AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

152-9757 CYLINDER & MTG GP-LIFT S/N 2KZ1-UP PART OF 152-9753 HYDRAULIC AR 844 WHEEL DOZER


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-HYDRAULIC

WHEEL DOZER 844 WHEEL DOZER 2KZ
 844 Wheel Tractor 2KZ00001-UP (MACHINE) POWERED BY 3412E Engine SEBP2765 844 2KZ   (1998)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-LIFT
152-9757 CYLINDER & MTG GP-LIFT
CYLINDER & VALVE GP-LIFT
153-1777 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
153-1778 CYLINDER & VALVE GP-LIFT
CYLINDER GP-LIFT
4Z-6424 CYLINDER GP-LIFT
CYLINDER GP-TILT & TIP
6E-4835 CYLINDER GP-TILT & TIP
CYLINDER GP-TILT & TIP
6E-4836 CYLINDER GP-TILT & TIP
 

#SEBP27650380
 

152-9757: CYLINDER & MTG GP-LIFT

152-9757 CYLINDER & MTG GP-LIFT
S/N 2KZ1-UP
PART OF 152-9753 HYDRAULIC AR
i00745860 SEBP2765
1529757 CYLINDER & MTG GP-LIFT Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 4T-4875 [2] PIN  
3. 5P-5520 [2] SEAL-LIP TYPE  
4. 6Y-2651 [2] YOKE  
5. 9J-5717 [2] COVER  
6. 9J-5718 [2] GASKET  
7. 9J-7625 [4] CAP AS  
    (EACH INCLUDES)
  9J-5284 [1] BUSHING  
8. 153-1777 Y [1] CYLINDER & VALVE GP-LIFT (RH)  
9. 153-1778 Y [1] CYLINDER & VALVE GP-LIFT (LH)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
12. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
13. 8T-9312 [8] BOLT (3/4-10X6-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27650381
 

153-1777: CYLINDER & VALVE GP-LIFT

153-1777 CYLINDER & VALVE GP-LIFT -RH
S/N 2KZ1-UP
PART OF 152-9757 CYLINDER & MTG GP-LIFT
i00748786 SEBP2765
1531777 CYLINDER & VALVE GP-LIFT Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0910 [1] CAP-BEARING  
2. 3G-0911 B [12] SHIM (0.8-MM THK)  
3. 4T-4204 Y [1] VALVE GP-QUICK-DROP  
4. 4Z-6424 Y [1] CYLINDER GP-LIFT  
5. 7T-4890 [1] PLATE  
6. 9P-8514 [1] TUBE AS  
7. 1P-3704 [2] SEAL-RECTANGULAR  
8. 1P-4577 [4] FLANGE-HALF  
9. 1P-5761 [2] FLANGE-HALF  
10. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
12. 7X-0392 [4] BOLT (7/8-9X6-IN)  
13. 7X-0449 [4] NUT-FULL (7/8-9-THD)  
14. 8C-6877 [4] BOLT (7/16-14X1.75-IN)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
17. 8T-7008 [4] BOLT (3/8-16X3-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP27650382
 

153-1778: CYLINDER & VALVE GP-LIFT

153-1778 CYLINDER & VALVE GP-LIFT -LH
S/N 2KZ1-UP
PART OF 152-9757 CYLINDER & MTG GP-LIFT
i00748787 SEBP2765
1531778 CYLINDER & VALVE GP-LIFT Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0910 [1] CAP-BEARING  
2. 3G-0911 B [12] SHIM (0.8-MM THK)  
3. 4T-4204 Y [1] VALVE GP-QUICK-DROP  
4. 4Z-6424 Y [1] CYLINDER GP-LIFT  
5. 7G-4844 [1] TUBE AS  
6. 7T-4890 [1] PLATE  
7. 1P-3704 [2] SEAL-RECTANGULAR  
8. 1P-4577 [4] FLANGE-HALF  
9. 1P-5761 [2] FLANGE-HALF  
10. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
12. 7X-0392 [4] BOLT (7/8-9X6-IN)  
13. 7X-0449 [4] NUT-FULL (7/8-9-THD)  
14. 8C-6877 [4] BOLT (7/16-14X1.75-IN)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
17. 8T-7008 [4] BOLT (3/8-16X3-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP27650383
 

4Z-6424: CYLINDER GP-LIFT

4Z-6424 CYLINDER GP-LIFT
S/N 2KZ1-UP
133.35 MM (5.25 IN) BORE X 1535 MM (60.4 IN) STROKE
PART OF 153-1777, 153-1778 CYLINDER & VALVE GP-LIFT
i00760153 SEBP2765
4Z6424 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8194 [1] CYLINDER AS  
1A. 5J-1192 [2] BUSHING  
2. 5J-5731 [1] LOCKNUT (1-3/4-12-THD)  
3. 3G-8191 [1] WASHER (44.83X73X9.5-MM THK)  
4. 9J-7978 J [1] RING-WEAR  
5. 8T-0763 J [1] SEAL AS  
6. 4Z-6423 [1] PISTON AS  
  4Z-6422 [4] INSERT  
  5J-2528 [2] PLUNGER  
7. 5F-3106 J [1] SEAL-O-RING  
8. 2J-7767 J [1] RING-BACKUP  
9. 106-6267 [1] HEAD  
10. 4T-0406 [1] ROD AS  
11. 312-4247 HJ [1] SEAL-WIPER  
12. 9T-0094 HJ [1] RING-WEAR  
13. 9X-7412 [1] SEAL-U-CUP  
14. 312-4248 HJ [1] SEAL AS-BUFFER  
15. 1D-4610 [4] BOLT (3/4-10X3.25-IN)  
16. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
17. 3G-0910 [1] CAP-BEARING  
18. 3G-0911 B [12] SHIM (0.8-MM THK)  
19. 7X-0392 [4] BOLT (7/8-9X6-IN)  
20. 7X-0449 [4] NUT-FULL (7/8-9-THD)  
   
    AVAILABLE REPAIR KIT(S):
  319-3561 J [1] KIT-SEAL  
    (ALSO INCLUDES U-CUP SEAL)
  319-3564 H [1] KIT-SEAL  
    (ALSO INCLUDES O-RING, SEAL AS, WEAR-RING, SEAL-HEAD, U-CUP SEAL)
  B   USE AS REQUIRED
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27650384
 

6E-4835: CYLINDER GP-TILT & TIP

6E-4835 CYLINDER GP-TILT & TIP -LH
S/N 2KZ1-UP
209.55 MM (8.25 IN) BORE X 188 MM (7.4 IN) STROKE
PART OF 149-5957 PUSH ARM GP
i00400846 SEBP2765
6E4835 CYLINDER GP-TILT & TIP Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4858 [1] CYLINDER AS (LH)  
2. 1U-2182 [2] BUSHING  
3. 4J-7376 J [1] RING-WEAR  
4. 8T-1793 J [1] SEAL AS  
5. 8T-8382 J [1] SEAL-HEAD  
6. 9T-1878 [2] WASHER (70.5X120X4.76-MM THK)  
7. 8J-4386 J [1] SEAL-O-RING  
8. 3G-3747 J [1] RING-BACKUP  
9. 9T-5283 [1] HEAD  
10. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
11. 5M-0544 [6] BOLT (1-1/8-7X4.5-IN)  
  3S-1349 [6] WASHER-HARD (31X52.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
13. 167-2474 J [1] SEAL-WIPER  
14. 167-2324 J [1] SEAL-U-CUP  
15. 167-2211 J [1] SEAL AS-BUFFER  
16. 8T-3329 J [1] RING-WEAR  
17. 122-9350 [1] PISTON AS  
18. 1J-8569 [2] INSERT-PISTON  
19. 2H-3932 [2] SEAL-O-RING  
20. 109-4670 [2] INSERT  
21. 122-9351 [2] PLUNGER  
22. 3K-8692 [4] RING-BACKUP  
23. 6E-4859 [1] ROD AS  
24. 6V-3340 [1] BEARING-SPHERICAL  
25. 5J-9454 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  245-6835 J [1] KIT-SEAL (TILT, TIP CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27650385
 

6E-4836: CYLINDER GP-TILT & TIP

6E-4836 CYLINDER GP-TILT & TIP -RH
S/N 2KZ1-UP
209.55 MM (8.25 IN) BORE X 188 MM (7.4 IN) STROKE
PART OF 149-5956 PUSH ARM GP
i00400847 SEBP2765
6E4836 CYLINDER GP-TILT & TIP Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4857 [1] CYLINDER AS (RH)  
2. 1U-2182 [2] BUSHING  
3. 4J-7376 J [1] RING-WEAR  
4. 8T-1793 J [1] SEAL AS  
5. 8T-8382 J [1] SEAL-HEAD  
6. 9T-1878 [2] WASHER (70.5X120X4.76-MM THK)  
7. 8J-4386 J [1] SEAL-O-RING  
8. 3G-3747 J [1] RING-BACKUP  
9. 9T-5283 [1] HEAD  
10. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
11. 5M-0544 [6] BOLT (1-1/8-7X4.5-IN)  
  3S-1349 [6] WASHER-HARD (31X52.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
13. 167-2474 J [1] SEAL-WIPER  
14. 167-2324 J [1] SEAL-U-CUP  
15. 167-2211 J [1] SEAL AS-BUFFER  
16. 8T-3329 J [1] RING-WEAR  
17. 122-9350 [1] PISTON AS  
18. 1J-8569 [2] INSERT-PISTON  
19. 2H-3932 [2] SEAL-O-RING  
20. 109-4670 [2] INSERT  
21. 122-9351 [2] PLUNGER  
22. 3K-8692 [4] RING-BACKUP  
23. 6E-4859 [1] ROD AS  
24. 6V-3340 [1] BEARING-SPHERICAL  
25. 5J-9454 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  245-6835 J [1] KIT-SEAL (TILT, TIP CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27650386
 

152-9753: HYDRAULIC AR

152-9753 HYDRAULIC AR
S/N 2KZ294-UP
PART OF 152-9751 GENERAL AR
i00751395 SEBP2765
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  152-9757 Y [1] CYLINDER & MTG GP-LIFT  
  8R-5663 Y [1] CYLINDER & MTG GP-STEERING  
  152-9758 Y [1] LINES GP-HYDRAULIC  
  4E-9659 Y [1] LINES GP-HYDRAULIC FAN  
  8R-5670 Y [1] LINES GP-HYDRAULIC OIL COOLER  
  152-9759 Y [1] LINES GP-LIFT CYLINDER  
  3Q-6232 Y [1] LINES GP-PILOT  
  8R-5668 Y [1] LINES GP-STEERING  
  152-9760 Y [1] LINES GP-TILT CYLINDER  
  152-9761 Y [1] PUMP & MTG GP-IMPLEMENT  
  8R-5676 Y [1] PUMP & MTG GP-PILOT & BRAKE  
  8R-5678 Y [1] PUMP & MTG GP-STEERING & FAN  
  8R-5673 Y [1] TANK & MTG GP-HYDRAULIC (IMPLEMENT, BRAKE)  
  8R-5674 Y [1] TANK & MTG GP-HYDRAULIC (HYDRAULIC FAN, STEERING)  
  8R-5680 Y [1] VALVE & LINES GP-STEERING NEUT  
  152-9762 Y [1] VALVE & MTG GP-MAIN CONTROL  
  152-9763 Y [1] VALVE & MTG GP-TILT & TIP CONT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27650387
 

152-9758: LINES GP-HYDRAULIC

152-9758 LINES GP-HYDRAULIC
S/N 2KZ1-UP
PART OF 152-9753 HYDRAULIC AR
i00751396 SEBP2765
1529758 LINES GP-HYDRAULIC Parts scheme 1529758 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4510 [4] LOCKWASHER  
2. 4E-7789 [1] CLAMP-HALF  
3. 4E-8286 I [1] HOSE AS  
4. 5V-9354 [1] U-BOLT  
5. 7I-3711 [1] CLAMP-HALF  
6. 7V-8532 [1] SPACER  
7. 9P-2390 [1] BLOCK-GAUGE TAP  
8. 152-7737 I [1] HOSE AS  
9. 152-7739 I [1] HOSE AS  
10. 152-7740 I [1] HOSE AS  
11. 152-7743 I [2] HOSE AS  
12. 152-7744 I [1] HOSE AS  
13. 152-7750 I [1] HOSE AS  
14. 152-7761 I [1] HOSE AS  
15. 152-7762 I [1] HOSE AS  
16. 152-7763 I [1] HOSE AS  
17. 152-7764 I [1] HOSE AS  
18. 152-7765 I [1] HOSE AS  
19. 152-7766 I [1] HOSE AS  
20. 152-9749 [1] BRACKET  
21. 152-9766 [1] PLATE-ADAPTER  
22. 152-9767 [1] SUPPORT  
23. 152-9768 [1] BRACKET  
24. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
25. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
26. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
27. 1P-4577 [2] FLANGE-HALF  
28. 1P-4578 [4] FLANGE-HALF  
29. 1P-4582 [2] FLANGE-HALF  
30. 1P-4585 [6] FLANGE-HALF  
31. 2H-6338 [3] SEAL-O-RING  
32. 2M-9780 [1] SEAL-O-RING  
33. 3D-2824 [2] SEAL-O-RING  
34. 3H-5368 [4] BOLT (7/16-14X1.375-IN)  
35. 3J-1907 [4] SEAL-O-RING  
36. 3J-7354 [1] SEAL-O-RING  
37. 3K-0360 [11] SEAL-O-RING  
38. 4J-0520 [5] SEAL-O-RING  
39. 4J-0522 [8] SEAL-O-RING  
40. 4J-0527 [1] SEAL-O-RING  
41. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 5P-6944 [2] ADAPTER  
43. 5P-7466 [2] CLIP (SLOT)  
44. 5P-7467 [2] CLIP (TAB)  
45. 5P-7468 [4] CLIP (SLOT)  
46. 5P-7469 [4] CLIP (TAB)  
47. 5P-7470 [4] CLIP (SLOT)  
48. 5P-7471 [4] CLIP (TAB)  
49. 5P-8112 [2] GROMMET  
50. 5P-8182 [4] GROMMET (46-MM ID)  
51. 5P-8244 [8] WASHER-HARD (12X22.5X2.5-MM THK)  
52. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
53. 5P-8444 [3] GROMMET (37-MM ID)  
54. 6V-0397 [8] FLANGE-HALF  
55. 6V-3822 M [8] BOLT (M10X1.5X35-MM)  
56. 6V-4349 [1] GROMMET  
57. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
58. 6V-8188 [5] NUT (1/2-13-THD)  
59. 6V-8197 M [16] BOLT (M12X1.75X40-MM)  
60. 6V-8397 [4] SEAL-O-RING  
61. 6V-8398 [9] SEAL-O-RING  
62. 6V-8634 [2] CONNECTOR  
63. 6V-8638 [1] CONNECTOR  
64. 6V-8639 [3] CONNECTOR  
65. 6V-8801 [4] NUT (3/8-16-THD)  
66. 6V-9004 [1] ELBOW  
67. 6V-9162 [1] CONNECTOR  
68. 6V-9746 [2] SEAL-O-RING  
69. 6V-9873 [2] CONNECTOR  
70. 7C-4354 [1] CLIP  
71. 7X-0313 [4] BOLT (7/16-14X2.75-IN)  
72. 7X-0346 [4] BOLT (5/8-11X2-IN)  
73. 7X-2552 M [1] BOLT (M16X2X30-MM)  
74. 7X-2553 M [3] BOLT (M16X2X40-MM)  
75. 8C-3206 [4] FLANGE-HALF  
76. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
77. 8T-4122 [12] WASHER-HARD (17X32X3.5-MM THK)  
78. 8T-4133 M [1] NUT (M10X1.5-THD)  
79. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
80. 8T-4183 M [5] BOLT (M12X1.75X40-MM)  
81. 8T-4193 M [8] BOLT (M16X2X50-MM)  
82. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
83. 8T-4223 [29] WASHER-HARD (13.5X25.5X3-MM THK)  
84. 8T-4244 M [3] NUT (M12X1.75-THD)  
85. 8T-4835 [2] BOLT (1/2-13X2-IN)  
86. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
87. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
88. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
89. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
90. 9S-4185 [4] PLUG (3/4-16-THD)  
91. 9S-8002 [1] PLUG (7/16-20-THD)  
92. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
93. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
94. 6V-0852 [2] CAP-DUST  
95. 109-1538 [1] BRACKET  
96. 4D-5042 [1] COVER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP27650388
 

4E-9659: LINES GP-HYDRAULIC FAN

4E-9659 LINES GP-HYDRAULIC FAN
S/N 2KZ1-299
PART OF 152-9753 HYDRAULIC AR
i00167084 SEBP2765
4E9659 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4579 [6] FLANGE-HALF  
2. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
3. 8T-4223 [55] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 4J-0524 [3] SEAL-O-RING  
5. 9U-2036 I [1] HOSE AS  
6. 9U-2005 I [1] HOSE AS  
7. 8C-3446 [1] VALVE-SAMPLING (STEERING, HYDRAULIC FAN OIL)  
  6V-0852 [1] CAP-DUST (HYDRAULIC TEST PORT)  
  3J-7354 [1] SEAL-O-RING  
8. 9U-2006 [1] TUBE AS  
9. 9U-2007 [1] TUBE AS  
10. 6V-0397 [10] FLANGE-HALF  
11. 4J-0522 [7] SEAL-O-RING  
12. 6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
13. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
14. 6V-8398 [2] SEAL-O-RING  
15. 101-9012 Y [1] VALVE GP-MAKEUP  
    (HYDRAULIC FAN MOTOR)
  8T-7058 M [8] BOLT-SOCKET HEAD (M12X1.75X140-MM)  
  4J-5573 [2] SEAL-O-RING  
16. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
17. 8X-4886 [1] ELBOW  
18. 6E-4576 Y [1] MOTOR GP-PISTON (HYDRAULIC FAN)  
19. 9U-2704 I [1] HOSE AS  
  6V-9005 [1] ELBOW  
20. 9U-2004 I [1] HOSE AS  
21. 5K-9090 [4] SEAL-O-RING  
22. 7M-8485 [4] SEAL-O-RING  
23. 5T-9722 I [1] HOSE AS  
24. 7D-7233 [2] CLIP (LOOP)  
25. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
26. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 9U-1371 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  9X-8250 [1] CLIP  
29. 5V-1319 [2] CLAMP-HALF  
  8T-4198 M [2] BOLT (M10X1.5X100-MM)  
30. 9U-2037 I [1] HOSE AS  
31. 9U-1381 [1] MANIFOLD  
  6V-9746 [1] SEAL-O-RING  
  6V-9182 [1] ELBOW  
  6V-8942 [1] REDUCER-O-RING  
  6V-8556 [1] NUT (1-3/16-12-THD)  
32. 8C-7534 [1] CLIP  
33. 114-5242 I [1] HOSE AS  
34. 1P-4582 [4] FLANGE-HALF  
  4J-0527 [2] SEAL-O-RING  
35. 9U-2078 I [1] HOSE AS  
  6V-8635 [1] CONNECTOR  
36. 6E-1454 [1] VALVE GP-CHECK (STEER, HYD FAN OIL CLR BYPASS)  
37. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
38. 8T-4139 M [7] BOLT (M12X1.75X30-MM)  
39. 6K-4935 [6] CLIP (TAB)  
  6K-4934 [6] CLIP (SLOT)  
40. 8T-7338 M [4] BOLT (M16X2X45-MM)  
  9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
41. 1P-3705 [1] SEAL-RECTANGULAR  
42. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
43. 7V-8532 [1] SPACER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP27650389
 

4E-9659: LINES GP-HYDRAULIC FAN

4E-9659 LINES GP-HYDRAULIC FAN
S/N 2KZ300-UP
PART OF 152-9753 HYDRAULIC AR
i01072352 SEBP2765
4E9659 LINES GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 844 WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4579 [6] FLANGE-HALF  
2. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
3. 8T-4223 [55] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 4J-0524 [3] SEAL-O-RING  
5. 9U-2036 I [1] HOSE AS  
6. 9U-2005 I [1] HOSE AS  
7. 8C-3446 [1] VALVE-SAMPLING (STEERING, HYDRAULIC FAN OIL)  
8. 6V-0852 [1] CAP-DUST (HYDRAULIC TEST PORT)  
9. 3J-7354 [1] SEAL-O-RING  
10. 6V-0397 [10] FLANGE-HALF  
11. 4J-0522 [7] SEAL-O-RING  
12. 148-8360 [1] ELBOW AS  
  6V-9182 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
13. 148-8418 [1] REDUCER AS  
  6V-8942 [1] REDUCER-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8335 [1] CONNECTOR AS  
  6V-8635 [1] CONNECTOR  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
15. 101-9012 Y [1] VALVE GP-MAKEUP  
    (HYDRAULIC FAN MOTOR)
16. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
17. 8T-7058 M [8] BOLT-SOCKET HEAD (M12X1.75X140-MM)  
18. 159-7166 CY [1] MOTOR GP-PISTON (HYDRAULIC FAN)  
19. 9U-2704 I [1] HOSE AS  
20. 148-8358 [1] ELBOW AS  
  6V-8624 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
21. 5K-9090 [2] SEAL-O-RING  
22. 7M-8485 [1] SEAL-O-RING  
23. 5T-9722 I [1] HOSE AS  
24. 7D-7233 [2] CLIP (LOOP)  
25. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
26. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 9U-1371 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
29. 9X-8250 [1] CLIP  
30. 9U-2037 I [1] HOSE AS  
31. 9U-1381 [1] MANIFOLD  
32. 148-8355 [1] ELBOW AS  
  6V-9005 [1] ELBOW  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
35. 6V-8556 [1] NUT (1-3/16-12-THD)  
36. 6E-1454 [1] VALVE GP-CHECK (STEER, HYD FAN OIL CLR BYPASS)  
37. 1P-3705 [1] SEAL-RECTANGULAR  
38. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
39. 6K-4935 [6] CLIP (TAB)  
40. 6K-4934 [6] CLIP (SLOT)  
41. 8T-4139 M [7] BOLT (M12X1.75X30-MM)  
42. 9U-2006 [1] TUBE AS  
43. 9U-2007 [1] TUBE AS  
44. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
45. 4J-5573 [2] SEAL-O-RING  
46. 8X-4886 [1] ELBOW  
47. 9U-2004 I [1] HOSE AS  
48. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
49. 5V-1319 [2] CLAMP-HALF  
50. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
51. 8C-7534 [1] CLIP  
52. 114-5242 I [1] HOSE AS  
53. 1P-4582 [4] FLANGE-HALF  
54. 4J-0527 [2] SEAL-O-RING  
55. 9U-2078 I [1] HOSE AS  
57. 8T-7338 M [4] BOLT (M16X2X45-MM)  
58. 7V-8532 [1] SPACER  
59. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
844 Wheel Dozer
Tilt Cylinder Bearings - Lubricate
844 Wheel Dozer
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
844 Wheel Tractor Hydraulic System
Tilt and Tip Cylinder
844 Wheel Tractor Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Testing and Adjusting
Lift Cylinder, Tilt and Tip Cylinder Drift - Check
844 Wheel Tractor Hydraulic System
Implement Cycle Time - Check
844 Wheel Tractor Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinder
844 WHEEL TRACTOR MACHINE SYSTEMS
Lift Cylinder Mounting
844 WHEEL TRACTOR MACHINE SYSTEMS
Tilt Cylinder
844 WHEEL TRACTOR MACHINE SYSTEMS
Service Magazine
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Improved Yokes for the Lift Cylinders Are Now Used {5102}
2007/05/21
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 844 :

COUPLING GP-PUMP
111-7331 COUPLING GP-PUMP
COOLER GP-HYDRAULIC OIL
7E-0606 COOLER GP-HYDRAULIC OIL
COOLER GP-HYDRAULIC OIL
4P-9604 COOLER GP-HYDRAULIC OIL
CARTRIDGE GP-VANE PUMP
3G-7663 CARTRIDGE GP-VANE PUMP
CARTRIDGE GP-VANE PUMP
1U-3953 CARTRIDGE GP-VANE PUMP
9D-2632 ACCUMULATOR GP-HYDRAULIC
2G-8111 ACCUMULATOR GP-HYDRAULIC
ACCUMULATOR GP-HYDRAULIC
286-3232 ACCUMULATOR GP-HYDRAULIC
CYLINDER & VALVE GP-LIFT
153-1777 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
153-1778 CYLINDER & VALVE GP-LIFT
CYLINDER GP-LIFT
4Z-6424 CYLINDER GP-LIFT
CYLINDER GP-TILT & TIP
6E-4835 CYLINDER GP-TILT & TIP
CYLINDER GP-TILT & TIP
6E-4836 CYLINDER GP-TILT & TIP
152-9753 HYDRAULIC AR
LINES GP-HYDRAULIC
152-9758 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC FAN
4E-9659 LINES GP-HYDRAULIC FAN

Truck sale:

2001 CAT 844
 
2001 CAT 844

Raw Machinery Inc
Shepherd, Montana
 
USD $88,000 
2001 CAT 844

Trends Handling
Conway, Arkansas
CATERPILLAR 844 1999
$25,800 USD 
CATERPILLAR 844 1999
- COMPACTORS
FABICK WI
United States
2008 CAT 844
USD $120,000 
2008 CAT 844

CHICAGO MACHINERY CO
Lynwood, Illinois
CAT 844
 
CAT 844

SUKUT EQUIPMENT & PARTS
San Bernardino, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.