521-8409 CYLINDER GP-RIPPER -RH S/N 7ZP1-UP 220-MM (8.7-IN) BORE X 1298-MM (51.2-IN) STROKE PART OF 161-2420 RIPPER AR AN ATTACHMENT D11R

HYDRAULIC SYSTEM

CYLINDER GP

0. 521-8409 CYLINDER G
1. 521-8410 CYLINDER G
2. 521-8411 CYLINDER G
3. 521-8420 CYLINDER G
4. 6E-3113 CYLINDER G
5. 161-7562 CYLINDER G
6. 161-7563 CYLINDER G
7. 1U-2711 CYLINDER G
8. 1U-2711 CYLINDER G
9. 4Z-6413 CYLINDER G
0. INFORMATION

TRACK-TYPE TRACTOR D11R TRACK-TYPE TRACTOR 9TR
D11R Track-Type Tractor 9TR00001-UP (MACHINE) POWERED BY 3508 Engine SEBP2682 D11R 9TR (1997)

HYDRAULIC SYSTEM

CYLINDER GP

521-8407 CYLINDER GP-RIPPER

521-8408 CYLINDER GP-RIPPER

521-8409 CYLINDER GP-RIPPER

521-8410 CYLINDER GP-RIPPER

521-8411 CYLINDER GP-RIPPER

521-8420 CYLINDER GP-RIPPER

#SEBP26820590

521-8409: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

521-8409 CYLINDER GP-RIPPER -RH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.2-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT

i07058230 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	1D-4643	[2]	BOLT (1-8X5.5-IN)
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
4.	5P-8250	[9]	WASHER (28X49X5-MM THK)
5.	6E-0496	[1]	RING-WEAR
6.	6E-5660	[2]	WASHER (71X120X8-MM THK)
7.	8H-5772	[7]	BOLT (1-8X3.75-IN)
8.	9M-5894	[1]	SEAL-O-RING
9.	9X-3579	[1]	RING-WEAR
10.	108-0122	[1]	RING-BACKUP
11.	161-7564	[1]	HEAD
12.	161-7567	[1]	PISTON
13.	192-1425	[1]	SEAL AS
14.	192-2048	[1]	RING-BACKUP
15.	335-8964	[1]	SEAL AS-BUFFER
16.	335-8966	[1]	SEAL-WIPER
17.	341-3191	[1]	SEAL-U-CUP
18.	369-0582	[1]	ROD AS
18A.	9J-1175	[2]	BUSHING
18B.	4J-4955	[1]	SPACER (3X100X5-MM THK)
19.	521-8417	[1]	CYLINDER AS
19A.	9J-1175	[2]	BUSHING
19B.	4J-4955	[1]	SPACER (3X100X5-MM THK)

#SEBP26820591

521-8410: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

521-8410 CYLINDER GP-RIPPER -LH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.2-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT

i07058194 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	1D-4643	[2]	BOLT (1-8X5.5-IN)
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
4.	5P-8250	[9]	WASHER (28X49X5-MM THK)
5.	6E-0496	[1]	RING-WEAR
6.	6E-5660	[2]	WASHER (71X120X8-MM THK)
7.	8H-5772	[7]	BOLT (1-8X3.75-IN)
8.	9M-5894	[1]	SEAL-O-RING
9.	9X-3579	[1]	RING-WEAR
10.	108-0122	[1]	RING-BACKUP
11.	161-7564	[1]	HEAD
12.	161-7567	[1]	PISTON
13.	192-1425	[1]	SEAL AS
14.	192-2048	[1]	RING-BACKUP
15.	335-8964	[1]	SEAL AS-BUFFER
16.	335-8966	[1]	SEAL-WIPER
17.	341-3191	[1]	SEAL-U-CUP
18.	369-0582	[1]	ROD AS
18A.	9J-1175	[2]	BUSHING
18B.	4J-4955	[1]	SPACER (3X100X5-MM THK)
19.	521-8418	[1]	CYLINDER AS
19A.	9J-1175	[2]	BUSHING
19B.	4J-4955	[1]	SPACER (3X100X5-MM THK)

#SEBP26820592

521-8411: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

521-8411 CYLINDER GP-RIPPER -TILT, RH
S/N 7CP1-UP; 7DP1-UP
196.9-MM (7.8-IN) BORE X 830-MM (32.7-IN) STROKE
FIELD REPLACEMENT FOR @@@@@130-3263@@@@@

i07050416 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	1P-4577	[4]	FLANGE-HALF
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
4.	5K-1787	[1]	SEAL-O-RING
5.	5P-8250	[8]	WASHER (28X49X5-MM THK)
6.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
7.	6E-5660	[2]	WASHER (71X120X8-MM THK)
8.	6E-5701	[1]	PISTON
9.	6E-5702	[1]	HEAD
10.	8C-4892	[1]	SEAL-HEAD
11.	8H-5772	[6]	BOLT (1-8X3.75-IN)
12.	8J-0548	[1]	RING-BACKUP
13.	8T-1792	[1]	SEAL AS
14.	8T-3330	[1]	RING-WEAR
15.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	9J-5037	[1]	RING-WEAR
17.	130-3262	[1]	ROD AS
17A.	9J-1175	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
18.	346-5192	[1]	SEAL AS-BUFFER
19.	346-5196	[1]	SEAL-WIPER
20.	346-5200	[1]	SEAL-U-CUP
21.	521-8419	[1]	CYLINDER AS (RH)
21A.	9J-1175	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
22.	1D-4640	[2]	BOLT (1-8X4.25-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820593

521-8420: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

521-8420 CYLINDER GP-RIPPER -TILT, LH
S/N 7CP1-UP; 7DP1-UP
196.85-MM (7.75-IN) BORE X 830-MM (32.7-IN) STROKE
FIELD REPLACEMENT FOR @@@@@130-6381@@@@@

i07050424 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	1P-4577	[4]	FLANGE-HALF
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
4.	5K-1787	[1]	SEAL-O-RING
5.	5P-8250	[8]	WASHER (28X49X5-MM THK)
6.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
7.	6E-5660	[2]	WASHER (71X120X8-MM THK)
8.	6E-5701	[1]	PISTON
9.	6E-5702	[1]	HEAD
	346-5196	[1]	SEAL-WIPER
10.	8C-4892	[1]	SEAL-HEAD
11.	8H-5772	[6]	BOLT (1-8X3.75-IN)
12.	8J-0548	[1]	RING-BACKUP
13.	8T-1792	[1]	SEAL AS
14.	8T-3330	[1]	RING-WEAR
15.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	9J-5037	[1]	RING-WEAR
17.	130-3262	[1]	ROD AS
17A.	9J-1175	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
18.	346-5192	[1]	SEAL AS-BUFFER
19.	346-5196	[1]	SEAL-WIPER
20.	346-5200	[1]	SEAL-U-CUP
21.	521-8424	[1]	CYLINDER AS
21A.	9J-1175	[2]	BUSHING
22.	1D-4640	[2]	BOLT (1-8X4.25-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820594

6E-3113: CYLINDER GP-RIPPER PIN PULLER

CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N 7DP1-99999; 7YP1-UP; 7ZP1-UP; 9TR1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 130-5356 PULLER AR-PIN, 150-5414, 4Z-8842 PULLER GP-PIN
AN ATTACHMENT

i00398832 SEBP2682

6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	173-9779 M	[1]	BOLT (M24X3X80-MM)
2.	6J-2797 J	[1]	RING-WEAR
3.	5J-5402 J	[1]	SEAL AS
4.	9T-3493	[1]	PISTON
5.	6V-8237	[1]	WASHER (26X44X4-MM THK)
6.	4T-6907 J	[1]	RING-WEAR
7.	6E-3980	[1]	ROD AS
8.	231-3539	[1]	SEAL-WIPER
9.	167-2300 J	[1]	SEAL-U-CUP
10.	167-2190 J	[1]	SEAL AS-BUFFER
11.	2K-6830 J	[1]	RING-BACKUP
12.	175-7900 J	[1]	SEAL-O-RING
13.	6E-4976	[1]	HEAD
14.	6E-3976	[1]	CYLINDER AS

			AVAILABLE REPAIR KIT(S):
	240-4819 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP26820595

161-7562: CYLINDER GP-TILT

CYLINDER GP-TILT

161-7562 CYLINDER GP-TILT -RH
S/N 7ZP1-UP
220-MM (8.7-IN.) BORE X 1298-MM (51.1-IN.) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT

i01000623 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	161-7568	[1]	CYLINDER AS
		[1]	BLOCK
	4J-4955	[1]	SPACER (3X100X5-MM THK)
1A.	9J-1175	[2]	BUSHING
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-5660	[2]	WASHER (71X120X8-MM THK)
4.	6E-0496 J	[1]	RING-WEAR
5.	192-1425 J	[1]	SEAL AS
6.	161-7567	[1]	PISTON
7.	9M-5894 J	[1]	SEAL-O-RING
8.	108-0122 J	[1]	RING-BACKUP
9.	161-7564	[1]	HEAD
10.	369-0582	[1]	ROD AS
	4J-4955	[1]	SPACER (3X100X5-MM THK)
10A.	9J-1175	[2]	BUSHING
11.	8H-5772	[7]	BOLT (1-8X3.75-IN)
12.	5P-8250	[9]	WASHER (28X49X5-MM THK)
13.	225-3289 J	[1]	SEAL-WIPER
14.	167-2336 J	[1]	SEAL-U-CUP
15.	167-2220 J	[1]	SEAL AS-BUFFER
16.	9X-3579 J	[1]	RING-WEAR
17.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
18.	192-2048	[2]	RING-BACKUP
19.	1D-4643	[2]	BOLT (1-8X5.5-IN)

			AVAILABLE REPAIR KIT(S):
	229-5546 J	[1]	KIT-GASKET (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
	J		KIT MARKED J SERVICE PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820596

161-7563: CYLINDER GP-TILT

CYLINDER GP-TILT

161-7563 CYLINDER GP-TILT -LH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.1-IN.) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT

i01000624 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	161-7569	[1]	CYLINDER AS (LH)
	4J-4955	[1]	SPACER (3X100X5-MM THK)
1A.	9J-1175	[2]	BUSHING
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-5660	[2]	WASHER (71X120X8-MM THK)
4.	6E-0496	[1]	RING-WEAR
5.	192-1425	[1]	SEAL AS
6.	161-7567	[1]	PISTON
7.	9M-5894	[1]	SEAL-O-RING
8.	108-0122	[1]	RING-BACKUP
9.	161-7564	[1]	HEAD
10.	369-0582	[1]	ROD AS
	4J-4955	[1]	SPACER (3X100X5-MM THK)
10A.	9J-1175	[2]	BUSHING
11.	8H-5772	[7]	BOLT (1-8X3.75-IN)
12.	5P-8250	[9]	WASHER (28X49X5-MM THK)
13.	335-8966	[1]	SEAL-WIPER
14.	341-3191	[1]	SEAL-U-CUP
15.	335-8964	[1]	SEAL AS-BUFFER
16.	9X-3579	[1]	RING-WEAR
17.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
18.	1D-4643	[2]	BOLT (1-8X5.5-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820597

1U-2711: CYLINDER GP-TILT

CYLINDER GP-TILT

1U-2711 CYLINDER GP-TILT -BULLDOZER
S/N 9TR1-UP
266.7MM (10.5 IN.) BORE X 285.8MM (11.28 IN.) STROKE
PART OF 119-4283 CYLINDER AR-TILT
Type 1
AN ATTACHMENT

i00354152 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	1U-1783	[1]	CYLINDER AS
2.	152-7554	[1]	BEARING-SELF-ALIGNING
			-OR-
	357-5362 L	[1]	BEARING-ALIGNING
3.	8J-8905	[2]	RING-LOCK
	3G-7961	[1]	LUG
4.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
5.	8T-1796 N	[1]	SEAL AS
6.	316-6391 C	[1]	PISTON
7.	8L-9241 N	[1]	SEAL-O-RING
8.	7X-4757	[1]	RING-BACKUP
9.	311-9319 JN	[1]	SEAL AS-BUFFER
10.	311-9320 JN	[1]	SEAL-U-CUP
11.	311-9321 JN	[1]	SEAL-WIPER
12.	112-4055	[1]	ROD AS
13.	152-7554	[1]	BEARING-SELF-ALIGNING
			-OR-
	357-5362 L	[1]	BEARING-ALIGNING
	8J-8905	[2]	RING-LOCK
14.	3R-2300	[8]	BOLT (1-1/4-7X4.5-IN)
	4K-0684	[8]	WASHER-HARD (34X55X6-MM THK)
15.	164-6497	[1]	HEAD
16.	4T-2576	[1]	WASHER (82.93X146X11.94-MM THK)
17.	7J-9250	[1]	LOCKNUT (3-1/4X12-THD)
18.	9J-1159 N	[1]	RING-WEAR (260.3-MM ID)
19.	8T-7538 JN	[1]	RING-WEAR
20.	7X-4756 JN	[1]	SEAL
21.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
22.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)

			AVAILABLE REPAIR KIT(S):
	246-0647 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(OVERSIZE BORE 0.76-MM)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	246-0649 N	[1]	KIT-SEAL (HYDRAULIC CYLINDER)(HYDRAULIC CYLINDER)
			(STANDARD SIZE BORE)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		OPTIONAL CARBURIZED & HARDENED BEARING
	N		KIT MARKED N SERVICES PART(S) MARKED N
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820598

1U-2711: CYLINDER GP-TILT

CYLINDER GP-TILT

1U-2711 CYLINDER GP-TILT -BULLDOZER
S/N 9TR1-UP
266.7MM (10.5 IN.) BORE X 285.8MM (11.28 IN.) STROKE
PART OF 119-4283 CYLINDER AR-TILT
Type 2
AN ATTACHMENT

i01083013 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	164-6497 C	[1]	HEAD
2.	316-6391	[1]	PISTON
3.	112-4055	[1]	ROD AS
	8J-8905	[2]	RING-LOCK
	152-7554	[1]	BEARING-SELF-ALIGNING
			-OR-
	357-5362 L	[1]	BEARING-ALIGNING
4.	311-9319 CJN	[1]	SEAL AS-BUFFER
5.	311-9321 CJN	[1]	SEAL-WIPER
6.	157-7244 CN	[1]	RING-BACKUP
7.	1U-1783	[1]	CYLINDER AS
	1U-2532	[2]	BAR
	1U-3658	[1]	HANDLE
	3G-7961	[1]	LUG
	8J-8905	[2]	RING-LOCK
	152-7554	[1]	BEARING-SELF-ALIGNING
			-OR-
	357-5362 L	[1]	BEARING-ALIGNING
8.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
9.	3R-2300	[8]	BOLT (1-1/4-7X4.5-IN)
10.	4K-0684	[8]	WASHER-HARD (34X55X6-MM THK)
11.	4T-2576	[1]	WASHER (82.93X146X11.94-MM THK)
12.	311-9320 CJN	[1]	SEAL-U-CUP
13.	7J-9250	[1]	LOCKNUT (3-1/4X12-THD)
14.	7X-4756 JN	[1]	SEAL
15.	8L-9241 N	[1]	SEAL-O-RING
16.	8T-1796 N	[1]	SEAL AS
17.	8T-7538 JN	[1]	RING-WEAR
18.	9J-1159 N	[1]	RING-WEAR (260.3-MM ID)

			AVAILABLE REPAIR KIT(S):
	246-0647 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(OVERSIZE BORE 0.76-MM)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	246-0649 N	[1]	KIT-SEAL (HYDRAULIC CYLINDER)(HYDRAULIC CYLINDER)
			(STANDARD SIZE BORE)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		OPTIONAL CARBURIZED & HARDENED BEARING
	N		KIT MARKED N SERVICES PART(S) MARKED N
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26820599

4Z-6413: CYLINDER GP-TILT

CYLINDER GP-TILT

4Z-6413 CYLINDER GP-TILT -RH
S/N 7DP1-99999
196.85MM (7.75 IN.) BORE X 1257MM (49.5 IN.) STROKE
PART OF 149-8001 RIPPER AR
AN ATTACHMENT

i00656204 SEBP2682

For full view, you need register

Parts for your D11R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-5660	[2]	WASHER (71X120X8-MM THK)
4.	9J-5037	[1]	RING-WEAR
5.	8T-1792	[1]	SEAL AS
6.	6E-5701	[1]	PISTON
7.	5K-1787	[1]	SEAL-O-RING
8.	8J-0548	[1]	RING-BACKUP
9.	8C-4892	[1]	SEAL-HEAD
10.	151-5672	[1]	HEAD
11.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
12.	9X-8898	[8]	BOLT (1-8X5-IN)
14.	5P-8250	[8]	WASHER (28X49X5-MM THK)
15.	225-3288	[1]	SEAL-WIPER
16.	167-2333	[1]	SEAL-U-CUP
17.	167-2218	[1]	SEAL AS-BUFFER
18.	8T-6748	[1]	RING-WEAR
19.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
20.	4Z-6406	[1]	ROD AS
21.	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING
22.	1P-4577	[4]	FLANGE-HALF
23.	4Z-6411	[1]	CYLINDER AS
24.	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING