AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

126-7789 KICKOUT & POSITIONER GP S/N 4PW1-268 PART OF 148-5658 ELECTRICAL AR 962G WHEEL LOADER


HYDRAULIC SYSTEM
KICKOUT & POSITIONER GP
CYLINDER GP
LINES GP-FRONT
LINES GP-HYDRAULIC
COOLER GP

WHEEL LOADER 962G WHEEL LOADER 4PW
 962G Wheel Loader 4PW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2701 962G 4PW   (1998)

HYDRAULIC SYSTEM

KICKOUT & POSITIONER GP
CONTROL GP-LIFT KICKOUT
145-8670 CONTROL GP-LIFT KICKOUT
CONTROL GP-LIFT KICKOUT
3E-7844 CONTROL GP-LIFT KICKOUT
CONTROL GP-POSITION
116-2025 CONTROL GP-POSITION
CONTROL GP-POSITION
176-5459 CONTROL GP-POSITION
KICKOUT & POSITIONER GP
126-7788 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
 

#SEBP27010480
 

126-7789: KICKOUT & POSITIONER GP

126-7789 KICKOUT & POSITIONER GP
S/N 4PW1-268
PART OF 148-5658 ELECTRICAL AR
i00758429 SEBP2701
1267789 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7844 Y [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 [2] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4E-4894 [1] TUBE AS  
4. 4V-1939 [4] CLAMP  
5. 4V-4840 [1] MAGNET AS  
6. 5G-7820 [1] MAGNET AS  
7. 5V-6439 [2] PLATE  
8. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
9. 087-5421 [1] PLATE  
10. 116-2025 Y [1] CONTROL GP-POSITION (TILT)  
11. 130-5300 [1] CLIP  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010481
 

126-7789: KICKOUT & POSITIONER GP

126-7789 KICKOUT & POSITIONER GP
S/N 4PW269-332
PART OF 148-5658 ELECTRICAL AR
i01048273 SEBP2701
1267789 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8670 CY [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 C [4] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4E-4894 [1] TUBE AS  
4. 4V-1939 [4] CLAMP  
5. 4V-4840 [1] MAGNET AS  
6. 5G-7820 [1] MAGNET AS  
7. 5V-6439 [2] PLATE  
8. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
9. 087-5421 [1] PLATE  
10. 116-2025 Y [1] CONTROL GP-POSITION (TILT)  
11. 130-5300 [1] CLIP  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010482
 

126-7789: KICKOUT & POSITIONER GP

126-7789 KICKOUT & POSITIONER GP
S/N 4PW333-UP
PART OF 148-5658 ELECTRICAL AR
i01314563 SEBP2701
1267789 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8670 Y [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 [4] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4E-4894 [1] TUBE AS  
4. 4V-1939 [4] CLAMP  
5. 4V-4840 [1] MAGNET AS  
6. 5G-7820 [1] MAGNET AS  
7. 5V-6439 [2] PLATE  
8. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
9. 087-5421 [1] PLATE  
10. 176-5459 CY [1] CONTROL GP-POSITION (TILT)  
11. 130-5300 [1] CLIP  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010483
 

126-7789: KICKOUT & POSITIONER GP

126-7789 KICKOUT & POSITIONER GP
S/N 4PW333-568
PART OF 148-5658 ELECTRICAL AR
i01480016 SEBP2701
1267789 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7844 CY [1] CONTROL GP-LIFT KICKOUT  
2. 4B-9806 [4] SETSCREW-SOCKET (1/4-20X0.25-IN)  
3. 4E-4894 [1] TUBE AS  
4. 4V-1939 [4] CLAMP  
5. 4V-4840 [1] MAGNET AS  
6. 5G-7820 [1] MAGNET AS  
7. 5V-6439 [2] PLATE  
8. 7X-7464 M [1] SETSCREW-HEX SOCKET (M10X1.5-THD)  
9. 087-5421 [1] PLATE  
10. 176-5459 Y [1] CONTROL GP-POSITION (TILT)  
11. 130-5300 [1] CLIP  
12. 131-3255 [1] BRACKET  
13. 147-2082 [1] PLATE  
14. 155-4186 [1] HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION)  
15. 155-5167 [1] COVER AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-8132 M [2] BOLT (M24X3X120-MM)  
18. 6V-8237 [2] WASHER (26X44X4-MM THK)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
22. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
23. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4244 M [2] NUT (M12X1.75-THD)  
27. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
28. 9X-2480 M [4] BOLT (M6X1X45-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010484
 

190-7410: LINES GP-COUPLER

190-7410 LINES GP-COUPLER
S/N 4PW1-UP
PART OF 195-7517, 206-4055, 214-7046 CONTROL AR-QUICK COUPLER
i01476342 SEBP2701
1907410 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 9V-9116 [2] SPACER (11.11X19.05X165-MM THK)  
3. 106-8704 [2] SUPPRESSOR AS-ARC  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 130-5300 [1] CLIP  
5. 185-2270 Y [1] VALVE GP-DIVERTER (QUICK COUPLER)(QUICK COUPLER)  
6. 186-0192 [1] HARNESS AS-WORK TOOL (QUICK COUPLER)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
7. 194-6762 [1] TUBE AS  
8. 194-6765 [1] TUBE AS  
9. 194-6766 [1] TUBE AS  
10. 194-6767 [1] TUBE AS  
11. 194-6768 I [2] HOSE AS  
12. 194-6769 I [2] HOSE AS  
13. 194-6770 [1] GUARD  
14. 194-6772 [1] BLOCK  
15. 141-6348 M [2] BOLT (M10X1.5X65-MM)  
16. 201-6849 [1] SWITCH AS (QUICK COUPLER)  
  3E-8825 [1] LAMP (24-VOLT)  
  189-0789 [1] ACTUATOR  
17. 2B-2404 [14] CLIP  
18. 3J-1907 [4] SEAL-O-RING  
19. 4D-7794 [1] CLIP  
20. 4J-5477 [10] SEAL-O-RING  
21. 5K-8451 [1] CLIP (LOOP)  
22. 6V-8627 [1] ELBOW  
23. 6V-8641 [3] CONNECTOR  
24. 6V-9828 [2] CAP (ORFS)  
25. 8T-3851 M [4] BOSS-WELD (M10X1.5X17.5-MM)  
26. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
28. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
29. 9M-8406 [7] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010485
 

126-7738: LINES GP-FRONT

126-7738 LINES GP-FRONT
S/N 4PW1-UP
PART OF 147-5141 HYDRAULIC AR-3 VALVE
i00515137 SEBP2701
1267738 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3704 [2] SEAL-RECTANGULAR  
2. 3W-3392 I [2] HOSE AS  
3. 5H-4020 [2] COVER  
4. 6V-0852 [2] CAP-DUST  
5. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
6. 130-8219 [1] PLATE  
7. 149-8731 [1] BRACKET  
8. 149-8732 [1] BRACKET  
9. 130-9934 [1] TUBE AS  
  7M-8485 [1] SEAL-O-RING  
  8J-0426 [1] PLUG  
10. 130-9935 [1] TUBE AS  
  7M-8485 [1] SEAL-O-RING  
  8J-0426 [1] PLUG  
11. 161-1364 [1] TUBE AS (LH)  
  6K-1694 [3] CLIP  
12. 161-1365 [1] TUBE AS (RH)  
  6K-1694 [3] CLIP  
13. 137-1978 I [1] HOSE AS  
14. 1P-4579 [2] FLANGE-HALF  
15. 3J-1907 [2] SEAL-O-RING  
16. 4J-0522 [7] SEAL-O-RING  
17. 4J-0524 [1] SEAL-O-RING  
18. 6V-0397 [14] FLANGE-HALF  
19. 8T-2561 [6] WASHER-HARD (10.5X28.5X5-MM THK)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [6] NUT (M10X1.5-THD)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
24. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
25. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
26. 8T-4223 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP27010486
 

112-6990: LINES GP-HYDRAULIC

112-6990 LINES GP-HYDRAULIC
S/N 4PW1-UP
PART OF 145-9363 HYDRAULIC AR
i00735991 SEBP2701
1126990 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2201 C [4] CLAMP-HOSE  
2. 8T-4984 C [2] CLAMP-HOSE  
3. 5P-1296 E [2] HOSE (15-CM EACH)  
4. 5P-1293 CE [1] HOSE (13-CM)  
5. 6V-0852 [1] CAP-DUST  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 7V-6428 [1] KEEPER  
8. 8X-4886 C [1] ELBOW  
9. 133-1963 [1] VALVE-BREAKER RELIEF  
10. 125-2041 I [1] HOSE AS  
11. 129-4349 [1] TUBE AS  
  6V-0422 [2] PLUG  
12. 133-6615 [1] PLATE  
13. 134-8203 I [1] HOSE AS  
14. 144-3006 C [1] TUBE AS  
15. 144-3007 C [1] TUBE AS  
16. 144-3008 C [1] TUBE AS  
17. 144-3009 C [1] TUBE AS  
18. 146-6213 CI [1] HOSE AS  
19. 1P-3704 [1] SEAL-RECTANGULAR  
20. 1P-4579 [4] FLANGE-HALF  
21. 3D-2824 [1] SEAL-O-RING  
22. 3E-6735 C [1] SEAL-O-RING  
23. 3J-1907 [2] SEAL-O-RING  
24. 4J-0522 C [5] SEAL-O-RING  
25. 4J-0524 [2] SEAL-O-RING  
26. 4J-0527 C [1] SEAL-O-RING  
27. 5P-7470 [1] CLIP (SLOT)  
28. 5P-7471 [1] CLIP (TAB)  
29. 5P-8182 [1] GROMMET (46-MM ID)  
30. 6V-0397 [8] FLANGE-HALF  
31. 6V-8397 [1] SEAL-O-RING  
32. 7G-3413 [1] CLIP (SLOT)  
33. 7G-3414 [1] CLIP (TAB)  
34. 7G-3415 [1] GROMMET  
35. 8C-8992 M [1] BOLT-LOCKING (M12X1.75X30-MM)  
36. 8T-0788 [1] ELBOW  
37. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
38. 8T-4140 CM [4] BOLT (M16X2X60-MM)  
39. 8T-4183 M [20] BOLT (M12X1.75X40-MM)  
40. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
41. 8T-4223 C [37] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4910 CM [2] BOLT (M12X1.75X60-MM)  
43. 8T-4956 CM [8] BOLT (M12X1.75X35-MM)  
44. 8T-6663 [1] ADAPTER-PORT  
45. 8T-6868 CM [6] BOLT (M12X1.75X80-MM)  
46. 8T-7338 M [4] BOLT (M16X2X45-MM)  
47. 9M-2092 C [1] SEAL-O-RING  
48. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
49. 7X-3392 [4] WASHER-HARD (13.5X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP27010487
 

145-4673: LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4PW1-259
PART OF 126-7786 CHASSIS AR
i00758578 SEBP2701
1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme 1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 6W-5458 [2] SPACER (0.406X0.75X0.5-IN THK)  
4. 8C-6712 [1] ELBOW  
5. 8T-0083 [1] TEE-UNION  
6. 134-3016 Y [1] FILTER GP-OIL (HYDRAULIC)  
7. 146-3197 I [1] HOSE AS  
8. 146-3198 I [1] HOSE AS  
9. 146-3199 I [1] HOSE AS  
10. 146-3200 I [1] HOSE AS  
11. 146-3201 I [1] HOSE AS  
12. 146-3202 I [1] HOSE AS  
13. 146-3204 [1] BRACKET  
14. 150-8380 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
15. 150-8381 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 1S-0994 [9] CLIP (LOOP)  
17. 3D-2824 [5] SEAL-O-RING  
18. 3J-1907 [2] SEAL-O-RING  
19. 3J-7354 [2] SEAL-O-RING  
20. 5G-7020 [1] CLIP (SLOT)  
21. 5G-7021 [1] CLIP (TAB)  
22. 5K-9090 [2] SEAL-O-RING  
23. 5P-7468 [1] CLIP (SLOT)  
24. 5P-7469 [1] CLIP (TAB)  
25. 5P-7854 [6] CLIP  
26. 5P-8444 [1] GROMMET (37-MM ID)  
27. 6V-1889 [17] CLIP (LOOP)  
28. 6V-8398 [2] SEAL-O-RING  
29. 6V-8637 [2] CONNECTOR  
30. 6V-9005 [1] ELBOW  
31. 6V-9007 [3] ELBOW  
32. 6V-9746 [11] SEAL-O-RING  
33. 6V-9853 [1] ELBOW  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7M-8485 [1] SEAL-O-RING  
36. 8D-9671 [2] CLIP  
37. 8T-2353 [1] ADAPTER  
38. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4133 M [11] NUT (M10X1.5-THD)  
40. 8T-4136 M [17] BOLT (M10X1.5X25-MM)  
41. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
42. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
43. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 8T-8899 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010488
 

145-4673: LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4PW260-UP
PART OF 126-7786 CHASSIS AR
i01009190 SEBP2701
1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme 1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 6W-5458 [2] SPACER (0.406X0.75X0.5-IN THK)  
4. 8C-6712 [1] ELBOW  
5. 8T-0083 [1] TEE-UNION  
6. 134-3016 Y [1] FILTER GP-OIL (HYDRAULIC)  
7. 163-0573 CI [1] HOSE AS  
8. 146-3198 I [1] HOSE AS  
9. 146-3199 I [1] HOSE AS  
10. 146-3200 I [1] HOSE AS  
11. 8R-2477 I [1] HOSE AS  
12. 146-3202 I [1] HOSE AS  
13. 146-3204 [1] BRACKET  
14. 150-8380 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
15. 150-8381 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 1S-0994 [9] CLIP (LOOP)  
17. 3D-2824 [5] SEAL-O-RING  
18. 3J-1907 [2] SEAL-O-RING  
19. 3J-7354 [2] SEAL-O-RING  
20. 5G-7020 [1] CLIP (SLOT)  
21. 5G-7021 [1] CLIP (TAB)  
22. 5K-9090 [2] SEAL-O-RING  
23. 5P-7468 [1] CLIP (SLOT)  
24. 5P-7469 [1] CLIP (TAB)  
25. 5P-7854 [6] CLIP  
26. 5P-8444 [1] GROMMET (37-MM ID)  
27. 6V-1889 [17] CLIP (LOOP)  
28. 6V-8398 [2] SEAL-O-RING  
29. 6V-8637 [2] CONNECTOR  
30. 6V-8625 C [1] ELBOW  
31. 6V-9007 [3] ELBOW  
32. 6V-9746 [11] SEAL-O-RING  
33. 6V-9853 [1] ELBOW  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7M-8485 [1] SEAL-O-RING  
36. 8D-9671 [2] CLIP  
37. 8T-2353 [1] ADAPTER  
38. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4133 M [11] NUT (M10X1.5-THD)  
40. 8T-4136 M [17] BOLT (M10X1.5X25-MM)  
41. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
42. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
43. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 8T-8899 [1] ELBOW  
46. 3K-0360 C [1] SEAL-O-RING  
47. 6V-8635 C [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27010489
 

145-4673: LINES GP-HYDRAULIC OIL COOLER

145-4673 LINES GP-HYDRAULIC OIL COOLER
S/N 4PW260-393
PART OF 126-7786 CHASSIS AR
i01197204 SEBP2701
1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme 1454673 LINES GP-HYDRAULIC OIL COOLER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 6W-5458 [2] SPACER (0.406X0.75X0.5-IN THK)  
4. 8C-6712 [1] ELBOW  
5. 8T-0083 [1] TEE-UNION  
6. 134-3016 Y [1] FILTER GP-OIL (HYDRAULIC)  
7. 163-0573 I [1] HOSE AS  
8. 146-3198 I [1] HOSE AS  
9. 146-3199 I [1] HOSE AS  
10. 146-3200 I [1] HOSE AS  
11. 8R-2477 I [1] HOSE AS  
12. 146-3202 I [1] HOSE AS  
13. 146-3204 [1] BRACKET  
14. 150-8380 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
15. 150-8381 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 1S-0994 [9] CLIP (LOOP)  
17. 3D-2824 [5] SEAL-O-RING  
18. 3J-1907 [2] SEAL-O-RING  
19. 3J-7354 [2] SEAL-O-RING  
20. 5G-7020 [1] CLIP (SLOT)  
21. 5G-7021 [1] CLIP (TAB)  
22. 5K-9090 [2] SEAL-O-RING  
23. 5P-7468 [1] CLIP (SLOT)  
24. 5P-7469 [1] CLIP (TAB)  
25. 5P-7854 [6] CLIP  
26. 5P-8444 [1] GROMMET (37-MM ID)  
27. 6V-1889 [17] CLIP (LOOP)  
28. 6V-8398 [2] SEAL-O-RING  
29. 6V-8637 [2] CONNECTOR  
30. 6V-8625 [1] ELBOW  
31. 6V-9007 [3] ELBOW  
32. 6V-9746 [11] SEAL-O-RING  
33. 6V-9853 [1] ELBOW  
34. 7D-7233 C [3] CLIP (LOOP)  
35. 7M-8485 [1] SEAL-O-RING  
36. 8D-9671 [2] CLIP  
37. 8T-2353 [1] ADAPTER  
38. 8T-4121 C [31] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4133 M [11] NUT (M10X1.5-THD)  
40. 8T-4136 CM [18] BOLT (M10X1.5X25-MM)  
41. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
42. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
43. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 8T-8899 [1] ELBOW  
46. 3K-0360 [1] SEAL-O-RING  
47. 6V-8635 [1] CONNECTOR  
48. 7K-1181 [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 962G :

KICKOUT & POSITIONER GP
126-7788 KICKOUT & POSITIONER GP
147-5141 HYDRAULIC AR-3 VALVE
145-9363 HYDRAULIC AR
GUARD GP-LIFT CYLINDER
216-8319 GUARD GP-LIFT CYLINDER
GUARD GP-LIFT CYLINDER
216-8318 GUARD GP-LIFT CYLINDER
GUARD GP-LIFT CYLINDER
211-6947 GUARD GP-LIFT CYLINDER
FILTER GP-OIL
134-3016 FILTER GP-OIL
CYLINDER GP-TILT
129-4447 CYLINDER GP-TILT
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
126-7789 KICKOUT & POSITIONER GP
LINES GP-COUPLER
190-7410 LINES GP-COUPLER
LINES GP-FRONT
126-7738 LINES GP-FRONT
LINES GP-HYDRAULIC
112-6990 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC OIL COOLER
145-4673 LINES GP-HYDRAULIC OIL COOLER
LINES GP-HYDRAULIC OIL COOLER
145-4673 LINES GP-HYDRAULIC OIL COOLER

Truck sale:

Caterpillar 962G
 
Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Wielladers, Bouw
59.000 
Caterpillar 962G, Wielladers, Bouw

QUINN COMPANY
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
96.768 
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.