AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3E-8574 VALVE GP-SOLENOID S/N 8JW1-UP PART OF 124-8640, 160-7116 VALVE GP-DIVERTER 950G WHEEL LOADER


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
STEERING SYSTEM
CYLINDER GP
LINES GP

WHEEL LOADER 950G WHEEL LOADER 8JW
 950G Wheel Loader 8JW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2644 950G 8JW   (1998)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
VALVE GP-SOLENOID
3E-8574 VALVE GP-SOLENOID
VALVE GP-SOLENOID
3E-8575 VALVE GP-SOLENOID
 

#SEBP26440510
 

3E-8574: VALVE GP-SOLENOID

3E-8574 VALVE GP-SOLENOID
S/N 8JW1-UP
PART OF 124-8640, 160-7116 VALVE GP-DIVERTER
i00799472 SEBP2644
3E8574 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4276 [1] WASHER (7X16X1.6-MM THK)  
2. [1] CARTRIDGE AS  
3. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
4. 3E-8582 [1] COIL AS  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
5. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES WEDGE)
6. 1S-9593 [2] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  8J-9348 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES 3-SEAL-O-RINGS & 2-RINGS-BACK UP)
 

#SEBP26440511
 

3E-8575: VALVE GP-SOLENOID

3E-8575 VALVE GP-SOLENOID
S/N 8JW430-UP
24-VOLT
PART OF 185-2270 VALVE GP-DIVERTER
i01488918 SEBP2644
3E8575 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-3382 [1] CARTRIDGE AS  
2. 160-5843 [1] WASHER (16.8X38.1X0.5-MM THK)  
3. 157-2284 [1] LOCKNUT-SPECIAL (5/8-18-THD)  
4. 160-5844 [1] WASHER-SPRING (16.3X31.5X1.85-MM THK)  
5. 3E-8581 [1] COIL AS (24-VOLT)  
6. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 1S-9593 [2] STRAP-CABLE  
9. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
   
    AVAILABLE REPAIR KIT(S):
  126-5948 [1] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
 

#SEBP26440512
 

112-6956: CYLINDER & MTG GP-STEERING

112-6956 CYLINDER & MTG GP-STEERING
S/N 8JW1-UP
PART OF 126-7783 CHASSIS AR
Type 1
i00791352 SEBP2644
1126956 CYLINDER & MTG GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7G-8839 [4] SPACER (13.5X57X6-MM THK)  
3. 118-8288 Y [2] CYLINDER GP-STEERING  
4. 136-1711 [4] PIN AS  
5. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
6. 094-1883 [2] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440513
 

112-6956: CYLINDER & MTG GP-STEERING

112-6956 CYLINDER & MTG GP-STEERING
S/N 8JW1-UP
PART OF 126-7783 CHASSIS AR
Type 2
i01070586 SEBP2644
1126956 CYLINDER & MTG GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7G-8839 [4] SPACER (13.5X57X6-MM THK)  
3. 136-1711 [4] PIN AS  
4. 163-0324 CY [2] CYLINDER GP-HYDRAULIC (STEERING)  
5. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440514
 

163-0324: CYLINDER GP-HYDRAULIC

163-0324 CYLINDER GP-HYDRAULIC -STEERING
S/N 8JW1-UP
88.9 MM (3.5 IN) BORE X 549.0 MM (21.6 IN) STROKE
PART OF 112-6956 CYLINDER & MTG GP-STEERING
i01008408 SEBP2644
1630324 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0325 [1] CYLINDER AS  
  1K-6985 [2] RING-RETAINING  
  9M-1328 [1] BEARING-SELF-ALIGNING  
2. 173-9779 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 163-0326 [1] PISTON  
5. 175-7898 J [1] SEAL-O-RING  
6. 4J-9224 J [1] RING-BACKUP  
7. 163-0329 [1] HEAD  
8. 163-0327 [1] ROD AS  
  1K-6985 [2] RING-RETAINING  
  9M-1328 [1] BEARING-SELF-ALIGNING  
9. 7J-9885 J [1] RING-WEAR  
10. 4T-8054 J [1] SEAL AS  
11. 308-1880 J [1] SEAL-WIPER  
12. 167-2191 J [1] SEAL AS-BUFFER  
13. 351-8628 J [1] SEAL-U-CUP  
14. 4T-6907 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9016 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26440515
 

118-8288: CYLINDER GP-STEERING

118-8288 CYLINDER GP-STEERING
S/N 8JW1-UP
88.9 MM (3.5 IN) BORE X 531 MM (20.91 IN) STROKE
PART OF 112-6956 CYLINDER & MTG GP-STEERING
Type 1
i00791699 SEBP2644
1188288 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5955 [1] CYLINDER AS  
  6V-5002 [1] BEARING-ALIGNING  
  1K-6985 [2] RING-RETAINING  
2. 6V-8133 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 136-8613 [1] PISTON  
5. 2H-4145 [1] SEAL-O-RING  
6. 4J-9224 [1] RING-BACKUP  
7. 9T-8790 [1] HEAD  
8. 119-5957 [1] ROD AS  
  6V-5002 [1] BEARING-ALIGNING  
  1K-6985 [2] RING-RETAINING  
9. 7J-9885 [1] RING-WEAR  
10. 4T-8054 [1] SEAL AS  
11. 1L-4775 [1] RING-RETAINING  
12. 8C-9132 [1] SEAL-LIP TYPE  
13. 5J-8175 [1] SEAL-U-CUP  
14. 8C-9123 [1] SEAL AS  
15. 4T-6907 [1] RING-WEAR  
  M   METRIC PART
 

#SEBP26440516
 

118-8288: CYLINDER GP-STEERING

118-8288 CYLINDER GP-STEERING
S/N 8JW1-UP
88.9 MM (3.5 IN) BORE X 531 MM (20.91 IN) STROKE
PART OF 112-6956 CYLINDER & MTG GP-STEERING
Type 2
i01008812 SEBP2644
1188288 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5955 [1] CYLINDER AS  
  6V-5002 [1] BEARING-ALIGNING  
  1K-6985 [2] RING-RETAINING  
2. 6V-8133 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 136-8613 [1] PISTON  
5. 2H-4145 [1] SEAL-O-RING  
6. 4J-9224 [1] RING-BACKUP  
7. 153-7182 C [1] HEAD  
8. 119-5957 [1] ROD AS  
  6V-5002 [1] BEARING-ALIGNING  
  1K-6985 [2] RING-RETAINING  
9. 7J-9885 [1] RING-WEAR  
10. 4T-8054 [1] SEAL AS  
11. 150-6739 C [1] SEAL-LIP TYPE  
12. 5J-8175 [1] SEAL-U-CUP  
13. 150-6738 C [1] SEAL-BUFFER  
14. 4T-6907 [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26440517
 

154-2801: LINES GP-SECONDARY STEERING

154-2801 LINES GP-SECONDARY STEERING
S/N 8JW1-UP
PART OF 141-2800 STEERING AR-SECONDARY
i00802055 SEBP2644
1542801 LINES GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0484 [2] ELBOW  
2. 141-2806 I [1] HOSE AS  
3. 141-2809 I [1] HOSE AS  
4. 141-2810 I [1] HOSE AS  
5. 141-2814 [1] FLANGE  
6. 154-2807 [1] TUBE AS  
7. 154-2808 [1] TUBE AS  
8. 141-2597 Y [1] VALVE GP-SECONDARY STEERING  
9. 1P-3706 [1] SEAL-RECTANGULAR  
10. 1P-4577 [4] FLANGE-HALF  
11. 2M-9780 [2] SEAL-O-RING  
12. 3J-1907 [4] SEAL-O-RING  
13. 3K-0360 [1] SEAL-O-RING  
14. 4J-0520 [2] SEAL-O-RING  
15. 4S-1962 [1] CLIP (LOOP)  
16. 5P-8874 [2] ADAPTER  
17. 6D-4246 [1] CLIP (LOOP)  
18. 6V-8626 [1] ELBOW  
19. 6V-8629 [1] ELBOW  
20. 6V-8716 [1] CONNECTOR (STRAIGHT)  
21. 6V-8722 [1] ELBOW  
22. 6V-9746 [3] SEAL-O-RING  
23. 7J-9108 [2] SEAL-O-RING  
24. 7M-8485 [1] SEAL-O-RING  
25. 7X-2549 M [3] BOLT (M12X1.75X100-MM)  
26. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
28. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
29. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
31. 7K-1181 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440518
 

143-4874: LINES GP-STEERING

143-4874 LINES GP-STEERING
S/N 8JW1-UP
PART OF 126-7783 CHASSIS AR
Type 1
i00771803 SEBP2644
1434874 LINES GP-STEERING Parts scheme 1434874 LINES GP-STEERING Parts scheme 1434874 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [5] SEAL-O-RING  
2. 6V-8639 [4] CONNECTOR  
3. 6V-8397 [2] SEAL-O-RING  
4. 146-9043 I [1] HOSE AS  
5. 3J-1907 [5] SEAL-O-RING  
6. 6V-8636 [5] CONNECTOR  
7. 6V-9836 [1] TEE-SWIVEL  
8. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
9. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 136-3109 [1] MANIFOLD  
11. 7M-8485 [3] SEAL-O-RING  
12. 9S-4181 [1] PLUG (1-5/16-12-THD)  
13. 6V-9746 [5] SEAL-O-RING  
14. 136-3105 I [1] HOSE AS  
15. 3D-2824 [2] SEAL-O-RING  
16. 6V-9004 [1] ELBOW  
17. 6V-8637 [1] CONNECTOR  
18. 6V-8635 [1] CONNECTOR  
19. 147-3148 I [1] HOSE AS  
20. 8T-8899 [1] ELBOW  
21. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
22. 7G-5985 [1] CLIP (SLOT)  
23. 7G-5984 [1] CLIP (TAB)  
24. 6V-1876 [1] GROMMET  
25. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
26. 146-6581 M [2] BOLT-FLAT HEAD (M12X1.75X72-MM)  
27. 8T-4244 M [2] NUT (M12X1.75-THD)  
28. 141-8807 [1] PLATE  
29. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
30. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
31. 8M-4069 [4] WASHER (10.3X38.1X5-MM THK)  
32. 6N-6984 [4] MOUNT-RUBBER  
33. 147-7343 Y [1] PUMP GP-METERING (HMU)(STEERING)  
34. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
35. 128-1602 [1] BRACKET AS  
  9R-2060 M [4] BOSS (M10X1.5X21-MM)  
36. 4S-1962 [1] CLIP (LOOP)  
37. 4I-7651 [1] TEE-O-RING PORT  
39. 1P-3706 [1] SEAL-RECTANGULAR  
40. 141-2814 [1] FLANGE  
43. 147-3146 I [1] HOSE AS  
44. 5K-9090 [1] SEAL-O-RING  
45. 4J-0520 [1] SEAL-O-RING  
46. 7D-7233 [1] CLIP (LOOP)  
47. 6V-8398 [6] SEAL-O-RING  
48. 166-1732 I [1] HOSE AS  
49. 146-9040 I [1] HOSE AS  
50. 6V-8397 [14] SEAL-O-RING  
51. 4J-0520 [2] SEAL-O-RING  
52. 128-1616 I [1] HOSE AS  
53. 146-9041 [1] TUBE AS  
54. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
55. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
56. 5P-9297 [2] CLIP (LOOP)  
57. 146-9038 I [1] HOSE AS  
58. 1V-6275 [2] TAG-IDENTIFICATION (LETTER S)  
59. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
60. 1S-0994 [2] CLIP (LOOP)  
61. 148-0914 [1] TUBE AS  
62. 6V-9850 [2] ELBOW  
63. 6V-8636 [1] CONNECTOR  
64. 3J-1907 [3] SEAL-O-RING  
65. 146-9044 I [1] HOSE AS  
66. 1V-6276 [4] TAG-IDENTIFICATION (LETTER L)  
67. 9T-7426 Y [2] VALVE GP-STEERING NEUTRALIZER  
68. 8T-4172 M [4] BOLT (M10X1.5X80-MM)  
69. 8T-4133 M [4] NUT (M10X1.5-THD)  
70. 146-9037 I [1] HOSE AS  
71. 8T-8902 [1] ADAPTER-TEE  
72. 8T-7546 [1] ELBOW  
73. 3J-7354 [1] SEAL-O-RING  
74. 6V-0852 [2] CAP-DUST  
75. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
76. 8T-6663 [1] ADAPTER-PORT  
77. 146-9045 I [1] HOSE AS  
78. 146-9036 I [1] HOSE AS  
79. 1V-6274 [4] TAG-IDENTIFICATION (LETTER R)  
80. 146-9042 I [1] HOSE AS  
81. 3D-2824 [3] SEAL-O-RING  
82. 6V-9007 [2] ELBOW  
83. 147-3149 I [1] HOSE AS  
84. 4J-5267 [1] SEAL-O-RING  
85. 6V-9746 [1] SEAL-O-RING  
86. 5K-9090 [1] SEAL-O-RING  
87. 128-1605 [1] TUBE AS  
88. 8T-6684 [1] ELBOW  
89. 8T-4121 [36] WASHER-HARD (11X21X2.5-MM THK)  
90. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
91. 147-3150 [1] ANGLE AS  
92. 6D-4244 [1] CLIP (LOOP)  
93. 6D-1641 [2] CLIP (LOOP)  
94. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
95. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
96. 7G-5985 [2] CLIP (SLOT)  
97. 7G-5984 [2] CLIP (TAB)  
98. 6V-1876 [2] GROMMET  
99. 146-8054 [2] BRACKET AS (M10X1.50X30MM)  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
100. 7X-0507 [3] WASHER-HARD (12X22.5X5-MM THK)  
101. 140-3681 [1] TUBE AS  
102. 5P-9297 [2] CLIP (LOOP)  
103. 6V-8397 [1] SEAL-O-RING  
104. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
105. 3J-1907 [1] SEAL-O-RING  
106. 6V-8724 [1] ELBOW  
107. 151-2823 [2] ADAPTER  
108. 4J-0520 [3] SEAL-O-RING  
109. 142-4000 Y [1] VALVE GP-STEERING (HMU)  
110. 8T-4196 M [20] BOLT (M10X1.5X35-MM)  
111. 1P-4577 [10] FLANGE-HALF  
112. 7X-2543 M [1] BOLT (M10X1.5X120-MM)  
113. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
114. 6V-8724 [1] ELBOW  
115. 6V-8639 [2] CONNECTOR  
116. 3K-0360 [4] SEAL-O-RING  
117. 8T-6451 [1] ELBOW  
118. 3D-2824 [1] SEAL-O-RING  
119. 8T-1012 [1] TEE-FACE SEAL  
120. 6V-9746 [1] SEAL-O-RING  
121. 136-3103 I [1] HOSE AS  
122. 128-1609 I [1] HOSE AS  
123. 5K-9090 [1] SEAL-O-RING  
124. 146-9039 I [1] HOSE AS  
125. 6V-8398 [6] SEAL-O-RING  
126. 1V-6277 [2] TAG-IDENTIFICATION (LETTER T)  
127. 6V-8936 [1] REDUCER  
128. 6V-9837 [1] TEE-SWIVEL  
129. 6V-9851 [2] ELBOW  
130. 5G-7021 [3] CLIP (TAB)  
131. 5G-7020 [3] CLIP (SLOT)  
132. 5P-7468 [1] CLIP (SLOT)  
133. 5P-8444 [1] GROMMET (37-MM ID)  
134. 5P-7469 [1] CLIP (TAB)  
135. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
136. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
137. 8T-4244 M [3] NUT (M12X1.75-THD)  
138. 5P-7467 [1] CLIP (TAB)  
139. 5P-7466 [1] CLIP (SLOT)  
140. 4J-5267 [1] SEAL-O-RING  
141. 5P-7464 [1] CLIP (SLOT)  
142. 5P-7465 [1] CLIP (TAB)  
143. 6V-7359 [1] GROMMET (25-MM ID, 37-MM OD)  
144. 1P-4576 [2] FLANGE-HALF  
145. 6V-8632 [1] CONNECTOR  
146. 6V-9005 [1] ELBOW  
147. 7J-9108 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440519
 

143-4874: LINES GP-STEERING

143-4874 LINES GP-STEERING
S/N 8JW1-UP
PART OF 126-7783 CHASSIS AR
Type 2
i01315103 SEBP2644
1434874 LINES GP-STEERING Parts scheme 1434874 LINES GP-STEERING Parts scheme 1434874 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [8] SEAL-O-RING  
2. 6V-8639 [6] CONNECTOR  
3. 6V-8397 [18] SEAL-O-RING  
4. 146-9043 I [1] HOSE AS (LABELED R)  
5. 3J-1907 [10] SEAL-O-RING  
6. 6V-8636 C [4] CONNECTOR  
7. 6V-9836 [1] TEE-SWIVEL  
8. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
9. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 136-3109 [1] MANIFOLD  
11. 7M-8485 [3] SEAL-O-RING  
12. 9S-4181 [1] PLUG (1-5/16-12-THD)  
13. 6V-9746 [8] SEAL-O-RING  
14. 136-3105 I [1] HOSE AS (LABELED F)  
15. 3D-2824 [6] SEAL-O-RING  
16. 6V-9004 [1] ELBOW  
17. 6V-8637 [1] CONNECTOR  
18. 6V-8635 [1] CONNECTOR  
19. 147-3148 I [1] HOSE AS (LABELED W)  
20. 8T-8899 [1] ELBOW  
21. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
22. 7G-5985 [3] CLIP (SLOT)  
23. 7G-5984 [3] CLIP (TAB)  
24. 6V-1876 [3] GROMMET  
25. 8T-4121 [55] WASHER-HARD (11X21X2.5-MM THK)  
26. 146-6581 M [2] BOLT-FLAT HEAD (M12X1.75X72-MM)  
27. 8T-4244 M [5] NUT (M12X1.75-THD)  
28. 141-8807 [1] PLATE  
29. 8T-4137 M [13] BOLT (M10X1.5X20-MM)  
30. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
31. 8M-4069 [4] WASHER (10.3X38.1X5-MM THK)  
32. 6N-6984 [4] MOUNT-RUBBER  
33. 147-7343 Y [1] PUMP GP-METERING (HMU)(STEERING)  
34. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
35. 128-1602 [1] BRACKET AS  
  9R-2060 M [4] BOSS (M10X1.5X21-MM)  
36. 4S-1962 [1] CLIP (LOOP)  
37. 4I-7651 [1] TEE-O-RING PORT  
38. 110-5266 C [2] ORIFICE (1.6-MM)  
39. 1P-3706 [1] SEAL-RECTANGULAR  
40. 141-2814 [1] FLANGE  
43. 147-3146 I [1] HOSE AS (LABELED U)  
44. 5K-9090 [4] SEAL-O-RING  
45. 4J-0520 [6] SEAL-O-RING  
46. 7D-7233 [1] CLIP (LOOP)  
47. 6V-8398 [12] SEAL-O-RING  
48. 166-1732 I [1] HOSE AS (LABELED V)  
49. 146-9040 I [1] HOSE AS (LABELED M)  
52. 128-1616 I [1] HOSE AS (LABELED AA)  
53. 146-9041 [1] TUBE AS  
56. 5P-9297 [4] CLIP (LOOP)  
57. 146-9038 I [1] HOSE AS (LABELED K)  
58. 6V-9005 [1] ELBOW  
59. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
60. 1S-0994 [2] CLIP (LOOP)  
61. 205-3614 CI [1] HOSE AS (LABELED A)  
62. 6V-9850 [2] ELBOW  
65. 146-9044 I [1] HOSE AS (LABELED S)  
66. 6V-8632 [1] CONNECTOR  
67. 146-7571 CY [2] VALVE GP-STEERING NEUTRALIZER (HMU)  
68. 8T-4172 M [4] BOLT (M10X1.5X80-MM)  
69. 8T-4133 M [4] NUT (M10X1.5-THD)  
70. 146-9037 I [1] HOSE AS (LABELED J)  
71. 8T-8902 [1] ADAPTER-TEE  
72. 8T-7546 [1] ELBOW  
73. 3J-7354 [1] SEAL-O-RING  
74. 6V-0852 [2] CAP-DUST  
75. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
76. 8T-6663 [1] ADAPTER-PORT  
77. 146-9045 I [1] HOSE AS (LABELED T)  
78. 146-9036 I [1] HOSE AS (LABELED H)  
79. 7J-9108 [1] SEAL-O-RING  
80. 146-9042 I [1] HOSE AS (LABELED P)  
82. 6V-9007 [2] ELBOW  
83. 147-3149 I [1] HOSE AS (LABELED D)  
84. 4J-5267 [1] SEAL-O-RING  
87. 128-1605 [1] TUBE AS  
88. 8T-6684 [1] ELBOW  
91. 147-3150 [1] ANGLE AS  
92. 6D-4244 [1] CLIP (LOOP)  
93. 6D-1641 [2] CLIP (LOOP)  
99. 146-8054 [2] BRACKET AS (M10X1.50X30MM)  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
100. 7X-0507 [3] WASHER-HARD (12X22.5X5-MM THK)  
101. 140-3681 [1] TUBE AS  
104. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
106. 6V-8724 [2] ELBOW  
107. 151-2823 [2] ADAPTER  
109. 142-4000 Y [1] VALVE GP-STEERING (HMU)  
111. 1P-4577 [10] FLANGE-HALF  
112. 7X-2543 M [1] BOLT (M10X1.5X120-MM)  
113. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
117. 8T-6451 [1] ELBOW  
119. 8T-1012 [1] TEE-FACE SEAL  
121. 136-3103 I [1] HOSE AS (LABELED E)  
122. 128-1609 I [1] HOSE AS (LABELED C)  
124. 146-9039 I [1] HOSE AS (LABELED L)  
126. 1P-4576 [2] FLANGE-HALF  
127. 6V-8936 [1] REDUCER  
128. 6V-9837 [1] TEE-SWIVEL  
129. 6V-9851 [2] ELBOW  
130. 5G-7021 [3] CLIP (TAB)  
131. 5G-7020 [3] CLIP (SLOT)  
132. 5P-7468 [1] CLIP (SLOT)  
133. 5P-8444 [1] GROMMET (37-MM ID)  
134. 5P-7469 [1] CLIP (TAB)  
135. 8T-4184 M [7] BOLT (M12X1.75X45-MM)  
138. 5P-7467 [1] CLIP (TAB)  
139. 5P-7466 [1] CLIP (SLOT)  
140. 5P-8112 [1] GROMMET  
141. 5P-7464 [1] CLIP (SLOT)  
142. 5P-7465 [1] CLIP (TAB)  
143. 6V-7359 [1] GROMMET (25-MM ID, 37-MM OD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G :

VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
6E-3373 VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-SHUTOFF
162-7447 VALVE GP-SHUTOFF
VALVE GP-SHUTOFF
143-9354 VALVE GP-SHUTOFF
VALVE GP-SEQUENCE
114-1268 VALVE GP-SEQUENCE
VALVE GP-RELIEF
6E-6185 VALVE GP-RELIEF
VALVE GP-RELIEF
6E-2377 VALVE GP-RELIEF
VALVE GP-SOLENOID
3E-8575 VALVE GP-SOLENOID
CYLINDER & MTG GP-STEERING
112-6956 CYLINDER & MTG GP-STEERING
CYLINDER & MTG GP-STEERING
112-6956 CYLINDER & MTG GP-STEERING
CYLINDER GP-HYDRAULIC
163-0324 CYLINDER GP-HYDRAULIC
CYLINDER GP-STEERING
118-8288 CYLINDER GP-STEERING
CYLINDER GP-STEERING
118-8288 CYLINDER GP-STEERING
LINES GP-SECONDARY STEERING
154-2801 LINES GP-SECONDARY STEERING
LINES GP-STEERING
143-4874 LINES GP-STEERING

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.