP

126-7788 KICKOUT & POSITIONER GP
S/N 8JW287-UP
PART OF 148-5656 ELECTRICAL AR
Type 1
i01315376 SEBP2644
1267788 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8670 Y [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 [2] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4V-1939 [4] CLAMP  
4. 4V-4840 [1] MAGNET AS  
5. 5G-7820 [1] MAGNET AS  
6. 5V-6439 [2] PLATE  
7. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
8. 087-5421 [1] PLATE  
9. 176-5459 CY [1] CONTROL GP-POSITION (TILT)  
10. 130-5300 [1] CLIP  
11. 131-3253 [1] TUBE AS  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G :

CYLINDER GP-TILT
151-8206 CYLINDER GP-TILT
CYLINDER GP-TILT
118-9001 CYLINDER GP-TILT
CYLINDER GP-LIFT
125-0024 CYLINDER GP-LIFT
CYLINDER GP-LIFT
118-8296 CYLINDER GP-LIFT
CYLINDER GP-COUPLER
208-0828 CYLINDER GP-COUPLER
CYLINDER & SEAL GP-TILT
153-4948 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-TILT
112-6988 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-LIFT
112-6987 CYLINDER & SEAL GP-LIFT
FILTER GP-OIL
134-3016 FILTER GP-OIL
145-9362 HYDRAULIC AR-2 VALVE
145-4892 HYDRAULIC AR-3 VALVE
147-5143 HYDRAULIC AR-3 VALVE
161-4362 HYDRAULIC AR-3 VALVE
161-4363 HYDRAULIC AR-3 VALVE
KICKOUT & POSITIONER GP
126-7788 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7788 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.