HYDRAULIC SYSTEM
CYLINDER GPFILTER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP27030430
133-2964: CYLINDER GP-LIFT
133-2964 CYLINDER GP-LIFT -LH
S/N 4WW1-UP
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
S/N 4WW1-UP
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-4048 | [1] | CYLINDER AS | |
| 9T-8676 | [1] | BUSHING | ||
| 2. | 3J-9449 | [1] | LOCKNUT (2-1/2-12-THD) | |
| 3. | 8T-1789 | [1] | SEAL AS | |
| 4. | 8M-4228 | [1] | RING-WEAR | |
| 5. | 6E-1440 | [1] | PISTON | |
| 6. | 8J-1665 | [1] | SEAL-O-RING | |
| 7. | 9X-7273 | [1] | RING-BACKUP | |
| 8. | 133-4046 | [1] | HEAD | |
| 9. | 133-4047 | [1] | ROD AS | |
| 10. | 9T-2584 | [1] | RING-RETAINING (INTERNAL) | |
| 11. | 8T-8389 | [1] | SEAL-WIPER | |
| 12. | 5J-8325 | [1] | SEAL-U-CUP | |
| 13. | 8C-9121 | [1] | SEAL AS | |
| 14. | 8T-6745 | [1] | RING-WEAR | |
| 15. | 8T-0362 M | [2] | BOLT (M20X2.5X110-MM) | |
| 16. | 6V-3669 M | [6] | BOLT (M20X2.5X80-MM) | |
| 17. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27030431
133-2964: CYLINDER GP-LIFT
133-2964 CYLINDER GP-LIFT -LH
S/N 4WW1-99999
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
S/N 4WW1-99999
177.8MM BORE X 833MM STROKE
PART OF 119-4422 CYLINDER & SEAL GP-LIFT
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-4048 | [1] | CYLINDER AS | |
| 1A. | 9T-8676 | [1] | BUSHING | |
| 2. | 3J-9449 | [1] | LOCKNUT (2-1/2-12-THD) | |
| 3. | 8T-1789 J | [1] | SEAL AS | |
| 4. | 8M-4228 J | [1] | RING-WEAR | |
| 5. | 6E-1440 | [1] | PISTON | |
| 6. | 8J-1665 J | [1] | SEAL-O-RING | |
| 7. | 9X-7273 J | [1] | RING-BACKUP | |
| 8. | 133-4046 | [1] | HEAD | |
| 9. | 133-4047 | [1] | ROD AS | |
| 10. | 225-3285 CJ | [1] | SEAL-WIPER | |
| 11. | 167-2320 CJ | [1] | SEAL-U-CUP | |
| 12. | 167-2209 CJ | [1] | SEAL AS-BUFFER | |
| 13. | 8T-6745 J | [1] | RING-WEAR | |
| 14. | 8T-0362 M | [2] | BOLT (M20X2.5X110-MM) | |
| 15. | 6V-3669 M | [6] | BOLT (M20X2.5X80-MM) | |
| 16. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 228-1779 J | [1] | KIT-SEAL (LIFT CYLINDER) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27030432
133-2962: CYLINDER GP-TILT
133-2962 CYLINDER GP-TILT
S/N 4WW1-341
235MM BORE X 535MM STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
S/N 4WW1-341
235MM BORE X 535MM STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-6179 | [1] | CYLINDER AS | |
| 9J-7100 | [1] | BUSHING | ||
| 2. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 3. | 7J-2087 J | [1] | RING-WEAR | |
| 4. | 4T-4143 J | [1] | SEAL AS | |
| 5. | 7J-4083 | [1] | PISTON | |
| 6. | 173-7756 | [2] | WASHER (70.08X114X6.35-MM THK) | |
| 7. | 8F-6230 J | [1] | SEAL-O-RING | |
| 8. | 3J-8466 J | [1] | RING-BACKUP | |
| 9. | 133-6178 | [1] | HEAD | |
| 10. | 8T-0666 M | [6] | BOLT (M24X3X90-MM) | |
| 11. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 12. | 8T-0668 M | [2] | BOLT (M24X3X110-MM) | |
| 13. | 173-7755 | [1] | ROD AS | |
| 9J-7099 | [1] | BUSHING | ||
| 14. | 8T-6745 J | [1] | RING-WEAR | |
| 15. | 346-5193 J | [1] | SEAL AS-BUFFER | |
| 16. | 346-5201 J | [1] | SEAL-U-CUP | |
| 17. | 346-5199 J | [1] | SEAL-WIPER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 381-2337 J | [1] | KIT-HYD CYLINDER SEAL | ||
| (KIT INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27030433
188-2445: CYLINDER GP-TILT
188-2445 CYLINDER GP-TILT
S/N 4WW342-99999
235 MM (9.25 IN) BORE X 535 MM (21.06 IN) STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
S/N 4WW342-99999
235 MM (9.25 IN) BORE X 535 MM (21.06 IN) STROKE
PART OF 119-4425 CYLINDER & SEAL GP-TILT
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-6179 | [1] | CYLINDER AS | |
| 9J-7100 | [1] | BUSHING | ||
| 2. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 3. | 7J-2087 | [1] | RING-WEAR | |
| 4. | 4T-4143 | [1] | SEAL AS | |
| 5. | 187-6650 | [1] | PISTON | |
| 6. | 173-7756 | [1] | WASHER (70.08X114X6.35-MM THK) | |
| 7. | 8F-6230 | [1] | SEAL-O-RING | |
| 8. | 3J-8466 | [1] | RING-BACKUP | |
| 9. | 188-2447 | [1] | HEAD | |
| 10. | 8T-0666 M | [6] | BOLT (M24X3X90-MM) | |
| 11. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 12. | 8T-0668 M | [2] | BOLT (M24X3X110-MM) | |
| 13. | 188-2448 | [1] | ROD AS | |
| 9J-7099 | [1] | BUSHING | ||
| 14. | 132-4907 | [1] | RING-WEAR | |
| 15. | 167-2211 | [1] | SEAL AS-BUFFER | |
| 16. | 167-2324 | [1] | SEAL-U-CUP | |
| 17. | 225-3286 | [1] | SEAL-WIPER | |
| 18. | 187-6651 | [1] | WASHER (70.08X114X12.7-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP27030434
134-3016: FILTER GP-OIL
134-3016 FILTER GP-OIL -HYDRAULIC
S/N 4WW1-UP
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
S/N 4WW1-UP
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS#SEBP27030435
199-2745: FILTER GP-OIL
199-2745 FILTER GP-OIL -HYDRAULIC
S/N 4WW521-99999
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
S/N 4WW521-99999
PART OF 161-9664 LINES GP-HYDRAULIC OIL COOLER
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS#SEBP27030436
146-2737: HYDRAULIC AR-2 VALVE
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 119-4422 Y | [1] | CYLINDER & SEAL GP-LIFT (LH) | ||
| 119-4423 Y | [1] | CYLINDER & SEAL GP-LIFT (RH) | ||
| 119-4425 Y | [1] | CYLINDER & SEAL GP-TILT | ||
| 119-4421 Y | [1] | LINES GP-HYDRAULIC | ||
| 119-4426 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 143-7838 Y | [1] | LINES GP-PILOT | ||
| 119-4424 Y | [1] | LINES GP-TILT CYLINDER | ||
| 122-7196 Y | [1] | MOUNTING GP-HYDRAULIC TANK | ||
| 133-7337 Y | [1] | PUMP & MTG GP-HYDRAULIC | ||
| 133-1843 Y | [1] | TANK GP-HYDRAULIC | ||
| 143-6003 Y | [1] | VALVE & MTG GP-MAIN CONTROL (2-FUNCTION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27030437
145-1338: HYDRAULIC AR-3 VALVE
145-1338 HYDRAULIC AR-3 VALVE
S/N 4WW1-UP
S/N 4WW1-UP
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 153-0401 Y | [1] | CONTROL GP-PILOT OPERATED HYD (3-FUNCTION) | ||
| 133-9187 Y | [1] | LINES GP-FRONT | ||
| 144-3796 Y | [1] | LINES GP-PILOT (3-VALVE) | ||
| 149-2584 Y | [1] | LINES GP-PILOT (3-LEVER) | ||
| 143-6004 Y | [1] | VALVE & MTG GP-MAIN CONTROL (3-FUNCTION) | ||
| 140-7412 | [1] | ARM & BEARING AS-LIFT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27030438
146-3660: KICKOUT & POSITIONER GP
146-3660 KICKOUT & POSITIONER GP
S/N 4WW1-UP
PART OF 148-7177 ELECTRICAL AR
Type 1
S/N 4WW1-UP
PART OF 148-7177 ELECTRICAL AR
Type 1
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 2. | 3T-3045 | [1] | CLIP AS | |
| 3. | 3V-3827 | [1] | BAR | |
| 4. | 4V-1939 | [4] | CLAMP | |
| 5. | 4V-4840 | [1] | MAGNET AS | |
| 6. | 5G-7820 | [1] | MAGNET AS | |
| 7. | 5V-6439 | [2] | PLATE | |
| 8. | 7X-7464 M | [1] | SETSCREW-HEX SOCKET (M10X1.5-THD) | |
| 9. | 8T-3601 | [4] | SETSCREW-SOCKET (1/4-20-THD) | |
| 10. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| 11. | 117-1324 | [1] | CONTROL GP-POSITION (WORK TOOL) | |
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7782 | [1] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 9X-5617 | [1] | FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER) | ||
| 12. | 131-3246 | [1] | COVER AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 13. | 131-3253 | [1] | TUBE AS | |
| 14. | 136-1871 | [1] | HARNESS AS-WORK TOOL | |
| 15. | 137-6630 | [1] | BRACKET | |
| 16. | 147-2082 | [1] | PLATE | |
| 17. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 18. | 4D-7794 | [1] | CLIP | |
| 19. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
| 21. | 6V-5218 M | [2] | BOLT (M8X1.25X35-MM) | |
| 22. | 6V-8237 | [2] | WASHER (26X44X4-MM THK) | |
| 23. | 8T-0669 M | [2] | BOLT (M24X3X130-MM) | |
| 24. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 26. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 27. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 30. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27030439
146-3660: KICKOUT & POSITIONER GP
146-3660 KICKOUT & POSITIONER GP
S/N 4WW1-UP
PART OF 148-7177 ELECTRICAL AR
Type 2
S/N 4WW1-UP
PART OF 148-7177 ELECTRICAL AR
Type 2
For full view, you need register
Parts for your 972G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-5559 C | [1] | BRACKET | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 4. | 4V-1939 | [4] | CLAMP | |
| 5. | 4V-4840 | [1] | MAGNET AS | |
| 6. | 5V-1410 C | [1] | HOLDER (SWITCH) | |
| 7. | 5V-2787 C | [1] | MAGNET AS | |
| 8. | 5V-6439 | [2] | PLATE | |
| 9. | 7X-7464 M | [1] | SETSCREW-HEX SOCKET (M10X1.5-THD) | |
| 10. | 137-6630 | [1] | BRACKET | |
| 11. | 8T-3601 | [4] | SETSCREW-SOCKET (1/4-20-THD) | |
| 12. | 116-2025 Y | [1] | CONTROL GP-POSITION (WORK TOOL) | |
| 13. | 130-5300 C | [1] | CLIP | |
| 14. | 131-3246 | [1] | COVER AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 15. | 4E-5210 | [1] | TUBE AS | |
| 16. | 154-9000 | [1] | HARNESS AS-WORK TOOL | |
| 17. | 9X-8256 C | [4] | WASHER (6.6X12X2-MM THK) | |
| 18. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 19. | 4D-7794 | [1] | CLIP | |
| 20. | 5C-9553 CM | [2] | BOLT (M6X1X16-MM) | |
| 21. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 6V-8237 | [2] | WASHER (26X44X4-MM THK) | |
| 23. | 7X-2534 CM | [4] | BOLT (M6X1X50-MM) | |
| 24. | 8T-4908 CM | [2] | BOLT (M8X1.25X25-MM) | |
| 25. | 7X-7729 C | [2] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-0669 M | [2] | BOLT (M24X3X130-MM) | |
| 27. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 30. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 31. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 32. | 8T-4195 CM | [2] | BOLT (M10X1.5X30-MM) | |
| 33. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 8T-4896 C | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
